View Full Version : Ak35gtr
Hardass
05-01-2002, 05:18 PM
Anyone know what the diff is between version 1.1 and 2.2 is it just updated bios.
I think the 2.2 is the KT333 chipset.
Hardass
05-01-2002, 05:55 PM
I have a problem. I was trying to get more speed it won,t go over 150, so i put it back to 150 went to reboot and got boot disk error i put in win2k cd and it says setup cannot find hdd. Whats up.
Try to set it to the default multiplier/voltage/133 and reboot. If that doesn't work clear cmos.
Hardass
05-01-2002, 05:59 PM
Originally posted by JAWS
Try to set it to the default multiplier/voltage/133 and reboot. If that doesn't work clear cmos.
I did both same boot disk failure
Hardass
05-01-2002, 06:06 PM
Bios says there is no hdd. Is it possible hdd died
Where does it die during the boot process?
Hardass
05-01-2002, 06:41 PM
Originally posted by JAWS
Where does it die during the boot process?
It does the scan drives says no drives then stops and says boot disk failure.
Smizack
05-01-2002, 09:13 PM
Originally posted by hardass
It does the scan drives says no drives then stops and says boot disk failure.
Reseat the Hdd's. Power and IDE. I know it's basic but my soon to be linux machine does that from time to time. And the easiest thing is usually the most overlooked.
JBELL
05-01-2002, 09:27 PM
Originally posted by Smizack
Reseat the Hdd's. Power and IDE. I know it's basic but my soon to be linux machine does that from time to time. And the easiest thing is usually the most overlooked.
you mean doing a true "power cycle"
Smizack
05-01-2002, 09:48 PM
Originally posted by JBell
you mean doing a true "power cycle"
Pretty much... But in my case I get pi55ed, and threaten it for a bit. and..
*shakes fist!!
LOL!
:D
Hardass
05-02-2002, 02:46 AM
It was the hdd. Took one from rig2 it works.
oc jason
05-02-2002, 05:52 AM
i really doubt it was teh HD, running at 150 is not a prob. i get that BOOT DISK FAILURE from time to time and it also does not see HD. I just unpulg power connector from mobo and then take CMOS battery out and clear CMOS with jumper, also turn the PS off. It gives it no way to save info if the battery is out and the board is disconnected, then take out HD power and IDE and then plug it all back in and boot up.
ALWAYS works for me.
Hardass
05-02-2002, 05:57 AM
Originally posted by oc jason
i really doubt it was teh HD, running at 150 is not a prob. i get that BOOT DISK FAILURE from time to time and it also does not see HD. I just unpulg power connector from mobo and then take CMOS battery out and clear CMOS with jumper, also turn the PS off. It gives it no way to save info if the battery is out and the board is disconnected, then take out HD power and IDE and then plug it all back in and boot up.
ALWAYS works for me.
Then why when i put other hdd in it booted.