The Official Opteron 939 Overclocking Thread [Archive] - Page 13

TurboGLH

11-16-2005, 05:24 PM

ok, show me some prime stabe 144 cab2e's doing 2.8ghz plz without ridicolous volts, most do 2.6ghz - 2.8ghz and have only seen 2 over 2.8ghz but not sure they was prime stable

What do you define as ridiculous volt's? Here's one of the two 144 CAB2E 0540 FPMW's that I got. I don't have any prime screen shot's but it's first night out it ran for 12+ hr's at the speeds below. 1.62 in the bios, showing 1.52 in windows using the latest version of cpuz. If you don't want to take my word for it, I'll see about getting some screens after a night of p95.

http://valid.x86-secret.com/show_oc?id=49777

Screen shot:

http://i2.photobucket.com/albums/y17/TurboGLH/opty1441gigoc.jpg

D4nnyOcean

11-16-2005, 06:15 PM

Just a Update on my OC so far of my 146 CABYE 0540 FPAW

http://img.photobucket.com/albums/v136/wayland7/146-3.jpg

Was a little unstable @ 3.1 but did run a 1M SuperPi with NP. Can probably get a little higher with some memory tweaking but I think its starting to run out of gas. :confused:

Doing 3GHz stable 100% load for 24hrs at only 1.45v :D
All of this was with watercooling.

dimasdw

11-16-2005, 07:27 PM

stay away from 1.7v i think too much voltage.

1.7 V can kill my Proc ?

KoHaN69

11-16-2005, 07:33 PM

http://img468.imageshack.us/img468/3231/30501mhz6qr.jpg

2.94 stable

NYCTeeN82

11-16-2005, 07:57 PM

Aphex_Tom_9

11-16-2005, 08:46 PM

Can anyone answer me this question......

I just got a DFI mobo from Newegg. It was not shrink wrapped nor was there a sticker between the box and cover. Do DFI mobo's not come sealed?

I just want to know whether I was duked with a used mobo, or this is how they come.....

Thanks in advance
I bought my DFI from a guy on ebay, it came in a brown box in an anti-static bag with nothing else. I am 99% sure it is brand new however.

alpha0ne

11-16-2005, 09:33 PM

at last with Vcore 1.7　V , 18 C room temperature i can push my CABGE 0536 GPMW to run super Pi 1 Mb at 3 Ghz ,not good result but i am happy can run super Pi 1 Mb with 3 Ghz :)

My cabbage

http://i16.photobucket.com/albums/b29/alpha0ne/1M3020.jpg

:fight: :poke: :D

Primoz78

11-16-2005, 10:23 PM

Mine 146 0540 CABYE FPBW can do 3ghz @1.408V...but it is stragne, cause 3times it passed 16h+ SP2004 now can`t pass it any more...but is OCCT, Super_32m and 3dmark05 100% stable...I can`t pass 300HTT stable even at 1,55V...could it be the MOBO that can`t do 300HTT+? This is my 2nd Ultra-D MOBO and before I had an 0517APAW 3000+ Venice that can`t pass 300HTT...but when I sold it to a friend he can run it @320HTT withouth problems... :slapass: :slapass: :slapass: I have changed alos the PSU but the problem is still here...Any ideas?

Regards,
Primoz

Shark-357

11-16-2005, 11:12 PM

If u ask me the reason is freaking Tagan PSU´s that sux and are limiting my OC with unstable lines

Primoz78

11-16-2005, 11:26 PM

Thx Shark for your oppinion...I had an Tagan 480W before this one and I also think the PSU it could be the cause of instability...

Regards,
Primoz

alpha0ne

11-16-2005, 11:30 PM

I have the same PSU as you Primoz78, Tagen 580 U15 Modular

While I have'nt checked out the rails yet (will do later and report back) it certainly has not changed any of my overclocks or stability after I very recently changed from my Bluestorm 500 which my Son needed (stole :eek: )

BioPC

11-17-2005, 12:43 AM

If u ask me the reason is freaking Tagan PSU´s that sux and are limiting my OC with unstable lines
Havent you adjusted the pot yet?
My tagan 480-u22 was reading 11.7v on the 12v line when stressed. The trick made my psu much more stable and is now reading ~12.05v at full load.
Works as well for the Tagan 530-U22.
More information about posted here:

http://www.xtremesystems.org/forums/showthread.php?t=56403&page=1&pp=25

alpha0ne

11-17-2005, 01:30 AM

Thanks for the find BioPC :clap:

5days

11-17-2005, 04:26 AM

Does anyone know what is the highest overclock on a 146 (or any other Opteron) with stock Vcore? I'm at 2920MHz 40 Minutes Prime Stable on my 146, will throw 32M at it later.

http://www.xtremesystems.org/forums/showthread.php?goto=newpost&t=80306

tatts

11-17-2005, 05:25 AM

i had 2.9ghz with mine on stock volts (fpbw) but i was rushing for 3ghz lol so never tried max on stock V

5days

11-17-2005, 05:53 AM

ManagHead

11-17-2005, 06:07 AM

Got my 146 CABYE 0540 FPMW today. So far this is the best it could do with the boxed cooler:
http://home.no/datamods/Opteron/300x10.JPG
Couldn't even run sp on this speed though, more to come :D

sponge bob

11-17-2005, 06:39 AM

what do u guys think adding some voltage do my opteron 144, i have h2o , temp are like @3 ghz under 40*c
is 1,7v safe or shm :slobber: ?? my opty loves voltage

ManagHead

11-17-2005, 06:42 AM

I think 1,7V will be just fine so long the temps are respectable.

After some more testing I can do sp 1m on 3ghz, but it's too hot! From 1,5V to 1,52V its getting just worse. May I will test under my phase change cooler later..

overcrash86

11-17-2005, 06:46 AM

any result for CAB2E 0542 EPMW ?

SPivX

11-17-2005, 06:55 AM

i just got my 2 CABYE 0540 FPMW in :-) i will hook 'em up and start benching. results will be posted!

freestylercs

11-17-2005, 08:07 AM

Here are my new four CPUs:

http://mitglied.lycos.de/freestylercs95/hpbimg/0540er.JPG

all with Heatspreader

1. 146 0540 FPBW 0203er Batch
3000MHz@1,39V
3100MHz@1,47V
3140MHz@1,52V

http://mitglied.lycos.de/freestylercs95/hpbimg/3140MHz@1,52V%200203er.JPG

2. 146 0540 FPBW
3000MHz@1,45V
3100MHz@1,56V

http://mitglied.lycos.de/freestylercs95/hpbimg/3100MHz@1,56V.JPG

3. 146 0540 FPBW 0524er Batch
3000MHz@1,42V

http://mitglied.lycos.de/freestylercs95/hpbimg/3000MHz@1,42V%200524er.JPG

4. 144 0540 BPMW 0590er Batch

http://mitglied.lycos.de/freestylercs95/hpbimg/0540BPMW@2754MHz.JPG

Next week ill get 148er FPBWs

free

kakaroto

11-17-2005, 08:12 AM

nice freestylerCS :D

What cooling are you using?

pancake

11-17-2005, 08:15 AM

finally got my 146 CABYE 0540 FPMW

went stright for 2.7 on stock volts all seems stable enough. done on air using Gigabyte G-Power Cooler Pro ( had to recycle the as5 off the heatsink and my old winnie to use on the opty as i left my as5 at my mums lol) so far looking promising

http://img405.imageshack.us/img405/8829/277mi.jpg

freestylercs

11-17-2005, 08:16 AM

nice freestylerCS :D

What cooling are you using?

watercooling:

1AHV2 CPU cooler+
tripple radi
Eheim 1048 pump

free

Jupiler

11-17-2005, 08:22 AM

tatts

11-17-2005, 08:29 AM

im thinking of removing my ihs but will it be ok with a swiftech storm & how delicate is the core?

freestylercs

11-17-2005, 08:34 AM

Nice cpu's, free. But I already told you that. :)

Looks like the IHS is seated very well on yours, looking at the load temps.
Mine is reaching the 50's at 3100 and 1.568V (not fully table though).
Still puzzling if I should take it off or not.

yes, the 146 0540 FPBW with 0524er Batch is really hot too.
Under 1,5V and 3100MHz there is a Temp >50 Grad. And prime do not like temps >42.

free

tatts

11-17-2005, 08:36 AM

near same batch as mine, CABYE 0540FPBW - 0564 :D

SPivX

11-17-2005, 08:52 AM

Did some very quick and dirty testing. CABYE 0540 FPMW 0001 initial results:

http://80.61.226.251/~sp/superpi/spi32m_10x280.JPG

RAM on a 1/2 divider, LDT multi @ 3x, RAM timings at default. Bios 704-2BTA. 2 be continued! :banana:

pancake

11-17-2005, 09:03 AM

most i can stable on stock volts is 2890 , 2.9 errors in sp2004.
running at 3g now with 1.45v , temps are creeping towards 50c though so i think i need my as5 to reapply on the cpu. may have to get my mach 2 on this cpu see what it will really do

Raven.exe

11-17-2005, 10:30 AM

my new cpu - CABYE 0540 FPBW 0196

now i just need the rest of the rig..hopefully i'll be getting teh DFI Ultra-D next week sometime.

