PDA

View Full Version : The Official San Diego Overclocking Thread



Pages : [1] 2 3

conrad.maranan
04-13-2005, 06:06 PM
In an effort to maintain the orderliness of the AMD section, I am requesting that all San Diego overclocking results be placed in this official thread. Please refrain from starting a new thread to highlight your overclocking results. If you feel that your overclocking efforts are beyond average and worthy of an individualized thread, please consider doing so in the Xtreme Overclocking section.

We do not need 1,000 new threads on the same topic. Look at what my San Diego can do!...San Diego 4000+ OC Fun...My San Diego hits 3000MHz on air...Mr. Forum Member's Mega San Diego OC Thread...The San Diego/H2O OC action thread... You get the picture.

If you wish to start a thread with regard to the San Diego core which also includes some other issues, dilemmas, questions, and/or concerns that have not been mentioned elsewhere, please feel free to do so.

Your cooperation with regard to this matter allows for a much more organized and systematic way to share information. Yes, this is a group effort. ;)

I will open this thread as soon as a forum member sends me (or any of the AMD section moderators) a PM stating that he/she is ready to share some results.



RULES FOR POSTING IN THIS THREAD
This thread is strictly for overclocking results with a San Diego core processor. Overclocking results must include at least one screenshot along with specific details regarding your accomplishment. This includes, but is not limited to, the following data:

- Stepping and/or CPU Assembly Date
- VCORE
- Method of Cooling
- Temperatures (Software-based or Meter-derived)
- Specifications of System
- Stability Tests (SuperPi, Prime95, 3DMark, etc.)

INQUIRIES:
Data Requests - If you have any requests for additional tests or details to be included in a post, please send a PM to the author of the post to include the information you are seeking. Be sure to include the "post #" or a direct link to the post you wish to see edited.
Data Fulfillment - If you (author of a post) receive a PM from a forum member requesting for additional information regarding your test data, kindly consider editing your post to include the requested information.

Discipl3
04-26-2005, 07:56 PM
Picked one of these in Akihabara, Tokyo. It was only 36000 yen so I couldnt refuse.

cpu reads:

ADA3700DAA5BN
CABGE0512XPMW
1230198C50032

The results are as follows:

It does 270x10 on stock volts, and 254x11 on 1.55v on air (zalman CNPS 7000b-cu). My memory wont do 280x10 (its corsair 2x512 xms4400c25p, 275 is the max:() so im happy with 275x10 for now. My super pi times seem a little off, compared to the 3800+ at the same speed but I think that this test dosent rightly reflect the 1mb cache.

Concidering the price this has got to be the best value chip out at the moment, It easy did 2.6ghz (fx55) but has the added value of sse3 instructions as well.

http://img243.echo.cx/img243/372/370038nv.jpg

http://img97.echo.cx/img97/8956/cpuarith2kz.jpg

http://img97.echo.cx/img97/9481/membandwidth0sr.jpg

cpulloverclock
04-27-2005, 10:07 AM
same proc

http://angel.ap.teacup.com/maiko/

cpulloverclock
04-27-2005, 11:05 PM
fred is testin' a 3700+ 0512XPMW

263.38 x 11=2,897.17 @1.536Vcore with a XP90

http://premium1.uploadit.org/fredyama//DFI3700-SD-2897.gif

cpulloverclock
04-29-2005, 02:14 PM
a few screenies

-300mb/s at sandra and everest in comparison with my 3000+ at same frequency and fsb...

that would give 100MHz+ with my new dod...

http://cpull.free.fr/Overclocking/AMD%2028GP-28.391.jpg

max 1M at 3215MHz but bad time cuz maxmem didnt help
http://cpull.free.fr/Overclocking/3206MHz-superpi-25.438.jpg

http://cpull.free.fr/Overclocking/3178MHz-superpi-4m51s.jpg

http://cpull.free.fr/Overclocking/3155MHz-cpumark-416.jpg

tearing, yup, weird, sometimes that just do it, problem between the 4000+ and dfi nF4??, same thing on air
http://cpull.free.fr/Overclocking/3269MHz-cpumark-431.jpg

http://cpull.free.fr/Overclocking/3187MHz-pifast-37.11.jpg

http://cpull.free.fr/Overclocking/Everest-memory%20latency-31.3ns.jpg

http://cpull.free.fr/Overclocking/Max%20screen-3433MHz.jpg

JNav89GT
05-01-2005, 09:56 AM
Well obtained a 4000+ San Diego

Seems to run a touch warm on stock cooler, but under an XP-120 and strong fan things are good.

CPU-Z doesn't pick up correct frequency nor does Windows, so I have to use Clock Gen to show freq's

See pics below. Was tasked running other testing for days, so this is first day I've had it in an actual OS ;)

Memory is Mushkin Reline PC4000 btw :toast:

JNav89GT
05-01-2005, 10:20 AM
yeah it's set to 1.45v in bios
here's one at 1.475 I think

btw clock gen won't set anything else, just locks up with this setup
and sorry, but I can't fit much on screen as I'm working on 5th system and using old ibm 17" crt :(

JNav89GT
05-01-2005, 10:32 AM
lol
just running 1mb as a quick and dirty test
here's another to infuriate you
will test 3dmark in a sec

JNav89GT
05-01-2005, 10:40 AM
ok 265x11 3dmark per Bachus's demands :p:
6600gt stock clocks

