PDA

View Full Version : The Official Opteron 939 Overclocking Thread



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [20] 21

cadaveca
03-06-2006, 08:43 PM
We would have to know exactly how that number works i think...it could be a spiral outwards from center, or left/right...maybe there is jumps in numbers for cpu's next to one another. With enough info, it should be easy to figure out. Would have made my handpicking easier! maybe many numbers are the same...close ot center, one side of center is better...I am sure they check this to calibrate lens.

Absolute_0
03-06-2006, 08:57 PM
i am not so sure lower is better anymore

here is my thread
http://www.xtremesystems.org/forums/showthread.php?t=88600

pics are dead but you can stillread my posts

cadaveca
03-06-2006, 09:10 PM
like i said, spiral pattern amy explain the difference. make a to-size pic of a wafer with numbers in spiral, and you see what i mean. I bet with enough numbers, we could even place the machine it was fabbed with.

ugp
03-06-2006, 09:16 PM
Just messing around with Windows XP 64-Bit Edition...

Here is a quick SuperPi run with my Opteron 146...

http://i5.photobucket.com/albums/y190/ugp/Computer/Windows%2064/SuperPiMod-Windows64-28.jpg

macg
03-07-2006, 04:27 AM
Opty 146 CABYE 0540 FPAW
Mushkin BH-5s

http://img393.imageshack.us/img393/3421/30primestabletightbh53ju.th.jpg (http://img393.imageshack.us/my.php?image=30primestabletightbh53ju.jpg)

http://img393.imageshack.us/img393/4403/sp20043ghz0ok.th.jpg (http://img393.imageshack.us/my.php?image=sp20043ghz0ok.jpg)

http://img393.imageshack.us/img393/42/3dmark05stockxtxspeedlod0cg.th.jpg (http://img393.imageshack.us/my.php?image=3dmark05stockxtxspeedlod0cg.jpg)

ugp
03-07-2006, 06:39 AM
19K is all you get in 3DMark03?

What are you scores in 01 and 05?

macg
03-07-2006, 06:51 AM
Yep, running the x1900xtx at stock at the moment.

seem to have lost my 01 screenie, gonna do a run in a bit :)

anyhow, heres 3dmark05:
http://img417.imageshack.us/img417/8386/3dmark05stockxtxspeed0az.th.jpg (http://img417.imageshack.us/my.php?image=3dmark05stockxtxspeed0az.jpg)

PL4YD34D
03-07-2006, 06:59 AM
did you log temps in ati tool mac and if so what did they get up to in 3d05. if you didnt could you poss run again with temp logging? pwiddy pweese

macg
03-07-2006, 07:15 AM
did you log temps in ati tool mac and if so what did they get up to in 3d05. if you didnt could you poss run again with temp logging? pwiddy pweese

@1.225vgpu and 2.086vmem, 20C ambient temp, my max temp running 3dmark05 was 68C. idle was ~40C

phelan1777
03-07-2006, 08:45 AM
well nothing to special to report here.

run @ 2.7, 2.8, and 2.9,

Can't finish 3Dmark 01-06 @ 2.9, but ram memtest for 11 hours.

scored 14K on 03 @2.8
scored 32K on 01 @2.8

need to work on stability @2.9, don't know if I can hit 3GHz.

Have yet to run pi, but ran F@H for 20hours @2.7, @100%CPU

PL4YD34D
03-07-2006, 10:17 AM
@1.225vgpu and 2.086vmem, 20C ambient temp, my max temp running 3dmark05 was 68C. idle was ~40C

on stock cooling thats pretty awesome. seems like the temps dont go up that much until the vgpu rises above 1.4. (from what ive seen)

a little off topic, so i wont ask anymore...

ugp
03-07-2006, 02:16 PM
Yep, running the x1900xtx at stock at the moment.

seem to have lost my 01 screenie, gonna do a run in a bit :)

anyhow, heres 3dmark05:
http://img417.imageshack.us/img417/8386/3dmark05stockxtxspeed0az.th.jpg (http://img417.imageshack.us/my.php?image=3dmark05stockxtxspeed0az.jpg)
That is about right...is that stock or 690/800 in ATI CCC?

All my benchies have been at max in ATI CCC...

macg
03-07-2006, 02:18 PM
on stock cooling thats pretty awesome. seems like the temps dont go up that much until the vgpu rises above 1.4. (from what ive seen)

a little off topic, so i wont ask anymore...


yep, i keep mine below 1.4v with the stock cooler, i hate having it sound like a jet engine lol.

3dmark 01 @ stock (forgot to open up ati tool :()
http://img77.imageshack.us/img77/5118/3dmark01stockxtx5ls.th.jpg (http://img77.imageshack.us/my.php?image=3dmark01stockxtx5ls.jpg)

and heres a 20K run of 3dmark '03, still at stock xtx speeds
http://img158.imageshack.us/img158/6427/3dmark03stockxtx7wg.th.jpg (http://img158.imageshack.us/my.php?image=3dmark03stockxtx7wg.jpg)

macg
03-07-2006, 02:20 PM
That is about right...is that stock or 690/800 in ATI CCC?

All my benchies have been at max in ATI CCC...

It's at stock, and im using ATI Tool, disabled ATI CCC :)

Bob21
03-08-2006, 03:00 PM
How is everyone doing with 06 chips?

ugp
03-08-2006, 03:20 PM
My 06 chip does 3.0 and the contact on the IHS is awesome!

CompGeek
03-08-2006, 08:01 PM
144 CAB2E 0546 UPMW = 2.8ghz prime stable @ 1.55v.

ken
03-08-2006, 09:22 PM
CACJE 0604 CPAW
batch #0103

http://img128.imageshack.us/img128/112/146290ui.th.jpg (http://img128.imageshack.us/my.php?image=146290ui.jpg)

1.472v stable too (down from 1.504 from SS above)

http://img54.imageshack.us/img54/171/14614723ny.th.jpg (http://img54.imageshack.us/my.php?image=14614723ny.jpg)

KViper19
03-09-2006, 12:09 PM
just ordered a 146 from monarch. hope i get a good stepping, gonna really test this thing out on my new water system that im setting up one my stuff comes in the nest couple days

ugp
03-10-2006, 06:59 AM
The new Opteron 146s have great IHS contact on the inside...I think AMD finally noticed that half of them were really crappy and fixed this issue...I have no issues running mine at v1.6 on air cooling 24/7

before
03-10-2006, 12:25 PM
I've some CPUs of this stepping to pretest; didn't test with less or more volts, but 3GHz@1.51V is pretty good actually :)

http://www.beforeoverclock.com/images/CACJE0603FPMWSUPERPI32M24M14S.jpg

Bob21
03-10-2006, 12:34 PM
I've some CPUs of this stepping to pretest; didn't test with less or more volts, but 3GHz@1.51V is pretty good actually :)


I just got one of these back from AMD on RMA seems to be about average the 146 it replaced did 3.1GHz no prob :(

Absolute_0
03-10-2006, 12:39 PM
3.1 Ghz is way above average for a 146

Bob21
03-10-2006, 12:40 PM
Ya, my old one CAB2E 0540FPMW did 3.1GHz on air, the one AMD sent me is a CACJE 0603FPMW, but it's about average.

before
03-10-2006, 12:41 PM
I just got one of these back from AMD on RMA seems to be about average the 146 it replaced did 3.1GHz no prob :(What's your highest stable clock with it?


3.1 Ghz is way above average for a 146

sure :D

Bob21
03-10-2006, 12:46 PM
I havn't really messed with it, I have an FX-57 for overclocking, but its running now at 2.8GHz with stock volts.

I have played with one other CACJE it was a 0545APAW i think. did 2.92GHz with stock volts, suicide at 3.2GHz, but I didnt like how it acted. If it was unstable in Super Pi it would just lock up instead of throwing an error. And cold bug kicked in at 10C really bad

Bob21
03-10-2006, 12:49 PM
The new Opteron 146s have great IHS contact on the inside...I think AMD finally noticed that half of them were really crappy and fixed this issue...I have no issues running mine at v1.6 on air cooling 24/7


I completely agree with this, I don't know what they did, but my 06 chip idles at 31C compared to about 45C for my 0540

dinos22
03-10-2006, 12:54 PM
I completely agree with this, I don't know what they did, but my 06 chip idles at 31C compared to about 45C for my 0540
yeap my 0540 is IHS-less and the temps are awesome...........i never saw it go past 44C even with 1.65v and past 3.1GHz on air

Bob21
03-10-2006, 01:55 PM
Yep I popped the lid on my 0540 too and temps wend down by seriously 20C!!

But it died and I put the IHS back on and RMA'd it ;)

ugp
03-10-2006, 03:57 PM
Yep I popped the lid on my 0540 too and temps wend down by seriously 20C!!

But it died and I put the IHS back on and RMA'd it ;)
That is evil lol...so evil...did the RMA work?

Bob21
03-10-2006, 04:01 PM
Yes, and I do not feel guilty because the IHS being removed had nothing to do with the chips death.

macg
03-10-2006, 04:09 PM
running my cabne IHS less to.. dropped 6C on load ;)

on a side note, ugp, we almost have the same specs lol :) only our.. PSU's differ

ugp
03-10-2006, 04:16 PM
running my cabne IHS less to.. dropped 6C on load ;)

on a side note, ugp, we almost have the same specs lol :) only our.. PSU's differ
Yeah I see that...also you are running a RAID 0 with Raptors...hopefully this deal with trading my Opteron 150 and some cash for two 36GB Raptors goes through and I can have my RAID system.

Bob21
03-10-2006, 04:21 PM
Its suprising how much faster some 10K rpm SATA drives can make your system feel :toast:

ugp
03-10-2006, 04:23 PM
Oh I know man...I know with this one 74GB Raptor...it loads XP up 4 times as fast as the SATA2 drives I have used in the past...

With this one drive I get 57MB/s transfer rate...

I want to play with a RAID system now...I have never setup a RAID before...

Bob21
03-10-2006, 04:27 PM
Ya, you should be up to about 95MB/s maybe more with the 36gigers in raid0. pretty snappy in windows.

I ended up polishing my drives too, looks pretty sweet.

douthers
03-10-2006, 10:33 PM
Ok, after 3 weeks tweaking, here's my Opty 146 and 2Gb Gskill PC4000 HZ's....

