View Full Version : Max safe Vcore and Vmem for GF3 Ti500 ?
GreenBeret
12-21-2002, 05:58 PM
I've got a TI500 that can do 280/622 and I want to vmod it. What are the safe voltages I should get it to -> what resistors ? Many thanks :)
AndrOvr
12-21-2002, 06:42 PM
1Kohm pot.
Then mesure the vGPU... I wouldnt go much higher than 1.70 air cooled.
GreenBeret
12-21-2002, 06:50 PM
Originally posted by AndrOvr
1Kohm pot.
Then mesure the vGPU... I wouldnt go much higher than 1.70 air cooled.
Cool thanks. From the Xbitlabs formula: http://www.xbitlabs.com/video/titanium-overclocking/
it seems that I will get 1.69V with a 1K resistor. How do I measure the vGPU anyway ?
AndrOvr
12-21-2002, 07:09 PM
TOLD ;)
(ICQ)
macci
12-22-2002, 12:27 AM
Majority of the Ti500s come w/ a stock Vgpu of 1.66-1.7V so there is no need to do any GPU voltagemods. Of course you can try higher voltage but its most likely just waste of time :)
GreenBeret
12-22-2002, 06:00 AM
Originally posted by macci
Majority of the Ti500s come w/ a stock Vgpu of 1.66-1.7V so there is no need to do any GPU voltagemods. Of course you can try higher voltage but its most likely just waste of time :)
Oh I see.......thanks macci, that explains why I and 3 other friends didn't get any higher OC after volt-modding our cards (same MSI TI500) :/ Wonder why Xbitlabs says the reference card has 1.53 Vgpu :/ Oh well need to put a peltier on this card then :)
Cheers !