View Full Version : post temps
JBELL
06-05-2002, 01:40 PM
ok guys whatcha got?
I live in the desert so cooling is a HUGE issue for me...
I was suckered into the swiftech craze anf got me a MCX462a HSF
with a 80mm 68cfm Delta blowing hard on it....
my room temps get into the high 80's / low 90's
MBM5 reports my cpu is running after 2+weeks of full load while folding and SETI (since creating the team) with a temp of 45C - never higher but sometimes lower.
How does this fair against your temps?
Smizack
06-05-2002, 02:35 PM
I've hit 41c one or twice, but never 42 yet. That's ambient with the a/c off.
I idle around 50c! :( I think my cak38 is on its last leg! 2.1 vcore
Hardass
06-05-2002, 03:06 PM
Alpha Pal 8045/Delta 68cfm @39c-80F room temp. Full load.
Smizack
06-08-2002, 11:40 PM
Hrmm... Hsf dying, temps rising. Damn I'm glad I got a new digi doc.
JBELL
06-09-2002, 12:07 AM
Originally posted by Smizack
Hrmm... Hsf dying, temps rising. Damn I'm glad I got a new digi doc.
did you contact gooch for a hsf?
Smizack
06-09-2002, 12:23 AM
Originally posted by JBELL
did you contact gooch for a hsf?
Gooch= Teh Fuc**ng man!:D :D :D
stompah
06-09-2002, 03:18 PM
Ok,
My new system I built, specs:
KK266-r
1800+ default speed
2x256mb of pc100/pc133 (pc100 does 150fsb :) )
30g WD 5400rpm HD
Sony floppy and 52x CDROM drives
Aopen case with 250w PSU (no case fans)
Cooling:
Global Win FOP32
temps with ambient being 76f are at 49c full load with 'CPU stability test'
At a ambient temp of 63f I get low 40c's usually 42-3c
note this rig has sides on!
EDIT: I just remembered this is new 'folding' rig #1!
stompah
06-09-2002, 05:03 PM
Ok I mounted a 92mm delta to the front. So after some dremel and soldering skillz my temps are back down :)
AndrOvr
06-11-2002, 06:42 AM
Alpha Pal 8045 w delta 68cfm w thunderbird 1.4@1700 I get 38c max load vcore 1.98 :D
Hardass
06-11-2002, 06:45 AM
Originally posted by AndrOvr
Alpha Pal 8045 w delta 68cfm w thunderbird 1.4@1700 I get 38c max load vcore 1.98 :D
Nice temps, And welcome to Xtreme.
Chong345
06-15-2002, 06:49 PM
axo2000 oc'ed to 1860
after running seti and folding all day temps are around 55 cm with room temp at 28
I live in the mojave desert and I have a swamp cooler. I have my 1.6a@2.2 running at around 29 to 35 during idle depending on what time of day it is. It's never got above 42 at full load. It usually stays at around 40 at full load. I bought an Arkua 8568 HSF for it. It was like 17 dollars I think and was pleasantly surprised with its performance. I use MBM5 to check temps.
I just built a new AMD XP1800+ retail on an a7v333 mb. I put the stock HSF on it and nearly had a heart attack when it climbed to 61 full load. I have to use probe to monitor the temp since MBM5 does not detect anything on the mb. Being in the desert it kinda makes me mad that AMD has such a crappy HSF for their retail chips. I put a YS tech 60mm fan on it and the full load dropped to 57 but still too high IMO. I put a coolermaster HSF on it but it did no better. I guess I will put an ax-7 on it that I have laying around with a 50 CFM Sunon fan.
Busta
07-12-2002, 08:07 PM
axp1900+@1725 = 43c idle / 49c load cooled by an AX7 w/ 80mm Panaflo
room temp: 25°C
CPU temp: 42°C (50°C load)
P4 1.6@2.4 1.7v - Standard Intel cooler
Keeper
07-18-2002, 10:19 PM
I am using a Swiftech MCX462 on my KR7A Raid with an XP1900+ it idles at 37-39C and 42.5 @ 1600 at full load. 42-44C at idle and 44-47.5 @ 1776 at full load. I live in El Paso and these are summer temps at 80-85 F indoors.
ezeKieL
07-20-2002, 01:12 PM
i live in the hot ass desert also...39c idle, 43-44c load
SPQQKY
07-30-2002, 05:11 PM
XP 2000+ @ 1.83GHz maxed at 51c with AOC CUD-915 and ambient room temp of about 30c. This is internal diode reading on 8K3A+ after about an hour of SOF2.
Tweaked!
07-30-2002, 06:02 PM
p///800@900 1.8v
room temp 23c (a/c set on 73)
case temps 26c
cpu temps 37c
I'm cheating a little, I've got the a/c duct for my office directed into the case.:p