View Full Version : My new chipset watercooler! DFI NF4
Kamel
08-17-2005, 04:24 AM
Only drafts and render atm, soon a prototype!
http://web.tiscali.it/watercooler/Vortex/ESPLOSO.JPG
http://web.tiscali.it/watercooler/Vortex/VRC.JPG
Kam
LINOH2O
08-17-2005, 04:31 AM
my best compliments, very nice idea, looks cool! :banana:
:clap:
Very Beautiful
UAZ :clap: :clap: :slobber:
MeltedDuron
08-17-2005, 05:07 AM
i'd hit it
Pessimisten
08-17-2005, 05:19 AM
Nice block but to advanced for my liking for cooling the NB.
iakovl
08-17-2005, 05:50 AM
looks gr8
designing for a silent system?
SamHughe
08-17-2005, 06:08 AM
drooling...just drooling
Sam
Quazi
08-17-2005, 06:22 AM
Very cool indeed. Now do the same for the gpu and cpu waterblocks, add a pump by working out with the manufacture to allow your name to be attached to it, pick the type of radiator to best compliment the flow rates of the waterblocks with the pump, and call it the Kamel Cooling Kit. HEHE
MaxxxRacer
08-17-2005, 07:46 AM
very nice work..
does it work with sli?
toledo
08-17-2005, 08:14 AM
Very nice . Seems like your design is inspired in the Asetek Antartica blocks , witch is quite good .
What software have you used to design that ?
EnJoY
08-17-2005, 09:32 AM
I'd buy it, I'm looking to do a secondary loop in a few months for chipset, hard drives, and possible even ram if a removable/decent block is released. :)
Kamel
08-17-2005, 09:36 AM
Should work with sli...it's' designed to do that!
if u take a look to the special shape, u will notice that the upper fitting, just it on the righside, is positoned to work in the backside of the first VGA, so the card passes right in the middle of the block.
just 11mm ...to fit under the vga. The original air cooler is 14mm .
Solid Edge is the software i've used to design and render this "creature".
Cpu block is ready!
Kam
hi my friend i hope you'll send to me for testing :p
EnJoY
08-17-2005, 11:43 AM
Are you planning on mass producing these blocks? Because as I said, I'd buy one. ;)
Kamel
08-17-2005, 12:15 PM
I'm planning....
Kam
Holst
08-17-2005, 12:20 PM
Please remember that you should only be selling stuff in the for sale forum :)
Nice looking block and a clever solution to the limited space.
Looking forward to seeing it in the flesh :)
MaxxxRacer
08-17-2005, 12:50 PM
Indeed as holst said, you selling here.
you can share your designs, talk about them, chat, etc etc..
but NO advertising. Andvertising of any sort will be removed. that includes prices too.
so anyone interested in buying one of these things, keep it to PM or wait till kamel takes it to the BST.
toledo
08-17-2005, 01:02 PM
Solid Edge is the software i've used to design and render this "creature".
Cpu block is ready!
Kam
Nice , i though you used Solidworks . Do you have a place to built all the stuff , i mean CNC machines and etc .... ?
vkbms
08-17-2005, 01:26 PM
hi my friend i hope you'll send to me for testing :p
Hehehe...i've already asked him if he send me a sample....
:woot: ...
Nice job Kam... your work seems to be more appreciates here that in Italy... :hehe: :brick:
Kamel
08-17-2005, 09:58 PM
No problem guys, i respect the rules, as u can see no prices or selling intention, it's just an idea sharing.
As i told u, just a draft and a render!
Kam
wickedld9
08-18-2005, 07:12 AM
Looking forward to the results! The chipset fan is the loudest thing in my PC...unless the ATI fan kicks in at 100%. :)
en4cer
08-18-2005, 07:16 AM
:eek2: That looks real nice :D
moonlightcheese
08-18-2005, 07:56 AM
as soon as you release this, i want one. if you would please, when you post in the for sale area, post a link here in this thread to the for sale thread. if you don't mind ^_^
Frambosie
08-18-2005, 08:12 AM
looking very awsome! I cant wait to see the prototype and some results, keep us up to date on all the progress!
Bloody_Sorcerer
08-18-2005, 08:21 AM
even though i think NB watercooling is a waste of time, my hat is off for a fantastic design (and the whole gratuitous bling feature)
its beautiful :-)
what about the problem of tubing interfering with slot 1?
