Unlocked Athlon XP 1600+ @ 2100+

[SpiderMAN]

And that's it. I'm unlocking my Athlon XP (about 6 times) this time i have the best scores. Just look for that
http://aquila.wsei.krakow.pl/~spiderman/pliki/BestEver.jpg
As you seen on screenshot my Athlon XP 1600+ AGOIA 0224 runs stable 1764 MHz, temperatures is high but i will polish my Volcano 7+ to a mirror ;)
Wanna Compare in 3DMark2001SE - Just DO IT!!!
TO unlocking i have used PULSAR Volt
This is the distributor in Poland site -> http://www.pulsar-glue.net/
http://aquila.wsei.krakow.pl/~spiderman/pliki/PULSAR.jpg
That's it for now!
P.S. I have used to unlocking the Tom's Hardware way. Warranty goes to hell ;) And the best thing is the mobo. An old good SOLTEK SL-75KAV (VIA KT133A), RAMos 256MB SDRAM PC133 CAS2, TT Volcano 7+ LOW, TT Active Memory Cooling Kit.
:mad:

[antipop]

Your temp are a bit high, that chip should handle more MHz, i've had a hundred more on mine before i killed it trying to unlock it :(

[LightningCrash]

yeah, I ran my AGOIA 0224 Z 1600+ at 1800MHz first try. I've got a picture of it POSTing at 1974, the BIOS was acting funky though (Displayed CPU speed but not memory information, any ideas?)....

I think it's still dying to go higher, I should stick some prometeia down its throat ;)

[SpiderMAN]

Originally posted by LightningCrash
yeah, I ran my AGOIA 0224 Z 1600+ at 1800MHz first try. I've got a picture of it POSTing at 1974, the BIOS was acting funky though (Displayed CPU speed but not memory information, any ideas?)....

I think it's still dying to go higher, I should stick some prometeia down its throat ;) I think your problem is memory. Maybe change the frequency asynchronically and change CAS values for RAM, give their highest voltage.
Tell me - what type of cooler do you have used to have 1800 MHz?
AC or WC?
What is the brand name of your cooler (for example TT Volcano 7+ is mine)? tell me more about your mobo, configuration, how you unlock your CPU multipliers?

[Dissolved]

SpiderMAN-

#1.. Why aren't you folding for US?

#2... What os/gui is that?

#3.... 57c is reallt high.. i wouldnt press it over 50c. or you wont have it that long.

[Tweaked!]

I've had my 1600's as high as 1875 on air using the Coolermaster hcc-002. Kept it around 44c under full load ( looping 3dmark and running f@h). Had room for more, but this was my duallie set up and that was the max limit for that mobo (12.5x150). One of those chips got destroyed, but the other one is currently awaiting another mobo for the folding farm. As soon as I get the new mobo, I pplan to find out just how far I can take it.:)

[LightningCrash]

Originally posted by SpiderMAN
I think your problem is memory. Maybe change the frequency asynchronically and change CAS values for RAM, give their highest voltage.
Tell me - what type of cooler do you have used to have 1800 MHz?
AC or WC?
What is the brand name of your cooler (for example TT Volcano 7+ is mine)? tell me more about your mobo, configuration, how you unlock your CPU multipliers?

my setup:
EPoX 8k3a+
512mb OCz DDR400
WC parts:
MAZE2
EHEIM 1250
Hayden 401 Radiator (5"X9" Alu fins)
Delta 150CFM 120mm fan ducted to the 401.
AS2 thermal paste

I didn't unlock the chip, as I was shooting for somewhere around 2GHz at a little over 190FSB. 2.1GHz would have been nice, but I'd have to make it to 200FSB to pull that off. The setup would crap out after 185, could partially POST at 188 but that was it. It was happy at 183, I could even load windows. More voltage didn't help, I had it at 1.9, 2.0, 2.1 and it showed no improvement. I've got a 2200+ in the machine now, the 1600+ is about to go on cluster duty. I may pull it out later and crank it up on a different setup, but I think I'm gonna stop screwing with my machine for a little while.

I later learned that the OCz needs something like 2.7v to do its thing at DDR400, and I had it running at 2.4v or 2.5v at the time. That may explain it crapping out at 185+FSB.

[antipop]

Originally posted by Dissolved
SpiderMAN-

#1.. Why aren't you folding for US?

