Possible to reach DDR580 or DDR600 with TCCD`s?

[Ramguy]

Please let me know if someone knows, if it`s possible to reach DDR580 or DDR600 with 2X512 PC3200 TCCD`s, and what the brands and models. Thanks

[CTKP]

Take a look through here:
http://www.xtremesystems.org/forums/showthread.php?t=53290

[Ramguy]

Yeah, thanks. Your personal Recommendation would be: OCZ EL PC3200 Rev2, Kingston HyperX? I`m not decided yet, and I want to buy one of those.

[CTKP]

I have OCZ 3200 rev.2 and I really like it.

[GazC]

Be aware that when TCCD first came out there was less intensive speed-binning being done. I think it is far more likely that an "old" 3200 TCCD module will hit DDR600 than a new 3200 TCCD module due to the higher rated speed binning thats done now.

[dippyskoodlez]

Be aware that when TCCD first came out there was less intensive speed-binning being done. I think it is far more likely that an "old" 3200 TCCD module will hit DDR600 than a new 3200 TCCD module due to the higher rated speed binning thats done now.

Unless you buy the top end DDR600, focourse, which is what the binning would be doing.

My mushkin does DDR 600 pretty easy, and ill have a few more sticks to test in an hour or so. :)

[Minstadave]

My Gskill LDs (the lowest bin I think) do DDR580 rock stable.

[GazC]

Unless you buy the top end DDR600, focourse, which is what the binning would be doing.

My mushkin does DDR 600 pretty easy, and ill have a few more sticks to test in an hour or so. :)

yeah, but the thread starter was talking about PC3200 specced parts! :slap: :p:

[dippyskoodlez]

yeah, but the thread starter was talking about PC3200 specced parts! :slap: :p:

mine IS

The mushkin extreme performance 2-2-2 rev 2 has the BP pcb and does ddr600 for me. its Pc3200. It is GREEN PCB.

My friends BLACK LEVEL II has a black mushkin PCB and will not do 300. It is NOT BP. stops around 270-280.

[GazC]

mine IS

The mushkin extreme performance 2-2-2 rev 2 has the BP pcb and does ddr600 for me. its Pc3200. It is GREEN PCB.

My friends BLACK LEVEL II has a black mushkin PCB and will not do 300. It is NOT BP. stops around 270-280.

I see, when did you buy it (don't know when rev.2 came out) ?

[gundamit]

Unless you buy the top end DDR600, of course, which is what the binning would be doing. Its funny. The OCZ PC3200 Plat. Rev.2 I picked up in January will do DDR600 2.5-4-3 and it cost about the same as the current OCZ PC4800. In January getting DDR600 was a crap shoot. Now it guaranteed! The current $190 PC3200 Plat. rev.2 vs. $260 PC4800. $70 premium for a guarantee seems reasonable.

[dippyskoodlez]

I see, when did you buy it (don't know when rev.2 came out) ?

I bought it beginging ot this month... its the "eXtreme performance 2-2-2" not Black Level II. BLII isnt BP pcb.

This has a nice BP pcb, but my stick wont do 2-2-2. 2.5-3-3-7 does ddr600 in memtest just fine, however. :stick:

[GazC]

I bought it beginging ot this month... its the "eXtreme performance 2-2-2" not Black Level II. BLII isnt BP pcb.

This has a nice BP pcb, but my stick wont do 2-2-2. 2.5-3-3-7 does ddr600 in memtest just fine, however. :stick:

Strange, I'm gladd your getting high clocks from it. The first lot of Mushkin TCCD didn't seem all that hot from the results I'd seen. :clap:

[Ramguy]

Ok. Than my choice will be the Ocz Rev2.

[Ramguy]

And something important, that I forgot to write. If they hit DDR 580-600 with 2X512MB in Dual Channel mode. Sorry for the inconvenience :(

[Lithan]

Hell I had New TCCD that did 290 2.5-3-2-7 1t with 2.8 volts and I had to sell them for a LOSS, apparently the recent TCCD chips do really well.

[ChongL]

I have some tccd coming in...hoping it does close to 300

[dexx]

I imagine most TCCD could do DDR600 if you relaxed the timing enough. Eg 4-5-5-10

[haPpydUde]

Ahh, go with the rev.2, One stick of mine just died, shame cause 300 2.5-3-3-8 with 2.5v was no problem for the set.

[Ramguy]

What about CENTON ADVANCED DDR the Gemeni dual kit? Anybody knows about it?