Monge

11-17-2005, 10:47 AM

Here are my new four CPUs:

http://mitglied.lycos.de/freestylercs95/hpbimg/0540er.JPG

all with Heatspreader

Very nice collection and nice results also :)
Congrats :toast:

FriGidi

11-17-2005, 10:56 AM

Heres my CABYE 0540FPBW "0275"
2950MHz (http://img113.imageshack.us/img113/4340/295gsp20043to.jpg) SP2004 +11h with crappy watercooling

Extra voltages doesn´t help. Tried 1.56-1.68vcore, no help :(

Primoz78

11-17-2005, 11:00 AM

near same batch as mine, CABYE 0540FPBW - 0564 :D

Mine CABYE 0540FPBW - 0200 is also hot...with 1.52V and 3,1ghz It can reach 50°C with water cooling... :slapass: But unfortunately not stable at this settings...strange, cause for 3ghz needs only 1,408V (SP2004 16h+) but nothing could help to push it further... :rolleyes:

Regads,
Primoz

LukeK

11-17-2005, 11:30 AM

ordered a 146 retail from monarch yesterday got it today.
CABYE 0540FPAW

in case anyone was wondering what they're shipping.

uOpt

11-17-2005, 11:47 AM

Ordered a 146 retail from Zipzoomfly on Monday, arrived today.

CABYE 0540 FPAW

Results might have to wait until the weekend.

SAE

11-17-2005, 01:01 PM

Nice to see you back in action SAE :toast:

Thx, more to come ;)

IHS has to come off, maybe that gains me some MHz. :D

Arpus

11-17-2005, 01:11 PM

Higger stable configuration (prime stable one day).

http://img334.imageshack.us/img334/1512/opteronstabilityat29ghz0bm.th.jpg (http://img334.imageshack.us/my.php?image=opteronstabilityat29ghz0bm.jpg)

I can´t rise higger clocks; almost incressing Vcore.
I think that the matter is memory controller........

Dani

11-17-2005, 01:45 PM

SP32M is just a test, dont look at time because I have already shaved few minutes away :D
But this is stable in StressPrime2004 with TT BigTyphoon, room temp around 23ºC
My goal is 3.1GHz 100% stable with AIR :toast:

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/CABYE_146_0540FPBW.JPG

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_Sp2004_3072MHz_1.45V_+19h_AIR.gif

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP32M_3072MHz_1.45V_AIR.gif

narjisse

11-17-2005, 01:52 PM

just received mine from zzf CABYE 0540 FPAW :( batch 0348

just curious, what does newegg shipping now?

Rickster_64

11-17-2005, 01:55 PM

Awesome results, I just installed my Opty 146 over lunch and haven't had time to fulled explore the possibilities. Its priming 2500 right now cause thats all Core Center lets me adjust via windows, lol. 3 hours no errors @ 1.36V. I'm sure it will do 2.9 or more but I'll try for more via the bios tonight. By the way I will be posting screenies but my core was within like 20 of yours in the assembly plant ;-). That bodes good news fo rme!

Eagleclaw

11-17-2005, 02:02 PM

Got mine Wednesday same stepping.

2.8 on stock voltage 18+ hours SP2004 stable. I can go to 2.95 but my temps get over 50c and I don't like that.

Good luck with yours I am sure it will do great.

Ordered a 146 retail from Zipzoomfly on Monday, arrived today.

CABYE 0540 FPAW

Results might have to wait until the weekend.

Kameleon

11-17-2005, 02:11 PM

Just swapped the 144 out for 146 (CABYE 0540 FPMW), it's happily priming away at 2.9GHz now. To the big 3.0! :D

freestylercs

11-17-2005, 02:20 PM

at weakend ill get 2 148er 0540 FPBW and 1 146er 0540 FPMW.

free

TEDY

11-17-2005, 02:30 PM

free where?

BadlyDrawnBoy

11-17-2005, 02:40 PM

I received a 146 CABYE 0540 FPMW retail from monarch, back when they were $155. It'll be a week or so until i can use it though. I can't wait to see how it does.

phadeout

11-17-2005, 03:17 PM

free where?

LMAO, his name in short is "free" :slap:

Or you already know that and then you can :slap: me...

kakaroto

11-17-2005, 04:14 PM

Another try, now 2h complete :D My load is dropped suddenly from 55C > 51C :woot:

http://xtremesystems.org/forums/attachment.php?attachmentid=39994&stc=1

http://xtremesystems.org/forums/attachment.php?attachmentid=39993&stc=1

Not bad for 50C load isn't it?

Digg

11-17-2005, 04:38 PM

http://mitglied.lycos.de/meinnamegehtnicht/144er%20Opteron/3000%201.65v%20pi32m.JPG

tested on abit an8 ultra with tt sonic tower.

dinos22

11-17-2005, 04:52 PM

LMAO, his name in short is "free" :slap:

Or you already know that and then you can :slap: me...
:lol: :slap:

5-Clicks

11-17-2005, 09:55 PM

my 146 arrives from ZZF tomorrow. results coming ;)

btw, my 0536GPMW that i just sold to RyderOCZ got 2.9ghz @ 1.65v.

NYCTeeN82

11-18-2005, 01:01 AM

just received mine from zzf CABYE 0540 FPAW :( batch 0348

just curious, what does newegg shipping now?

On monday I ordered a 148 retail box from Newegg for overnight. Tuesday got a 148 CABYE 0540 FPBW. 100% stable at 3003mhz with 1.46V so far. I'm pretty sure they still have the same chips in stock, I would recommend jumping on it.

ncsa

11-18-2005, 01:11 AM

Ok a quick update ... :D

http://img296.imageshack.us/img296/4528/34test32pi0ov.th.jpg (http://img296.imageshack.us/my.php?image=34test32pi0ov.jpg)

http://img296.imageshack.us/img296/1958/34testaqm3d7xx.th.jpg (http://img296.imageshack.us/my.php?image=34testaqm3d7xx.jpg)

Not to bad for 6600GTs ....

Still working on things .. timings not so hot at this stage .. but getting through by sheer CPU speed...

Pt1t

11-18-2005, 04:04 AM

146 CABYE 0540 FPBW

Watercooling rad outside (-+6°) :D

http://users.skynet.be/pt1t/146/cpumark_432.PNG

http://users.skynet.be/pt1t/146/3224_1m.PNG

Fr3ak

11-18-2005, 04:29 AM

my 146 arrives from ZZF tomorrow. results coming ;)

btw, my 0536GPMW that i just sold to RyderOCZ got 2.9ghz @ 1.65v.

hmm then my 0536GPWM aint that bad. It does 2906Mhz @ 1.55V 32hours prime stable, but it looks like I cant hit 3ghz with it. Tried up to 1.64V without any luck. Load temps with 1.64V were about 52-54C, so I dont really want to
give it any higher voltage ..

SPivX

11-18-2005, 04:31 AM

some more testing here:

http://80.61.226.251/~sp/sp2004/sp2004_300x10.JPG

2 b continued! :banana:

Ozan Baseski

11-18-2005, 05:50 AM

I hope I'd be able to share my thoughts and opinions about my 146 soon. I ordered one for myself. I hope it'll come in a week's time.

freestylercs

11-18-2005, 06:06 AM

Here ist another Opteron 144 0536GPMW 0070er Batch:

with a very good memcontroller. likes my OCZ EBs:

http://mitglied.lycos.de/freestylercs95/hpbimg/0536GPMW@32M.JPG

under prime only 2840MHz@1,52V

free

Kameleon

11-18-2005, 06:26 AM

Just swapped the 144 out for 146 (CABYE 0540 FPMW), it's happily priming away at 2.9GHz now. To the big 3.0! :D

Not to be :( I can't get this thing stable at anything over 2.9 (290x10), I know the board can do more as 317x9 was stable on my 144, but even with 1.65v the CPU seems to have run out of speed.

G4h4o8s6T

11-18-2005, 10:14 AM

Not to be :( I can't get this thing stable at anything over 2.9 (290x10), I know the board can do more as 317x9 was stable on my 144, but even with 1.65v the CPU seems to have run out of speed.

I cant even get anything over 2.8 stable, though in my situation it could be the board. 2.8ghz is 100% at 1.5v but no matter what voltage I use for 2.9ghz its not stable........3ghz will not even boot into windows

Garrett

11-18-2005, 10:46 AM

That's a shame G4h4o8s6T... what stepping have you got?

Dani

11-18-2005, 01:27 PM

Opt 146 0540FPBW and TT BigTyphoon (room temp +23ºC)

- 3100MHz SP1M (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP1M_3102MHz_1.45V_AIR.gif)
- 3080MHz SP8M (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP8M_3080MHz_1.45V_AIR.gif)
- 3080MHz SP32M (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP32M_3080MHz_1.45V_AIR.gif)

Have'nt try over 1.45V yet, mems can do +280FSB 2-2-5-2-7-13 1T too :D

G4h4o8s6T

11-18-2005, 02:15 PM

That's a shame G4h4o8s6T... what stepping have you got?

CABYE 0540FPMW batch 0092........Im still more than happy at 2.8, just others with the same chip are getting 2.9-3ghz on stock voltage :)

Rickster_64

11-18-2005, 02:19 PM

Finally ran my Opty through some testing. I have not tried anything above 1.5V at all, temps where over 55C so I didnt want to damage my jewel ;-). Here is what I have: Also using XP-120 cooler, lapped til copper and AS5. 100cfm fan

CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 7, Stepping: 1
Extended CPUID: Family: F, Model: 27, Stepping: 1
CPUID String: 20F71
Processor APIC: 0
Processor: AMD Opteron 1 (Unknown)
CPU Speed: 2900.05 (290.00 x 10.0)
Revision: SH8-E4
Platform: Socket 940
Startup VCore: 1.400v
Maximum Case Temperature = 61C

CABYE 0540FPBW Ran prime all night with zero errors and 1.42 avg. voltage. tried 1.45V and 2950 but prime failed pretty fast, I will try 1.50-1.55 just to see if it helps, I can setup down in the basement and turn the thermostat up (is 20F in iowa today.) Played games for hours and everything is working awesome, so for daily use, 2.9 is it!

shimmishim

11-18-2005, 03:35 PM

2900 mhz with 1.5 volts prime95 small fft stable for 6+ hours 0540 FPMW

2900 mhz with 1.5 volts prime95 small fft testing so far 2 hours 0540 FPAW

seems like the cabye 0540FP()W ()=A,B,M are consistently hitting 2.9!

wish i could test a FPBW

5-Clicks

11-18-2005, 05:03 PM

my 146 from ZZF just came in today. CABYE 0540FPBW!! :woot: batch number is 04xx something. i'm at a friend's party right now, so testing comes later. :D

dogsx2

11-18-2005, 05:42 PM

I just got mine today from ZZF and it's a 0540FPAW, batch#504??

