XS Series Clock Gen's

[BB mods's]

XS Clockgen list

NF2 (http://www.snt-systems.com/Uploader/uploads/CG-NVNF2.rar)

NF3 (http://www.snt-systems.com/Uploader/uploads/CG-NVNF3.rar)

NF4 (http://www.snt-systems.com/Uploader/uploads/CG-NVNF4.rar)

DFI875p-t (http://www.snt-systems.com/Uploader/uploads/CG-ICS952607xs%20beta.rar)




More to come

[IYP]

very nice knife you got there

good luck with the project

wait you said "clockgen goes under the knife" .....we modding clockgen or CPUz?

[BB mods's]

Both maby,with only a few min's into this source i can tell u now it is some of THE most beautifull and well layed code i have ever seen,so clean and to the point,i give CPUz A++ in C++ :D

[BB mods's]

Ok demo 1 with icon and text changes for 875p-t mobo is done,ill be adding a new GUI to them after i get a new skin made up for it Beta here (http://www.snt-systems.com/Uploader/uploads/CG-ICS952607xs beta.rar)

[BB mods's]

Guy's i left 1 of my BAK file's in the folder so if u see it dont spaz...it's harmless and just a backup of the orig clockgen :toast:

[BB mods's]

Me after 2 week's in C :( (http://www.albinoblacksheep.com/flash/girtarted.php)

[Magnj]

would there be some way to integrate the 2 and still be able to verify? That would be VERY nice.

[BB mods's]

That is the next step with more permission from CPUz :)

[BB mods's]

Me after 2 week's in C :( (http://www.albinoblacksheep.com/flash/girtarted.php)


Note Gir (me) punching in key's like there on fire!!!!!

[IYP]

i <3 gir!!

great job there man....just gimme a ring if you need a second hand....err 3rd and 4th hehe

[BrokenWall]

dont forget us nforce 4 guys.

[n00b 0f l337]

Or the 915 guys. If someone could finnaly get a good one for p5gdc-deluxe I'd finnaly be able to not want to kill this board...

[Nosfer@tu]

What are you using for your Asus P5WD2

[2fink]

Ok demo 1 with icon and text changes for 875p-t mobo is done,ill be adding a new GUI to them after i get a new skin made up for it Beta here (http://www.snt-systems.com/Uploader/uploads/CG-ICS952607xs beta.rar)

works great for me on my aopen xc-cube!

[BB mods's]

Ok Nforce guy's ill take care of u today,Fink ill mod u a special 1,THe p5wd2 ill Have to talk to CPUz about getting 1 made up then i can mod it for ya.

[Jasonhk]

Kewl :D

[Z3NiTH]

Cool stuff, thanks a lot :D

[BB mods's]

Any time

[BB mods's]

NF4 clock gen (http://www.snt-systems.com/Uploader/uploads/CG-NVNF4.rar)

[giorgioprimo]

NF4 clock gen (http://www.snt-systems.com/Uploader/uploads/CG-NVNF4.rar)

thanks :)

[BB mods's]

any time

[crodan85]

Can you do a NF3 version.

[BB mods's]

Can you do a NF3 version.


Hrm....yes sir i can. give me 10 min's to compile :)

[IceBawx]

BB insisted that i post a pic of my modded tornado fan...tis a 92mm fan blade on a 120mm com, turns about 4k rpm and is quite silent while still pushing the same cfm as the 120 did. Here she is, enjoy :D

http://www.snt-systems.com/Uploader/uploads/Image11.JPG

[crodan85]

Hrm....yes sir i can. give me 10 min's to compile :)
Thanks for that I just dont like the nf4 boys getting it all the action so I thought I would ask :)

[BB mods's]

NF3 clockgen (http://www.snt-systems.com/Uploader/uploads/CG-NVNF3.rar)

[crodan85]

NF3 clockgen (http://www.snt-systems.com/Uploader/uploads/CG-NVNF3.rar)
No problems works very well thanks :)

[BB mods's]

any time

[Bloody_Sorcerer]

pretty nice, but the big arrow pointing at 2.5 ghz/300 FSB is kinda annoying :-)

[BB mods's]

it's there to push u to go higher..ill remove if wanted

[masterofpuppets]

Could you post any screens BB, or someone else? I can't be bothered to use Windows right now. I've had a 1 week uptime and won't give it up now!

