anything out thats ALOT faster than my EB?

[iboomalot]

this is my 3700EB fully stable

anything that could improve over what I have now and be worth spending the extra cashflow??

I do encoding and gaming mostly


DFI mobo for 939

[WeStSiDePLaYa]

this is my 3700EB fully stable

anything that could improve over what I have now and be worth spending the extra cashflow??

I do encoding and gaming mostly


DFI mobo for 939

dude, my 3500eb can toast that, feed them some volts and cool them down good. also your latency seems kinda slow. can we get a a64 tweaker ss?

[iboomalot]

I think they are at 3.1v now with a 120mm fan @ 7v on them

[HiJon89]

Try Trc to 7, Twr to 2, and Trtw to 2, should give a decent bandwidth boost.

[iboomalot]

Try Trc to 7, Twr to 2, and Trtw to 2, should give a decent bandwidth boost.

So anything that can boost me to 8500 - 9000 ??? Was thinking at 9000+ would be worth the extra $$$ for the added bandwidth

that helped some thanks

[brandinb]

for gaming and encoding with your cpu speed that ram is plenty fast i think
it all depends is 300 bucks worth 1-3% more performance??
________
WENDIE 99 (http://www.lovelywendie99.com/)

[WeStSiDePLaYa]

try these settings, work great for my EB, use cas3 instead of the 2.5 it shows.

http://xtremesystems.org/forums/attachment.php?attachmentid=34584&stc=1

[iboomalot]

for gaming and encoding with your cpu speed that ram is plenty fast i think
it all depends is 300 bucks worth 1-3% more performance??

good point


I plan on adding a 4400+ at the end of the summer and up my CPU from 2.55 to 2.85 which should increase more than 1-3% just wondering if the change of ram at that point would be worth it.

I don't think anything less than 9,000 mb/s isn't worth the price. IMO


dude, my 3500eb can toast that, feed them some volts and cool them down good. also your latency seems kinda slow.

what are your everest speeds?? ss ?

[iboomalot]

Got up to the 7300ish range stable but its right at the edge anything higher isn't 100% stable.

also got it to 42.9 ns on lat.

[SnipingWaste]

I have the much cheaper Buffalo dimm with micron -5B rev C and running 250HTT 2.5,2,2,5,T1 with 3.3V. Im running single Channle S754 3000+ with bandwidth just under 4000. Voltage does help but you must keep the chip temps under 65C with high voltage.

I was stuck with low profromes with 2.9V and did much better with 3.3V.

My mobo is realy cheap (SIS755) but can reach 268HTT for only $29 referbed for newegg so the ram can go much higher.

[brandinb]

with a dual core 4400 at 2.8 or higher i would get better ram and more of it!! i would get 2gb of some good clocking ram like ballistix or the new ocz 2gb kit
________
MAKE A VAPORIZER (http://howtomakeavaporizer.info/)

[brandinb]

42.9 ns latency seems bad as my centron budget 3200 at 215 3-3-2-7 with my cpu @ 2.8 get 43.5ns hehe my gskill get about 36ns i remember @ 315 2.5-3-3-6
________
Herbalaire (http://herbalairevaporizer.com/)

[WeStSiDePLaYa]

what are your everest speeds?? ss ?


at my summer 24/7 setting with 250 3-2-2-8 i get about 39.8 or so, depending how fast i run my cpu. have you tried the timmings i linked? i found those give best speed and bandwidth.