I wasn't very happy :( but threw it in at 300x10@1.45 and it went right into windows. Bumped it up to 1.47 and benched it for about an hour.

http://img509.imageshack.us/my.php?image=fpaw30prime2ef.jpg

http://img509.imageshack.us/my.php?image=fpaw30007jx.jpg

Better then I thought. :D

MaxxxRacer

11-18-2005, 05:45 PM

Batch Number Doesnt Mean Crap!!!!

tatts

11-18-2005, 05:48 PM

i got a small problem, not sure if its my board or the cpu's mem controller.
i can bench my 146 @ 3.2ghz no problem 1.625V but running occt or sp2004 @ 10x310 1.625V fails within 2 minutes yet occt finishes np @ 10x309 1.55V WTF?

edit: just ran occt @ 9x345 (3.107ghz) 1.6V 140 ram divider passed no problem, put ram divider upto 150 (258mhz) & fails straight away again and i know its not the ram as it runs 280mhz 6-3-3-2.5 and its only on 8-4-4-2.5 atm

another update:
just passed occt @ 10x310 1.6V using a 150 ram divider (221mhz) :toast:
it looks like as soon as the ram goes over 250mhz when clocked to 3ghz+ it fails, guess ive solved the problem, now to keep clocking :banana: :banana: :banana:

aMp

11-18-2005, 08:31 PM

Got this in the mail tonight from Tankguys:

Good Evening!

We got our shipment of 146's tonight, and we have checked the steppings on all of them. Based on your spot in line, you have been given a CAB2E 0540 FPMW.

If you decide that you do not want this stepping or you wish to cancel your order for any other reason, you must let us know before Sunday night. Otherwise, this will be going out on Monday, and we'll forward you a tracking number as soon as we ship!

First off, how sweet is that, giving you an option to cancel once you know the stepping? Kudos to TG.

But you knew I was getting to this: Whaddaya think? Keep her, or toss her back?

ncsa

11-18-2005, 08:37 PM

@tatts ... I have also noticed a similar situation .. that at lower speeds the Mem can run up much higher but start getting over 3.1 and the controller seems to struggle...

even dropping the multi did not help ... I know this MB is good for up to 400-405 as the 3000+ Venice liked 375x8, and this 146 @ 395x9 was ok in Memtest.

What BIOS are you running? I have tried the new FX60Test beta but just could not get it to be stable .. have gone back to 623-2 as I found 704-2BTA was not a good fit on this MB. Maybe try 510-2FIX?

xenolith

11-18-2005, 09:08 PM

Got this in the mail tonight from Tankguys:

First off, how sweet is that, giving you an option to cancel once you know the stepping? Kudos to TG.

But you knew I was getting to this: Whaddaya think? Keep her, or toss her back?

I vote that you keep it. The couple people I've seen here with a 146 CAB2E 0540 are reporting 3Ghz/1.5v SPI 32MB stable .

AgentVX

11-18-2005, 09:09 PM

Got this in the mail tonight from Tankguys:

First off, how sweet is that, giving you an option to cancel once you know the stepping? Kudos to TG.

But you knew I was getting to this: Whaddaya think? Keep her, or toss her back?

Yeah, nice of them. I say take it. We've got a few from that batch here in Aus, and all have hit 3GHz with around 1.5V give or take.
kakaroto too: http://www.xtremesystems.org/forums/showthread.php?p=1141924#post1141924

5days

11-18-2005, 09:44 PM

Got this in the mail tonight from Tankguys:

First off, how sweet is that, giving you an option to cancel once you know the stepping? Kudos to TG.

But you knew I was getting to this: Whaddaya think? Keep her, or toss her back?
Keep it!

Mines doing 2.92GHz (6 Hours Prime Stable) on stock volts and AIR! :slobber:

After a burn in I hope for around 3.0GHz stock volts and air. :D

aMp

11-18-2005, 10:26 PM

Sounds good, thanks guys. I wonder why such a difference between the 146s and 144s?

Tamille

11-18-2005, 11:28 PM

CABYE 0536 Opteron 148
1.68v in bios 3057mhz air cooled 133 divider.

http://img504.imageshack.us/img504/9863/30579dq.jpg (http://imageshack.us)

5days

11-18-2005, 11:33 PM

CABYE 0536 Opteron 148
1.68v in bios 3057mhz air cooled 133 divider.
Get some better RAM that time is crap. :p:

I get a better time @ 2.92GHz while using MSN/Firefox/Photoshop/Winamp. :stick:

Tamille

11-18-2005, 11:44 PM

Get some better RAM that time is crap. :p:

I get a better time @ 2.92GHz while using MSN/Firefox/Photoshop/Winamp. :stick:
Just doing some air testing on 1 of my new 2GB G.SKILL kits all setting at aoto.
my best time so far is 24.17

http://img508.imageshack.us/img508/244/32m24178fa.th.jpg (http://img508.imageshack.us/my.php?image=32m24178fa.jpg)

sponge bob

11-19-2005, 04:44 AM

http://sponge.ez.pri.ee/data/media/3/26750.JPG little 1m run with my very crappy opteron, 1,45v 2,7 ghz stable :S

tatts

11-19-2005, 04:56 AM

OgreX

11-19-2005, 05:45 AM

what's the story with removing the IHS lately?
my cabye 0540fpwm seems to need 1.55v to be game-stable @3ghz..(was prime/occt stable at 1.47v... so much for that.)
gets up around 52c+ under load.. 35-36c idle with my watercooling and as5..
I'm thinking RBX + ihs removed would be much better contact..(rbx doesn't cover the whole ihs).. should I try it?
still have a 0536 that does 2.8 laying here so not too worried about killing another(r.i.p 2.4c) cpu with a razorblade.. atm

pancake

11-19-2005, 06:54 AM

yea try it. ive just stuck my watercooling back on my rig. getting between 30-33c idle 42c load on my 146 @ 3g 1.49v ( in windows)

gplracer

11-19-2005, 07:04 AM

Where are you guys getting these cpus? I looked on newegg and they only had opteron 148's. Thanks!

tatts

11-19-2005, 07:05 AM

after finding out the mem controller was holding me back, currently on 3.1ghz 1.55V :toast:

http://img516.imageshack.us/img516/9750/10x310occt2fp.th.jpg (http://img516.imageshack.us/my.php?image=10x310occt2fp.jpg)

http://img516.imageshack.us/img516/5098/2005111914h52voltcore8mk.th.gif (http://img516.imageshack.us/my.php?image=2005111914h52voltcore8mk.gif) http://img516.imageshack.us/img516/6185/2005111914h52cpugraph6ch.th.gif (http://img516.imageshack.us/my.php?image=2005111914h52cpugraph6ch.gif)

pancake

11-19-2005, 07:22 AM

tatts

11-19-2005, 07:55 AM

swiftech storm, swiftech mcw655, Swiftech MCR220-QP Dual 120mm, DD maze4
thinking of removing the ihs later to drop temps abit more :D

pancake

11-19-2005, 08:06 AM

thats some nice temps you get with that swiftech storm , i may have to get one and replace my mcw6002

test @ 3g 1.49v

http://img505.imageshack.us/img505/1623/2005111916h02cpugraph0hh.gif

http://img505.imageshack.us/img505/3429/2005111916h02voltcore2oc.gif

Monge

11-19-2005, 08:35 AM

after finding out the mem controller was holding me back, currently on 3.1ghz 1.55V :toast:

Very nice tatts :)
Out of curiosity, what exactly did the trick?
Very nice CPU temp and the vcore rock stable too.
Do you use a Hyper 580w PSU?

Monge :toast:

KenRico

11-19-2005, 09:51 AM

Where are you guys getting these cpus? I looked on newegg and they only had opteron 148's. Thanks!

Got mine from local shop... www.chipsandmemory.com
CABYE 0540 FPAW

Call or email to arrange! :YIPPIE:

tatts

11-19-2005, 10:11 AM

thanks :D
yep, using the hiper type r 580w :D
the mem controller is struggling when it gets to 3.1ghz+ so have to keep ram close to 200mhz to get it stable, more mhz on the cpu is better than mhz on the ram tho :D
struggling again @ 3.2ghz, can bench it & play COD2 with 1.6V but occt isnt playing ball, will have to play with ram more :(

elected

11-19-2005, 11:03 AM

Well this isn't anything you haven't seen already. 146 CABYE 0540 @ 2800 1.392vcore (http://www.student.oulu.fi/~klepikko/pc/opteron.JPG). Stupid me - didn't write down the whole stepping :slapass: Can't remember anymore which one it was: FPBW or FPMW :rolleyes: I'm going a bit slower because it's my first A64 rig and only had it since monday.

The best part is that the cpu was on some kind of special offer in alternate. I got it with only 149€ (boxed) :D Now it has gone up to 164€ but none in stock. How can you beat that? :cool:

Bamboo

11-19-2005, 12:22 PM

Finally got time to tune my Opty 146 CABYE 0540FPMW, received Thursday from Monarch.

Did stuggling to get it SuperPI32M stable, and found out it is the memory, that giving headache, CPU by itself is very good actually.

First tried the Geil One SE 2x512MB TCCD, interesting thing is, if set Row Cycle Time (Trc) to 9 passed the PI 32M, but will fail if at 7.
http://members.shaw.ca/tsopin/111951.jpg

Then tried G.Skill 1GBGH. Worked out fine at DDR 504, 2-2-2-3, at DDR544, 2-2-2-5, ok for PI 1M, but no further, need time for tuning.
http://members.shaw.ca/tsopin/111952.jpg

Glad to have this baby on hand, as part of my clooection, sit aside with the Venice 0517EPMW. The collection will keep growing......