JNav89GT
05-01-2005, 04:07 PM
the money shot ;)

cpulloverclock
05-02-2005, 07:07 AM
I can improve with my actual cooling

http://cpull.free.fr/Overclocking/3151-metabench-6394.jpg

http://cpull.free.fr/Overclocking/3160-Xtest%202003-26.14.jpg

http://cpull.free.fr/Overclocking/3178MHz-pifast-185.11.jpg

http://cpull.free.fr/Overclocking/3206-pifast-37.00.jpg

http://cpull.free.fr/Overclocking/3242MHz-ecalc-1.26.24.jpg

http://cpull.free.fr/Overclocking/3242MHz-fpumark-18822.355.jpg

http://cpull.free.fr/Overclocking/3351MHz-cpumark-440.jpg

http://cpull.free.fr/Overclocking/3201MHz-superpi%20patched-24.593.jpg

http://cpull.free.fr/Overclocking/3251MHz-superpi%20japanese-25.062.jpg

http://cpull.free.fr/Overclocking/3251MHz-cpu%20benchmark-14566-6970.jpg

http://cpull.free.fr/Overclocking/3260MHz-cpu%20benchmark-14774-6918.jpg

http://cpull.free.fr/Overclocking/3269MHz-cpu%20benchmark-14778-6904.jpg

http://cpull.free.fr/Overclocking/3260MHz-cpu%20multimedia-31155-33604.jpg

http://cpull.free.fr/Overclocking/AMD%2028GP-28.343.jpg

http://cpull.free.fr/Overclocking/AMD%2024GP.jpg

http://cpull.free.fr/Overclocking/Screen-3451MHz.jpg

JonEapples
05-02-2005, 09:33 PM
ADA3700DAA5BN
CABGE 0515VPMW
1239326D500xx

Having fun breaking it in, prime stable at these settings: :bananal:
Rig in sig
271x10 @1.40 Vcore
Ram @ 225.8MHz @2.70Vdimm 2-2-2-6 1T(set 1T using A64 tweaker due to Neo2+Sandy bug)

http://img181.echo.cx/img181/4720/sandy104kj.th.jpg (http://img181.echo.cx/my.php?image=sandy104kj.jpg)

I will update this post with future results :surf:

charlie
05-02-2005, 10:42 PM
filthy, stinkin' fast ;)

0515SPMW 4000+
CoolerMaster Hyper6 w/lowspeed 80mm fan
DFI Ultra-D "SLI Mod"
MUSHKIN Redline XP4000
OCZ Powerstream 520W
BBATI X800XL

OH, and don't believe CPU-Z that's only default voltage + 4%!!!

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29689

I'd like to take a sec here, and talk about this CPU. With all the uproar about the "cold bug", I'd like to make a couple notes: this CPU is really fast... I ran some 3D last night, no Ricky tweak @ 2880, 430/560 on the x800xl and I beat my OLD "high" by 500 points. The old config included MUCH higher clocks on the GPU, and the SD just SMOKED it. The #1 '01 score above mine is with a Winny at 3100mHz++ and I already beat his Lobbies at only 2880. After playing for a day, I believe it's faster than FX55 clock for clock... no proof, just a feeling I get. Next question is how it will do on single phase change, if it'll do "near" cascade speed, maybe 3500mHz, it'll give the 130nM FX's a run for their money!

C

EQuito
05-02-2005, 10:51 PM
I got mine from Monarch today (0514SPMW).
I'm sure in the right hands and with better cooling this chip can do better but this is all got so far:

JNav89GT
05-03-2005, 10:48 AM
Bacchus is going to kill me
but wanted to tell peepsl that my 4000+ is going strong on modded mach1

liking this dfi, A64 4000+ diego, Redline comob ;)

maxoverclock
05-03-2005, 11:10 AM
got my 4000+ SD this morning.......

stable as a rock right now. don't have any memory to run 1:1 so running with a divider. still smokin fast.....my fx-55 could only do 2860 @ 1.7V and topped out at 50c under load. the 4000+ so far @1.65V is topping at 100 faster and the temp is 10c cooler under load @ 40c. i'll pump some more volts into it to see if it can go faster in a couple of days....so far so good. glad i've sold my fx.

max

JNav89GT
05-03-2005, 11:17 AM
this shot is for Bacchus ;)
j/k but nice to run SuperPi 32M 1:1 memory super tight timings w/Redline 4000 @3.5V, Diego is about 3-5C lower on evap temps compared to my older 4000+ core running same speeds, but of course Diego taking ALOT less voltage at 1.535 vs 1.83 v

I was able to get 3300mhz stable through super pi 32M, was actually a touch slower than my 32xx run as I was runnning 1:1 memory there, and I had to drop memory divider down to explore limits of cpu for my 3300mhz run. Past 3300mhz I haven't had any 32M luck. Might need to really start pushing vcore which I'm a bit leary about. 3300MHz suspected stable is awesome IMO, on a regular single stage phase change setup.

