piotres
06-22-2005, 09:59 AM
Hello
Some weeks ago I have made my first DI run . That wasn't even only my first run, but there has been second official (I mean posted on forums) Dry-Ice benching in Poland . ;)
I had 1700+ JIUHB, ABIT NF7, 2x256 MB BH-6 and Codegen 400W PFC PSU :D .
http://www.szuwar.neostrada.pl/di/run1/1.jpg
I made my container of 50 cm lenght, 54 mm (2') cooper tube and cooper plate - 60x80x10 mm .
http://www.szuwar.neostrada.pl/di/run1/2.jpg
I have drilled some holes in baseplate with 8mm diameter bit.
http://www.szuwar.neostrada.pl/di/run1/3.jpg
Brazing . I used bronze sticks and Acetylene-oxy torch .
http://www.szuwar.neostrada.pl/di/run1/4.jpg
Container after cleaning.
http://www.szuwar.neostrada.pl/di/run1/5.jpg
Isulation was done, with neoprene - 9mm thick .
http://www.szuwar.neostrada.pl/di/run1/6.jpg
My rig :D . I was benching in a big hall :rofl:.
http://www.szuwar.neostrada.pl/di/run1/7.jpg
I picked a ice cube out from the box, which I prepared in home...normal box with styrofoam .
http://www.szuwar.neostrada.pl/di/run1/8.jpg
Breaking the block .
http://www.szuwar.neostrada.pl/di/run1/9.jpg
http://www.szuwar.neostrada.pl/di/run1/10.jpg
Pouring the ice and then acetone "pimp: .
http://www.szuwar.neostrada.pl/di/run1/11.jpg
I have thermomether for only -50*C :slapass: ...so the scale ended fast, and then never went onto mensuration scope :pimp: :wiggle: :banana2: .
http://www.szuwar.neostrada.pl/di/run1/12.jpg
http://www.szuwar.neostrada.pl/di/run1/13.jpg
OK...let's do some overclocking .. :p: :party2: ...
http://www.szuwar.neostrada.pl/di/run1/14.jpg
Ohh yeah :banana: I like my old 1700+ ...1466Mhz@ 3006 Mhz so 105 % o/c :rehab: .
http://www.szuwar.neostrada.pl/di/run1/15.jpg
http://www.szuwar.neostrada.pl/di/run1/16.jpg
http://www.szuwar.neostrada.pl/di/run1/17.jpg
Some SPI and Sandra 2003 screens @3006-3018 Mhz/2.20V :dj: .
Also new record SPI 16M in Poland on Socket A .. :woot: .
http://www.szuwar.neostrada.pl/di/run1/3214.jpg
Max suicide screen - 3214 mhz so 119% o/c ... not bad :p:
My mobo was geting crazy with that vcore..I think it was too cold :slap: ...real vcore was still 2.20 V :) .
http://www.szuwar.neostrada.pl/di/run1/18.jpg
The lowest temperature I could seen on the measure soft :hrhr: ..
http://www.szuwar.neostrada.pl/di/run1/19.jpg
OK it's time to end this crazy play... ;)
http://www.szuwar.neostrada.pl/di/run1/20.jpg
Some frost on mounting bolts :slobber: .
http://www.szuwar.neostrada.pl/di/run1/21.jpg
End of the party .. :toast:
http://www.szuwar.neostrada.pl/di/run1/22.jpg
Baking the NF7 ...ohh it was delicious :bounces: .
THE END
For next few weeks I plan next Socket A/Dry-Ice action ... this time on my friend's Barton 2500 +
Best Regards
Peter
Some weeks ago I have made my first DI run . That wasn't even only my first run, but there has been second official (I mean posted on forums) Dry-Ice benching in Poland . ;)
I had 1700+ JIUHB, ABIT NF7, 2x256 MB BH-6 and Codegen 400W PFC PSU :D .
http://www.szuwar.neostrada.pl/di/run1/1.jpg
I made my container of 50 cm lenght, 54 mm (2') cooper tube and cooper plate - 60x80x10 mm .
http://www.szuwar.neostrada.pl/di/run1/2.jpg
I have drilled some holes in baseplate with 8mm diameter bit.
http://www.szuwar.neostrada.pl/di/run1/3.jpg
Brazing . I used bronze sticks and Acetylene-oxy torch .
http://www.szuwar.neostrada.pl/di/run1/4.jpg
Container after cleaning.
http://www.szuwar.neostrada.pl/di/run1/5.jpg
Isulation was done, with neoprene - 9mm thick .
http://www.szuwar.neostrada.pl/di/run1/6.jpg
My rig :D . I was benching in a big hall :rofl:.
http://www.szuwar.neostrada.pl/di/run1/7.jpg
I picked a ice cube out from the box, which I prepared in home...normal box with styrofoam .
http://www.szuwar.neostrada.pl/di/run1/8.jpg
Breaking the block .
http://www.szuwar.neostrada.pl/di/run1/9.jpg
http://www.szuwar.neostrada.pl/di/run1/10.jpg
Pouring the ice and then acetone "pimp: .
http://www.szuwar.neostrada.pl/di/run1/11.jpg
I have thermomether for only -50*C :slapass: ...so the scale ended fast, and then never went onto mensuration scope :pimp: :wiggle: :banana2: .
http://www.szuwar.neostrada.pl/di/run1/12.jpg
http://www.szuwar.neostrada.pl/di/run1/13.jpg
OK...let's do some overclocking .. :p: :party2: ...
http://www.szuwar.neostrada.pl/di/run1/14.jpg
Ohh yeah :banana: I like my old 1700+ ...1466Mhz@ 3006 Mhz so 105 % o/c :rehab: .
http://www.szuwar.neostrada.pl/di/run1/15.jpg
http://www.szuwar.neostrada.pl/di/run1/16.jpg
http://www.szuwar.neostrada.pl/di/run1/17.jpg
Some SPI and Sandra 2003 screens @3006-3018 Mhz/2.20V :dj: .
Also new record SPI 16M in Poland on Socket A .. :woot: .
http://www.szuwar.neostrada.pl/di/run1/3214.jpg
Max suicide screen - 3214 mhz so 119% o/c ... not bad :p:
My mobo was geting crazy with that vcore..I think it was too cold :slap: ...real vcore was still 2.20 V :) .
http://www.szuwar.neostrada.pl/di/run1/18.jpg
The lowest temperature I could seen on the measure soft :hrhr: ..
http://www.szuwar.neostrada.pl/di/run1/19.jpg
OK it's time to end this crazy play... ;)
http://www.szuwar.neostrada.pl/di/run1/20.jpg
Some frost on mounting bolts :slobber: .
http://www.szuwar.neostrada.pl/di/run1/21.jpg
End of the party .. :toast:
http://www.szuwar.neostrada.pl/di/run1/22.jpg
Baking the NF7 ...ohh it was delicious :bounces: .
THE END
For next few weeks I plan next Socket A/Dry-Ice action ... this time on my friend's Barton 2500 +
Best Regards
Peter