Interestingly, couldn't do this at 290x10.. failed Prime in minutes. 323x9 - no prob.... Go figure

Prime stable. Not had time to run Memtest.

http://i50.photobucket.com/albums/f338/douthers/opterongskillcpuz.jpg





I'm sure I can get more... just need time (and help!) to achieve it... :)

4Qman
03-10-2006, 11:33 PM
This Chip had the worst contact with the IHS, once removed it drop 15oC under Load, it couldnt do 3Ghz before.:D

http://img62.imageshack.us/img62/825/opteron3ghzhzat273mhz0bz.jpg

shimmishim
03-11-2006, 12:53 PM
CAB2E 0604EPAW
Batch #245ish

2.9 ghz @ stock voltage

http://www.johnshim.com/forums/xtremesystems/2900smallfft0604epaw2hours.jpg

Spyrus
03-11-2006, 03:49 PM
Can someone explain the 'batch' thing?

CompGeek
03-11-2006, 03:52 PM
Batch really doesn't matter, its just the exact batch the CPU came from, kinda like a batch of rolls on a pan in the oven, or cookies.

Spyrus
03-11-2006, 04:37 PM
And how can i recognize it on my chip?

Another question:
I bought an opti 146 CACJE 0601GPAW.
It is going up to 2.75 with default vcore but it is getting very hot. 60+ degrees.
Stock air of course for that.By removing IHS & stock cooling will i have better results with this voltage? What temperature shall i expect?
San Diego cores are cooler than Optis (and Venice is cooler than Opti two at the same MHz...)?

Phase
03-11-2006, 05:10 PM
EDIT: 3-13-06 Re-Ran 3DMark 05 Provided Link - also re-ran 01 link provided

| Opty 148 Cabne 0528 GPMW batch#0253 cooled w\ Mach I "PC Ice Modified" IHS Still Intact|
| DFI Ultra D >6-23 bios|
| Mushkin Redline XP4000 (2x512)|
| Sapphire X1900XTX w\DD waterblock|
| 2x Hitachi 80gb Sata II Raid 0 |
| OCZ 520w Power Stream |


Prime 8hrs @3412mghz>Taken with Digi-Cam:
http://i17.photobucket.com/albums/b84/Dreadstar7/Mach%20I%20Lian-Li%20Pics/Prime8hr.jpg


Super Pi 32m @3565mhz; Ram@254mhz 2-2-2-5 1T :
http://i17.photobucket.com/albums/b84/Dreadstar7/3565mhzSuperPi32m5.jpg


Super Pi 1m @3619mhz: Ram@241mhz 2-2-2-5 1T (This run was not optimized) :
http://i17.photobucket.com/albums/b84/Dreadstar7/Mach%20I%20Lian-Li%20Pics/3619mhzPi1m.jpg


3DMark01@3651mhz! :slobber: ; Ram@260mhz 2-2-2-5 1T; VC @ 774c_873m :
http://i17.photobucket.com/albums/b84/Dreadstar7/X1900XTX/3651mghz3DMark01_45516VC774c_873m3b.jpg



3DMark 05 @3651mghz; Ram @260mhz 2-2-2-5 1T : VC @ 774c_873m :
http://i17.photobucket.com/albums/b84/Dreadstar7/X1900XTX/3651mghz3DMark05VC774c_873mb3.jpg


SS Shot @ 3740mhz :
http://i17.photobucket.com/albums/b84/Dreadstar7/3740CPUzVerified.jpg



3DMark 01 45,516 > http://service.futuremark.com/compare?2k1=8924615

3DMark 05 14,522 > http://service.futuremark.com/compare?3dm05=1875812

Phase

coop
03-11-2006, 11:04 PM
Hey Phase, welcome. Nice set of screens.

Family man 72
03-12-2006, 12:40 AM
146 Opteron CABYE 0540FPBW 9x330 vcore 1.4 + 104% (bios)
Memory OCZ 2GB PC-4000 Platinum EB @ 270MHz 3-3-2-7
DFI SLI-DR bios 623-3
Watercooled
Primestable: yes
3D-stable: yes

Viss
03-12-2006, 04:49 AM
Phase those are very nice clocks on the opteron :toast: Your scores should be higher though as you mentioned. Try lod +3.0 for nature in 2001 get those superpi times were they belong. One of the highest clocks ive seen though !!

Spyrus
03-12-2006, 10:28 AM
Family man 72 can you do that clocks with 10 multi?

Phase
03-12-2006, 09:48 PM
@coop

Hey Phase, welcome. Nice set of screens.

Thanks for the welcome. That is an excellent Super Pi 32m run by the way.


@loc.o

Phase those are very nice clocks on the opteron Your scores should be higher though as you mentioned. Try lod +3.0 for nature in 2001 get those superpi times were they belong. One of the highest clocks ive seen though !!

Thanks! Yea this 148 is another Cabne monster, benching 3D @3651mhz is higher than I first thought it would go. The Super Pi 1m was just a test to see how high it would run it at. 3DMark 01 is another story... I will try the LOD after a fresh install, this install is already showing signs of slowing down. I also would like to re-run Super Pi... I know there is more left in this Opty...


NOTE: Posted new 3DMark 05 SS and provided ORB link. *Post # 4840 above*

Edit: 3-13-06
@loc.o
Thank you for the suggestion. :toast:

Check out the new 01 score in my post above.

Family man 72
03-13-2006, 05:33 AM
Family man 72 can you do that clocks with 10 multi?
I have not tested yet 1:1 with 10 multi. I will try later :)

But I know that EB:s are stable at least till 273 MHz. Even 3D-stable.

[XC] 4X4N
03-13-2006, 08:41 PM
I haven't seen many 06 144's, so I thought I post some quick results with the one I received today. Just getting started with this: CACJE 0602 GPMW. At stock vcore, 9x295, over 1hr prime stable. Had bump vcore to 1.425, 9x312, still running prime, currently at about 1 1/2 hours. That's 2.8ghz at just over stock voltage. Not bad for $150 :D I'm sure there's still more in it. I remember when that would be an amazing overclock for a 3000. These opty's have really raised the bar. Just about done for tonight, will try and get some screenshots up tomorrow.

EDIT: Still trying to find the max of this chip. Here is 1 hour of prime at 2.9ghz. Memory is on 100 divider just to rule it out. Going to stop it now and crank 'er up some more.
http://img393.imageshack.us/img393/5493/9x3229vo.th.jpg (http://img393.imageshack.us/my.php?image=9x3229vo.jpg)

UPDATE: 3.0ghz 32m @ 1.475v :D Failed prime after 15 min. Raised vcore to 1.525, LTD to 1.3, CHIPSET to 1.6. Currently priming--passed 26min so far, this might be stable. 1.2ghz overclock with air cooling :woot:
http://img128.imageshack.us/img128/9000/9x3345wg.th.jpg (http://img128.imageshack.us/my.php?image=9x3345wg.jpg)

sponge bob
03-14-2006, 01:07 AM
PHASE , nice, what loaded temps? and how you control the temperatur?

before
03-14-2006, 12:55 PM
CACJE 0603FPMW :cool:

http://www.beforeoverclock.com/images/CACJE0603FPMW%23351SPI32M22M41S.jpg

sponge bob
03-15-2006, 05:16 AM
is cab2e 0546gpaw coldbuged 50392? 146 opty, anybody know?

funkflix
03-15-2006, 05:18 AM
is cab2e 0546gpaw coldbuged 50392? 146 opty, anybody know?

My one coldbugged at +14°C and 10x325...

sponge bob
03-15-2006, 06:44 AM
My one coldbugged at +14°C and 10x325...
omfg, thats really suckage... mine cpu inst very good, 1,55b from bios and it can run 3 ghz 3d, but even 2,9 ghz prime failis:fact:

before
03-15-2006, 08:18 AM
is cab2e 0546gpaw coldbuged 50392? 146 opty, anybody know?

Check this http://www.beforeoverclock.com/b/showthread.php?t=28

sponge bob
03-15-2006, 08:40 AM
Check this http://www.beforeoverclock.com/b/showthread.php?t=28well then i cant AGEN run my cpu under dice... damn sold my 3000+ what was able to to 3,3 ghz with only 1,75v (IHS on):slapass: my friends 170 was buged like 5+ *C :fact: and and hes 148 was buged @ -15, hardcore suckage by amd :nono:

pancake
03-16-2006, 09:22 AM
Anyone else experienced a drop in needed volts to make your chip stable over time?
When i first got my opteron 146 it needed 1.6v to be stable @ 3g or 3.1g, now a couple of months on its stable with only 1.52v @ 3g its saved me about 3c in load temps aswell on my watercooling.

What htt is everyone running? my old winchester never liked anything over 1000 so i always ran 3 x htt, but this opty runs fine at 4 x 300

ugp
03-16-2006, 01:40 PM
I was always told keep the HTT under 1000 anyway...

I will have to test my voltage neededon my Opty 146...right now I am using v1.62

sponge bob
03-17-2006, 01:15 AM
I was always told keep the HTT under 1000 anyway...

I will have to test my voltage neededon my Opty 146...right now I am using v1.62
yeah that HTT stuff make sense, i needed to use 2,5x with my 144 to get it 3200 mhz with dice :P bug was -5*C it was realy pain in the ass to bench with it :nono:

higgins
03-20-2006, 05:53 AM
Anyone knows if the new Opteron 146's are good clockers? I have to make a choice between a 146 and a new 3700+, which are known to o/c pretty good.

jhatfie
03-20-2006, 02:06 PM
Just got my new Opteron 146 from Monarch today. Was too excited to grab the stepping off the spreader before installing it. This one seems to run a bunch hotter than the Venice it is replacing. My 3000+ at 2.7ghz @ 1.55v would idle at 21-22C and load at 30C under water. My Opteron idles at 28C and loads around 38C at 2.95ghz @ 1.45v with the same watercooling (Storm, D4 pump, D-tek pro-core, etc). Will try for more later as soon as I have time to test more.

Not sure if the heatspreader is just not making real good contact with the core or not. Still, sub 40C under load is acceptable I suppose.

*UPDATE* ~ Up to 3100mhz so far @ 1.5v. Not 100% stable just yet, but working on it (stable enough for 1M superPi at least). Sadly I had to use a crap 140mhz memory divider. I thought my DFI had a 150mhz divider option...maybe a different bios or am I just thinking things? Temps are bugging me though...thought they would be lower under water.

coop
03-20-2006, 06:59 PM
@higgins, if you want to o/c and are using air, temps should be considered. It seems many newer 3700's do well and run cooler than 146..generally. Plus you get an 11x.

bedhead9876
03-20-2006, 07:44 PM
i got a opty 144 cab2e and i was wondering how high i can push it on water i idle right now at 2.8ghz at 15'c so will i be able to hit like 3.2-3.4 please cause i hope so

neoman
03-21-2006, 06:31 AM
Can anyone tell how bad overclockers Opteron 144, 146 can be . Could they do 2.8ghz all ?