EQuito
05-03-2005, 11:22 AM
I made some progress by lowering the timings... :D

computersmsa
05-03-2005, 11:34 AM
http://www.bel-hardware.be/SD4000/SD4000+_s.jpg

Stable
1.4V -> http://www.bel-hardware.be/SD4000/PC_MS_1.4V.PNG
1.5V -> http://www.bel-hardware.be/SD4000/PC_MS_1.5V.PNG
1.55V -> http://www.bel-hardware.be/SD4000/WCM_MS_1.55V.PNG

Bench
SPI 1M -> http://www.bel-hardware.be/SD4000/SPI1M_3118.PNG
SPI 4M & CPUM99 -> http://www.bel-hardware.be/SD4000/SPI4M_CPUM_3G.PNG

Nettwerk
05-03-2005, 04:37 PM
SD 4000+ CABHE 0515SPMW

2950 is the max on this chip.. no 3ghz for me this year I guess :/
Ive been messing with it all day today and I dunno the lowest voltage for it so I set it to 1.65. heres a few shots from messing with it, still got alot of work.

http://home.houston.rr.com/nettwerk/sandeigo/265x11.JPG

EQuito
05-03-2005, 06:53 PM
Some BH5 action...

charlie
05-03-2005, 11:37 PM
Here's my results.... not bad, but my session simply reminds me how much I need to switch over to phase change :(
CPU temp -6C to -10C, Base temp as low as -58C, booted just fine.

DFI LP Ultra-D "SLI Mod"
4000+
MUSHKIN Redline XP4000
OCZ Powerstream 520W
BBATI X800XL

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29741

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29743

B5I8
05-04-2005, 08:52 AM
Has anyone ran some real stability tests with their overclock?

http://home.hawaii.rr.com/b5i8/2749Prime.jpg
Sorry, I didn't read the rules. This is a 4000+ 0515 SPMW from Monarch.

mcbarnet007
05-05-2005, 06:42 PM
After I remove the IHS I gain another 100mhz. Here is the result. Cooling is in sig. CABGE 0515VPMW serial end in 472. Voltage is 1.65v. Had to run UTT in dividor, else score would be better.

Faceless Rebel
05-05-2005, 07:37 PM
San Diego 3700+
ADA3700DAA5BN
CABGE 0515VPMW
1239326D504xx

2750@1.55W
Prime Stable
3DMark 05/03/2001 Stable
http://students.washington.edu/lzone/prime2750.jpg

other stuff:
Zalman CNPS-7000Cu (idle: 39C, load: 48C)
MSI K8N Neo4 Platinum
GF 6800GT @400/1100
Antec TrueControl 550 (+12V 24A)

Crazykooter
05-06-2005, 05:53 AM
Stepping:
ADA3700DAA5BN
CABGE 0515VPMW
1239326D50501

I get around 32c idle and 42-43c load on DangerDen water cooling.
I have run 3dmark05 and 01 both without issues till my ram went to crud on me. Here is some quick benches just for show. Nice cpu very fast with 1mg L2. Will be nice to see what steppings do what here in the next few months. Not sure bout the memory controllers on these things tho. I think they may be on the picky side.

http://img83.echo.cx/img83/8605/29158uq.th.jpg (http://img83.echo.cx/my.php?image=29158uq.jpg)

A64 San Diego 3700+
DFI Lanparty UT NF4
1 gig of Mushkin PC3200 Tccd
X850XL@690/650 volt modded
Audigy 2 Value
Antec 550 True control PSU(Garbage)

RAMMIE
05-06-2005, 03:21 PM
I like!

Wingz
05-06-2005, 05:42 PM
http://www.hvweb.co.uk/wingz/3700.jpg

RAMMIE
05-06-2005, 05:52 PM
better

OCfreak
05-06-2005, 06:24 PM
Prime Stable 12hrs at 2805

http://webpages.charter.net/robert4177/2629


Best boot to windows(not stable)

2906 CPU-Z verified (http://valid.x86-secret.com/show_oc?id=16207)

3700+
CABGE 0515 VPMW
Asus A8N-SLI deluxe rev 1.03 bios 1007
255 x 11 = 2805mhz 1.55v
RAM @ 215mhz 2-2-2-5 2.80v
HTT multi 3x
Thermaltake Silent Tower heatpipe CL-P0025

Eldonko
05-08-2005, 05:50 PM
- 3700+ E4 CABGE - 2810Mhz
- VCORE: 1.65v (CPU-Z showing incorrect voltage)
- Method of Cooling: H20
- Temperatures: 29-45C
- Specifications of System - in sig
- Stability Tests: SuperPI 32M, 3Dmark 01 and 05, 2 days of EQ2.

http://members.shaw.ca/Eldonko/z5.JPG

Saftlad
05-09-2005, 10:11 AM
Stable

http://www.theqbs.com/swampy/prime.jpg

Best 1mbSuper PI

http://www.theqbs.com/swampy/3300mhz.jpg

Dont know how many volts I dare put through this.

Dumo
05-09-2005, 07:23 PM
Best 1mbSuper PI

http://www.theqbs.com/swampy/3300mhz.jpg

Dont know how many volts I dare put through this.Compared to fx

ben805
05-09-2005, 11:15 PM
ADA3700DAA5BN
CABGE 0515 SPMW
Boxed Version from Monarch.

This chip is smoking hot, under load temperature shoot all the way up to 58~60'C and idle at around 36'C, I remount the heatsink twice with the same result, XP-90 is running on its last garlic fried chicken legs so it has got to go, can't wait to receive my single stage phase change to run this puppy on!

BTW, I don't have any problem to run it on any multiplier, it can be 11X, 10X, or 9X.....have the 414-3 BIOS.

