View Full Version : heat sinks
JBELL
06-01-2002, 10:04 PM
ok guys - kind of a poll here..
What heatsink is in your case?
Swiftech MCX462 here 80mm DELTA 68CFM fan
Hardass
06-01-2002, 10:14 PM
Alpha PAL 8045/Delta 68cfm
Thermalright AX7/Delta 68cfm
GlobalWin CAK38 :( Delta 60mm (I think)
DaGooch
06-01-2002, 10:20 PM
The only air rig I have is using the MC462r1.1 with Sanyo Denki 80mm 55cfm fan.
Smizack
06-01-2002, 10:27 PM
Crap now. upgrading in the process of upgrading...
JBELL
06-02-2002, 01:37 PM
Originally posted by Smizack
Crap now. upgrading in the process of upgrading...
Hey Gooch got any scraps for the lonely xtreme folders in need?
maybe a rental?
DaGooch
06-02-2002, 05:04 PM
Sure, PM me an address and I have some Pure copper heatsinks just lying around doing nothing. Actually, quite a few of them just sitting there.
Smizack
06-02-2002, 09:16 PM
Originally posted by JBELL
Hey Gooch got any scraps for the lonely xtreme folders in need?
maybe a rental?
Rental! Heh. that's funny!:D
DaGooch
06-02-2002, 09:21 PM
Originally posted by Smizack
Rental! Heh. that's funny!:D
Not a rental, for the folding team! :D
Want this one? http://www.dynatron-corp.com/proddetail.asp?cid=6&sku=DY1206BH-625
JBELL
06-05-2002, 01:37 PM
Originally posted by DaGoochMeister
Not a rental, for the folding team! :D
Want this one? http://www.dynatron-corp.com/proddetail.asp?cid=6&sku=DY1206BH-625
hmmmm..... needs a review first! :D
DaGooch
06-05-2002, 01:58 PM
Originally posted by JBELL
hmmmm..... needs a review first! :D
j00 n00b!
Smizack
06-05-2002, 02:34 PM
Originally posted by DaGoochMeister
j00 n00b!
LOL!:D
Dramen
06-11-2002, 07:46 AM
Alpha PAL 8045/YS-Tech RPM SpeedDial
Vantec 6035/YS-Tech 31cfm
DexterHolland91
06-11-2002, 08:55 AM
Kanie Wing with 2x 24cfm YStechs.
Dramen - Good to see you again. How have you been these days? I see lots of familiar faces around these forums. :D
fredperry
06-11-2002, 08:58 AM
used a wbk38 untill I got my bong up and running...It was nice for his prize, nothing more.
I'm just not into aircooling really, started after few months with watercooling, and now phase change.
Dramen
06-11-2002, 09:51 AM
Originally posted by DexterHolland91
Kanie Wing with 2x 24cfm YStechs.
Dramen - Good to see you again. How have you been these days? I see lots of familiar faces around these forums. :D
Hey DexterHolland! Doin OK and yourself? Good to see you too!!! :) Yeah, I noticed some familiar faces too! :D
Ahh some fresh air does me good. ;)
DexterHolland91
06-11-2002, 10:08 AM
I'm doing good too, thanks for asking. Yep, that fresh air definitely can't do any harm. ;) Maybe this place will start to flourish will all these new members? Hope so.
Silversink
06-11-2002, 11:27 AM
Stricly watercooled But I got a AX-478 (Backup hsf) which is the best performing Socket 478 heatsink out there at this time.
Paul.K
06-14-2002, 01:58 PM
Alpha Pal 8045 / Delta 80mm 65cfm
Swiftech MCX 462 with delta EHE and add. diy activ control.
AndrOvr
06-15-2002, 01:21 PM
Pal 8045 w delta 68Cfm :D
Chong345
06-15-2002, 06:46 PM
ax-7 84cfm vantec
Hardass
06-15-2002, 06:57 PM
Originally posted by Chong345
ax-7 84cfm vantec
Thats the vantec tornado fan right does it have speed control?
Chong345
06-15-2002, 06:59 PM
mine doesn't have one but you could get one...
Hardass
06-15-2002, 07:01 PM
that thing has got to be loud.
Chong345
06-15-2002, 07:04 PM
no louder than the delta 80cfm. ITs kinda loud but I have 2 92mm vantecs that push 119 cfm a piece so I don't notice anything else but those. They sound like a mini vacum cleaner. Also I'm fixing to mod my case to add a 120mm blowhole. I have got to even out the airflow in my case. I have 318 coming in but only 120 going out.
Hardass
06-15-2002, 07:08 PM
I don,t want anymore noise in my comp room, thats why i decided to go H20. Got 3 rigs running in there sounds like a airport.
Originally posted by Hardass
I don,t want anymore noise in my comp room, thats why i decided to go H20. Got 3 rigs running in there sounds like a airport.
H, what water plant did you decide to get? I think that's next on my agenda!
Hardass
06-15-2002, 07:21 PM
Swiftech Quiet Power Custom, the Gooch was selling.
mdzcpa
06-15-2002, 07:41 PM
Multimedia Rig: HHC-001 Heat Pipe with YS Tech
Server/Seti Rig: Coolink U1P2 with twin YS Techs
Kid's Rig: SK6 with YS Tech
LutaWicasa
06-16-2002, 09:55 AM
Well, let's see................AVC Sunflower, GlaciatorII, GlaciatorII Lite, ThermoEngine w/8k Delta. Got another Thermo w/7k Delta that I use for bench testing, and an SK6 is enroute :)
Also got 2 H2O set-ups to put together when I manage to find the time :D
synth
06-17-2002, 09:39 PM
Thermalright AX7/Delta 80cfm (80mm)
Smizack
06-17-2002, 09:48 PM
hmmm... All I can say is (without sounding gay) I love gooch!!
