AI7 + kingston tccd = problems

[blind_ripper]

i have kingston hyper X 3200ULK2 but a cant get over 225mhz no mater whate voltage or timings :mad: , i have send a e-mail to abit but no replay im stil waiting i hope some wanne can help me thx

[blind_ripper]

i hope abit wil help , or i losse my believe in abit :( i had always buy a abit bort or graka so di can help me now thx :mad:

[calcal]

uhhh, thats the lamest reason

what cpu are running, not all cpu can do above 225 fsb

try 2.5-3-3-6 and 2.7 vdimm and go from there

[Mr. Tinker]

Could be the ram. TCCD but not brainpower, not known to be good clockers. I have the same stuff and will be trying it in a couple weeks witha week 17 venice and a DFI NF4 LP Ultra-d. If that combo can't get the ram up to good speeds, I'd call it bad stuff.

[wwwww]

AI7, correct me if I'm wrong, but isn't that an 865pe board? TCCD sucks on 865pe.

[blind_ripper]

yes my cpu can do over 250fsb .
yes thats the chip set :(

[Mr. Tinker]

I recently got my Kingston 3200ULK2 up to 270htt at 2.5-3-3-11.

[k0nsl]

I had a stick of Kingston HyperX (TCCD) and it would easily do 250FSB with only 2,8V. Great stuff.

-k0nsl

[Mr. Tinker]

I had a stick of Kingston HyperX (TCCD) and it would easily do 250FSB with only 2,8V. Great stuff.

-k0nsl
ONE stick? what timings?

[hipro5]

AI7, correct me if I'm wrong, but isn't that an 865pe board? TCCD sucks on 865pe.

OCZ's TCCD does 285MHz 1:1 and Cas 2.5-3-3-5 on my AS8(865PE) and about the same on my AI7 at 2.8Vdimm...... ;)

Try this:

Cas 2.5 - 5(or 6) - 3 - 3 , Bios and Video cache = Disable , 32min , Auto , Normal , 5(or 6) , Enable , DISABLE(CPC)....and 800 strap......at 1:1.....

[blind_ripper]

wil do thx hipro