Shark-357
03-21-2006, 09:04 AM
Most of 146 do 2800-2900mhz stable but a lot of them 3000mhz and over .
Awerage 144 does 2700mhz..

higgins
03-21-2006, 09:28 AM
@higgins, if you want to o/c and are using air, temps should be considered. It seems many newer 3700's do well and run cooler than 146..generally. Plus you get an 11x.

Yeah, seems the 3700+ is a better choice when going air. Thanks mate. :)

ugp
03-22-2006, 03:43 AM
Testing stock voltage clocks with G.Skill 2GBHZ...

Opteron 146 [CAB2E 0604EPAW] & Big Typhoon @ 270x10.0 @ v1.4 (Reads v1.36)
G.Skill 2GBHZ @ 270FSB @ 3-4-4-8 @ v2.5

Prime Stable for 8+ Hours... Load temps are only 38C Max...

http://i5.photobucket.com/albums/y190/ugp/Computer/Opteron%20146/Prime-2.jpg

EDIT:

I will get a A64Tweaker screen up as soon as I get home...I left my rig Priming at 280 1:1 still at Stock voltage....

Afterwards I plan on trying lower timings...I have seen some people using 3-4-3-5 on G.Skill at 280+...

sierra_bound
03-22-2006, 08:33 AM
Opteron 148 (CABYE 0528GPMW)
Stock Vapochill LS

http://img75.imageshack.us/img75/8440/319x1132m1lp.jpg

ugp
03-22-2006, 06:27 PM
Alittle more to update...

I tried 280x10.0 1:1 and ran Prime for about 2 hours and failed...I need to tweak the RAM alittle more but I think I can push atleast 285 out of this G.Skill...

Here is 275x10.0 v1.36
G.Skill @ 275FSB 3-4-4-8 @ v2.5

http://i5.photobucket.com/albums/y190/ugp/Computer/Opteron%20146/Prime-2750-GSkill.jpg

gundamit
03-22-2006, 11:49 PM
Opteron 148 (CABYE 0528GPMW)
Stock Vapochill LS IHS off?

Nubius
03-23-2006, 01:22 AM
holy crap these things heat up quick.

Mine is running 301x9 for 2.709GHz. Vcore is 1.35 + 113% I believe and CPU-Z is reading 1.472 although I realize CPU-Z isn't the end all answer in accuracy.

This sucker was 43C at 2.6GHz but that was at 1.4v, now it's hitting 50C and the PWM IC's are hitting 49-50C! Whew......although I did see someone talking about theirs hitting 68C lol.

Guess I need to get my little 60mm 6000RPM fan aiming at those PWM's and the CPU....only drawback is those fans are freakin noisy as all hell. I DID just get the opty today though, so the AS5 hasn't come even close to settling in yet, so hopefully the temp drops a little in the next few days.

And this is even with water cooling =/

I really thing my temp sensor is off though. It bounces around too much. As soon as I stop prime it drops to 38C instantly and I've only ever seen my GPU drop in temp that quick, but beyond that it'll go like 36 , 40 , 37, 36, 41, like that within seconds of each other.

ugp
03-23-2006, 05:37 AM
holy crap these things heat up quick.

Mine is running 301x9 for 2.709GHz. Vcore is 1.35 + 113% I believe and CPU-Z is reading 1.472 although I realize CPU-Z isn't the end all answer in accuracy.

This sucker was 43C at 2.6GHz but that was at 1.4v, now it's hitting 50C and the PWM IC's are hitting 49-50C! Whew......although I did see someone talking about theirs hitting 68C lol.

Guess I need to get my little 60mm 6000RPM fan aiming at those PWM's and the CPU....only drawback is those fans are freakin noisy as all hell. I DID just get the opty today though, so the AS5 hasn't come even close to settling in yet, so hopefully the temp drops a little in the next few days.

And this is even with water cooling =/

I really thing my temp sensor is off though. It bounces around too much. As soon as I stop prime it drops to 38C instantly and I've only ever seen my GPU drop in temp that quick, but beyond that it'll go like 36 , 40 , 37, 36, 41, like that within seconds of each other.
The PWM can handle 50+ Temps easy...if you are concerned about the temps just place a fan over that area...a simple 30CFM fan will drop the temps a few degrees...

What were your temps at stock speeds and stock voltage?

sierra_bound
03-23-2006, 11:48 AM
IHS off?
No. Still on. :)

jhatfie
03-23-2006, 02:40 PM
Opteron 146 at 3100mhz (310x10) @ 1.55v with 166mhz memory divider and 2x1GB Gskill ZX (3-3-2-6). CABZE 0604EPAW. Still working on it.

http://home.comcast.net/~jhatfie/opteron146_3100.jpg

Lane-k
03-24-2006, 11:34 PM
I have a little prob, at a certain OC pehraps someone can give me some idea:

It's concern stability during SP2004, i have launch a SP 2004 Blend Test at 3144mhz, 262x12, 2.5-4-4-10 ( large timings for test normally i use 2.5-3-3-7 at 260mhz)
DFI expert last beta bios. (12/07)
TCCD600 OCZ Elite

The test pass without warning and errors i have take a screen at 1H20minutes, complete timings with the A64Tweakers,
http://img153.imageshack.us/img153/3007/114ty.jpg (http://imageshack.us)

No problem so far..
...But if i launch the SP2004 Large FTT test (DRam stress), the PC lock up, and i need reboot manually... for the blend test i have put alot of Vcore, but it pass with lower voltage.. I have the feel this is more a PSU prob but i don't understand.. i can imagine the Large FTT test give error after 30-40 minutes if the blend test pass but not lock up directly after 2 sec..

I command a Enermax liberty 620W for replace the TT 680W monday with G-skill Utt Bh5 3200 for play with them but i m not sure the prob is only that..
Some advice?

4Qman
03-27-2006, 07:00 AM
Anyone else experienced a drop in needed volts to make your chip stable over time?
When i first got my opteron 146 it needed 1.6v to be stable @ 3g or 3.1g, now a couple of months on its stable with only 1.52v @ 3g its saved me about 3c in load temps aswell on my watercooling.

What htt is everyone running? my old winchester never liked anything over 1000 so i always ran 3 x htt, but this opty runs fine at 4 x 300

I also have had the same drop in voltage required. need 1.62v to Prime at 3Ghz stable. I run it at that for around 3mths, once i removed the IHS its now SOLID in primt at 1.52v :D

Also lads are the CABYE 0540 FPAW Cold BUGGED?

OnLine
03-27-2006, 09:01 PM
Nothing special but here it is - Opty 148 with IHS removed & on water;
http://img148.imageshack.us/img148/328/prime27kt.jpg


How about a rendertest at 3.2GHz?
http://img489.imageshack.us/img489/5158/rendertest800x600320ghz4ks.jpg

:)

skaktuss
03-27-2006, 09:32 PM
28C @ burn???:eek:

OnLine
03-27-2006, 10:30 PM
28C @ burn???:eek:

:woot:

Actually no!

DFI Expert mobo reports too low CPU temp, I'd say add 8-10 'C to those 28'C.
That's closer to the truth.

Btw, removing the IHS reduced load temp by 4-5 'C.
And it's water ...

( It's a cacje but the exact stepping I've forgot )

:)

C-BuZz
03-28-2006, 12:45 PM
Opty 146 CAYBE, 3.2Ghz @ Default volts. Benchable @ 3.5Ghz. Best chip i've ever owned :)

C-Buzz

neoman
03-28-2006, 06:39 PM
Thats amazing CPU you got :O

[ITA]SEREUPIN80
03-28-2006, 06:42 PM
Hello guys, what do you think about this cpu ?

AMD Opteron 148 - OSA148DAA5BN - CABCE 0520MPMW

CompGeek
03-28-2006, 07:59 PM
Opty 146 CAYBE, 3.2Ghz @ Default volts. Benchable @ 3.5Ghz. Best chip i've ever owned :)

C-Buzz
you lucky man

C-BuZz
03-28-2006, 08:00 PM
Thats amazing CPU you got :O

ta :)

I actually clockgened it all the way to 3.28GHz while priming before straight BSOD. So i'd say around 3.23/3.25 24/7 on default volts :)

C-BuZz

dinos22
03-28-2006, 08:06 PM
nice one for sure

i forgot to ask you have you dropped the multi and tested where the HTT cold bug limit is :)

C-BuZz
03-28-2006, 08:16 PM
nice one for sure

i forgot to ask you have you dropped the multi and tested where the HTT cold bug limit is :)

Heya dude :)

Havent tried that yet, I'll give it a crack later on tonight after I finish up regassing me SS.

C-BuZz

Proendo
03-29-2006, 12:17 PM
Hello,

I just got my new CPU and want to start overclocking.

some specs...

Asus a8v deluxe
2gb corsair TWINX2048-3200 3-3-3-8
Antec 480W True Power
Thermaltake Tsunami Dream Case

some stock non overlclocked settings

2:1 DDR 400
bank interleaving AUTO
Burst Length 4 beats
CAS 3
TRAS 8
TRP 3
TRCD 3
TRRD 2T
TRC 11T
TRFC 14T
TRWT AUTO
TWCL AUTO
TWR 3
aysnclat AUTO
read preamble setting 5.5ns
2t command DISABLE

CPU FSB 200mhz
CPU mult 10x
CPU voltage 1.350v
agp/PCI 66.66/33.33
vdimm 2.8v

Seems that the ram and cpu combo are a little sensitive. Any suggestions on how to relax the RAM timming so I can get a decent overclock and still get past system post.

before
03-29-2006, 12:30 PM
Nice chip under water :)

http://www.beforeoverclock.com/images/CACJE0603FPMW%23429Temp.jpg
http://www.beforeoverclock.com/images/CACJE0603FPMW%23429Vcore.jpg
http://www.beforeoverclock.com/images/CACJE0603FPMW%23429Temp@3103.jpg
http://www.beforeoverclock.com/images/CACJE0603FPMW%23429Vcore@3103.jpg
http://www.beforeoverclock.com/images/CACJE0603FPMW%23429SP2004.jpg
http://www.beforeoverclock.com/images/CACJE0603FPMW%23429SCPU@3103.jpg

C-BuZz
03-29-2006, 01:42 PM
nice one for sure

i forgot to ask you have you dropped the multi and tested where the HTT cold bug limit is :)

refuses to boot @ 355HTT lol..

C-BuZz

dinos22
03-29-2006, 01:45 PM
refuses to boot @ 355HTT lol..

