Potentially too much load?

[marvt74]

I've got the enermax 600w noisetaker with about 40A on the 12v line (14,14,12 i think)

Now as for hardware wise

A64 clocked to around 3ghz at 1.8v
dfi nf4 ultra-d
2x512mb ocz 3200 tccd @ 2.9v
x850-xtpe
couple of fans
The prommie is connected but dont think that has much influence

But then i'm adding a 172w pelt at 12v so about 100w there and the csystems pump which will be an extra 20w or so. And then 2 120mm fans on the rad.

Its all just seems too much especially with the pelt but i cant really afford a meanwell.

I'm guessing it will be alright but if psu's are most efficient at 75% this could take it well over that

[AKURA]

I think your noisetaker could handle all that. The cpu has it's own dedicated line which is the first 14amp, then just make sure the second 14amp will only be use with the peltier. For the 12amp you can use it to power your drives, fans etc.......I'm confident it'll make it :D :toast: