View Full Version : Temps to High?
RiceLover
08-19-2005, 10:08 PM
Set up my watercooling a couple of days ago and was wondering if my temps are to high.
GPU Idle-53 Stock 425/1100
CPU Idle-42
GPU Load-57 3.2@4.131 1.6v
CPU Load -58
Ambient temps are 28.5 Any coments or suggestions would be much appriciated :D
MaxxxRacer
08-19-2005, 10:21 PM
they seem a bit high to me.
are you running a gpu block? it doesnt say in ur sig.
RiceLover
08-19-2005, 10:26 PM
they seem a bit high to me.
are you running a gpu block? it doesnt say in ur sig.
It says maze 4 in my sig but yes. Its been really hot in L.A.(up to 33 in my room) but I was thinking those temps are a little high.
MaxxxRacer
08-19-2005, 11:40 PM
ya ur temps are WAY high then. usually the gpu temp sensors are atleast vaguely accurate and show relative changes in temperature quite well.
skycrane
08-20-2005, 04:04 PM
definatly way to high as Maxxx said. your cpu shound not be over 40C, if it is, you have a probem with one or more of the following... pump, rad, tubing, blocks, res, and fans :) its got to be one of these.
Bourne
08-20-2005, 04:44 PM
I had the same GPU temps on 6800 Ultra with Danger Den NV-68
RiceLover
08-20-2005, 10:50 PM
definatly way to high as Maxxx said. your cpu shound not be over 40C, if it is, you have a probem with one or more of the following... pump, rad, tubing, blocks, res, and fans :) its got to be one of these.
Well its very hot in my room (28-33c) but I think the cpu is getting a little hot. SHould I take off the tdx and reseat it?
MaxxxRacer
08-20-2005, 11:50 PM
id try reseating it, but ur gpu temps are aslo sky high, so it makes me think your water temps are too high. how much airflow do you have going through your radiator?
RiceLover
08-20-2005, 11:53 PM
id try reseating it, but ur gpu temps are aslo sky high, so it makes me think your water temps are too high. how much airflow do you have going through your radiator?
Well i have that clear dd shroud with 2 96 cfm fans.
MaxxxRacer
08-20-2005, 11:55 PM
the fans are sucking through the radiator at 12v?
RiceLover
08-21-2005, 01:47 AM
the fans are sucking through the radiator at 12v?
Yep. Pushing air on the heatercore.
WaltS_2
08-21-2005, 02:29 AM
Yep. Pushing air on the heatercore.
They need to suck air through the heatercore.
Not push it through.
RiceLover
08-21-2005, 02:32 AM
They need to suck air through the heatercore.
Not push it through.
?? So they need to pull air away?
?? So they need to pull air away?
Exactly.
fareastgq
08-21-2005, 10:19 PM
that bonneville core should be working wonders for u, they alrdy suggested what I was gonna say so.. yeah, just do it. Btw, the most u can do for 1/2" ID tygon is 3/4" barbs :)