C-BuZz
it could be something else

i found that with my HTT cold bug Windows XP 32-bit will freeze during loading and 64-bit windows after a few seconds in windows.......soooo i guess it could be some other timings....just play with MAL/RP more and TRFC and some other values.....:)

you sure that motherboard can do more than 355MHz......i checked mine on air before phase to be 100% sure and it did 32M superpi at 400Mhz easily....and could go up to 420Mhz before it starts playing up

dogsx2
03-29-2006, 01:49 PM
It just dawned on me that you do not have the going to Germany picture up. What happened?

C-BuZz
03-29-2006, 01:56 PM
it could be something else

i found that with my HTT cold bug Windows XP 32-bit will freeze during loading and 64-bit windows after a few seconds in windows.......soooo i guess it could be some other timings....just play with MAL/RP more and TRFC and some other values.....:)

you sure that motherboard can do more than 355MHz......i checked mine on air before phase to be 100% sure and it did 32M superpi at 400Mhz easily....and could go up to 420Mhz before it starts playing up

when I say refuses to boot I mean refuses to boot into Windows, just freezez @ 355HTT loading windows. Not really worried about it to much, as I can still bench @ 10x351 :)

C-BuZz

Proendo
03-30-2006, 05:47 AM
Hello,

I just got my new CPU and want to start overclocking.

some specs...

Asus a8v deluxe
2gb corsair TWINX2048-3200 3-3-3-8
Antec 480W True Power
Thermaltake Tsunami Dream Case

some stock non overlclocked settings

2:1 DDR 400
bank interleaving AUTO
Burst Length 4 beats
CAS 3
TRAS 8
TRP 3
TRCD 3
TRRD 2T
TRC 11T
TRFC 14T
TRWT AUTO
TWCL AUTO
TWR 3
aysnclat AUTO
read preamble setting 5.5ns
2t command DISABLE

CPU FSB 200mhz
CPU mult 10x
CPU voltage 1.350v
agp/PCI 66.66/33.33
vdimm 2.8v

Seems that the ram and cpu combo are a little sensitive. Any suggestions on how to relax the RAM timming so I can get a decent overclock and still get past system post.

before
03-31-2006, 09:11 AM
:D 3GHz@1.39V under water

http://www.beforeoverclock.com/images/CACJE0603FPMW%23139Temp.jpg
http://www.beforeoverclock.com/images/CACJE0603FPMW%23139Vcore.jpg

neoman
03-31-2006, 10:24 AM
Well done before :)

before
03-31-2006, 11:03 AM
Thx mate! :toast:

shimmishim
03-31-2006, 01:38 PM
CACJE 0602GPMW w/o IHS

I was able to prime 9x334 or 3ghz @ 1.45 with 45C's load.

Wasn't able to do 9x345 or 3.1 ghz @ 1.5 or 1.55. Load temps got too high.

I remember reading CACJE was sensitive to temps so I decide to remove the IHS and now I get these results!

http://www.johnshim.com/forums/xtremesystems/9x345primetesting.jpg

testing prime right now! :)

specs in sig

ugp
03-31-2006, 03:41 PM
Geez...my 146 primes at 300x10 with v1.62 volts and only hits 40C under load...

dogsx2
03-31-2006, 06:50 PM
Put the 144 back in and took out the dc. This is the same cpu as in post #1 of this thread. It is still one of the better 144's that were made or are still being made.

http://img349.imageshack.us/img349/8908/01144420759zq.th.jpg (http://img349.imageshack.us/my.php?image=01144420759zq.jpg)

This cpu has given me more pleasure then any other I've owned.

ugp
04-01-2006, 05:35 AM
Nice overclock...

What is the RMA Replacement document on your desktop? LoL...Something break?

dogsx2
04-01-2006, 06:13 AM
Nice overclock...

What is the RMA Replacement document on your desktop? LoL...Something break?

Gskill ram that I sold to chew and someone took.:( Guess I need to take that off the desktop.:rolleyes:

coop
04-02-2006, 09:08 PM
Did this today. http://img85.imageshack.us/img85/4192/pm5hs8kc.th.jpg (http://img85.imageshack.us/my.php?image=pm5hs8kc.jpg)

Garrett
04-02-2006, 09:54 PM
17c... lol that's awfully cold, chilled water?
or bugged temp reading?

coop
04-03-2006, 04:35 PM
Chilled.

TVFREAKAZOID
04-03-2006, 08:40 PM
Did this today. http://img85.imageshack.us/img85/4192/pm5hs8kc.th.jpg (http://img85.imageshack.us/my.php?image=pm5hs8kc.jpg)
How do you get smartgaurdien? what kind of program is that?

Garrett
04-04-2006, 12:23 AM
How do you get smartgaurdien? what kind of program is that?
It's on the DFI cd...
If you lost it I can send it to you if you wish :)

fullup3
04-04-2006, 06:12 AM
yea, its on your cd that came with the mobo, or you can download it at dfi's websight.

Zeus
04-04-2006, 10:14 AM
While i had my system apart to change my ancient RBX for a Swiftech Storm block i could'n resist the temptation and popped the spreader. :)

Temp dropped a healty 5C under load, cpu can now do things it couldn't do before:

neoman
04-04-2006, 07:13 PM
Im getting a opty 146 tomorrow wich will run 2800mhz @ 1.38v :) i will test that and try to Prime @ 3ghz

TVFREAKAZOID
04-04-2006, 11:25 PM
It's on the DFI cd...
If you lost it I can send it to you if you wish :)
Oh really??? Well I put in the cd but for some reason it won't open. If you could send it to me that would be great.

I have another question. I realized that amd has a damn patch. I didnt' know about this. It also has to do with registry keys as well and I'm not that technical with comps. I'm a newbie. I did download the amd patch and microsofts hot fix as well. I guess someone else did a zip file of the registry key so that way it would save us the trouble. But I was told that I would have to do something with the boot.ll or something like that. So what do I need to do first? Install the amd patch, then the hot fix, and the regisrty key? What order do I need to do it in?:confused:

coop
04-05-2006, 11:03 AM
Finally had to go to bed. New bios is nice! 3hrs@3100 with 1.408v
http://img464.imageshack.us/img464/5580/newpm3hr6yd.th.jpg (http://img464.imageshack.us/my.php?image=newpm3hr6yd.jpg)
Over 3hrs@3200 with 1.52v
http://img464.imageshack.us/img464/1443/25hr32mpm9ef.th.jpg (http://img464.imageshack.us/my.php?image=25hr32mpm9ef.jpg)
http://img464.imageshack.us/img464/3324/314hr32mpm7kt.th.jpg (http://img464.imageshack.us/my.php?image=314hr32mpm7kt.jpg)

Zeus
04-05-2006, 12:46 PM
This Opty sure got some bawlls since i removed the HS:

http://img.photobucket.com/albums/v620/Z3us/2hprime3170-2.jpg

New Storm block must help as well, gained 120MHz for Prime 95. :)

Garrett
04-05-2006, 01:30 PM
This Opty sure got some bawlls since i removed the HS:

http://img.photobucket.com/albums/v620/Z3us/2hprime3170-2.jpg

New Storm block must help as well, gained 120MHz for Prime 95. :)Go pifast @ 3300... you can do it

Zeus
04-06-2006, 12:26 AM
Awaiting my new RAM from RMA.
Kakaroto had trouble with his testrig for testing my new pair. :(

Once here, interesting shots will be taken. ;)

neoman
04-06-2006, 09:41 AM
Zeus after removing IHS ur using Shim also ?

Zeus
04-06-2006, 09:53 AM
No, no shim.
The Storm waterblock has a very good mount without it.

neoman
04-06-2006, 10:03 AM
Atm i have IHS removed but im afraid of put it on naked . I have TT SE watercooling . I dont know how well does that CPU block suits with my CPU .

turbox997
04-06-2006, 08:22 PM
Finally had to go to bed. New bios is nice! 3hrs@3100 with 1.408v
http://img464.imageshack.us/img464/5580/newpm3hr6yd.th.jpg (http://img464.imageshack.us/my.php?image=newpm3hr6yd.jpg)
Over 3hrs@3200 with 1.52v
http://img464.imageshack.us/img464/1443/25hr32mpm9ef.th.jpg (http://img464.imageshack.us/my.php?image=25hr32mpm9ef.jpg)
http://img464.imageshack.us/img464/3324/314hr32mpm7kt.th.jpg (http://img464.imageshack.us/my.php?image=314hr32mpm7kt.jpg)


Can you give more info on this "new bios" ? I haven't heard of it, is it on the DFI website? I'm currently using 704-2bta, its nice and stable I guess, but none of the ram dividers can suit me on a x10 multiplier. If I use 623, then its not stable for some reason...=/

I flashed my bios 4 times in 24 hours...is that bad?

neoman
04-07-2006, 03:04 AM
Im confused now. I removed IHS and it helped with temps but i didnt gain anything with overclocking.
I got that chip from my friend who was running it @ 2800mhz with 1.39v prime stable on Dfi lanparty .
I cant even run 2800 prime stable @ 1.55v ........i have Epox 9NPA+SLI

Opteron 146 CAB2E 0546GPAW

And what means HT Width in bios ? its 16 up and 16 down. What does this give.

TVFREAKAZOID
04-07-2006, 12:53 PM
Can you give more info on this "new bios" ? I haven't heard of it, is it on the DFI website? I'm currently using 704-2bta, its nice and stable I guess, but none of the ram dividers can suit me on a x10 multiplier. If I use 623, then its not stable for some reason...=/

I flashed my bios 4 times in 24 hours...is that bad?