:flame:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30129

t-max
05-10-2005, 01:00 AM
Here is my sandiego
3700+
0515 SPMW

it does 25 sek in superpi 1M easyly whit no patch and no tweaks at all
the memcontroller runs my g.skill easely at 310 mhz 2.5,4,3,6 1T with no futher tweaks.

And above 15K i cpu aritemiks freakin awsome :p:

this cpu is amasing :banana: i´m in love....

Edit just made a run at 24 sek 1M superpi at 3372 mhz

G H Z
05-10-2005, 11:33 AM
0515 SPMW
-58° Baker custom
Ultra-D
Bios 414.3

Apparently I need more voltage;)

http://img.photobucket.com/albums/v31/canny/FullPI3180Mhz.jpg

Note: 25sec run is from FX-55

cpulloverclock
05-10-2005, 01:06 PM
http://cpull.free.fr/Overclocking/3178MHz-Xtest%202003-26.05.jpg
http://cpull.free.fr/Overclocking/3215MHz-superpi-4m45.jpg
http://cpull.free.fr/Overclocking/3278MHz-cpu%20benchmark-14932-6968.jpg
http://cpull.free.fr/Overclocking/3242MHz-superpi-25.219.jpg
http://cpull.free.fr/Overclocking/3260MHz-superpi%20japanese-25.015.jpg

with SSE3 patched version I get 23.9 at 3260MHz

MsB
05-10-2005, 02:45 PM
Just got my 4000+ today this is the best this rig can muster. Need better memory for better pi.
https://home.comcast.net/~msbmeaner/images/screentwo.JPG
https://home.comcast.net/~msbmeaner/images/screenone.JPG
Im a forums noob hope this stuff shows up need too figure out how to post pics right in thread DOH!
ok pi is wrong it was 2t mem heres new pi @ 1t
https://home.comcast.net/~msbmeaner/images/pi2t.JPG

jikdoc
05-10-2005, 06:03 PM
3700+ CABGE 0515 SPMW
stock vapoLS
dfi nf4 sli-dr
twinmoss utt
292x11 5:6 divider
cpu 3201 mem 229
vcore 1.72, vdimm 3.2

spi 1m @ 3301 25.8 loose timings (2226 7-15-2-2-1-2-1 16x-7x-7ns-5ns-256-disable)
spi 1m @ 3288 25.4 tight timings (2226 7-14-2-2-1-2-1 16x-7x-7ns-4ns-16-enable)
spi 8m @ 3257 4:49
spi 32m @ 3201 23:28 loose timings (see above)
spi 32m @ 3201 23:21 tight timings (see above)

compared with fx55 @ 3211, 1:1 utt @ 247
spi 32m 23:39
spi 1m @ 3276 ~ 25.?? (old version cpuz)

overall, this is my favorite chip since my 3200 winnie 0433 spmw, ironically this 3700 SD is also spmw.

RAMMIE
05-10-2005, 07:44 PM
Some old RAM I pulled out of the junk drawer.
http://webpages.charter.net/mlanter/melco.jpg

DFI ULTRA D
vapo ls
OCZ PowerStream 520

AKRedneck
05-10-2005, 10:14 PM
- 3700+ CABGE 0515SPMW
- 1.73V
- Prometeia Mach1 (Stock)
- MSI K8N Neo2
- Took memory out of the equation. 3250 maybe possible with more Vcore. Is 1.8v safe? Should the IHS come off? :D

easypanic
05-11-2005, 06:49 AM
http://www.easypanic.be/28mem.JPG

with this core:

http://www.easypanic.be/cpu.jpg

Achieved with watercooling, load temp +-45°C :)

peter lu
05-11-2005, 10:13 AM
DFI ULTRA-D
3700+(0516)
TCCD 256*2
XP90(air cooler)

http://img1.picsplace.to/img1/2032/a_000.JPG

cpulloverclock
05-11-2005, 02:24 PM
http://cpull.free.fr/Overclocking/3197MHz-Xtest%202003-25.56.jpg

http://cpull.free.fr/Overclocking/3251MHz-fpumark-18869.084.jpg


too bad those scores
http://cpull.free.fr/Overclocking/3287MHz-cpu%20benchmark-14997-7017.jpg
http://cpull.free.fr/Overclocking/3315MHz-cpu%20benchmark-14966-7094.jpg

http://cpull.free.fr/Overclocking/3315MHz-cpu%20multimedia-31587-34069.jpg

http://cpull.free.fr/Overclocking/3224MHz-pifast%2010M-36.75.jpg

Ryan45
05-11-2005, 05:55 PM
The chip
http://img224.echo.cx/img224/2016/sandy2753do.jpg

This is at 1.45 Volts. Pretty good but my ram is running Async at 5:6 :argue:
http://img173.echo.cx/img173/7247/275sandy1lt.jpg



Here is the suicide clock. Boots into windows and runs 1M Super PI
2860 @ 1.55V
http://img135.echo.cx/img135/7601/sandy28605cg.jpg

Iggk
05-11-2005, 06:13 PM
ADA3700DAA5BN
CABGE 0512XPMW
1230198C509**
http://img101.echo.cx/img101/4117/32g276superpi2dw.jpg

got 1m superpi running at 305x11 but condensation got the best of my DFI- R.I.P
hopefully the replacment will perform as well.

