PDA

View Full Version : 300fsb HZ timings????



Agent_Johnson
03-04-2006, 09:22 PM
I have seen some settings for lower overclocks but I have my Opteron 165@2709Mhz. 301fsbX9 | Httx3 | Ram is on the 166 divider running at 246mhz. I have tried every setting under the sun to run the ram faster but I can't even get into windows on the 180 divider regardless of settings, unless there's some magic combo??? So I guess it's time to tighten up my current overclock. What are some good tight timings that should work at this overclock?

Also, on the 704-2bta bios the setting for DRAM drive strengh has like 4 normal and 4 weak settings. Normal 1/Weak 1 | Normal 2/Weak2, etc. Which one do you recommend? There is no simple 1-7 setting. Thanks!

I am using a DFI nF4 Ultra-D and 2gb G.Skill DDR500

Agent_Johnson
03-05-2006, 01:11 PM
My 165 has a X9 multiplier. I do know that it will run 1:1 with 267fsb. Maybe that's the limit. The latest batch of this ram doesn't seem to overclock worth a poo.

GSKILL TECH
03-06-2006, 11:08 AM
try this

DRAM FREQUENCY SET: 180 (around DDR540)
COMMAND PER CLOCK: ENABLE (1T)
CAS: 3
TRCD: 4
TRAS: 8
TRP: 4
TRC: 8
TRFC: 14
TRRD: 2
TER: 2
TWTR: 2
TRWT: 3
TREF: 3684
TWCL: 1
DRAM BANK INTERLEAVE: ENABLE

DQS SKEW CONTROL: AUTO
DQS SKEW VALUE: 0
DRAM DRIVE STRENGTH: 7
DARM DATE DRIVE STRENGTH: 3
MAX ASYNC LATENCY: 8NS
DARM RESPONSE: NORMAL or FAST
READ PREAMBLE TIME: 6NS
IDLECYCLE LIMIT: 256
DYNAMIC COUNTER: ENABLE
R/W QUEUE BYPASS:16
BYPASS MAX: 7
32 BYTE GRANULARITY: DISABLE