View Full Version : MicroDICE/LN2-C1&MicroDICE/LN2 Smart Solid
Antiloop
12-22-2005, 08:20 AM
Hi,
These are my new babies which I will use them my next oc's...
http://server2.uploadit.org/files/antiloopln2-DSCF0050.jpg
It coated with chrome and bottom sıde of the block same as chilly1's ...(MicroDICE/LN2-Chilly1 Style ;) )
http://server3.uploadit.org/files/antiloopln2-DSCF0049.jpg
MicroDICE/LN2-C1 & MicroDICE/LN2 Smart Solid together, I use 60mm diameter solid copper when I was made MicroDICE/LN2 Smart Solid. As you see, I polished it :p:
http://server3.uploadit.org/files/antiloopln2-DSCF0024.jpg
http://server3.uploadit.org/files/antiloopln2-DSCF0045.jpg
http://server2.uploadit.org/files/antiloopln2-DSCF0027.jpg
http://server3.uploadit.org/files/antiloopln2-DSCF0032.jpg
http://server3.uploadit.org/files/antiloopln2-DSCF0047.jpg
Inside of the Smart Solid
http://server2.uploadit.org/files/antiloopln2-DSCF0060.jpg
2xMicroDICE/LN2-C1 and MicroDICE/LN2 Smart Solid are waiting for me :yepp:
Special Thanx to Chilly1 for permitted me to use his desing...
(Eng my 2nd lang, I am triying to do my best)
Tribal84
12-22-2005, 09:32 AM
They look really nice ... i hope your containers perform as good as they looking ...
ohh my bad english
Godmaster
12-22-2005, 12:10 PM
Measure??
Really Beautiful;)
afireinside
12-22-2005, 12:25 PM
Walls look pretty thick on the solid... Is the chromed one solid or brazed? They don't need to be anywhere near that tall either ;) Hope they work well!
[XC] moddolicous
12-22-2005, 01:42 PM
Thats like the shiniest I've ever seen a DI/LN2 tube. I guess they're one peice. Cant wait for some results.
gloatlizard
12-22-2005, 02:25 PM
what will be the machine that u'll use for ur clock with these babes?
Antiloop
12-22-2005, 03:16 PM
They look really nice ... i hope your containers perform as good as they looking ...
ohh my bad english
Thank you Tribal84, I used chrome one a few times (I am talkıng about my chilly1 style container) it is not that good when ı use it with dry ice cos of the bottom part; I can not achieve 78.5°C surface temp which conrad achieved it before, maybe my digital thermometer shows wrong or the dry ice which ı use different than conrad's cos it was a one block of ice nearly 1 kg.(I broke the ice little by little and used it) However; I think that C1 container has advantages with LN2 cos ı saw that ln2 spins bottom part of the container if I fill only 1/3 with LN2.
what will be the machine that u'll use for ur clock with these babes?
I did not use solid one yet;I used chrome one&LN2 with xp 1.7 and nf7-s, ı achieve 2940 mhz but I burned my nf7-s while ıt was booting due to condensation on the board; ı used 3 layers of conformal coating and 21.5 mm armaflex outside the container which shows above(I must also use armaflex on the mobo I know) , but they cracked 20 min later after ln2 filling. So if there is no evidence lie super pi etc (but ı have photos and videos for this session ;) ) forget about it :toast: ;)
Antiloop
12-22-2005, 03:23 PM
Measure??
Really Beautiful;)
Thank you, I will add measures of the blocks... If you don't understand any dimensions of the containers please ask ;) (Sorry for my Eng)
http://server3.uploadit.org/files/antiloopln2-edited.JPG
Antiloop
12-22-2005, 03:36 PM
Thats like the shiniest I've ever seen a DI/LN2 tube. I guess they're one peice. Cant wait for some results.
Thank you very much moddolicous :toast: I will achieve good results with these babies asap :toast:
what will be the machine that u'll use for ur clock with these babes?
I am not sure but ı can use p4p800 with dothan or dfi nf3 250G with 3000+ or dfi nf4 ultra d with 3.0+ or 3.2+ (I did not make a decision for the mem's either).As you know it depends on amount of the money, good cpu's and mem's; for example if u use incapable mem's it effects your machine (car) like a hand brake :slapass:
Antiloop
12-22-2005, 03:37 PM
Walls look pretty thick on the solid... Is the chromed one solid or brazed? They don't need to be anywhere near that tall either ;) Hope they work well!
Thank you; chrome one brazed and as you can see polished one solid ;)
Eldonko
12-22-2005, 03:43 PM
Very nice looking tubes. :woot: How does the chrome affect the temps?
Thats an awesome tube:toast:
Imo, the most important thing is how a tube can sustain less fluctuation in temp. with cpu @ load...
afireinside
12-22-2005, 06:24 PM
So around 12 and 10... Just looks really big for some reason I guess.
k|ngp|n
12-22-2005, 06:42 PM
The copper one looks tuff...well done. I bet it holds a load great. :toast:
Antiloop
12-23-2005, 03:15 AM
Very nice looking tubes. :woot: How does the chrome affect the temps?
I did not coated bottom surface of the container ı polished it as same as solid one. I though that it had negative conductivity effect cos it's coating and we could not get smooth surface but it shines so I polished them with 2000c sand paper.
The copper one looks tuff...well done. I bet it holds a load great. :toast:
I am anxious about that cos ı dıd not use it yet :cool: