Look at what I have and help me with fan placement and case mod. Thx

[BMORIN]

I have many fans in possession to choose from (not all will be used obviously). Help me pick fans, placement, appearance, case mods, etc.

Here's the case they're going in:
Chieftec Silver Aluminum case w/ acrylic side window:
http://www.newegg.com/app/Showimage...-125-313-09.JPG

Here are all the fans in my possession:
3 SF2's 75cfm/48db/8.4w
3 SF2's (cool mod)
2 80mm UV sensitve fans 30 cfm/27db (I have 2 UV (black) lights in case along with UV sensitive cables)
2 92mm Tornado's 119cfm/56db/12.5w
2 92mm blue led 44cfm/30db/2.28w
1 120 blue led 69cfm/39db/4.8w
Now, what the hell do I do with some of them, lol.

Here's what I'm thinking so far:
2 SF2's (not the cool mod) in front of case (since they probably won't be seen).
2 SF2's (cool mod) in the back of case.
SF2 (cool mod) on the cpu

Now, here's where I'm unsure (unsure about air cooling performance, unsure about looks, unsure about noise somewhat)

Do I.....

A) Mod side case for the 2 80mm UV sensitive fans
B) Mod side case for 1 92mm blue led fan
C) Mod side case for 2 92mm blue led fans
D) Mod side case for 1 92mm Tornado

E) 1 Blowhole for 120mm blue led fan
F) 1 Blowhole for 1 92mm Tornado
G) 2 Blowholes for 2 92mm blue led fans

(All my fans will be hooked up to Rheobus for rpm control with 20w per channel, and hooked up to digidoc5 for rpm monitoring)

Decisions, decisions, decisions, what's a man to do.

What would you do? Remember - the best combination of cooling, looks, and noise (eh, somewhat)

I would really appreciate as much input on this as I can get.

[GVCryan]

I would go 2 coolmods in the back blowing in.

1 SF2 on the proc.

2 UV's in the front blowing in (they show through and look sweet.

All of your BLED's in the top. Blowing out

1 Coolmod blowing in on the side.

2 SF2 on the bottom blowing up.

Ditch the Tornado.

Or, put the tornado on the bottom and the 2 sf2's in the PSU.

Intake = Good

[BMORIN]

Thx for the input