View Full Version : Vdd mod on 8rda+ v.1.1
chr!s
02-02-2003, 07:33 AM
I have a question to all vdd-modders ;)
which resistors do you use?
which are "healthy" for the board??
I'll use a 620ohm... or should I use another??
After this mod the board should able to run @ FSB 200 sync mode
BrainStorm
02-02-2003, 09:10 AM
Originally posted by chr!s
I have a question to all vdd-modders ;)
which resistors do you use?
which are "healthy" for the board??
I'll use a 620ohm... or should I use another??
After this mod the board should able to run @ FSB 200 sync mode
chr!s, PiLsY has put together an excellent consolidated thread on the 8rda+ vdd mod here:
http://www.xtremesystems.org/forums/showthread.php?s=&threadid=8626
should answer your questions!
OPPAINTER
02-02-2003, 09:30 AM
Originally posted by chr!s
I have a question to all vdd-modders ;)
which resistors do you use?
which are "healthy" for the board??
I'll use a 620ohm... or should I use another??
After this mod the board should able to run @ FSB 200 sync mode
I used a 1k VR myself.
OPP
tweaky
02-02-2003, 10:01 AM
Ditto, same as OPP :)
chr!s
02-02-2003, 10:02 AM
thx for your replies... I think I can find the correct resistor...
TechTones
02-02-2003, 10:41 PM
A fixed resistor of 680Ohms gave me 1.856v. Once in a while it spikes to 1.87v for a couple secs.
I can do a FSB of 226 but backed it down for stability.
Xizten
02-02-2003, 11:56 PM
TechTone, Singel or dual ddr @ 226 FSB?
TechTones
02-02-2003, 11:59 PM
Single
But my buddy did 225 Dual
Xizten
02-03-2003, 12:06 AM
ok, thx
I'll do mine whit 750 ohm and dual, wounder how high it will go...
BMORIN
02-03-2003, 08:40 AM
680ohm gave me 1.808 - perfect. I put some as3 under the stock heatsink on the NB and glued a 60mm fan to it and everything is run fine and stable.
silky
02-06-2003, 03:44 PM
I have a dumb question? Does a resistor have positive and negative? I just bought a 680-Ohm resistor from Radio Shack and want to make sure I solder it correctly. You help is appreciated.
Holst
02-06-2003, 03:59 PM
no, a resistor has no polarity so you can solder it any which way..
silky
02-06-2003, 04:07 PM
Thanks for your help.