Sucka
05-11-2005, 07:15 PM
Just got mine in a few minutes ago, will update. Seems nice so far.

http://suckasd.com/computer/sandiego/25sec.jpg

http://valid.x86-secret.com/show_oc?id=17360

joe2004
05-11-2005, 09:34 PM
3700 retail. Air cooled XP-120.

peter lu
05-12-2005, 04:54 AM
DFI ULTRA-D
3700+(0516)
TCCD 256*2
XP90(air cooler)


http://img1.picsplace.to/img1/2042/e.JPG

http://img1.picsplace.to/img1/2042/f.JPG

GregP24
05-12-2005, 05:32 AM
DFI Ultra-D
2x512mb OCZ VX@3.6v
Eheim 1250/DD RBX/2x120mm D-Tek 120mm Pro w/90CFM fans(gpu is also cooled in this loop)

I forgot to look up the stepping before I slapped it in - was too excited.

soul
05-12-2005, 07:24 PM
http://www.epicoftimewasted.com/images/SanDiego01.jpg

Just warming up with 10x270 at 1.55 volts, memory at 245 2-2-2-2 with 3.5 volts. Rest of the specs are in my sig. I'm sure I can get some more out of it...

Temps never go above 40C, except for that damned chipset. Stupid 6800GT is exhausting right into the chipset fan until UPS shows up tomorrow.

ante_ante
05-12-2005, 10:40 PM
Here is a fast test. More to come =)

Stepping:
ADA3700DAA5BN
CABGE 0515SPMW

http://upl.silentwhisper.net/uplfolders/upload3/260x11.jpg

BigBen
05-13-2005, 12:00 AM
http://valid.x86-secret.com/show_oc?id=17461

peter lu
05-13-2005, 03:33 AM
Peter:

I am really confused how you managed those temps under load b/c myself, and many others "air-cooled" are seeing much higher temps. I average 45-48C under load and that is only 1.55V @ 2.69ghz.

My chip is a complete POS, it will do 2.75ghz but the machine shuts off for no apparent reason. I assume heat b/c it hovers 48-50C under load :( This is with an Xp-90 and a 92mm Tornado+7 case fans. Ridiculious...

I no case. and the temp under load is:
http://img1.picsplace.to/img1/2052/ak.jpg

SIOUX
05-13-2005, 11:26 AM
The pics speak for them selves:) I love this chip...

Tests with untweaked Win XP. will do some series win2k testing tonight:)

cpulloverclock
05-13-2005, 02:31 PM
in 1 day 90MHz+
weird
http://cpull.free.fr/Overclocking/3278MHz-Xtest%202003-25.16.jpg

patriot71
05-13-2005, 09:47 PM
I have had this guy in my computer for about 4 hours now. 2.9ghz SPi 32m stable. I am going to shoot for 3.0. This is on air but I will admit it is about 55 ambient right now. This is about what I am expecting once I get my water cooling up.

http://img172.echo.cx/img172/3200/2900mhzspi32mstable1wo.th.jpg (http://img172.echo.cx/my.php?image=2900mhzspi32mstable1wo.jpg)

cpulloverclock
05-14-2005, 01:37 PM
http://cpull.free.fr/Overclocking/3160MHz-Occt.jpg
http://cpull.free.fr/Overclocking/3160MHz-Occt%20core%20voltage.jpg
http://cpull.free.fr/Overclocking/3160MHz-Occt%20cpu%20temperature.jpg
http://cpull.free.fr/Overclocking/3315MHz-cpu%20benchmark-15169.jpg

better frequency and time tomorrow
http://cpull.free.fr/Overclocking/3142MHz-superpi-23m05.jpg
http://cpull.free.fr/Overclocking/3296MHz-Xtest%202003-25.09.jpg

jikdoc
05-14-2005, 05:03 PM
@cpulloverclock
i've got almost identical results as you. pass occt at 3.17 (fx55 passed occt at 3.16) on vapoLS. i'm on SD3700 with 2x512 twinmoss utt. only difference is that i'm at 5:6 divider and your on 1:1. truly impressive results there.
i was able to pass 32m at 3.2; with your ram, i bet you can get down to 21min or low 22min.
i could really a 13x multi (i miss the fx55) since i'm stuck on the 3.3 rail with dfi (zippy incompatibility)

agenda2005
05-14-2005, 08:20 PM
Chip is from Monarch

ADA3700DAA5BN
CABGE 0515 SPMW

Set up
MB DFI Ultra-D with 310 Official Bios
Memory :GSkill LE PC 4400 at 246MHz 2.5-3-3-7
Cooling: Thermalright XP-120 with 120mm Panaflo at 110cfm
GFX: eVGA 6600GT at stock speed
Room Temperature : 29.4C

cpulloverclock
05-15-2005, 12:07 AM
@cpulloverclock
i've got almost identical results as you. pass occt at 3.17 (fx55 passed occt at 3.16) on vapoLS. i'm on SD3700 with 2x512 twinmoss utt. only difference is that i'm at 5:6 divider and your on 1:1. truly impressive results there.
i was able to pass 32m at 3.2; with your ram, i bet you can get down to 21min or low 22min.
i could really a 13x multi (i miss the fx55) since i'm stuck on the 3.3 rail with dfi (zippy incompatibility)
yep, my vapochill PE modded has a compressor of 159W and it's too small but I try to help the original condenser (my dod) with full of fans, R22 gas helps a little...

the new dod will be better

4kw scroll compressor, a very big condenser and evapo

a friend has a 40kw :p:

saiamne
05-15-2005, 12:32 AM
I know...I should've condensed things and SS'd multiple benches at once...oh well, shoot me...also forgot to SS my priming on these settings yesterday

Spent most of this evening working on overclocking and doing some WinXP tweaking...not terribly extensive, but it probably helps a little bit...