DId tried 10x310 at 1.55V, but at that time, did not tune memory's setting well, may be it will work if I set the Trc to 9, just thinking..... :p:

Dani

11-19-2005, 12:45 PM

Heh, no maxed yet, just broken 3.1GHz barrier with AIR cooling (room temp on 23ºC) :D

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP8M_3103MHz_4m52s_1.48s_AIR.gif

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP32M_3103MHz_23m22s_1.48V_AIR.gif

Poki

11-19-2005, 12:59 PM

/ontopic/
Post update: I did get 3GHz stable on my 146 in sig :cool: It will go higher i'm sure.

/kindaofftopic/

thats some nice temps you get with that swiftech storm , i may have to get one and replace my mcw6002

test @ 3g 1.49v

http://img505.imageshack.us/img505/1623/2005111916h02cpugraph0hh.gif

http://img505.imageshack.us/img505/3429/2005111916h02voltcore2oc.gif

Pancake here's my 146 doing 3000 with 1.60v (21c ambient) using what most would consider an inferior waterblock by todays standards the dangerden maze3.
What makes it work well is the radiator(chevy truck engine radiator) and pump(littlegiant 475) and a 22" boxfan on the radiator.
As you can see there is no heatsoak in my watersystem and tight 8.5 degree delta between the idle and load temps.
I think most of you guys have good blocks but the heatexchangers (rads) aren't performing that well. Most of the commercial computer radiators and
automotive heatercores are the two pass design which don't let the water slow down enough to remove the heat.
Example: inlet is one end tank where the water flows to the opposite end then returns to the other side where the outlet is beside the inlet tank.
I think the biggest improvent would be to find a radiator that has the inlet and outlet on the opposite ends of the heatexchanger rows or run higher CFM fans on the radiator.
Just my :2cents:

pancake

11-19-2005, 01:29 PM

/ontopic/
Post update: I did get 3GHz stable on my 146 in sig :cool: It will go higher i'm sure.

/kindaofftopic/

Pancake here's my 146 doing 3000 with 1.60v (21c ambient) using what most would consider an inferior waterblock by todays standards the dangerden maze3.
What makes it work well is the radiator(chevy truck engine radiator) and pump(littlegiant 475) and a 22" boxfan on the radiator.
As you can see there is no heatsoak in my watersystem and tight 8.5 degree delta between the idle and load temps.
I think most of you guys have good blocks but the heatexchangers (rads) aren't performing that well. Most of the commercial computer radiators and
automotive heatercores are the two pass design which don't let the water slow down enough to remove the heat.
Example: inlet is one end tank where the water flows to the opposite end then returns to the other side where the outlet is beside the inlet tank.
I think the biggest improvent would be to find a radiator that has the inlet and outlet on the opposite ends of the heatexchanger rows or run higher CFM fans on the radiator.
Just my :2cents:

yea youre absolutely correct. im using a dual 2 x 120mm rad that came with a asetek antarctica kit , black ice rad , it only had 1/4" barbs on when i got it but i swapped it out for 1/2" ones but the thread is still 1/4" so thatll be the restriction , and im using the crap asetek res to with inlet and out at a 45 degree angle to one another. gonna get my ass down the hardware store and get me T connector to make a t line tomorow hopefully. and have to buy a new rad as i managed to melt the top off my heatercore with a blowtorch lol :slapass:

Zac89

11-19-2005, 01:35 PM

Hi!
Here's my new CABYE 0540 FPBW.
Stock cooler. Ambient temp is too high!! And in full load it reaches about 56/58 °C.
So I've tested it only @ 1.36 (windows reading).

Max Prime stable:
http://img506.imageshack.us/img506/2107/prime27854bv.th.png (http://img506.imageshack.us/my.php?image=prime27854bv.png)

Max 32m stable:
http://img219.imageshack.us/img219/8965/32m28004gu.th.png (http://img219.imageshack.us/my.php?image=32m28004gu.png)

Max 1m stable:
http://img219.imageshack.us/img219/845/1m28531oz.th.png (http://img219.imageshack.us/my.php?image=1m28531oz.png)

It's not the best, but definitely it's not bad!!
Waiting for liquid cooling..... ;)

pancake

11-19-2005, 02:01 PM

pushed it a bit more , upto 3.1. just bumped the vcore upto a reasonable amount so i can keep pushing not keep going back and forth to bios.
i set ram timings loose so they wont be a problem

http://img514.imageshack.us/img514/5494/319ya.jpg

NYCTeeN82

11-19-2005, 02:11 PM

What BIOs are you guys using for your TCCD memory on the DFI LP NF4 SLI-D??? I have the SLI-DR, but it's the same bios for either board.

tatts

11-19-2005, 02:28 PM

has anyone else got occt stable @ 3.1ghz+?

uOpt

11-19-2005, 02:54 PM

What BIOs are you guys using for your TCCD memory on the DFI LP NF4 SLI-D??? I have the SLI-DR, but it's the same bios for either board.

623-3 on SLI-DR, Geil One TCCD single-sided at 345 MHz.

ixtapalapaquetl

11-19-2005, 03:45 PM

EXPERT + CABNE + AIR = LOVE.

http://img355.imageshack.us/img355/5733/148319spi1m1uf.png (http://imageshack.us)

@ tatts:

http://img355.imageshack.us/img355/4458/2005111915h55voltcore8mk.gif (http://imageshack.us)

Load temps at 40C. Wouldn't run these voltages 24/7, but it sure is fun right now. Going to try to prime at about 3125 or so.

Rufus7

11-19-2005, 03:59 PM

Than try Prime at 3125Mhz your Loadtemps on Air are Ok by this Frequency.
But your Vcore is very high!
Never the less nice CPU.

And thats my new 170 CCBWE 0536MPMW 086 Batch under Dual Prime

http://img26.imageshack.us/img26/8759/15hdualprime25g1312vc2vo.th.jpg (http://img26.imageshack.us/my.php?image=15hdualprime25g1312vc2vo.jpg)

NYCTeeN82

11-19-2005, 06:43 PM

623-3 on SLI-DR, Geil One TCCD single-sided at 345 MHz.

Yea I have 623-3 but I can't run my OCZ EL Platinum Rev. 2 @ 274HTT. People are doing 2.5-4-3-7 3.0V @ 300HTT with this memory, I can't do the same timings @ 274HTT. Even 3-4-4-8 does not work out! Uh I am confused.....

Big Al

11-19-2005, 10:26 PM

Jupiler

11-19-2005, 11:14 PM

I just got my CAB2E 0540FPMW 144 from Dream Hardware and I noticed that it already has thermal paste on it. Has anyone had good OC results using the stock paste or should I clean it off and use Artic Silver?? The paste looks pretty thick to me. I'm getting my motherboard on tuesday and just looking for some opinions. I'm going to try the stock heatsink first and see what kind of results I can get.

If it has thermal paste on it, and it is a boxed version you bought, then the cpu has already been used, and probably returned for some obscure reason (bad clocker??).
Even if it is a tray version you bought, the cpu should be clean wihout any traces of themal paste.

And, Welcome to XS. :welcome:

alpha0ne

11-19-2005, 11:16 PM

I think :confused: he is talking about the HSF :rolleyes: :)

Jupiler

11-19-2005, 11:25 PM

I think :confused: he is talking about the HSF :rolleyes: :)

Yeah, you might be right. Although you never know.

freestylercs

11-20-2005, 04:47 AM

So, here is one of my two 148 0540 FPBW.

0280er Batch

http://mitglied.lycos.de/freestylercs95/hpbimg/148@3000MHz@1,39V_2%20280er.JPG

http://mitglied.lycos.de/freestylercs95/hpbimg/148@3130MHz@1,55V%20280er.JPG

free

dogsx2

11-20-2005, 05:03 AM

I just got my CAB2E 0540FPMW 144 from Dream Hardware and I noticed that it already has thermal paste on it. Has anyone had good OC results using the stock paste or should I clean it off and use Artic Silver?? The paste looks pretty thick to me. I'm getting my motherboard on tuesday and just looking for some opinions. I'm going to try the stock heatsink first and see what kind of results I can get.

Welcome to XS and the joy of oc'ing an opty. :welcome:

LOL, the hs comes with the thermal paste on it, just clean it off and use as5, a little dab will do you.

kakaroto

11-20-2005, 05:03 AM

Sjees free, that is a fine opteron you have.
Your load temp is soo great though, 38-40C. What is your ambient/room temp?

GUFY

11-20-2005, 05:55 AM

http://slike.slo-tech.com/16020.jpg

Opteron 146 not stable, just fast Super Pi 1M run. :D :D

freestylercs

11-20-2005, 06:24 AM

Sjees free, that is a fine opteron you have.
Your load temp is soo great though, 38-40C. What is your ambient/room temp?

20 °C

the heatspreader is very good at this 148er

free

TEDY

11-20-2005, 07:01 AM

Can everyone who got OPTERON 146 from www.komplett.se lately, let say from 1 week before what steppings did you get ? Thanks.

Big Al

11-20-2005, 07:49 AM

Welcome to XS and the joy of oc'ing an opty. :welcome:

LOL, the hs comes with the thermal paste on it, just clean it off and use as5, a little dab will do you.

Thanks!

Thats what I was wondering.

And yea, I was talking about the thermal paste on the hs.

Awesome forum guys. Keep up the good work.

coop

11-20-2005, 08:10 AM

@GUFY, very nice!! On water I assume? What temps-(cold water?), and what stepping on that? Nice ram too.