Ok, now what is the difference between the DFI.com driver date code 11/14/2005 and the DFI-Street.com driver 704-2bta???? I have the DFI.com driver date code 11/14/2005.

zpimp
04-07-2006, 03:01 PM
hello there, this is my first post
i want a computer to play (nfs:mw, quake4, bf2 ...)
i thought about this:
opteron 144 (cause its got 1mb L2)
7600gt(not yet in romania, i am from romania)
2x512 geil ddr400
i saw u guys do some really nice oc-ing on the opty over here ...and
i have some questions:
1). [in games] is it worth the difference between athlon64 512k and opteron 1mb cache?
2). how much can 144 go with stock cooler ?
3). is it worthed getting hyper 6+ or thermalright+vantec tornado,scythe or what would you reccomend?
i dont have any experience with oc-ing, but i like to believe im a fast learner :D
please help
zpimp,romania

Jacksn
04-07-2006, 03:12 PM
I've been fortunate enough to get my CABYE Opty148 upto 2.82Ghz (11x255) @ 1.375v and a maximum of 3.03Ghz (11x274) @ 1.45v
I have not gone to the max of 1.55v yet though. Until I have something better then the stock fan, it will have to wait.
The best PC upgrade in many a year....

coop
04-07-2006, 05:18 PM
@turbox997, you can find it here. http://www.xtremesystems.org/forums/showpost.php?p=1371451&postcount=1 It has some updates and convenience features. I found I could run Prime for a longer time. I like it. I had to 'reset cmos' with this though. Never had to do that before. I used 623 for quite some time, then 11/14 for a couple weeks prior to this one. This one is very nice, and no, as long as you do it correctly.
@neoman, you have to keep it cool. 1.55v makes more heat than 1.39v. Yes, if you are on the line, a couple degrees will make a difference. Also maybe you will still need to configure your board slightly.
@TVFREAKAZOID, 11/14 is a dfi bios. The 704 is a modded one. Many people like it. I did not.
@zpimp, 1) yes 2) some 3)yes. Read what some others use for air cooling. It has come far and works very well.
@Jacksn, nice job. Do some research. It seems you have a good cpu. Get a good fan and get the most from it.

turbox997
04-07-2006, 06:29 PM
@coop, you the man! haha, answering all the questions in one beast post! Thanks for the info, too bad I don't have a floppy disk drive on any of my computers! I guess I'll have to wait for Tmod or someone to press a CD.

neoman
04-07-2006, 07:41 PM
Coop: Temps arent the problem, it idles 27 and full load is 35-36 with 1.57v

coop
04-07-2006, 08:31 PM
@turbox997, they are only about $10.00!
@neoman, that is a good temp, but for example when I did the 3.1ghz one above, I had to keep it below 20-21c. What type cooling did your friend have and at what temps when he was doing 2.8? Have you ruled out memory or other setting?

[XC] 4X4N
04-08-2006, 10:49 AM
144 Opty CACJE O6O2 GPMW This is a great chip capable of 3ghz stable. I have been having real problems getting any divider besides 100 stable. Well, with the new 3/29 bios I think I've got it. :woot: Here's 9x334 32m with 150 divider putting memory at 250. Now I just have to work at getting the mal and rp lower.

http://img136.imageshack.us/img136/1681/32m9x3344hu.th.jpg (http://img136.imageshack.us/my.php?image=32m9x3344hu.jpg)

lopri
04-08-2006, 01:26 PM
Sorry I posted this in the other thread also, but:

If I buy either an A64 3700+ or an Opteron 146 today, which one will have a better chance to hit 3GHz on air? (under ~1.60V, preferrably under 1.55V)

neoman
04-08-2006, 09:58 PM
its very hard to tell. Id go for 146 since they have better memory controllers also.

funkflix
04-09-2006, 05:06 AM
Don't think so. ;)

I would always prefer the 3700+ because of the 11x multi.

ugp
04-09-2006, 05:26 AM
That 11 doesn't mean anything...

I would choose the Opteron anyday!

[XC] 4X4N
04-09-2006, 08:45 AM
Go with the opty. Even with 9 multi you can still get there. I can go higher than this with more voltage. Look just a few posts back and see a 3ghz 32m pass.

http://img384.imageshack.us/img384/9830/1m9x3393xq.th.jpg (http://img384.imageshack.us/my.php?image=1m9x3393xq.jpg)

Marlowe
04-09-2006, 10:42 AM
I really like your results, 4X4N! I just got a very similar 144 and I'm getting the Sapphire RD580 card tomorrow or the day after. One could guess it could do as well as yours, right? :D What is your cooling?

http://img.photobucket.com/albums/v205/graastein/144.jpghttp://img.photobucket.com/albums/v205/graastein/TCaseMax.png

sponge bob
04-09-2006, 11:13 AM
http://sponge.ez.pri.ee/data/media/3/UUSREKORD.JPG NO COLDBUG finally , + dcie ! Evil & spongebob

http://sponge.ez.pri.ee/data/media/8/OC_022.jpg

[XC] 4X4N
04-09-2006, 11:27 AM
I really like your results, 4X4N! I just got a very similar 144 and I'm getting the Sapphire RD580 card tomorrow or the day after. One could guess it could do as well as yours, right? :D What is your cooling?

Right now it's in my other ultra-d, (AD0 version) with just an xp-90 and panaflo fan. I think I'll pop the lid on this and use my big typhoon. I doubt that I'll get much more out of it, but I'm sure the temps will drop.

EDIT: Very nice sponge bob :toast:

funkflix
04-10-2006, 04:04 AM
That 11 doesn't mean anything...

I would choose the Opteron anyday!

Not? U will love the bigger multi everyday, believe me. :rolleyes:

On my system the 3700+ with a 10 multi can't handle prime95 with 3100MHz, doesn't metter wich voltage or settings, and with 11 i got this - http://213.202.211.105/gravedigga/0547gpmw/prime95_3,5h_3155mhz_1.5V_263mhz_BH5.jpg

U must think, that there can stop u overclocking something else, then the physical limits of the CPU. ;)

Even the 146 is more expensive then the 3700+ here in euroland.

oxia
04-11-2006, 12:23 PM
hi.

first post here.

Opteron 146 0546 GPAW + XP90/Enermax 92mm
DFI Ultra-D (623-3)
2X 1 Go Gskill PC4000HZ
OCZ Modstream

Hope i can do better. Just waiting for my watercooling system.

http://img86.imageshack.us/img86/3069/f300011uz.th.jpg (http://img86.imageshack.us/my.php?image=f300011uz.jpg)

http://img86.imageshack.us/img86/4614/f300024lu.th.jpg (http://img86.imageshack.us/my.php?image=f300024lu.jpg)

Prime stable.

;) from France

petercintn
04-13-2006, 07:08 PM
Here's my Opty 146 CACJE 0603fpmw

http://www.dfi-street.com/forum/showpost.php?p=422935&postcount=170

Hey funkflix, that's nice 3700 you have there. I'd keep it, but I believe it's the exception to the rule.

@_dud
04-16-2006, 05:33 PM
Opty 144 -1.425v@3.0ghz 34hr prime stable on air.
http://img62.imageshack.us/my.php?image=24hrprime30ghz7hg.png

coop
04-16-2006, 05:54 PM
@dud, that is really decent.

Theo404
04-16-2006, 06:36 PM
Opty 144 -1.425v@3.0ghz 34hr prime stable on air.
http://img62.imageshack.us/my.php?image=24hrprime30ghz7hg.png

What stepping? Thats is really an amazing chip :fact:

@_dud
04-17-2006, 12:22 PM
CAB2E 0602 GPAW
I like it. :D

Rufus7
04-17-2006, 12:24 PM
And the Wafercharge?
CAB2E0602GPAW
XXXXXXXC60XXX???

@_dud
04-17-2006, 02:48 PM
does the first line matter? what's it for?
anyways it's 140076AA60093.

Rufus7
04-17-2006, 02:56 PM
Both are important.
Memcontroller>CAB2E0602GPAW<important
Wafercharge important>140076AA60XX<Batch not so interesting.

@_dud
04-17-2006, 03:47 PM
what about the first line ie. OSA144DAA5GN?

CompGeek
04-17-2006, 06:16 PM
what about the first line ie. OSA144DAA5GN?
Just CPU model number, means you have a 144.

jimborae
04-18-2006, 07:04 AM
Opty 144 -1.425v@3.0ghz 34hr prime stable on air.
http://img62.imageshack.us/my.php?image=24hrprime30ghz7hg.png


What board & memory is that with dud??? I'm having real trouble getting my once 3.0ghz stable opty, stable again on my DFI Expert.

@_dud
04-18-2006, 10:15 AM
It is a DFI NF4 ultra-d, and the memory is value vx, but they are on a really low divider and not with any OC during the screenshot.

AgentVX
04-19-2006, 02:02 AM
Got a CACJE 0605BPBW today, went straight under my XP-90 and a Delta 92mm @ 2800rpm.

http://img239.imageshack.us/img239/4792/29sp20041xi.th.jpg (http://img239.imageshack.us/my.php?image=29sp20041xi.jpg)

Just a shade under 2.9GHz at stock volts.

Will keep playing with it...I'll be back when I reach 3G :cool:

Electroid
04-19-2006, 05:24 AM
How about this: Opteron 144, CAB1E 0604.

Stange stepping?

@_dud
04-19-2006, 10:06 AM
How about this: Opteron 144, CAB1E 0604.

Stange stepping?

I've seen Cab1e on an FX something or other once and some dual core opty's, but never on a 144.
It should be pretty good.

Nebulous
04-20-2006, 09:31 AM
Dayum! :eek: All these CACJE steppings doing extremely well. I've got an Opty 148 comming with 0601 CACJE stepping. Hoping she'll give me the 3Ghz with ease on water :cool:

AgentVX
04-21-2006, 12:10 AM
Dayum! :eek: All these CACJE steppings doing extremely well. I've got an Opty 148 comming with 0601 CACJE stepping. Hoping she'll give me the 3Ghz with ease on water :cool:

Best of luck to you :up:
Here's my 3G shot:
http://img155.imageshack.us/img155/9663/3ghz32m1sf.th.jpg (http://img155.imageshack.us/my.php?image=3ghz32m1sf.jpg)
Prime stable at ~2990.

sponge bob
04-21-2006, 09:49 PM
How about this: Opteron 144, CAB1E 0604.

Stange stepping?
i have it, 1,5v 3 ghz prime with air
and max i managed to bull out was 3269 mhz with AIR cooling and SuperPi of 25,406 :banana:

yasoumalaka
04-22-2006, 08:59 AM
Hey guys need your opinion. I getting bored with my oc and I'm going for 3ghz but I am only getting stability after 1.68v in bios and 1.64 smartgaurdian my temps are 45c load and 55c for the pwm. Am I safe???? Sort of? Not at all? Let me know what you think.

neoman
04-22-2006, 09:07 AM
45 @ load is safe, pwm temp could be a bit lower. I d say ur safe

thunderstruck!
04-22-2006, 09:21 AM
Opty 144 -1.425v@3.0ghz 34hr prime stable on air.
http://img62.imageshack.us/my.php?image=24hrprime30ghz7hg.png
Not meant to cramp your overclock, but it's so clear that you cheated on SP2004 (prime lite) since you claim (and it shows in the time elapsed) that it's been running 24h, when the scrolling bar is so very large. Looks more like 1h at most. Just making an observation.

yasoumalaka
04-22-2006, 09:35 AM
I always thought that pwm was good up to like 70-80c. Even though most peoples are much lower. That is really the only temp that worries me. I'd like to put more voltage, but not sure how the cpu will react I've never reallly figured it out I guess because some people say that you can keep uping the volts as long as the temps are good, but then some say otherwise. What do you think?

sponge bob
04-22-2006, 11:40 AM
http://sponge.ez.pri.ee/data/media/3/25.407.JPG Aircooled with estonian cold air ~5*c + zalman9500+

Zeus
04-22-2006, 11:40 AM
Get a fan blowing over the RAM/ PWM area, 55C is pretty hot although with dualcores 60C is a common occurence.