#2... What os/gui is that?

#3.... 57c is reallt high.. i wouldnt press it over 50c. or you wont have it that long. Look at the top left and you can see it's written windows xp, anyway it's a nice gui

[Remman]

This is daily use for me. Ive had the chip at 1850 mhz as you can see from my compare link in my sig. I havent unlocked it yet because i'm lazy.

http://www.v2x.net/remman/wcpuiddaily.JPG

[#ball3r]

Here is my locked 1600+ (10.5x174). I'm also too lazy to unlock it, but do have a kit already. It's air cooled by Thermalright slk-800 w/crystal led speed control fan. My normal temps at this speed are 30 system/34 cpu. I can run higher but my gigabyte 7vaxp is limiting me to under 175fsb. Here are my quick specs...

XP 1600+ agioa "9" green
Gigabyte 7VAXP (Epox 8RDA+ on the way)
MSI Geforce 4 4400 128 (310/615)
Corsair XMS3200 512 ca2-SOLD (getting 2x256 corsair xms3500 ca2)
Maxtor ata133 40gb fbd (2 maxtor ata133 80gb 8mb cache for raid 0 will be here soon)

[ WCPUID Version 3.1a (c) 1996-2002 By H.Oda! ]

Processor #1 : AMD Athlon XP (Model 6) / BF5A702D
Platform : Socket A (Socket 462)
Vendor String : AuthenticAMD
CPU Type : Original OEM Processor (0)
Family : 6 (7)
Model : 6 (6)
Stepping ID : 2 (2)
Brand : ----
APIC : ----
HT Log.CPU Cnt : ----
Name String : AMD Athlon(tm)

Internal Clock : 1826.64 MHz
System Bus : 347.93 MHz DDR
System Clock : 173.97 MHz
Multiplier : 10.5

L1 I-Cache : 64K Byte
L1 D-Cache : 64K Byte
L1 T-Cache : ----
L1 Cache : ----
L2 Cache : 256K Byte
L2 Speed : 1826.64 MHz (Full)

MMX Unit : Supported
SSE Unit : Supported
SSE2 Unit : Not Supported
MMX2 Unit : Supported
3DNow! Unit : Supported
3DNow!+ Unit : Supported

Host Bridge : 1106:3189.00 [VIA Apollo KT400]
South Bridge : 1106:3177.00 [VIA VT8233A]
VGA Device : 10DE:0251.A3 [NVIDIA GeForce4 Ti 4400]
Memory Size : 512M Byte
Memory Clock : ----

OS Version : Windows XP Version 5.01.2600
-------------- : -----------------------------------
StdFunc 0 : 00000001 68747541 444D4163 69746E65
StdFunc 1 : 00000662 00000000 00000000 0383FBFF
ExtFunc 0 : 80000008 68747541 444D4163 69746E65
ExtFunc 1 : 00000762 00000000 00000000 C1C3FBFF
ExtFunc 2 : 20444D41 6C687441 74286E6F 0020296D
ExtFunc 3 : 00000000 00000000 00000000 00000000
ExtFunc 4 : 00000000 00000000 00000000 00000000
ExtFunc 5 : 0408FF08 FF20FF10 40020140 40020140
ExtFunc 6 : 00000000 41004100 01008140 00000000
ExtFunc 7 : 00000000 00000000 00000000 00000001
ExtFunc 8 : 00002022 00000000 00000000 00000000
C0010015h : 00000000 0F001008 00000000 FB3D4D10
C0010016h : 00000000 00000000 00000000 FB3D4D10
C0010017h : 00000000 00000000 00000000 FB3D4D10
C0010018h : 00000000 D0000018 00000000 FB3D4D10
C0010019h : 0000000F F8000800 00000000 FB3D4D10
C001001Ah : 00000000 20000000 00000000 FB3D4D10
C001001Bh : 00000000 6003D22F 00000000 FB3D4D10
C0010111h : 00000000 000B0000 00000000 FB3D4D10
C0010112h : 00000000 00000000 00000000 FB3D4D10
C0010113h : 00000000 00000001 00000000 FB3D4D10

##--- Date 01/13/2003, Time 16:40:38

[SpiderMAN]

Now tell me guys, what voltage can i set up. Currently i'm running on 1,85V @ 1675 MHz 54C max full load under UD. i will try lower voltages and i tell you what is the results :)