PDA

View Full Version : Capt'n Slugs Mad Bomber LAN case



OneFastFord
01-09-2003, 09:47 PM
This is Capt'n Slugs mini-LAN case..
He built the computer and I cut the side panel...he wrote
"Booyah! After 5 months of anticipation and coordination with Charlie (64Thunderbolt) I've finished my LAN rig! I modded everything (Heatsink, Case, Lighting, Cables) except the drives. This low-budget Small Form Factor gaming machine measure a meager 15 x 12 x 4 inches and weighs in at only 8.5 pounds!
The guts are ..
"Duron 900
Asus A7N266-VM (will eventually be upgraded to an nForce2 mATX mobo)
256mb PC2100 DDR
IBM Travelstar 12GB UDMA66 Laptop Hard Drive (tiny and silent)
Samsung 24x Laptop CD-ROM
165w Enlight PSU
Enlight Slim case

I modified the heatsink to allow the usage of an EXTREMELY thin 80 x 80 x 10mm fan instead of the regular high-pitched 60mm fan. Using only low-speed or 80mm fans, I was able to drop the over-all system noise level to 21Dba. The Duron hasn't gone above body temperature yet. Even when I play UT2k3. This machine has been sitting next to my desk Folding 24/7 for the past 4 months.

Enough blabber, onto the pics! "
http://members.aol.com/liquidthundercr/madbomber1.jpghttp://members.aol.com/liquidthundercr/madbomber2.jpg
http://members.aol.com/liquidthundercr/madbomber4.jpg

N8
01-10-2003, 05:21 AM
Very sharp! :)

P0G0
01-13-2003, 10:30 PM
how much did the rig cost you parts wise? I LIKE it alot

OneFastFord
01-13-2003, 10:57 PM
check with Captain Slug at overclockers.com forum, he has lists and connections for all the small stuff..

Attitudx
01-14-2003, 08:29 AM
that case is tight I have a nuclear fall out shelter symbal on mine, but i havent cut it out yet, thought actually of using the symbol for spawn and using a green light to accent the eyes