GUFY

11-20-2005, 08:25 AM

@coop wather temp 4 C and Steping is 0540 FPBW. :D

ncsa

11-20-2005, 08:56 AM

Finally after 4 power outages today :( .. got this Primed up

http://img408.imageshack.us/img408/3074/340x1017vprime958hrsta2gh.th.jpg (http://img408.imageshack.us/my.php?image=340x1017vprime958hrsta2gh.jpg)

coop

11-20-2005, 09:07 AM

Thanks GUFY, @ncsa, that looks great - is that with 623-2 ?

cyr

11-20-2005, 09:11 AM

Can everyone who got OPTERON 146 from www.komplett.se lately, let say from 1 week before what steppings did you get ? Thanks.

I got two CABYE 0540FPMW from komplett.se this week...

ncsa

11-20-2005, 09:15 AM

Thanks GUFY, @ncsa, that looks great - is that with 623-2 ?

Thanks, Yes 623-2 but with GeIL ONE TCCD not the BH on this .... still working on how to max the Mem Mhz but at least I know the chip is good - better than expected.

Lastviking

11-20-2005, 09:23 AM

Can everyone who got OPTERON 146 from www.komplett.se lately, let say from 1 week before what steppings did you get ? Thanks.

Most was 0540 fpmw some was fpaw. No anothers.

gundamit

11-20-2005, 09:50 AM

I haven't had a chance to play with my Opty 146 CABNE 0530APMW in almost two weeks. Trying to sneak in a few minutes this morning.

Last I left it I had it 32M stable at 3.46ghz but any higher and it crapped out. I thought it might be my Twinmos SP UTT holding things up and sure enough when I dropped a bigger divider on it, I was finally able to meet my goal. I was reluctant to use the 140 divider because the bios has a hard time reporting the correct memory speed. I believe the actual memory speed is around 245 although CPU-Z picked it up as 350. :p: Everest seems to know whats up.

My goal for this CPU when I first started playing with it was 3.5ghz. Finally made it! :toast: :woot:

http://img320.imageshack.us/img320/8193/350x10sp32m4hx.png

TEDY

11-20-2005, 10:03 AM

Most was 0540 fpmw some was fpaw. No anothers.

so no FPBW's ? :(

k0nsl

11-20-2005, 10:10 AM

Mine was a CABYE 0540FPMW ;)

-k0nsl

Can everyone who got OPTERON 146 from www.komplett.se lately, let say from 1 week before what steppings did you get ? Thanks.

dogsx2

11-20-2005, 10:11 AM

:woot: :woot: :woot: Great job by a very good(almost to great) oc'er.

Missed your post, hoped you hadn't died or something. :D I'm sure it will go higher with a little massaging. :thumbsup:

Raven.exe

11-20-2005, 10:12 AM

i got an FPBW from tankguys but now they're out of stock..and chances are they'll get CAB2E's in teh next shipment.

gundamit

11-20-2005, 10:18 AM

:woot: :woot: :woot: Great job by a very good(almost to great) oc'er.

Missed your post, hoped you hadn't died or something. :D I'm sure it will go higher with a little massaging. :thumbsup: Thanks. But I think I might be done with that one. I need to start testing on another Opty 146 CABNE 0530APMW. I'll start with some air sometime during the next couple of days.

coop

11-20-2005, 10:25 AM

@Gundamit, that does it - mine coming out of the box today. If I can get into the 21's that is better than the SD I have now. I notice the Dynamic Idle Cycle Counter is disabled. Iirc I read something about this with these cpu. Does it need to be disabled for certain reasons or absolutly for oc. thanks.

TEDY

11-20-2005, 10:42 AM

Mine was a CABYE 0540FPMW ;)

-k0nsl

ordered when ?

gundamit

11-20-2005, 10:49 AM

Dynamic Idle Cycle Counter is disabled. Iirc I read something about this with these cpu. Does it need to be disabled for certain reasons or absolutly for oc. thanks. Lol. You're asking Mr.Short Term Memory! I can't recall, thats why I keep all my old screenies so I can remind myself of the memory settings. It may be that its just the default setting and I never tried it another way. :confused:

Jupiler

11-20-2005, 11:14 AM

So, here is one of my two 148 0540 FPBW.

0280er Batch

free

Awesome cpu, free. Very good temps too. :toast:
Once again, you'll always able to get the good ones.
Next time, you can pick mine. :D

Lastviking

11-20-2005, 11:45 AM

so no FPBW's ? :(

Nope only fpmw and fpaw, but i got 2 hand picked fpbw from datorbutiken.com. But the dont have anymore now. I have only seen 3 fpbw in sweden.2 of them are mine(one bad and one good but no gold ex)

tatts

11-20-2005, 11:58 AM

has anyone got any clocks for a 146 cab2e plz??

TEDY

11-20-2005, 12:17 PM

Nope only fpmw and fpaw, but i got 2 hand picked fpbw from datorbutiken.com. But the dont have anymore now. I have only seen 3 fpbw in sweden.2 of them are mine(one bad and one good but no gold ex)

i won't complain when i get them :toast:

freestylercs

11-20-2005, 12:45 PM

has anyone got any clocks for a 146 cab2e plz??

have got an CAB2E 146 0540FPMW 0167er Batch

3000MHz@1,45V
>1,5V its really too hot with heatspreader.

1M goes up to 3150@1,6V

free

Garrett

11-20-2005, 02:09 PM

CAB2E 0540 FPMW 1.6v 3.1ghz 24/7 on Watercooling
Max temp while gaming/stressing etc. 48c
Prime stable? Don't know, prime sux :p:

Zac89

11-20-2005, 02:11 PM

Anyone has already tested a CAB2E 0542 ??
I've found a 144 with that stepping.... is it a good clocker? :)

tatts

11-20-2005, 02:34 PM

cheers garrett & free
i will have one on tuesday and hoping its mem controller will be better than my cabye

rastaseb

11-20-2005, 02:38 PM

Opty 150 at 2.92 at 1.55 24/7...it's the second one wich is worth than my first : 3.1 at 1.6 24/7 and suicide screen at 3.3

Dani

11-20-2005, 03:28 PM

146 0540FPBW TT BigTyphoon, room temp 23ºC

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_SP8M_3125MHz_4m48s_1.5V_AIR.gif

Lastviking

11-20-2005, 03:43 PM

146 0540FPBW TT BigTyphoon, room temp 23ºC

You got the best 146 chip in world Dani, gratz. Maybe it will do 3.9-4.0+ :slobber: on cascade if it dont have to big cold bug.

rodman

11-20-2005, 03:47 PM

Is anyone geting over 2.8GHZ using 2x1GB stix?

shimmishim

11-20-2005, 03:49 PM

Is anyone geting over 2.8GHZ using 2x1GB stix?

yes.

i am running 10 x 300 with 2x1 gig crucial ballstix but since i haven't testing 300 htt 1:1 i am using the 9:10 divider.

Dani

11-20-2005, 03:52 PM

You got the best 146 chip in world Dani, gratz. Maybe it will do 3.9-4.0+ :slobber: on cascade if it dont have to big cold bug.
Thanks Lastviking :toast:
As you know we got soon winter up here in scandinavia, gonna do some personal records with AIR, hopefull some AIR WR too :rolleyes:

Eagleclaw

11-20-2005, 04:52 PM

I got sick of resetting the bios trying to get this ram to run faster.

I could do 10x250 1:1 but nothing higher (maybe 260 1:1 I forget)

I am now running 10x280 with ram at 234mhz. I was thinking it might be my MB but who knows. Maybe later this week I will mess around some more.

Is anyone geting over 2.8GHZ using 2x1GB stix?

daysleeper

11-20-2005, 04:52 PM

Well when i look out the window there is allready Winter!!!! :rolleyes: ....And Dani when you sell your Opteron,don't keep it inside your team :D

dogsx2

11-20-2005, 05:18 PM

[QUOTE=Dani]146 0540FPBW TT BigTyphoon, room temp 23ºC

You got a good cpu. Why don't you use spi mod 1.4?

ncsa

11-20-2005, 06:20 PM

I do not think that you are alone .. it maybe that the FPAW chips are experiencing this issue of > 260-265 - no boot.

I got sick of resetting the bios trying to get this ram to run faster.

I could do 10x250 1:1 but nothing higher (maybe 260 1:1 I forget)

I am now running 10x280 with ram at 234mhz. I was thinking it might be my MB but who knows. Maybe later this week I will mess around some more.

dogsx2

11-20-2005, 07:04 PM

I do not think that you are alone .. it maybe that the FPAW chips are experiencing this issue of > 260-265 - no boot.

:confused:

coop

11-20-2005, 07:38 PM

I had to raise volt a bit for 3.0ghz. It seems to work better with certain '%' of VID. Still it is less than I needed with SD. This is with 1.325 x 113 (1.497v) 0540 fpmw http://img516.imageshack.us/img516/7703/op32m3k3vd.jpg (http://imageshack.us) linky to 1.441v bios http://img316.imageshack.us/img316/4896/op32m24472900139v6ly.jpg

dnottis

11-20-2005, 08:36 PM

Is anyone geting over 2.8GHZ using 2x1GB stix?

http://www.3dxtreme.net/other/CPUS/Opteron%20146%200540FPAW/2920-1.55v-12hrprime.jpg

dnottis

11-20-2005, 08:37 PM

I do not think that you are alone .. it maybe that the FPAW chips are experiencing this issue of > 260-265 - no boot.

No problem with with 146 FPAW.

http://www.xtremesystems.org/forums/showthread.php?p=1147379#post1147379

uOpt

11-20-2005, 09:09 PM

My 146 CABYE 0540 FPAW @ 1.6 V, 2x 512 MB Geil One BH @ 3.6 V.