PWM is regulating Vcore, having this IC blistering hot will most likely influence Vcore stability.

I feel unconformtable with PWM ic temps over 40C but i'm a bit paranoid i guess. :D

edit: Uh Sponge Bob posting in between huh? lol, nice result man but at 3269 i get 25.078 , can i have some Estonian air please? ;)

smartasien
04-22-2006, 11:49 AM
After like lots and lots of days of burning in and testing i was finally able to get my 3ghz oc stable. I realized that the major limiting factor was heat, if it got over 54C it would fail prime and sp soon after. Hits a pic of 3ghz 3 hour stable on sp2004.

http://http://img206.imageshack.us/img206/9741/3ghzstable155v8hp.jpg

I have no idea how u guys can oc ur opty's so high, its ridiculous. Is it the cooling? Good steppings? I had to work hard just to get to 3ghz. :confused:

sponge bob
04-22-2006, 12:00 PM
Get a fan blowing over the RAM/ PWM area, 55C is pretty hot although with dualcores 60C is a common occurence.

PWM is regulating Vcore, having this IC blistering hot will most likely influence Vcore stability.

I feel unconformtable with PWM ic temps over 40C but i'm a bit paranoid i guess. :D

edit: Uh Sponge Bob posting in between huh? lol, nice result man but at 3269 i get 25.078 , can i have some Estonian air please? ;)
2x512mb Gskill GH BH-5, i am using 2x256 corsair pc3200 memory :P and 1gb vs 512 is about 0,3-0,4 in superpi :fact: My UTT (teamgroup 2x512)acts crap, 3,4 v 250 mhz and 3,5-3,6v no go :O

Zeus
04-22-2006, 12:15 PM
After like lots and lots of days of burning in and testing i was finally able to get my 3ghz oc stable. I realized that the major limiting factor was heat, if it got over 54C it would fail prime and sp soon after. Hits a pic of 3ghz 3 hour stable on sp2004.

http://http://img206.imageshack.us/img206/9741/3ghzstable155v8hp.jpg

I have no idea how u guys can oc ur opty's so high, its ridiculous. Is it the cooling? Good steppings? I had to work hard just to get to 3ghz. :confused:

Get rid of the heatspreader, this chunk of metal is holding you back big time, second is cooling, overclocking is all about voltage and cooling. ;)



2x512mb Gskill GH BH-5, i am using 2x256 corsair pc3200 memory :P and 1gb vs 512 is about 0,3-0,4 in superpi :fact: My UTT (teamgroup 2x512)acts crap, 3,4 v 250 mhz and 3,5-3,6v no go :O

Yeah, Bank Interleave gives a nice boost.
Did you mess around with Data/drive strength on your Team group RAM?

These two settings seem to be related to Vddr.

BH-5 that doesn't even like 3,5V is a bit hard to imagine.

smartasien
04-22-2006, 12:17 PM
Right now, wondering whether i should remove IHS for cooler temps, isn't it supposed to make a huge difference? How risky is this btw? i don't wanna like cut off a transistor...

Zeus
04-22-2006, 12:21 PM
Use the "search" function, there are a few threads about this subject.

If you take your time it isn't that hard at all.

sponge bob
04-22-2006, 12:50 PM
Get rid of the heatspreader, this chunk of metal is holding you back big time, second is cooling, overclocking is all about voltage and cooling. ;)




Yeah, Bank Interleave gives a nice boost.
Did you mess around with Data/drive strength on your Team group RAM?

These two settings seem to be related to Vddr.

BH-5 that doesn't even like 3,5V is a bit hard to imagine.
what do u advise for data/drive strenght ?

Zeus
04-22-2006, 12:59 PM
That's hard to tell, every memcontroller-RAM combo reacts different.
Mine for one seems to like 7/1 best with BH-5.

Start of with auto and tweak from there.

WannaGoFast
04-23-2006, 03:20 AM
Opteron 146 CAB2E 0604 DPAW retail box just shipped from the egg.
Was able to run Prime Torture Test all the way up to 2.96 at 1.4v.
To get it Prime stable at 3.0 I had to raise vcore to 1.45. But I don't think
it's the cpu giving out yet, Just topping out this ASUS A8N Sli Deluxe.
Guess I need a to consider a better motherboard at this point.

Is the DFI LANPARTY UT nF4 Ultra-D still the best bang for the buck if you don't need SLI?

HiJon89
04-23-2006, 05:37 AM
Opteron 144 CAB2E 0602GPMW
DFI Ultra-D
2GB OCZ UCCC

http://img.photobucket.com/albums/v629/HiJon89/Opteron%20144/3150SP2004.jpg

sponge bob
04-23-2006, 09:38 AM
OMFG thats sickest opteron 144 aircooled result so far i think

Zeus
04-23-2006, 09:40 AM
Wow, is that watercooled?
51C is blistering hot but 3150MHz prime stable for 13 hours is very nice! :up:

before
04-24-2006, 10:34 AM
Opteron 146 CABYE 0540FPBW - Liquid Chiller CPU@+3°C

http://img223.imageshack.us/img223/8708/cpu35112rp.png

http://valid.x86-secret.com/show_oc?id=89153

kingmaker_20
04-24-2006, 10:48 AM
Opty 144 -1.425v@3.0ghz 34hr prime stable on air.
http://img62.imageshack.us/my.php?image=24hrprime30ghz7hg.png


The Prime ran 24hours?something wierd on the screnie:D

dogsx2
04-24-2006, 03:11 PM
What was the room temp? CPU at 51c and PWMIC at 32c on a Ultra-D usually means environmentally controlled room. ;)

squaresoft
04-25-2006, 07:32 AM
Hello, I have bought a new opteron 148 with stepping CAB2E 0604CPMW
What can you say about this opteron?
Thanks :)

before
04-25-2006, 10:41 AM
Opteron 146 CABYE 0540FPBW :D

http://img286.imageshack.us/img286/8345/cabye0540fpbwscpu1m35040fp.jpg
http://img258.imageshack.us/img258/2667/cpu36320aa.jpg

sponge bob
04-25-2006, 11:47 AM
1,9v omfg :D

coop
04-25-2006, 05:19 PM
Hello, I have bought a new opteron 148 with stepping CAB2E 0604CPMW
What can you say about this opteron?
Thanks :)
This shot is from another forum with a 0604cpmw.

xerogenesis
04-26-2006, 06:23 AM
i see some of u guys clocked to 2.9 on ur opterons and getting sub 30 sec superpis, for some reason at 2.9 im only pulling off 31-32 seconds

RekLess
04-26-2006, 07:02 AM
Just received an Opty 146 from Monarch - CACJE 0606MPMW. Anyone tried OC'ing this stepping? If so, please post your Hz and Volts. Thanks

Rufus7
04-26-2006, 09:04 AM
There are X2 LBDHE0606APMW known.
Under Dice up to3,6Gig under water around 3Gig.

wittekakker
04-26-2006, 11:37 AM
i see some of u guys clocked to 2.9 on ur opterons and getting sub 30 sec superpis, for some reason at 2.9 im only pulling off 31-32 seconds
Dude, with 2,9GHz u should easely get sub30. Get some decent dual channel RAM clocks and u will get it.

RekLess
04-26-2006, 05:14 PM
Just received an Opty 146 from Monarch - CACJE 0606MPMW. Anyone tried OC'ing this stepping? If so, please post your Hz and Volts. Thanks

Here's an update - currently "toasting" at 2.95GHz with 1.6v on air. :) I'm tempted to see what it'll do naked on water...

It ran 4hrs Prime at 2.8G/1.42v.

eraser
04-27-2006, 02:38 AM
CACJE 0607 EPAW
http://img140.imageshack.us/img140/7753/275cp.jpg (http://imageshack.us)
http://valid.x86-secret.com/show_oc.php?id=89626
2.8ghz stable with 1.35V for 24/7 :banana:

RekLess
04-27-2006, 05:25 AM
eraser, where did you get your chip? It looks like this year's week 6 and 7 chips are pretty strong.

popol55
04-27-2006, 05:55 AM
Opty 144
CAB1E 0605 GPBW
3010mhz@Vstock
Aircooling Xp90

http://popol55.no-ip.com/~popol/hfr/144/144.CAB1E.0605@3010@vstock.jpg

Max screen aircool :
http://popol55.no-ip.com/~popol/hfr/144/cpu-3453@1.648.jpg
http://valid.x86-secret.com/show_oc?id=86710
temp room 17°c
processeur : 38°c

-------------------------------------------------------------------------------------

Opty 144
CAB1E 0604 CPBW
2900mhz@stock
3030mhz@1.504v
Aircooling Xp90
temp room 25°c

http://popol55.no-ip.com/~popol/hfr/144/144.CAB1E.0604.CPBW@2900@vstock.jpg
http://popol55.no-ip.com/~popol/hfr/144/144.CAB1E.0604.CPBW@3031@1.504.jpg

-------------------------------------------------------------------------------------

Opty 144
CAB2E 0610 GPAW
2874mhz@stock
2970mhz@1.536v
Aircooling Xp90
temp room 25°c

http://popol55.no-ip.com/~popol/hfr/144/1.144.CAB2E.0610.GPAW@2874@stock.jpg
http://img241.imageshack.us/img241/2938/3144cab2e0610gpaw297015368vo.jpg

:toast:

From france :clap:

neoman
04-27-2006, 08:19 PM
Omg this makes me want to try 144 even more :O
I presume IHS was still on ?

popol55
04-27-2006, 09:37 PM
Omg this makes me want to try 144 even more :O
I presume IHS was still on ?

No IHS mod :D

God_Lx
04-27-2006, 09:45 PM
Got this 148 yesterday, still testing it out...

http://img137.imageshack.us/img137/7133/stressprime29006vy.jpg

It's a CACJE 0544 EPAW... Does 3050Mhz stable @ 1.45 but my temps are wayyyy high... Is it usual ? I have about 40º idle and 54º full with 1.45v, cooling is a XP90c + Tornado 92mm... My Venice wouldn't do more than 39º @ 1.6v with the same cooling... Already remounted it 3 times to check good contact and thermal grease, all's fine...

I can change it for a 148 CABYE 0536 GPMW what do you think ?

popol55
04-27-2006, 10:12 PM
It's the same for me with my xp90.
> 1.5v my temps are very high, 40° idle and 55° in full

Opteron releases more heat than the venice :(

Try maybe an IHS mod :confused:

AgentVX
04-27-2006, 10:49 PM
Opty 144
CAB1E 0605 GPBW
3010mhz@Vstock
Aircooling Xp90

http://popol55.no-ip.com/~popol/hfr/144/144.CAB1E.0605@3010@vstock.jpg


Amazing stuff man, nice one :toast:


I can change it for a 148 CABYE 0536 GPMW what do you think ?

