View Full Version : unknown compressor type
fredperry
06-10-2002, 11:09 PM
Hi,
I can buy a R404 cooling unit, but the guy I'm buying it from doesn't knwo any specs of it, and nothing on the internet :(
Here's a pic, maybe someone overhere can help us out?
http://users.pandora.be/bernadette.peeters1/glenn/IMAGE5.JPG
Thx :)
OPPAINTER
06-11-2002, 08:47 AM
fredperry,
Good of you to come my man, Welcome to Xtreme. Hows the cooling rig of yours?? Did you get better seating on the CPU??
Sorry, Can't help with the ID of the Compressor, no clue myself.
OPP
fredperry
06-11-2002, 08:54 AM
No, haven't found the time (yet) :(
I'm in the middle in exams and allready got a bad one due to my prometeia ;)
But, a friend of mine got his one working fine, giving him temps of -7°C idle and 0°C under full load with a XP1900+@1817@1.85v
(just prelimary results)
He used four spacers, whereas I only use one (received only three, so I'll have to find me some).
Also I'm using AA instead of ASIII, which should gave me a slight gain also.
His results give me hope :)
OPPAINTER
06-11-2002, 09:07 AM
I'll bet you any amount that after you slap on some more spacers you get a much greater Clock, night and day probably.
OPP
Kurupt
06-13-2002, 10:53 AM
anyway you can get a more clear shot of that ID
fredperry
06-13-2002, 10:58 AM
Originally posted by Kurupt
anyway you can get a more clear shot of that ID
I'll ask him. this was taking with his wbcam i believe...
//edit: Damn, that was the best he could do :(
but if you tell me what to look for he'll write them down and give'm to me...
Petrus
06-13-2002, 01:21 PM
Fredperry,
That label is not from a compressor, is from a display-freezer. In Italian display=expositore. Ask if the guy can send you the compressor label, with that would be easier to find the compressor data on the web
fredperry
06-13-2002, 01:35 PM
Send him an email,I hope he finds something, 'cause he's studying for cooltechnician, so normally he would have found something, maybe this was the only thing he could find?
Anyway, he's going to make a heatexchanger for it, give it a quick test en pr0lly sell it (hopefully to me ;))
But I've got some backup: R134a compressor (http://users.pandora.be/bernadette.peeters1/frigo/100-0014_IMG.JPG)
(should be enough for the vidcard ;) ASHRAE: -10°C@226w)
Originally posted by Petrus
Fredperry,
That label is not from a compressor, is from a display-freezer. In Italian display=expositore. Ask if the guy can send you the compressor label, with that would be easier to find the compressor data on the web
Petrus
06-13-2002, 01:51 PM
Originally posted by fredperry
(should be enough for the vidcard ;) ASHRAE: -10°C@226w)
LOL :)
It's a Danfoss ;) it will do the job.
AndrOvr
06-13-2002, 01:56 PM
Hey petrus,
Could u check you Hotmail or your netvisao mail...?
U know who M I ;)
fredperry
06-14-2002, 09:47 AM
Aspera T12168gk-906da24
embraco (http://www.embraco.com/ingles/produtos/t/abaixo.htm)
capacity: 462 - 964w
temps: -40°C to -10°C
looks nice...anyone got experience with these compressors?
Petrus
06-14-2002, 09:59 AM
I have two freezers using Embraco compressors, they are made In Brazil and no problems so far :)
fredperry
06-14-2002, 10:01 AM
Originally posted by Petrus
I have two freezers using Embraco compressors, they are made In Brazil and no problems so far :)
hehe, good news ;)
Think I'll pay the guy a visit and have a look how its working...
Mentaly
07-01-2002, 11:16 AM
Originally posted by fredperry
No, haven't found the time (yet) :(
I'm in the middle in exams and allready got a bad one due to my prometeia ;)
But, a friend of mine got his one working fine, giving him temps of -7°C idle and 0°C under full load with a XP1900+@1817@1.85v
(just prelimary results)
He used four spacers, whereas I only use one (received only three, so I'll have to find me some).
Also I'm using AA instead of ASIII, which should gave me a slight gain also.
His results give me hope :)
Hi Fredperry
Check these temps this is on an XP 1600+ @ 2008 Mhz Prometeia cooled -7 under full load after 4 hours - 15 idle. I have 4 spacers on each screw.
Menty
http://ny.liquidninjas.com/Pics/Prometeia/primeprometeia2.JPG
fredperry
07-01-2002, 12:29 PM
A friend of mine gets about the same temps you do. calantak send me some extra spacers and tommorrow I'll rebuild the prometeia with 4 spacers on each screw and some ASIII... I'll let you know how it goes