On air, Big Typhoon:

(ETA: these shots are SuperPi 1M only. I didn't have time to Prime at higher than sock volts yet)

http://www.cons.org/cracauer/oc-screens/oc-cabye-16v-bh5-36v-superpi1m_8.png

%%

For the kicks of it, here is with 4 sticks of the Geil One BH. Might be the fastest superpi on air with 2 GB memory.

http://www.cons.org/cracauer/oc-screens/oc-cabye-16v-bh5-36v-superpi1m_4sticks_1.png

%%

Geil One TCCD
http://www.cons.org/cracauer/oc-screens/oc-cabye-16v-superpi1m_4.png

%%

Here is Geil One TCCD maxed out. CPU not high, but sure has a good memory controller:
http://www.cons.org/cracauer/oc-screens/oc-tccd340.png

dnottis

11-20-2005, 10:39 PM

That prime stable though? I can push 3 Ghz too SuperPI32M stable - but prime crashes right away.

http://www.3dxtreme.net/other/CPUS/Opteron%20146%200540FPAW/3000-superpi.jpg

Riverna

11-21-2005, 01:44 AM

Hello Guys,

here is my opteron 144 apmw 0530, without heatspreader and cooled my water (tripple radi and nexxxos xp rev 2.0).

http://www.forumdeluxx.de/gallery/data/500/8886APMW05302870S24.JPG
http://www.forumdeluxx.de/gallery/data/500/88862870OCCT.JPG
http://www.forumdeluxx.de/gallery/data/500/88862535SuperPI.JPG

With lower temp ... over 36°c and he is instable :(
http://www.forumdeluxx.de/gallery/data/500/8886APMW05302930.JPG
http://www.forumdeluxx.de/gallery/data/500/8886apmw.jpg

Gamestable and benchstable @ 3060Mhz with 1.39v :stick:

Dani

11-21-2005, 02:14 AM

Ok, finally got 3.1GHz stable on AIR :cool:

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_Sp2004_3103MHz_1.5V_+11h_AIR.gif

Dani

11-21-2005, 02:17 AM

You got a good cpu. Why don't you use spi mod 1.4?
MuroPI v1.1 is same as spi mod 1.4, it's just translated to Finnish language

Dani

11-21-2005, 02:19 AM

Well when i look out the window there is allready Winter!!!! :rolleyes: ....And Dani when you sell your Opteron,don't keep it inside your team :D
Here down in Helsinki near warm sea it is'nt winter, yet :(
But hmm, do you want to buy it when im ready to leave my Opt? :D

tatts

11-21-2005, 05:34 AM

i couldnt resist, a uk retailor got some 146's in today so i got 2 more coming, hoping theyve got better mem controllers so i can pass 3.1ghz stable :D

TEDY

11-21-2005, 05:37 AM

geeze tatts : leave some for us :)

tatts

11-21-2005, 05:44 AM

youre not in the uk anyway and dont think they ship abroad :(
i got an addiction now, even though my 144's have gone, still leaves 3 146's & a 148 lol

TEDY

11-21-2005, 05:50 AM

and with a lot of € ;)

send me 1.

uOpt

11-21-2005, 05:57 AM

That prime stable though? I can push 3 Ghz too SuperPI32M stable - but prime crashes right away.

No, my shots are Pi 1 M only.

My CAYE does 2800 MHz 12 hours Prime stable at stock volts.

I didn't have time to prime at higher volts yet :(

Family man 72

11-21-2005, 06:17 AM

Is anyone geting over 2.8GHZ using 2x1GB stix?
My 148 CABYE 0535XPMW stops like a wall at 2805MHz (11x255) with Ocz 2GB EB 4000 kit. Tried to raise Vcore to 1.65V,but Prime fails after 3 hours. :(

TEDY

11-21-2005, 06:26 AM

muhahaha

soon as tatts said that techohead.uk had 146 opty price raised in 30 minutes for 30Ł

it was 125 now 151

damn greedy :banana::banana::banana::banana:ing retailers.

tatts

11-21-2005, 06:33 AM

haha someone just ordered 1 for £150 plus delivery (£160) and only 1 left pmsl

TEDY

11-21-2005, 06:37 AM

some people really have money :)

tatts

11-21-2005, 06:39 AM

i ordered 2 this morning soon as they was added so got mine cheap and i knew no one else in the uk will be getting any before xmas :banana:

TEDY

11-21-2005, 07:01 AM

so 3 + 1 you already have + 2 ordered ? come on man send me 1 ;)

Rufus7

11-21-2005, 07:09 AM

Ok, finally got 3.1GHz stable on AIR :cool:

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/Opteron%20146/146_0540FPBW_Sp2004_3103MHz_1.5V_+11h_AIR.gif

Sorry but SP2004 is not the best Stabilitytest.
If you want to go sure then use Prime95 version 24.14!
And make the Test Custom FFTS in place changing every 15 Minutes. (8-4096).
Thats the ultimative Stabilitytest for the CPU!!!!!!!!

tatts

11-21-2005, 07:11 AM

Sorry but SP2004 is not the best Stabilitytest.

can you tell me the differences between prime95 & sp2004 please? :stick:

Rufus7

11-21-2005, 07:20 AM

The SP2004 is the Old version of Prime 95 Versions before 24.xx.
And these versions are not optimized to set the new CPUs under 100%Load.
Prime Versions higher than 24.11 are better for Stability Test.
Try it and you will see. Same Frequency and Vcore and than let SP2004 run. After an Hour try it with Prime 24.14 Custom FFTS in Place . And the CPU will soon give up.

[url=http://www.bilder-hosting.de]http://www.bilder-hosting.de/uploads/8b98eedc9a.jpg[/url

5days

11-21-2005, 07:25 AM

can you tell me the differences between prime95 & sp2004 please? :stick:
Nothing except for maybe versions. :slap:

Rufus7

11-21-2005, 07:49 AM

SP2004 is like SuperPi.Says nohting about Stability.
If you dont believe it test it out with SP2004 an Prime95 24.14.
Set a Vcore an Frequency thats Stable under SP2004 und then let Prime95 24.14 Custom
FFTs in place changing every 15 Minutes run. And you will fail in the first minutes or seconds. And thats the Truth.

Or Try it with RC5-72 or Setihome.

Zeus

11-21-2005, 08:46 AM

Isn't SP2004 just StressPrime?
I think the difference is just the skin, underneath it's just Prime95 but it might be an older version.

Rufus7

11-21-2005, 09:08 AM

Yeah a very old Version. It does not Stress really the new A64 CPUs.

Dani

11-21-2005, 09:20 AM

tatts

11-21-2005, 09:27 AM

Isn't SP2004 just StressPrime?
I think the difference is just the skin, underneath it's just Prime95 but it might be an older version.
just what i thought

Mr.President

11-21-2005, 10:20 AM

so in a few minutes my new 0540 FPBW arrives. Perhaps i can beat my personal best 3250 occt with the previous :) all WC

Wiker

11-21-2005, 12:16 PM

How high do you guys think it is possible to reach with a 146 CABYE FPMW and DFI nf4 lanparty cooling Prometeia MACH II? That´s my new rig. Mach II arrives on sunday and DFI mobo in a week or so

TEDY

11-21-2005, 01:44 PM

at least 3.3 ;)

UFgatorSean

11-21-2005, 03:11 PM

If i currently Have an X2 3800 installed, will i need to reinstall windows to play with my new opty, or should it be okay to just swap them out?

TIA

tatts

11-21-2005, 03:12 PM

if its only a cpu swap then youll have no problems ;)

UFgatorSean

11-21-2005, 03:34 PM

if its only a cpu swap then youll have no problems ;)

Ya, i was just worried the dual core optimizations/drivers might cause a conflict, but i'll try it out!

I am so excited about my CABYE 0540FPAW! I am hunting for 3.1-3.2 with my shilled setup.

Only question now is to remover the IHS or not before i "de-virginize" it :P

D4nnyOcean

11-21-2005, 06:22 PM

Ya, i was just worried the dual core optimizations/drivers might cause a conflict, but i'll try it out!

I am so excited about my CABYE 0540FPAW! I am hunting for 3.1-3.2 with my shilled setup.

Only question now is to remover the IHS or not before i "de-virginize" it :P
I just removed one on my 146 CABYE 0536GPMW. Load temps of 53C on Water with a Swiftech Storm had me pissed so off it came.

Load temps dropped 14C to 39C with 1.55v @ 2800MHz.

Be very carefull using the razor blade. I found it much easier to slide the razor blade under the IHS at a corner, more like just pushing it under the IHS. But take care not to slide blade in to far. There are some circuits in there that can be damaged. Just take a look at one some has posted with the IHS off and you will see what I mean.

I'm sure someone else has posted this in this thread before but here it is again. A short movie on the removal. This fella used a razor and a screw driver to pry the IHS off. I didn't like the idea of twisting a blade under the IHS so I just used the razor to cut the sealing material but either will work.

IHS Removal (http://www.desertshooter.nl/IHS2.wmv)

Good luck!

dogsx2

11-21-2005, 06:58 PM

I just removed one on my 146 CABYE 0536GPMW. Load temps of 53C on Water with a Swiftech Storm had me pissed so off it came.

Load temps dropped 14C to 39C with 1.55v @ 2800MHz.

Be very carefull using the razor blade. I found it much easier to slide the razor blade under the IHS at a corner, more like just pushing it under the IHS. But take care not to slide blade in to far. There are some circuits in there that can be damaged. Just take a look at one some has posted with the IHS off and you will see what I mean.

I'm sure someone else has posted this in this thread before but here it is again. A short movie on the removal. This fella used a razor and a screw driver to pry the IHS off. I didn't like the idea of twisting a blade under the IHS so I just used the razor to cut the sealing material but either will work.

IHS Removal (http://www.desertshooter.nl/IHS2.wmv)

Good luck!

Not a very good video :(

UFgatorSean

11-21-2005, 07:33 PM

LOL! I was suprised not to see a bloody niblet of finger wrapped in a towel after that!