[Z3NiTH]

BB, is there any way to decrese the values between clicks?
e.g. I'm on 3242 (12 x 270.19) but the next incremant is 3251 which my Mach II just can't handle. If I can get .5 for something like 3247 I'm sure i can break the 26s superPi barrier...

Thanks :)

[BB mods's]

BB, is there any way to decrese the values between clicks?
e.g. I'm on 3242 (12 x 270.19) but the next incremant is 3251 which my Mach II just can't handle. If I can get .5 for something like 3247 I'm sure i can break the 26s superPi barrier...

Thanks :)


Im sorry but i do not have permission to change any of the clock devider's or anything in the main of the program..im just reskinning...talk to cpuz about the clock multy he uses.

[heater918]

:clap: http://img397.imageshack.us/img397/843/clkgen2medium7ox.jpg :clap: Thanks BB cool.

[BB mods's]

HAHAHAHAHA heater u stole my "stuff" folder!!!!!! Ill be sure to send u ton's of good stuff to fill it with :)

[ex2cib]

i think everyone has had a "stuff" folder @ least once in their lives. if you didn't where else would all the stuff go that has no other home?

[Ugly n Grey]

Thanks for this BB, it is appreciated.

Ugly

[Der_KHAN]

:clap: http://img397.imageshack.us/img397/843/clkgen2medium7ox.jpg :clap: Thanks BB cool.coool

can i have my own version "for Der_KHAN" ? :D

... for nf4 of course

[heater918]

HAHAHAHAHA heater u stole my "stuff" folder!!!!!! Ill be sure to send u ton's of good stuff to fill it with :)
Ha Ha u very funny. Seriously yours missing? :confused: :)

[BB mods's]

coool

can i have my own version "for Der_KHAN" ? :D

... for nf4 of course


YGPM

[Der_KHAN]

YAY! :banana:

http://img382.imageshack.us/img382/1115/cgkhan4io.jpg


... will there be custom CPUz versions too? :slobber:

[BB mods's]

If i get permission yes

[AH^DK]

Wassup T?

Could you make me a VIA K8T800PRO version for Asus A8V?

With unlimited voltage controls etc? And HTT multis and such?

[2fink]

Wassup T?

Could you make me a VIA K8T800PRO version for Asus A8V?

With unlimited voltage controls etc? And HTT multis and such?


im sorry but i do not have permission to change any of the clock devider's or anything in the main of the program..im just reskinning...talk to cpuz about the clock multy he uses.

dont think he can do it. email cpuz

[BB mods's]

No i can not edit the code.


EDIT::::
CPUz trusted me enuff to let me start moding his software.I will not ruin that by going in and messing with his coding.Plese dont pm me and ask any more people.

[Jupiler]

The beta version for the 875P-T freezes my system once I change settings.
I have to shutdown my rig completely for it to reboot.

CG-ICS952618 works fine for the board, CG-ICS952607 doesn't.

Can you check this out and eventually make the necessary changes please?

[BB mods's]

CG-ICS952618 was made for the DFI 855gme mobo..the 875p-t was made for 875 chipset mobo's Im suprised it even opend.Ill mod the dothan clock gen for u later today.Please post your pc's spec's

[Jupiler]

DFI 875P-T (0326 bios)
630 Pressi @ 4ghz
2*512 Kingston BH5
9800XT
420W OCZ Powerstream
....

[BB mods's]

Hmm what revision mobo? A or B?

[Jupiler]

Where do I check that?

[BB mods's]

On the mobo near the DIMM slot's i have a revision A 875p-t and i just got done testing it all the way to 300fsb...no problem's here with it.

[Entity_Razer]

Any change of a Nforce 2 once for me? :D

[BB mods's]

NF2 (http://www.snt-systems.com/Uploader/uploads/CG-NVNF2.rar)

[Jupiler]

Mine is rev. A too.

Just checked the ICS chip and it's the ICS952618.
Which does your have?

[BB mods's]

Same PLL as mine...idl what is going on with your's but it has been running fine on mine all day.i did step by step fsb changes and still havent got any problem's ??

[Jupiler]

Don't get it either.
Once I make the changes, my rig hardlocks and I have to shut it down completely. Even pushing the reset button doesn't help.