Used my previously Prime95 tested settings for the benches (passed 4+ hours yesterday before I got bored of messing around with my old computer and stopped it)

1.45 vCore
260x11
1.5-2-2-8 @ 3.4vDimm
OC'd my 6800GT a little up to 420/1150 (probably need to flash up to an Ultra BIOS to get more out of it)

well...without further ado here's some pictures of my progress thus-far

http://i6.photobucket.com/albums/y220/saiamne/CPUZ1.jpg
http://i6.photobucket.com/albums/y220/saiamne/CPUZ2.jpg
http://i6.photobucket.com/albums/y220/saiamne/Aquamark.jpg
http://i6.photobucket.com/albums/y220/saiamne/3DM01.jpg
http://i6.photobucket.com/albums/y220/saiamne/3DM03.jpg
http://i6.photobucket.com/albums/y220/saiamne/3DM05.jpg
http://i6.photobucket.com/albums/y220/saiamne/SuperPI.jpg
http://i6.photobucket.com/albums/y220/saiamne/SiSoftSandra.jpg

And a couple barely stable (read: websurfing, no gaming) highest speed Screenshots...got a bit higher than these, however much beyond these Screenies I couldn't even jump around in Firefox

http://i6.photobucket.com/albums/y220/saiamne/TopCPUZ1.jpg
http://i6.photobucket.com/albums/y220/saiamne/TopCPUZ2.jpg

I think my 3DMark scores are a little below average...is there any tweaking I should do to improve them?

Without any major memory tweaking the 2860 is about the max my CPU wants to do regardless of vCore...it's happy where I have it now...it wants 1.55v+ into the 2.9's, and 1.6+v just to mess around at 3ghz, past that I did 1.7v but backed down quickly...temps were still good, but I'm really leery of going that high on a 90nm chip regardless of temps (if I remember off the top of my head the 2860 I'm doing 1.3v LDT, and 1.5v Chipset...needed to max those both for the 3ghz)

Would appreciate it if someone could PM me with some memory settings to try out...mostly on "auto" settings right now since they seemed to work better for me than the 2 full settings I tried loading out

fagin
05-15-2005, 03:05 AM
Just did some quick testing on a cheapo Gigabyte K8NF9 board while waiting for a new DFI NF4 board to arrive.Stock HSF and stock volts, in an enclosed case with an intake fan, but no exhaust fan! Don't ask!

Using OCZ 3700 Gold rev 3, as no point putting BH6 in this MB.

1.4v is good for 2.7, 1.5v for 2800. I can't wait to get this in my DFI board, and playing in the cold!

I know its not the biggest O/C in the world - but on a stock HSF, priming at 1.4v? I'm impressed!

CPU-Z Validation: http://valid.x86-secret.com/show_oc.php?id=17747

http://premium1.uploadit.org/glorfy//3700sandyprime.jpg

peter lu
05-15-2005, 06:56 AM
sandiego 3700+

1.4v oc 2.78G(PRIME 95)

http://img1.picsplace.to/img1/2072/b2.jpg

PicaXuu
05-15-2005, 08:38 AM
Here are my results, rock stable !

San Diego 3700+
CABGE 0515SPMW
DFI SLI-DR @ 510-3
Gskill 4800 FF
CPU & chipset watercooled

http://www.cyclopnet.pt/~nsl69249/dfifinal1.jpg

maxxxpct
05-15-2005, 11:27 AM
this e' our temporary result. unfortunately the motherboard it does not know them beyond the 310 of fsb. the cpu instead it does not appreciate inferior temperatures to -40°
http://img60.echo.cx/img60/4623/screenshark3400mhz2hl.jpg
maxxx& alex-ta & freezilla& dragonx21

cpulloverclock
05-15-2005, 01:09 PM
I've used a radeon 7000 PCI for crystalmark and testlab :D

unpatched superpi
http://cpull.free.fr/Overclocking/3160MHz-superpi-22m56.jpg
http://cpull.free.fr/Overclocking/3088MHz-rightmark.jpg
http://cpull.free.fr/Overclocking/3105MHz-testlab-2118.jpg
http://cpull.free.fr/Overclocking/3196MHz-renderbench-3m17.jpg
http://cpull.free.fr/Overclocking/3205MHz-cinebench-57.8.jpg
http://cpull.free.fr/Overclocking/3215MHz-crystalmark-51670.jpg
http://cpull.free.fr/Overclocking/3242MHz-sciencemark-1615.88.jpg
http://cpull.free.fr/Overclocking/3242MHz-testlab-434.jpg
http://cpull.free.fr/Overclocking/3278MHz-testlab-458.jpg

31 mp3 files and a total of 265MB
http://cpull.free.fr/Overclocking/3278MHz-winrar-mp3-32files-265MB.jpg

stealth17
05-15-2005, 04:31 PM
my 24/7 settings

http://img117.echo.cx/img117/6387/2471qx.jpg

ram i know, the ram is junk.