My first Opty was a 144 CABYE 0536GPMW, I think most people who had one will tell you not to bother :p:

popol55
04-27-2006, 11:07 PM
8x coeff, for fun, max htt maybe

http://popol55.no-ip.com/~popol/hfr/144/cpu-3414.jpg

Timmay
04-27-2006, 11:57 PM
First Post Here:

AMD Opteron 144 CAB1E 0604 CPBW
3GHz @ 1.44v :banana:
http://img146.imageshack.us/img146/1232/3ghzsp30mins7pp.th.jpg (http://img146.imageshack.us/my.php?image=3ghzsp30mins7pp.jpg)

Smy
04-28-2006, 07:38 AM
MD Opteron 144 CACJE 0604 APMW

Is it good and are there anyone who have test one?

celemine1Gig
04-28-2006, 12:01 PM
MD Opteron 144 CACJE 0604 APMW

Is it good and are there anyone who have test one?

I don't have that stepping, but it sounds like a really good one from the info that you've given. ;) I've seen some APMW CPUs do really good and CACJE seems to clock good when aircooled.

white_zombie
04-28-2006, 12:09 PM
I have a problem, my opteron cab2e 0546gpaw, have high temp than X2 4400

whate cooling

X2 4400@2500 temp idle 31º
Opteron 146@2800 temp idle 34º

i look the temp whit ite smart guardian of DFI

celemine1Gig
04-28-2006, 12:15 PM
I have a problem, my opteron cab2e 0546gpaw, have high temp than X2 4400

whate cooling

X2 4400@2500 temp idle 31º
Opteron 146@2800 temp idle 34º

i look the temp whit ite smart guardian of DFI

I'm sorry if I don't see your point, but who cares about idle temperatures?

Show us the difference in load temps, then we can talk about a real difference. BTW, no CPU is like the other, thus temperature values can differ quite a lot from one to the other.

white_zombie
04-28-2006, 12:20 PM
in load its 7º high opteron than x2 4400

popol55
04-28-2006, 12:42 PM
Go IHS mod :D

FireD
04-29-2006, 05:00 PM
hi, i have an Opteron 144, he makes 2900mhz@1,45v but when i go higher to 3000mhz he needs 1,61v -.- and all over 3ghz is unstable, i have an dfi lanparty ultra-d, cpu without IHS and bh-5 rams. Can some one give me tips? or better timings?

http://img84.imageshack.us/img84/2963/xspost2kw.jpg (http://imageshack.us)

[XC] 4X4N
04-30-2006, 09:33 AM
Have you lowered your multi and tested your ram for max clocks? Might be the ram that's causing instablity. Try tref 3684, drive strengths at 7/1 and maybe play with mal and rp settings. Also, I'm completely stable at 3.0ghz, but even with more voltage can't get past 3.05ghz. You might just be at the cpu's limit. Good luck. :)

s7e9h3n
05-01-2006, 12:44 AM
Not meant to cramp your overclock, but it's so clear that you cheated on SP2004 (prime lite) since you claim (and it shows in the time elapsed) that it's been running 24h, when the scrolling bar is so very large. Looks more like 1h at most. Just making an observation.
HAHAHAHAHAHA....try 33 minutes ;) Look at his start time, then the time on his clock, then the time/date of his post :clap: :clap: :clap:

http://img62.imageshack.us/img62/7628/24hrprime30ghz7hg.png

Zeus
05-02-2006, 12:32 PM
My little Opteron 146 seems to get better and better over time.
50% overclock on stock voltage is pretty nice in my book:

http://img.photobucket.com/albums/v620/Z3us/screenshots/3hrsPrime3GHzstockV.jpg

Load temp is only 30-31C
Just on plain water and 20C room temp.

Does Prime up to 3170MHz and SuperPi 32 at 3230MHz (see sig) but won't run 1M over 3260MHz -- have to work on that. ;)

popol55
05-02-2006, 09:35 PM
http://img356.imageshack.us/img356/7098/31265df.th.jpg (http://img356.imageshack.us/img356/7098/31265df.jpg)

Always on air with xp90

daysleeper
05-03-2006, 08:17 AM
Zeus not bad ;)

LittleDevil
05-03-2006, 08:33 AM
http://www2.shrani.si/thumbs/3100488409.jpg (http://www2.shrani.si/files/3100488409.jpg)

fullup3
05-03-2006, 03:59 PM
Nice chip there littleDevil.

el rolio
05-03-2006, 05:05 PM
heya, does anyone know if the early cabne 0530 apmw's were known to be cold bugged? in general? what about for a single stage to -20º?

Absolute_0
05-03-2006, 05:23 PM
Hey dude

Should work fine on -20c core :)

They do DICE too i think, should get to -35c or so with pretty high HTT. Not very coldbugged compared to latter Opterons

starostise
05-03-2006, 05:23 PM
this step does not coldbug a lot:

nearly at 360htt for -20°C I think

el rolio
05-03-2006, 05:42 PM
thanks guys, any body else?

s7e9h3n
05-03-2006, 11:27 PM
OPB's currently got this cpu. He'll be testing it on his cascade tomorrow and if it's fine at those temps, you'll be seeing it on my -120C autocascade. Also, OPB should be receiving #0001 any day now ;) Time for some single core Opties to give us some more mind boggling numbers :wth: If anyone's interested in purchasing this cpu, drop me a PM, but I warn you....it's not gonna be cheap. On SINGLE STAGE:

http://www.ocxtreme.org/onepagebook/op154n2/op154tpmw2.jpg

http://www.ocxtreme.org/onepagebook/op154n2/op154s34g8m.jpg

http://www.ocxtreme.org/onepagebook/op154n2/op154sbh535g1m.jpg

http://www.ocxtreme.org/onepagebook/op154n2/op154sbh535g16m.jpg

el rolio
05-04-2006, 03:20 AM
hahah nice steven. again folks, someone is asking me about cold bug info, this time on the other chip i have for sale, opb will recognise it.... CABYE 0543
-
http://mail.kilter.com/ftpclients/matthew/ForSale_Jan06/CABYE_ihs.jpg

and the one from before
-
http://mail.kilter.com/ftpclients/matthew/ForSale_Jan06/CABNE_ihs.jpg


yep, i really want someone to buy these chips and put them under sub-ambient. i wanna see em SHINE!

el rolio
05-04-2006, 07:19 AM
My little Opteron 146 seems to get better and better over time.
50% overclock on stock voltage is pretty nice in my book:


dude. OMGzzzzzzzz :eek: thats pretty good in ANYONE's book. can i ask how you have trained it so well that it can do these things? get better over time? do you TSST it? DOMINATE? like the dog whisperer did to cartman? if there was something you have been doing over the course of the chips life, please let me know! i'd love to train mine into submission!

Zeus
05-04-2006, 08:59 AM
dude. OMGzzzzzzzz :eek: thats pretty good in ANYONE's book. can i ask how you have trained it so well that it can do these things? get better over time? do you TSST it? DOMINATE? like the dog whisperer did to cartman? if there was something you have been doing over the course of the chips life, please let me know! i'd love to train mine into submission!


Ghehe, i'm gonna learn it to fetch and sit up straight for me. :D

Seriously, i burned it in with Prime95 for a couple of days when i first got it and a few weeks ago i decided to chop 'n pop it's top.

Beside that, the daily abuse (3GHz at 1.4V) seems to be enough to make this chip what it is now.
From now on it will run 3GHz at stock voltage 24/7.

I hope the max benchable frequency will go up in time as well. :)

Btw, going back some 180 (!!) or so pages back you can see how it performed when i first got it, it did Superpi 1M at 3GHz stock voltage and that was pretty much all.
Still not bad but it improved a hell of a lot over time.

el rolio
05-04-2006, 09:56 AM
aww man! i wass hopin for some super voodoo style where you remove 10mv every month or so and prime for a day and then you eventually get back to stock volts.

soooooooooo dissapointed! :P
thanks fo the reply. we'll see what my chip does for me. its at home priming and curing the AS5 at stock volts, 290x10

Zeus
05-04-2006, 10:20 AM
Sorry mate, can't make it any more beautifull than it is. ;)

s7e9h3n
05-04-2006, 10:24 AM
hahah nice steven. again folks, someone is asking me about cold bug info, this time on the other chip i have for sale, opb will recognise it.... CABYE 0543

yep, i really want someone to buy these chips and put them under sub-ambient. i wanna see em SHINE!
I've had a friend tell me about the CABYE 0543's. He tells me that they bug @ ~-40Core IIRC. The ONE CABYE Opty I tried barely booted @ -50C Windows temp @ 1.60V :rolleyes: I actually had to turn my autocascade OFF with the cpu running in order to get "hot" enough so I could boot. The chip was able to run OK (300HTT) @ ~-30C core temps while my unit was off :p:

jimwah
05-04-2006, 10:25 AM
I recently had to swap out the RAM in my 144 folding box, & start from scratch to get back to the 2.6Ghz it was at (I think @ 1.45v). Managed to get 2.9Ghz this time @ 1.52v, but using a divider since I have dirt cheap 2x256Mb sticks in there now (they could probably handle more than 214mhz but I haven't had time to eek any more out of 'em). Its been folding 24/7 since and hasn't budged @ 40c :D Some great OC's in this thread.

cadaveca
05-04-2006, 12:13 PM
I've had a friend tell me about the CABYE 0543's. He tells me that they bug @ ~-40Core IIRC. The ONE CABYE Opty I tried barely booted @ -50C Windows temp @ 1.60V :rolleyes: I actually had to turn my autocascade OFF with the cpu running in order to get "hot" enough so I could boot. The chip was able to run OK (300HTT) @ ~-30C core temps while my unit was off :p:

my 0543 starts to show issues @ 10c. it actually clocks better on air than water. took 1.75 @ 4c for 3350mhz, primed for 2 hours. and then my board tossed it's cookies. I just got a 8L res for my chiller, so I'll be trying again soon.

Viss
05-05-2006, 11:49 AM
hahah nice steven. again folks, someone is asking me about cold bug info, this time on the other chip i have for sale, opb will recognise it.... CABYE 0543

This is a 148 CABYE 0543 ive had. Stock Mach II and around -20 idle in MBM.

http://img.photobucket.com/albums/v636/loc_oc/148test.jpg

el rolio
05-05-2006, 12:20 PM
thanks man, awesome clockage. like i said to my window shoppers... throw 1.6v at these chips and let me see em FLY!