MaxxxRacer
08-18-2005, 09:29 AM
u know whats funny. I despise the idea of chipset coolers usually but im really in the market for a passive solution to the NB on my ultra-d as i cant stand the noise it makes
EnJoY
08-18-2005, 09:30 AM
u know whats funny. I despise the idea of chipset coolers usually but im really in the market for a passive solution to the NB on my ultra-d as i cant stand the noise it makes
Exactly, for a secondary like 3/8"ID or smaller tubed loop...a chipset block and maybe even a hd block for my raptor doesn't sound like such a bad idea does it?
Wet Fart
08-23-2005, 01:03 AM
I think I know of at least 10 guys in Australia who'd buy one.
Make it happen ;)
MaxxxRacer
08-23-2005, 02:10 AM
enjoy, your right it doesnt. with a tiny little CSP-Mag, it would be an inexpensive and viable option.
franki-evil.tk
08-23-2005, 06:07 AM
WOW, that looks awesome. but how are you going to make it? if it was me i'd use Waterjet or Abrasivejet.
why don't you find a specialist / someone with a waterjet system and have the peices cut out like that?
unless of course :D you wanna get out the old dremel tool :D
bacon
08-23-2005, 07:48 AM
gimme
any idea on when you'll run a prototype off mate?
Kamel
08-23-2005, 09:15 AM
@ the moment i'm studying the cpu block.
Quite finished..... then i will start with prototypes, i think in a month i have both!
Kam
Kamel
08-23-2005, 09:28 AM
http://web.tiscali.it/watercooler/NEP3DEF.JPG
This is what i mean.
bye
Kam
moonlightcheese
08-23-2005, 09:29 AM
it's... an RBX... lol
Kamel
08-23-2005, 10:43 AM
Yes, maybe similar, but not the same.... ;)
Kam
Bloody_Sorcerer
08-23-2005, 03:26 PM
i see a bunch of wavey looking channels in there... looks nice :-)
Kamel
08-23-2005, 04:14 PM
Really?
I've done wavey channels???? :eek:
;) ;)
Kam
lv_dicedealer
08-23-2005, 04:18 PM
Neat...
I know a lot of people feel very strongly that NB blocks are a waste, but for those ppl that want quiet then a NB fits the bill.
Make it fit SLi and make the mounting system lv_dicedealer-proof and you have a winning design
Mr. Manka
08-23-2005, 11:05 PM
ill buy one if its reasonably priced
as it will be going into the loop with my x850 PE w/ DD maze4
its looks kick A$$ and i bet its not too restrictive either
WeStSiDePLaYa
08-24-2005, 01:53 AM
wouldnt how those fins are alligned create almost no turbelence? wouldnt it be better if they ran the other way?
skycrane
08-24-2005, 04:42 PM
it looks great, and id love to have 1... or 2.... maybe a bit more :)
moonlightcheese
09-20-2005, 04:12 AM
whatever happened to this?
Kamel
09-20-2005, 04:16 AM
Workin on it guys, found a factory for production....
I should have prototipes soon..... waiting just as you all!
Bye
Kam
vkbms
09-20-2005, 05:52 AM
:slapass: ...Hurry up Kam!
FireDragon
09-20-2005, 06:24 AM
got any shots with the top off? Also iu have a design similer to ur NB block drawn in free hand...when i get better in inventor i will post up the pics for my cpu block nb block r520 blocks and ram blocks...they will all be on a chiller perhaps a cascade chiller
Also do you have any type of impregnation jets in the lexan top like the WW or just free flow into the channels?
Dragon
Jochenp
04-19-2006, 06:28 AM
Any updates?
Quazi
04-19-2006, 08:53 AM
It would be nice to see if he actually got this off the ground and into some type of production.
Kamel
04-19-2006, 09:31 AM
http://web.tiscali.it/watercooler/FCS/N11.JPG
Something is moving...after some troubles..
Finding a manufacturer was very very difficult...
This is Neptune...my cpu cooler!
Top and mounting system are "in progress"
bye
Kam
EnJoY
04-19-2006, 10:20 AM
Cool Kam. I can definately see a lot of room for improvement, but that just means you have a long product life ahead of you. Nice stuff. ;)
Kamel
04-19-2006, 10:55 AM
Sure...this is a base to work on !
I have some ideas to make it better ... but first i must test it!
Plus it's a little bit different from the original project..my fault with drafts!
well..now something is real and not only a draft....it's a starting point...
Kam