Originally posted by synth
Thermalright AX7/Delta 80cfm (80mm)
Welcome to the forums! Great HS/fan!
stompah
06-18-2002, 03:05 AM
Main rig has a lapped OCZ Gladiator with some crappy thermaltake fan on it.
Folding rig has a stock AMD HS/F... no overclocking so why waste a perfectly good HS?
HS use to obtain temps in my sig. A 600grit lapped Alpha PAL6035 with a 7500rpm black label delta.
Can I have a free HS too? JBell I can write up a review for you ;)
Chong345
06-18-2002, 03:14 AM
i'm still waiting on my ax-7 in the mail. I got a defective one and it cost me a xp2000 to find out. I'm a little pissed still about the whole thing. Anyway when I get the ax-7 I'm goona slap a 84cfm vantec on there.
Silversink
06-18-2002, 11:13 AM
Originally posted by Chong345
i'm still waiting on my ax-7 in the mail. I got a defective one and it cost me a xp2000 to find out. I'm a little pissed still about the whole thing. Anyway when I get the ax-7 I'm goona slap a 84cfm vantec on there.
Chong, Just out of curiousity what was defective about it?
synth
06-18-2002, 12:14 PM
How does the 84 CFM vantec fan compare to the 80cfm Delta e.g noise , air pressure, RPM......
Silversink
06-18-2002, 01:07 PM
Originally posted by synth
How does the 84 CFM vantec fan compare to the 80cfm Delta e.g noise , air pressure, RPM......
Vantec 80mm Tornado:
Model No: TD8038H
Dimension: 80x80x38mm
Weight: 175g
Rated Voltage: 12VDC
Rated Power: 9.1W
Rated Current: 0.76Amp
Fan Speed: 5700RPM
Air Flow: 84.1CFM
Noise: 55.2dBA
------------------------------------------------------
Delta 80mm 80cfm
Specifications:
Model: FFB0812EHE-FOO
Bearing Type: Two Balls
Weight: 170g (6.00 oz)
Rate Voltage: 12VDC
Operating Voltage Range: 7 to 13.8
Rated Current: 0.9
Fan Speed: 5700RPM
Maximum Air Flow: 80.16CFM
Noise: 52.5 dBA
synth
06-18-2002, 01:28 PM
Cheers Silversink,
damn it makes heaps more noise for just 4 more CFM but draws less current hrrrrm not bad but i'll stick with the delta, it kicks arse... specially with the AX-7
Chong345
06-18-2002, 02:29 PM
the ax-7 clip was backwards. I tried for an hour to get it to sit on the core anyway but just by looking at it I could tell that it wouldn't.
DexterHolland91
06-18-2002, 06:09 PM
Wow that thing takes 9.1watts...
synth - Just because it is rated at more dBA doesn't mean it would be any less tolerable. I don't know personally, but IMHO the pitch of the fan matters just as much as a dBA rating.
synth
06-18-2002, 06:18 PM
yer true cuz i went from a 60mm Delta Black Label "screeemer" on a Alpha PAL6035 to the AX-7 with the 80mm Delta and the pitch is much lower than before...BUT there is still alot more noise and for 1db its double the noise pressure but i guess it all comes down to perception of what is loud....
deerhunter
06-19-2002, 09:20 AM
Just ordered the AX7 with 84CFM, controller, and earplugs!
:rolleyes:
For my Amd system AX-7 with 50 cfm Sunon
For my P4 system Arkua 8568
Both keep my temps below 40 degrees full load.
Neptune5k
06-19-2002, 09:03 PM
Well my main rig is a phase-change setup, and my secondary system is H20 cooled. But i do have a box that was put together with parts that have been passed down through the upgrades, and it has a good 'ol SK-6 on it with that YS-Tech 40cfm screamer on it.
DarkMinion
06-24-2002, 02:18 PM
Im running with the original Glaciator at the moment but am about to make the leap to water.
General_B
06-25-2002, 10:05 PM
Thermalright AX7/OCZ 60cfm 40dBa
Chong345
06-26-2002, 02:02 AM
I'm lovin this ax-7 and vantec 84 cfm.
Temps at full load are 45C. This is with my xp2000 oc'ed to 1.92ghz at 1.95v.
BigDov
06-27-2002, 02:52 PM
Swiftech MCX462 w/ Delta 68cfm, soon to be Vantec 84cfm :)
rlemieux
06-30-2002, 05:31 PM
AX478 with a 92mm 119CFM Tornado on top...... Wooooshhhhhhhh!Can you hear me?????Wooooossshhhhhhhh!
ezeKieL
07-20-2002, 01:07 PM
pal8045 and vantec 80mm....after i got this fan from the one it came with....my temps dropped 6-8 degrees celcius at both idle and load...worth the noise to me....sup chong nice to see your a member here as well!
himura-dono
07-21-2002, 11:41 PM
i'm gonna stick an slk800 and a vantec 92mm tornado *modded to fit* on my fiancee's soon to be xp1600+