If the PLL is the ICS952618, then why should we use the clockgen file for a different PLL (ICS952607)??
Guess I'll be sticking to the 952618 clockgen then.

[BB mods's]

odd that u have this problem

[Entity_Razer]

Thank you BB :)

[sin0822]

ye thanks for my as8 one.

[BB mods's]

Np M8^^

[Tyrou]

would it be possible to make an AA8XE version (it uses the µGuru :()

[BB mods's]

Email CPUz for clockgen.

[Tyrou]

ok, thanks :)

[[XC] moddolicous]

Thanks BB for the Nforce3 one. Look pretty cool!

[BB mods's]

No problem,Im gona be running my 3200+ rig today on the MSI K8N Neo 2 NF3 mobo testing out some HIGH fsb :)


And every 1 think's im strictly intel :rolleyes:

[Critical.Arrow]

I need a clockgen for a Chaintech 9PJL2 Apogee Silver (865pe+ICH5). Thank you :) :toast:


Critical.Arrow

[drcrawn]

Awesome idea BB Mods! Can you do the Asus Via 800 chipset model? This

http://www.cpuid.org/cg.php?cgid=ICS950405

[BB mods's]

Post the PLL number please.

[drcrawn]

It's an ICS, 950405...right?

I am 800 miles from my board, but I believe that's the pll right in the link I posted. I can't physically look at the chip ATM.

[BB mods's]

It's an ICS, 950405...right?

I am 800 miles from my board, but I believe that's the pll right in the link I posted. I can't physically look at the chip ATM.



I was refering tot he man above u asking for the 865 clock gen,ill mod the via gen for u tonight if i get some free time (head hunting for my 92mm tornado atm)

[drcrawn]

Ooops my bad BB Mods's. (embarrassed=me)

No rush, won't be able to test anyway for awhile.

So what exactly are you doing? Can you post a screen of the modded look?

Thx bro.

[BB mods's]

IM just adding the XS logo to them,and ill build a new GUI for it when i get moved and settled in.

[masterofpuppets]

Yo BB, could you mod the P4C800-E/IC7-Max 3 clockgen (they are the same program). Thanks dude.

[BB mods's]

Yup ill get to it

[n00b 0f l337]

And how bout a p5gdc-deluxe? Its 915 but nothing seems to work for it.

[i found nemo]

check ur pm bb :)

[Critical.Arrow]

I was refering tot he man above u asking for the 865 clock gen,ill mod the via gen for u tonight if i get some free time (head hunting for my 92mm tornado atm)

What and where is the PLL number? Tell me and I'll gladly post it up for you sir.


Critical.Arrow

[BB mods's]

The PLL is a small black chip on your mobo they normal put it verry close to the crystal clock generator (small silver "pod" with a freq wrote on top)

[masterofpuppets]

Have you done my clockgen yet? BTW, a small tip for finding the clockgen, the crystal usually says 14.6 on top of it.

[iS.Terminator]

so you make clockgen work for mobo's that aren't listed in the compability list? can you make me one? PLZ

[stealth17]

Any chance of adding an option to put it in the task bar, next to the clock?

Love the XS version, A++++++!!!

Thanks BB!

[Damien]

bump

mirrors?

[2fink]

bb isnt longer here at xs. you can find it over at hardwareasylum!

[stealth17]

bb isnt longer here at xs. you can find it over at hardwareasylum!

WHAT?!?! What happened?

[2fink]

he and kazoo left xs, because of personal reasons. you will find a thread on hwa about it!

[stealth17]

he and kazoo left xs, because of personal reasons. you will find a thread on hwa about it!

kazoo left too?!?! :eek:

is kazoo a girl?

[Vapor]

Yes, Kazoo is a girl.

[stealth17]

Yes, Kazoo is a girl.

wait, are Kazoo and BB Mods's married or something?

Also, I cant seem to find that thread :(

[Entity_Razer]

Kazoo left because Chilly and her are having a divorce (they are the ones who are/where married) and chilly asked for her to be removed from staff.


About BBmods, you should ask fugger or Chilly about that.

[Gimmpy224]

damn 0.o why did he request for her to be moved? I guess its a touchy subject for him then huh? sucks to hear that though.


real reason why im here is why would a new clock gen help? I kinda know what it does cause I had to have my father explain it to me, but are the ones that our mobo's come with off or something?