my max pi 1m

http://img117.echo.cx/img117/218/27secpi4rg.jpg

all on water with IHS on. i have a DD-X Ultra coming from Drewmeister soon.

i plan on taking the IHS off to stabilize the 3000mhz on water :toast:

Concorde Rules
05-16-2005, 11:31 AM
Air Cooled with XP-120 Week 0515 3700+ San Diego @ 2.88Ghz with 1.525V BIOS.
OCCT + S&M 2 passes stable.

http://www.thunder-keep.co.uk/site/hosted/sandeigo/262x11-1.525V.jpg
http://www.thunder-keep.co.uk/site/hosted/sandeigo/262x11-1.525V_tests.jpg

Concorde

cpulloverclock
05-16-2005, 12:21 PM
http://cpull.free.fr/Overclocking/3278MHz-cache&memory-23120.jpg

http://cpull.free.fr/Overclocking/Screen-3460MHz.jpg

formyfaith
05-16-2005, 05:28 PM
Been playing around with my sandy,

and I think I can push this baby a bit more. :D

Cooling : XP-90C with 92mm 38T Vantec Tornado at 5100RPM.

peter lu
05-17-2005, 09:06 AM
DFI ULTRA-D

cooling:XP90 with 92mm Zalman at 2500RPM.

http://img1.picsplace.to/img1/2122/kkk.jpg

cpulloverclock
05-17-2005, 12:41 PM
in comparison

last bench cuz it is sold

http://cpull.free.fr/Overclocking/3160MHz-superpi-22m56.jpg
http://cpull.free.fr/Overclocking/3178MHz-superpi-22m49.jpg

Waus-mod
05-17-2005, 01:05 PM
Got my 3700+ today:

ADA3700DAA5BN
CABGE 0516TPAW
with batch 606

1.71v with boxed cooler:
http://valid.x86-secret.com/show_oc?id=18328

:slapass:
http://img.photobucket.com/albums/v336/wappie/3047.jpg

I will put it on watercooling tommarow because the temps where verry high :D

drcrawn
05-17-2005, 07:15 PM
Playing around with some low voltage at last. Here's the highest stable with 1.35v selected from BIOS. CPUZ shows 1.36v...

http://img275.echo.cx/img275/9691/lowvolt10jk.jpg (http://www.imageshack.us)
***
http://img270.echo.cx/img270/1333/lowvolt115lg.th.jpg (http://img270.echo.cx/my.php?image=lowvolt115lg.jpg)

^don.k's^
05-18-2005, 02:07 AM
Hi, this with a 3700 SD CABGE 0515 SPMW batch no. ~500

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30680&stc=1

I'm also able to achieve 28,375s(@262x11) in sPi but have no pics atm

Primestable @2580mhz vcore:1,36v

Watercooling: MCP600 rev2, home made "jet" CPUblock, heatercore.

My config is in the sig, but the cpu, the mem used was UTT obviusly :p:

uranium
05-18-2005, 12:28 PM
Got some nice results with this SD 4000+ ;)

OPN : ADA4000DAA5BN

Stepping : CABHE0505FPMW

http://img77.echo.cx/img77/1341/305x105sf.jpg

other settings: BIOS 414-3, Tref 1138 (my RAM and board seem to really like this), Dram Drive Strength 7, Data Drive strength 2, 2.8 volts

RAMMIE
05-18-2005, 01:19 PM
My best
http://webpages.charter.net/mlanter/rock%203180.jpg

Viss
05-18-2005, 01:37 PM
1.375*113%
XP120 Delta 2000rpm

Too bad it doesnt do much more on higher volts.

http://img.photobucket.com/albums/v636/loc_oc/5.jpg

click (http://img.photobucket.com/albums/v636/loc_oc/4.jpg)

El Snorro
05-19-2005, 01:59 AM
http://img261.echo.cx/img261/1866/39440ns.jpg

This is the result of my SD 3700+ 0516 TPAW on watercooling.
Too bad I cant do 3 ghz for now.
I just love this chip :)
Because i can run 2850mhz stable 1,45v 24/7 and i can do 2950 prime95 stable on 1,5v.
But @3ghz I am hitting a wall, no matter what vcore :confused:
Well i'm quite statisfied for now ;)

dexth77
05-19-2005, 07:25 AM
ADA3700DAA5BN
CABGE 0505 VPMW
1239326D500xx

K8N Neo2 Pt Bios 1.36b mod
vcore: 1.45+10%
Vdimm: 3.3v
Max Prime95 stable: 11x250

http://img24.echo.cx/img24/9893/250x110kb.jpg (http://www.imageshack.us)

chefnr1
05-19-2005, 11:14 PM
[QUOTE=Discipl3]Picked one of these in Akihabara, Tokyo. It was only 36000 yen so I couldnt refuse.

cpu reads:

ADA3700DAA5BN
CABGE0512XPMW
1230198C50032

Hi i have excacly the same stepping :)
got mine 3700+ SD yesterday and i've tested it so far on the boxed cooler that is so great :) here some results on the test so far i will get my prommy on later i must first fill it with more gas..stepping CABGE 0512 XPMW...

http://upl.silentwhisper.net/uplfolders/upload4/SD_230_fsb.JPG

http://upl.silentwhisper.net/uplfolders/upload9/235_fsb.JPG

http://upl.silentwhisper.net/uplfolders/upload9/240fsb.JPG

http://upl.silentwhisper.net/uplfolders/upload9/245sb.JPG

http://upl.silentwhisper.net/uplfolders/upload6/250fsb.JPG

http://upl.silentwhisper.net/uplfolders/upload0/255_fsb.JPG

here it's just sceen stable with the wonderfull boxed cooler :)
http://upl.silentwhisper.net/uplfolders/upload4/screenstabil_innan_den_krashar.JPG
will post som pics later today when my new filled prommy is on the chip :woot

xxmartin
05-20-2005, 10:51 AM
3700+ San Diego

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/3700.jpg

I have just started with testing. IHS still on it.

