Lacrosseboss18
07-22-2005, 06:39 PM
I am getting TERRIBLE perfomance out of my setup. I dont know what to do to fix things. My Chip doesnt wanna stay stable at anything over those settings. My ram well its some of the best ram but im stuck and its working like ($@#Q$@
Can anyone suggest something to help me get better performace. Ive searched the forum and ive got much of these settings from what ive read.
System hardware
Board: DFI NF4 Lanparty UT nF4 Unltra-D
PSU: OCZ powerstream 520W
CPU: A64 3200+ (winchester); XP-90-C
Ram: G.Skill 1GBLE
Videocard: XFX 6800GT
HD: Hitc SATA II 80GB X 2
Here is my Bios Settings
MBM5 has be at cpu volt 1.58
FSB Bus Freq 239
LDT/FSB Ration X 3.0
LDT bus trans width 16/16
CPU FSB Ratio 10X
PCI E Freq 100 Mhz
cool and quiet Disabled
CPU VID start Value 1.550v
CPU VID control 1.325v
CPU special control 123%
Vddr: 2.7v
Tcl: 2.5
Trcd: 3
Tras: 6
Trp: 3
Trc: 12
Trfc: 14
Trrd: 2
Twr: 2
Twrt: 2
Trwt: 2
Tref: 3072
Twcl: 1
Bank int.: Enable
Skew control: 255 +
Drive strength: 7
Data strength: 2
Max. Async: 8ns
Read Preamble: 5ns
Idle Cycle: AUTO
Dyn. Counter: Enable
R/W Bypass: 16x
Bypass Max: 7x
32Bit Gran.: Disable
What do i need to fix to get better results
Thanks
Joseph
Can anyone suggest something to help me get better performace. Ive searched the forum and ive got much of these settings from what ive read.
System hardware
Board: DFI NF4 Lanparty UT nF4 Unltra-D
PSU: OCZ powerstream 520W
CPU: A64 3200+ (winchester); XP-90-C
Ram: G.Skill 1GBLE
Videocard: XFX 6800GT
HD: Hitc SATA II 80GB X 2
Here is my Bios Settings
MBM5 has be at cpu volt 1.58
FSB Bus Freq 239
LDT/FSB Ration X 3.0
LDT bus trans width 16/16
CPU FSB Ratio 10X
PCI E Freq 100 Mhz
cool and quiet Disabled
CPU VID start Value 1.550v
CPU VID control 1.325v
CPU special control 123%
Vddr: 2.7v
Tcl: 2.5
Trcd: 3
Tras: 6
Trp: 3
Trc: 12
Trfc: 14
Trrd: 2
Twr: 2
Twrt: 2
Trwt: 2
Tref: 3072
Twcl: 1
Bank int.: Enable
Skew control: 255 +
Drive strength: 7
Data strength: 2
Max. Async: 8ns
Read Preamble: 5ns
Idle Cycle: AUTO
Dyn. Counter: Enable
R/W Bypass: 16x
Bypass Max: 7x
32Bit Gran.: Disable
What do i need to fix to get better results
Thanks
Joseph