Viss
05-05-2006, 12:31 PM
This is the only screen i have for you unfortunately. This was max 1M with this vcore. It did a little less then me 146 and sold it. IIRC coop put one under dry ice and had great 32M results, screens included.

funkflix
05-06-2006, 09:33 AM
Still stable with summer temps (about 25-26°C roomtemp), thats good, but even no go with just 3050MHz.. error after 1min. The only good thing on this cpu is, that i can bench it with 3150-3200MHz.. :stick:

http://213.202.211.105/gravedigga/0546GPAW/4h_Prime95_3000MHz_1.57V_25grad_zimmertemperatur.j pg

I really want to get back this 3700+ - http://213.202.211.105/gravedigga/0547gpmw/prime95_3,5h_3155mhz_1.5V_263mhz_BH5.jpg :)

eva2000
05-06-2006, 09:54 AM
hahah nice steven. again folks, someone is asking me about cold bug info, this time on the other chip i have for sale, opb will recognise it.... CABYE 0543


Got the same cpu 148 CABYE 0543FPMW with 013x serial number going on phase hopefully sometime after May 15th when my phase change unit arrives http://i4memory.com/showthread.php?p=40919#post40919 :)

http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron148/CABYE_0543FPMW/HC200EX/Gskill/PC4400LE/2x512/799_800/1114_3/LDT3x/11x/282-282-2.5336-7-20-2223_1.62-1.5-1.6-2.9_3684_ds7dds2_8F55/superpi-32m_23m22s_tn.jpg (http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron148/CABYE_0543FPMW/HC200EX/Gskill/PC4400LE/2x512/799_800/1114_3/LDT3x/11x/282-282-2.5336-7-20-2223_1.62-1.5-1.6-2.9_3684_ds7dds2_8F55/superpi-32m_23m22s.jpg)

:)

Rufus7
05-06-2006, 10:20 AM
@ El Rolio like my Baby CABNE0530APMW
1288864G50072


http://img409.imageshack.us/img409/9870/3000mhz1328vc8h31minprime24145.th.jpg (http://img409.imageshack.us/my.php?image=3000mhz1328vc8h31minprime24145.jpg)

Zeus
05-06-2006, 11:03 AM
Geez Rufus, that one is even sicker than my CABNE0530APMW that does 3GHz at 1.36V, that's watercooled i assume?

el rolio
05-06-2006, 11:34 AM
@ El Rolio like my Baby CABNE0530APMW
1288864G50072


uh, YES! FRIKKEN RIDICULOUS>?!?!?!?

ok ive saved up this icon for some time now

:toast: TOAST to you sir. 1.32v @ 3GHz goddamn!

Rufus7
05-06-2006, 12:12 PM
Zeus of course watercooled!
You can see my System in the Signature.
Lics MasterfreezerII CPU Cooler
Laing DDC Pro Waterpump. Soon a Duallaing Waterpump from Watercool!
Tygon R3603 11,2mm/8mm Pipelines. Soon 15,9mm/11,1mm Pipelines.
2x Black Ice Extreme II Dual Radiators. Soon with an Stealth Gen Two Triple Radiator.
And an CC25 Waterreservoir CC25.
And 1/4" Fittings .
4x Silenx Xtrema Pro 63cfm 120mm Vents on the Black Ice Radiators.

http://img216.imageshack.us/img216/564/duallaing18hh.th.jpg (http://img216.imageshack.us/my.php?image=duallaing18hh.jpg)

http://img289.imageshack.us/img289/2725/duallaing25hz.th.jpg (http://img289.imageshack.us/my.php?image=duallaing25hz.jpg)

splmann
05-08-2006, 11:53 AM
Here some results from Switzerland !

http://www.bilder-hosting.de/img/BU1DX.jpg (http://www.bilder-hosting.de/show/BU1DX.html)


http://www.bilder-hosting.de/img/BUORZ.jpg (http://www.bilder-hosting.de/show/BUORZ.html)



SPLMANN

a Member of overclocking team switzerland

The Amish Kid
05-09-2006, 12:46 PM
Well this isnt too extreme like some onf you guys but I'm still new to overclocking. It's a 146. The stepping is CAB2E 0602 GPKW, the actual voltage was 1.625. It's weird it does 3ghz 32M stable at 1.475v but willn't go past 3.15 with 1.6v. I think it might be my motherboard(evga nforce 4sli) but im not sure.
http://i21.photobucket.com/albums/b271/shmuck914/3ghz-Primstable.jpg

Lane-k
05-09-2006, 06:47 PM
Here some results from Switzerland !

http://www.bilder-hosting.de/img/BU1DX.jpg (http://www.bilder-hosting.de/show/BU1DX.html)


http://www.bilder-hosting.de/img/BUORZ.jpg (http://www.bilder-hosting.de/show/BUORZ.html)



SPLMANN

a Member of overclocking team switzerland

Welcome!!! where are you from guy..?

splmann
05-11-2006, 02:51 AM
@Lane-K

ich bin aus Staad am Bodensee in der nähe Rorschach!
Und wer bist du ?


Gruss

Roger

Garrett
05-11-2006, 08:15 AM
Mit freundlichen Grüßen... LOL
English please ;)
Otherwise others won't understand :eek:

splmann
05-11-2006, 09:02 PM
@Garrett

Sorry i was talking with my friend SwissGerman.


Regards

Roger

cas123
05-15-2006, 02:15 PM
Awesome combo you got there Splmann. I think I got to swith my MB ;)

Marlowe
05-15-2006, 11:31 PM
http://img356.imageshack.us/img356/7098/31265df.th.jpg (http://img356.imageshack.us/img356/7098/31265df.jpg)

Always on air with xp90Very nice results there! If that clock in your sig is right, you must have a very good 144 :)

I have much of the same hw as you.. 144 and 2x512 A-Data DDR600 ram. You have this ram also, right? I cannot run them at 2,5-3-3 even at 200 MHz on AMD platform tho :( Only 2-2-2 works! Do you have any tips?

Thanks :)

eizei
05-16-2006, 05:39 AM
Is CAB1E 0604 CPMW a very good stepping for an opteron 144?

187(V)URD@
05-18-2006, 11:56 AM
dunno, test and you' ll find out and report back :)

[XC] 4X4N
05-22-2006, 07:17 PM
Just doing a little messin around tonight and thought I'd post this. Highest I've got it to. CACJE 0602 GPMW. This 144 is the best chip I've had. Pretty damn good results for the $$ :D but just looks bad compared to all the conroe results :lol:
sorry for the :banana: :banana: :banana: :banana: pop-ups
http://img461.imageshack.us/img461/380/9x3431m1uf.th.jpg (http://img461.imageshack.us/my.php?image=9x3431m1uf.jpg)

http://img114.imageshack.us/img114/1006/9x33932m4jv.th.jpg (http://img114.imageshack.us/my.php?image=9x33932m4jv.jpg)

K6dude
05-24-2006, 12:56 PM
I know that most if not all of you use the DFi, so thought you might be interested in a different brand


MSI 7100 SLi NForce4 with the latest BIOS 1.9/3.9
An Opteron 170 week 0550 VPMW running fully stable since January folding currently at 2810MHz at 1.38v. CPU 40°C under load, system temp at 26°C.
2x512MB OCZ Platinum PC4800 at 2.5-4-4-10-1T (default settings) at 2.85 v.

The rig is folding 24/7

Had it at 2924MHz January to April but with 1.41v and higher CPU temp, backed it off since last month to preserve it through the summer temps!

My old Venice 3000+ ran at 2812MHz in this rig until January...brilliant little chip!

K6dude

LittleDevil
05-25-2006, 11:31 AM
http://www2.shrani.si/files/noro570761.jpg

http://www2.shrani.si/files/img3485570639.jpg

daysleeper
05-25-2006, 02:19 PM
Is CAB1E 0604 CPMW a very good stepping for an opteron 144?
Miine is just that and now its 2700Mhz 1,55V im pretty disappointed because everyone else hits 3Ghz... :( ...but more testing.... http://murobbs.muropaketti.com/thread.jsp?forum=20&thread=409235&start=2310&msRange=70 some finnish testing...

gsan
05-27-2006, 01:05 AM
Opty 146 2900 @ 1.5v

http://img164.imageshack.us/img164/7230/29005mg.th.jpg (http://img164.imageshack.us/my.php?image=29005mg.jpg)

sofarfrome
05-27-2006, 04:46 AM
I am giving this the SP2004 test right now. It already passed at 3.0GHz for 11 hours.

http://img119.imageshack.us/my.php?image=10013507os.jpg



SPECS:
144 Opty CAB1E 0614BPMW
G.Skill PC3200-FX TCCD
DFI LP NF4 Ultra-D
XFX GForce 7600GT XXX
Antec P160
Antec TPll 550W PSU
Thermalright XP-90 w/Panaflo fan

Marlowe
05-27-2006, 05:05 AM
I am giving this the SP2004 test right now. It already passed at 3.0GHz for 11 hours.

http://img119.imageshack.us/my.php?image=10013507os.jpg



SPECS:
144 Opty CAB1E 0614BPMW
G.Skill PC3200-FX TCCD
DFI LP NF4 Ultra-D
XFX GForce 7600GT XXX
Antec P160
Antec TPll 550W PSU
Thermalright XP-90 w/Panaflo fanVery nice.. wish I could do that.. :mad: *jealous*

Do you have a pic of A64Tweaker and/or some tips? :)

sofarfrome
05-27-2006, 06:18 AM
Here is pic of the latest SP2004 test on going with A64 Tweaker.

As far as tips go I can't really give any right now as I have yet to get to a point where I need to tweak things. The best advice would be to go to the ebay person where I bought this one (new: $131 shipped) and see if she has another like this. Last I knew she had 28 left but she won't tell you the stepping. I lucked out on this one being a CAB1E 0614BPMW which seems to OC like mad. Go to ebay and type in opteron 144 and look for a seller named betha???. I think there are only 3 listings so she should be easy to find. She also has 165s and 146s if not more.



http://img135.imageshack.us/my.php?image=144opty31ghztccd7mv.jpg

Emperor
05-27-2006, 07:41 AM
need some help here guys
i am running at 2.9ghz at 1.564vcore but it isnt occt stable for more than a few minutes. it was stable at 2.8ghz with 1.560vcore and prime stable for 9hrs(cpu stress only)

i've seen others running 2.8ghz or more on stock vcore or >2.9ghz below 1.56vcore/

why is this so??


plus
how to increase memory allocated for superPI?
i noticed despite oc-ing, the superPi times do not change much and i attribute this to the memory allocated which remains stuck at 8388648, despite having 1679122432 as real available memory.