PDA

View Full Version : And that brick wall won't budge!



charlie
01-03-2003, 08:11 PM
I just can't seem to run decent memory timings with decent fsb speeds at the same time!
I can only get about ddr380 at cas2, 5,2,2 whicj is useless because my chip's sweetspot is at ddr450+. I'm using Corsair XMS3200C2 and at ddr450, I have to run cas2, 7,3,3
My motherboard's an Albatron PX845PEV Pro and that itself may be my limiting factor. But I'm so sick and tired of waiting for backordered hardware to show up...
Granite Bay, fooooo!!!!!!!!!!!!!
So maybe I'll hold onto my Albatron until REAL tech comes down the pipe...like Canterwood or SiS655???
BTW, anyone know the vdimm mod on the Albatron??
The chip in question (my guess) is a 14 pin critter, has a strange
"F" looking symbol then P21SD and under it, 74VHC74??? Can anyone ID it?

Holst
01-04-2003, 05:57 AM
If you look at the red bits and tell us what the chips are somebody might do you a mod.

charlie
01-04-2003, 09:01 AM
Excellent, thanks!!
here's the chips you requested.
chipset #2
8 pin, RT9174 on top, CS4HV1 on second line

chipset #3
5 pin, APL1581 on top, AE548 on second line

charlie
01-04-2003, 05:21 PM
bump

charlie
01-08-2003, 05:22 PM
DDTung? Anyone??
;) :) ;) :)

Blue078
01-08-2003, 05:46 PM
I had a albatron px845E pro II, need more vdimm on it to.
I found the .pdf on the rt9174

tried a 10k pot on leg6 and it fried my board, never would power up after that,

SO be carful;) I really liked that Albatron mobo

Tweaked!
01-08-2003, 06:03 PM
Charlie, I'm going to move this over to the mobo vmod forum. You should get the responses you're looking for here:)

charlie
01-15-2003, 10:54 AM
bump??

charlie
01-16-2003, 01:58 AM
oK,
I've done more research and here's what I've got for ya'
Looking at the above pic's,
here's #1 Fairchild P21sd, 74vhc74

what's this???? needed for a mod??
C

charlie
01-16-2003, 02:00 AM
And here's #2
RT9174


am i getting warm?
C

charlie
01-16-2003, 02:02 AM
And here's #3



Any better???
DDTUNG, HELP!!!!!!!!!!!!!!!!!!!!!!