TEDY

11-21-2005, 11:07 PM

coop

11-21-2005, 11:14 PM

3100..for today :) http://img292.imageshack.us/img292/2390/op32m231230026nn.jpg (http://imageshack.us)

Dani

11-22-2005, 12:00 AM

Sorry but SP2004 is not the best Stabilitytest.
If you want to go sure then use Prime95 version 24.14!
And make the Test Custom FFTS in place changing every 15 Minutes. (8-4096).
Thats the ultimative Stabilitytest for the CPU!!!!!!!!
@Rufus7, im now on Prime95 v24.14 and Custom FFTS in place changing every 15 Minutes. (8-4096)
+8h and running with 3103MHz 1.5V 23ºC ambient AIR, nothing special with Prime :D

Rufus7

11-22-2005, 12:13 AM

So and thats running still yesterday here on my 170 0536MPMW. Ambient Temps between 17-18,5°C.

http://www.bilder-hosting.de/uploads/d4766a9f96.jpg (http://www.bilder-hosting.de)

alpha0ne

11-22-2005, 12:17 AM

@Rufus7, im now on Prime95 v24.14 and Custom FFTS in place changing every 15 Minutes. (8-4096)
+8h and running with 3103MHz 1.5V 23ºC ambient AIR, nothing special with Prime :D

There is always some dissent as to what is deemed to be an acceptable proggy to show 100% torture stability (mainly by those who's systems are not 100% using Prime95 v24.14 :rolleyes: )

You have a marvellous chip there Dani if you can run Prime v24.14 @ over 3.1Gigs :fact: :clap: , definately a keeper :)

Rufus7

11-22-2005, 12:41 AM

@Rufus7, im now on Prime95 v24.14 and Custom FFTS in place changing every 15 Minutes. (8-4096)
+8h and running with 3103MHz 1.5V 23ºC ambient AIR, nothing special with Prime :D

But your first Screen at 3,1Gig and 1,5Vcore under Air is interesting.

I have an Ambient between 17,5°C und 18,5°C but you Chipset at higher Ambient is lower than mine.
And i have the original DFI Northbridgecooler on Board.
Yours must be modded or under water or your Ambient is below 15°C.

TheMooN

11-22-2005, 02:28 AM

I Would appreciate results from anyone running a 148 CABYE 0543 FPMW :) .

I won't be able to stick any juice through mine for a couple of days and I am curious as to what this stepping can/could do .

Cheers !

tatts

11-22-2005, 02:34 AM

So and thats running still yesterday here on my 170 0536MPMW. Ambient Temps between 17-18,5°C.

in all fairness, 2.5ghz on a 170 isnt much of a OC compared to others and you go on about this prime 24.14 but its only using 50% of your cpu, not exactly tortue is it? :stick:

gundamit

11-22-2005, 02:48 AM

in all fairness, 2.5ghz on a 170 isnt much of a OC compared to others and you go on about this prime 24.14 but its only using 50% of your cpu, not exactly tortue is it? :stick:At 1.33v its probably could run Prime indefinitely! I want to see something freaky! Show us 2.8ghz and up! :p:

Dani

11-22-2005, 03:22 AM

But your first Screen at 3,1Gig and 1,5Vcore under Air is interesting.

I have an Ambient between 17,5°C und 18,5°C but you Chipset at higher Ambient is lower than mine.
And i have the original DFI Northbridgecooler on Board.
Yours must be modded or under water or your Ambient is below 15°C.
Yes it's modded, here is a pic of my old setup with tuned VapoChill LS, but I use that NB cooler, 100% copper, fan @ silent :)

Chipset cooler (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/DFI%20nF4%20Ultra-D%20piirisarja%20j%e4%e4hy.JPG)

..and ambient temp is 22-23ºC ;)

Dani

11-22-2005, 03:26 AM

There is always some dissent as to what is deemed to be an acceptable proggy to show 100% torture stability (mainly by those who's systems are not 100% using Prime95 v24.14 :rolleyes: )

Hehheh, that's true :p:

You have a marvellous chip there Dani if you can run Prime v24.14 @ over 3.1Gigs :fact: :clap: , definately a keeper :)
Thanks mate, should try someday with CO2 :slobber:

Monge

11-22-2005, 03:39 AM

Dani: awesome chip that is :)

Any results with the 146 CABYE 0542FPMW?

tatts

11-22-2005, 03:57 AM

Monge

11-22-2005, 04:01 AM

i got 2 more today :toast:
CABYE 0542FPMW batch 0100 & already on 3ghz :D
CAB2E 0540FPMW batch 0143 (not tested yet)

hope one has a stronger mem controller than the FPBW to get me passed 3.1ghz stable ;)
Congrats with new Opterons :)
How much vcore for the 3GHz on CABYE 0542FPMW?

Monge :toast:

tatts

11-22-2005, 04:15 AM

thanks :toast:
the FPBW does 3ghz 1.5V & 3.1ghz 1.55V (both stable) but the mem controller craps out past 3.1 :(

heres the 1st test of the 146 CABYE 0542FPMW batch 0100 - 3ghz 1.55V :woot:

http://img398.imageshack.us/img398/417/10x30005428jr.th.jpg (http://img398.imageshack.us/my.php?image=10x30005428jr.jpg)

D4nnyOcean

11-22-2005, 04:23 AM

GPMW ?
I'm pretty sure that was the code. I'll double check the heatspreader.

GoThr3k

11-22-2005, 05:15 AM

Mikestore

11-22-2005, 06:46 AM

my opteron 146 CABYE 0540FPBW
http://img475.imageshack.us/img475/2410/opteron6oree14minuti0du.jpg (http://imageshack.us)

and this is my super pi 1mb..
http://img476.imageshack.us/img476/9079/15yg1.jpg (http://imageshack.us)
winxp professional sp2 dayly use
i have a question... in async whit my old bh5 i cant boot whit max async latncy at 7ns but boot at 9 or 8... and max preamble at 5.5ns..but boot at 6ns...

super pi 32mb whit same OS and same config but 295x10 asincro...i have passed super pi 32mb at 1.48 volt..... but prime is dont stable...
http://img476.imageshack.us/img476/9319/superpi32mb2950148ok8mk.jpg (http://imageshack.us)

Monge

11-22-2005, 06:53 AM

How does the CABYE 0540FPBW stepping perform or work under compressor cooling?
Cold bug?

alpha0ne

11-22-2005, 06:56 AM

in all fairness, 2.5ghz on a 170 isnt much of a OC compared to others and you go on about this prime 24.14 but its only using 50% of your cpu, not exactly tortue is it? :stick:

Can you count ???, how many instances do you see running, 1 or 2 :rolleyes:

If he only had one instance running then yes, he would only be using 50% of the available processing power with 50% idle, waiting to do other things, like play BF2 at the same time :p: :)

187(V)URD@

11-22-2005, 08:24 AM

any results on the 146 CABYE 0540 APMW? I will recieve such stepping tomorrow.

Rufus7

11-22-2005, 08:33 AM

Yes it's modded, here is a pic of my old setup with tuned VapoChill LS, but I use that NB cooler, 100% copper, fan @ silent :)

Chipset cooler (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/DFI%20nF4%20Ultra-D%20piirisarja%20j%e4%e4hy.JPG)

..and ambient temp is 22-23ºC ;)

Dani thats a fine Mod.
I have nothing modded on the Board because i don´t wanna loose the Warranty.
But the Winter is bet tiem for Aircooling nice Chip you have.
That´s my 146CABNE0530APMW on Air. With An Thermalright SI120. Ambient was around 16°C.

http://www.bilder-hosting.de/uploads/f471992ac5.jpg (http://www.bilder-hosting.de)

TEDY

11-22-2005, 08:33 AM

any results on the 146 CABYE 0540 APMW? I will recieve such stepping tomorrow.

i want to know also ;)

tatts

11-22-2005, 08:52 AM

Can you count ???, how many instances do you see running, 1 or 2 :rolleyes:

If he only had one instance running then yes, he would only be using 50% of the available processing power with 50% idle, waiting to do other things, like play BF2 at the same time :p: :)
sorry but why was he going on about how it puts both cores under 100% load and i only see 50% which means BS and tbh, that is lame for a 170 anyway :stick:

Rufus7

11-22-2005, 09:03 AM

in all fairness, 2.5ghz on a 170 isnt much of a OC compared to others and you go on about this prime 24.14 but its only using 50% of your cpu, not exactly tortue is it? :stick:

Tatts two times 50% are 100%!!!!
http://www.bilder-hosting.de/uploads/ef5070c89c.jpg (http://www.bilder-hosting.de)

http://www.bilder-hosting.de/uploads/f32f3c5271.jpg

tatts

11-22-2005, 09:06 AM

now you post one with 100% but come on, alot of these chips are doing 2.8ghz so it aint gonna fail doing 2.5ghz is it :rolleyes:

alpha0ne

11-22-2005, 09:11 AM

sorry but why was he going on about how it puts both cores under 100% load and i only see 50% which means BS and tbh, that is lame for a 170 anyway :stick:

He has only highlited one instance, there should be two showing 50% each, he has shown two instances running in the background each taking 50% of available processing power :)

Also 2.55Gig is not very high but his Vcore is very low, but on average the 170's will do 2.7GHz with under 1.5Vcore which IMHO is nothing to sniff at

Check out this (http://i4memory.com/showthread.php?p=28423#post28423) linky that confirms my findings :fact:

Rufus7

11-22-2005, 09:13 AM

No tatts theirs a Link below with a screen. Theres the Processmanager with two times
50% youve got only to click it! ive got two cores on the Die!!!

http://www.bilder-hosting.de/uploads/377f7e97a6.jpg (http://www.bilder-hosting.de)

before

11-22-2005, 09:23 AM

any results on the 146 CABYE 0540 APMW? I will recieve such stepping tomorrow.

:wave:

I am looking for feedbacks for this stepp too...
It seems to be a good one, but anyway, I am unable to find overclockings of it.

tatts

11-22-2005, 09:27 AM

Also 2.55Gig is not very high but his Vcore is very low,
WOW 2.5ghz on stock vcore :clap: :rolleyes:
dont forget, cpu-z reads it wrong on dfi's :rolleyes:

end of the day, hes trying to fill your head with BS, everyones OC isnt stable if they havnt used prime 24.14 and posting the same pictures of an average clock going on bla bla bla, lay off the steroids mate :slap:

TEDY

11-22-2005, 09:35 AM

Should be better then CABGE for sure, a little worse then FP_W series i think and pretty same as CAB2E.

alpha0ne

11-22-2005, 09:39 AM

WOW 2.5ghz on stock vcore :clap: :rolleyes:
dont forget, cpu-z reads it wrong on dfi's :rolleyes:

end of the day, hes trying to fill your head with BS, everyones OC isnt stable if they havnt used prime 24.14 and posting the same pictures of an average clock going on bla bla bla, lay off the steroids mate :slap:

Hahaha what a load of it, now I know that your single core wont even pass @ 2.55GHz with default Vcore :slap: :rolleyes:

Stop the BS boy, just because you dont agree does not mean you have the right to call other ppls opinions and findings BS :stick: :kissbutt:

before

11-22-2005, 10:06 AM

Should be better then CABGE for sure, a little worse then FP_W series i think and pretty same as CAB2E.

As far as I know, the stepp CABYE 0540 APMW is currently sold as a pretested by trendpc (from Germany I guess) for a frequency of 2950 @ 1.5V... Seems good, but I prefer to see good old sreenshots... :D

tatts

11-22-2005, 10:20 AM

I know that your single core wont even pass @ 2.55GHz with default Vcore :slap: :rolleyes:

thats odd, it passes @ 2.8ghz stock vcore & 3.1ghz 1.55V, take your head out of his :slapass:

Rufus7

11-22-2005, 10:37 AM

tatts

11-22-2005, 10:46 AM

Tatts you know as well that CPU-Z validation counts and not what you have in your Bios Settings.Your 1,55Vc for 3.1Gh isnt amazing. Because you havew to give in your Bios
1,55 and 104% VID. that´a too much for a Screenstable or Windowsstable System!
Gonna show you 3,1Gig at 1,408Vc not Primestable but Bench and Windowsstable.

well if were going by cpu-z volts which are wrong then mine is 1.5V for 3.1ghz which is stable (not bench stable) i can bench mine @ 3.2ghz 1.55V (in bios) but why? it fails prime so isnt stable. i only ever give results which are stable & by the voltage to what i set in the bios as it is alot more accurate than any windows app, use a MM to measure your OC and i bet you it reads slightly higher than you set in the bios and nowhere near what cpu-z tells you.
head over to dfistreet, you might be suprised & even learn something ;)

p.s. show me some more 146's doing 3.1ghz stable with 1.55V or less (bios) or 1.5V in cpu-z please

Lastviking

11-22-2005, 10:48 AM

This is my 4th 146 its not the best but it take a good second place ;) , and its for sale now.

http://files.upl.silentwhisper.net/upload4/0540fpaw0129.JPG

ZeroX

11-22-2005, 10:49 AM

Im interested in the results of CABYE 0540 APMW too. The first who get the CPU post here :D

before

11-22-2005, 11:01 AM

Im interested in the results of CABYE 0540 APMW too. The first who get the CPU post here :D

I will receive one in about 2 days, may be three... and I am waiting for another one that might be of CABYE (or a CABGE :censored: )... wait and see! I will post my results here.

Rufus7

11-22-2005, 11:05 AM

well if were going by cpu-z volts which are wrong then mine is 1.5V for 3.1ghz which is stable (not bench stable) i can bench mine @ 3.2ghz 1.55V (in bios) but why? it fails prime so isnt stable. i only ever give results which are stable & by the voltage to what i set in the bios as it is alot more accurate than any windows app, use a MM to measure your OC and i bet you it reads slightly higher than you set in the bios and nowhere near what cpu-z tells you.
head over to dfistreet, you might be suprised & even learn something ;)

p.s. show me some more 146's doing 3.1ghz stable with 1.55V or less (bios) or 1.5V in cpu-z please

If you need some Chips look on Oc-Inside or Hardwareluxx in the S939Steppingthread.And you´ve got only 3Gig Screen with 1,55VC >Realcore in Bios and only 1M Stable!!!!!

http://www.oc-inside.de/index_d.html

Or loook here!

http://monsterprozi.mo.funpic.de/opt146html.htm

TEDY

11-22-2005, 11:11 AM

As far as I know, the stepp CABYE 0540 APMW is currently sold as a pretested by trendpc (from Germany I guess) for a frequency of 2950 @ 1.5V... Seems good, but I prefer to see good old sreenshots... :D

you sure ? ;)

tatts

11-22-2005, 11:27 AM

If you need some Chips look on Oc-Inside or Hardwareluxx in the S939Steppingthread.And you´ve got only 3Gig Screen with 1,55VC >Realcore in Bios and only 1M Stable!!!!!
there aint many doing 3.1ghz on that list & all but 1 needing more vcore, also, if you have a look around, youll find i posted a SS of 3.1ghz stable using 1.5V in cpu-z :rolleyes: the one youre referring to is a 0542fpmw which i got today and isnt much of a clocker
anyway enough of the nonsense, youve kept me laughing this afternoon, thank you :toast:

Rufus7

11-22-2005, 11:43 AM

tatts but in the List are only the CHIPS with Prime 24.14 Running minimum for 2Hours!!SuperpPi and OCCT is for the Dumb.
And not only 1M!!!!!!

before

11-22-2005, 11:50 AM

you sure ? ;)

I have read that from French overclocker boblemagnifique @ overclocking-masters.com... I think he can be believed; but once more, I prefer to see screenshots.. :p:

tatts

11-22-2005, 12:06 PM

tatts but in the List are only the CHIPS with Prime 24.14 Running minimum for 2Hours!!SuperpPi and OCCT is for the Dumb.
And not only 1M!!!!!!
i seriously suggest you do some homework mate.
mine can run prime 24.14 for 3 hours easy @ 3.2ghz but fails on occt? occt is only a pre prime test, surely you know that? & everyone knows a OC isnt stable unless prime has run for at least 8 hours, 2 hours is just tickling it :rolleyes: and when did anyone say superpi was used for stability?

and btw, i aint having a go mate, just pointing out the facts as i think you have a few mixed up here

TEDY

11-22-2005, 12:19 PM

S&M is mostly for stability me thinks

Play games 24 hours straight ;)

Jupiler

11-22-2005, 12:27 PM

Enough crapping and throwing insults at each other.
This is an overclocking thread, so everyone is entitled to post his results, whether it's a 500Mhz or 1500Mhz one, it's doesn't matter.
You guys need to appreciate and respect other members results.

Shark-357

11-22-2005, 12:34 PM

Here´s what i got with a PC on the window :D

http://img475.imageshack.us/img475/2784/opterohn3261mhz6rg.jpg

the bench window :banana:

http://img23.imageshack.us/img23/1509/okno16md.jpg

tatts

11-22-2005, 01:26 PM

^^ pmsl, whats that on top of your case?
nice clock btw mate :toast:

bit of new, the future of opterons isnt looking good, glad i got 1 146 for each rig & a spare :D theres rumours everywere there might be a delivery in january but there is a chance no one will be getting anymore of these sweet chips :( link (http://forums.anandtech.com/messageview.aspx?catid=28&threadid=1738124&frmKeyword=&STARTPAGE=1&FTVAR_FORUMVIEWTMP=Linear)

TEDY

11-22-2005, 01:35 PM

yeah tatts : ALL CAUSE OF YOU !!!!

15 Andyy23 0540APMW no Wakü Prime 2950MHz@1,488V

tatts

11-22-2005, 01:40 PM

all because of me, i have 1 for each rig & a spare incase one goes pop.
what about people on ebay, theres a few ive seen who have over 15 for sale/sold at ridicolous prices and you say im the cause pmsl, i offered to help you get one which is thrown back at me, cheers mate

TEDY

11-22-2005, 01:41 PM

you did tried but you seen price rocketed to 151Ł ? if only was 120Ł as from start ;)

no worry i ordered 4 at computersma :D

Shark-357

11-22-2005, 01:46 PM

^^ pmsl, whats that on top of your case?
nice clock btw mate :toast:

Thx mate :toast:

offtopic:
Half of the case is custom build and on the top of the case is a box which houses radiator,fans and other stuff like fan controlers,switches and a little lcd

gundamit

11-22-2005, 02:14 PM

tatts

11-22-2005, 02:28 PM

i had an email from a retailer were i had one on order and they refunded me saying there not expecting anymore from amd and if they did it wouldnt be until january, ive contacted other retailers which said the same and most places wont let you pre-order one anymore so something fishy is going on

eviLRuLeZ

11-22-2005, 03:01 PM

http://img125.imageshack.us/img125/7346/opty1482855136v8lb.th.jpg (http://img125.imageshack.us/my.php?image=opty1482855136v8lb.jpg)

http://img125.imageshack.us/img125/2743/2930pi4mb9bm.th.jpg (http://img125.imageshack.us/my.php?image=2930pi4mb9bm.jpg)

http://img125.imageshack.us/img125/3482/2955pi2mb6ps.th.jpg (http://img125.imageshack.us/my.php?image=2955pi2mb6ps.jpg)

suicide screen on aircooling, 1.37v : http://valid.x86-secret.com/show_oc.php?id=52230

Opteron 148 CABYE 0528 GPMW
Cooling : xp90c + se2
Ambient temp : 22°