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/prime_2200@1.150.png

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/prime_2400@1.225.png

BMORIN
05-20-2005, 02:42 PM
3700+ SanDiego, 100% 24/7 stable

Maybe I ought to try for a suicide shot next, should be fun.

BMORIN
05-20-2005, 06:31 PM
How do you like this for a 24/7 stable superpi time?

boblemagnifique
05-21-2005, 10:42 AM
3700+ San Diego

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/3700.jpg

I have just started with testing. IHS still on it.

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/prime_2200@1.150.png

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/prime_2400@1.225.png

my cabge 0516 tpaw
box amd

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0516tpaw/2750mhz.jpg

maxxxpct
05-22-2005, 01:29 AM
http://www.pctuner.net/img_wb/bhes/test_21-5-05/05-8599.jpg
http://www.pctuner.net/img_wb/bhes/test_21-5-05/18137.jpg

maxxxpct
05-22-2005, 02:20 AM
ln2 cpu ln2 vga
top frequency cpu for moment is
http://img60.echo.cx/img60/4623/screenshark3400mhz2hl.jpg
http://www.pctuner.net/img_wb/bhes/test_21-5-05/pict0931.jpg http://www.pctuner.net/img_wb/bhes/test_21-5-05/pict0960.jpg
the black box is cryo case

peter lu
05-22-2005, 07:25 AM
http://img1.picsplace.to/img1/2171/a.jpg

http://img1.picsplace.to/img1/2171/b.jpg

boblemagnifique
05-22-2005, 11:44 AM
sd 3700+ cabge 0516 tpaw
dfi nf4
box amd
2*256 adata bh5
2k3 64bits (opti sans maxmem104;ramdisk....)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0516tpaw/27s.JPG
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0516tpaw/28gp.jpg
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0516tpaw/32s.jpg

cpumark :

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0516tpaw/cpumark393.JPG

easypanic
05-22-2005, 12:00 PM
http://www.easypanic.be/stable.JPG

1.52V stable :D
Prime and Folding @ Home running for several hours :)

With this core (http://www.easypanic.be/cpu.jpg) :)

Concorde Rules
05-22-2005, 12:27 PM
Best Speed so far: 290x10, 1.525V + 104% - XP-120 with YS-TECH @ ruffly 100CFM. just under 50C load.

http://www.thunder-keep.co.uk/site/hosted/sandeigo/290x10.jpg
http://www.thunder-keep.co.uk/site/hosted/sandeigo/290x10_tests.jpg

Concorde

Waus-mod
05-23-2005, 02:36 PM
So far:

Watercooled

http://img.photobucket.com/albums/v336/wappie/leukerr.jpg

Der_KHAN
05-24-2005, 03:18 AM
SD 3700+ CABGE 0511 XPAW 2900MHz 1.64V (water)

3dmark01 is stable at 2900mhz
prime95 large fft so far only at 2700mhz :/

kakaroto
05-24-2005, 05:22 AM
Today I obtained another 3700+ SD

http://www.xs4all.nl/~famchow/A64_3700_SD/3700_SD.jpg

- DFI ultra-D (bios 510-2)
- Tagan 480W-U22

BOXED cooled max prime stable:

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_2.7GHz_prime95.JPG

With boxed cooler

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_2.9GHz_1M.JPG

Under VapoChill LS :D @1.42v

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_3.0GHz_prime95.JPG

3200MHz @1.72v

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_3.2GHz_pifast.JPG

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_3.2GHz_tests.JPG

http://service.futuremark.com/compare?2k1=8586925 33K 3d :banana: :banana: :toast:

ante_ante
05-24-2005, 08:58 AM
The max for the monent.
http://upl.silentwhisper.net/uplfolders/upload7/3dmark.jpg

Waus-mod
05-24-2005, 02:24 PM
Max superPI stable

http://img.photobucket.com/albums/v336/wappie/spihehe.jpg

Sucka
05-24-2005, 03:25 PM
http://suckasd.com/computer/sandiego/24sec.jpg

http://suckasd.com/computer/sandiego/sandiego.jpg

That's the highest max i've been able to find, anyone know of a 3700+ higher?

kakaroto
05-26-2005, 10:42 AM
Here the max rock stable:

16 and 32M tests under Vapochill LS

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_3.2GHz_16M.JPG

http://www.xs4all.nl/~famchow/A64_3700_SD/A64_3700_SD_3.2GHz_32M.JPG

Pretty nice :toast:

Formann
05-27-2005, 05:37 PM
Got my San Diego today, and did a quick Prime95 test with a NewCastle BOXED cooler.

Looks like its an OK chip.

Hoping for 2.9+ prime stable on air to morrow :)

The chip
http://www.urettferdig.no/forman/images/San_Diego/sd.JPG


http://www.urettferdig.no/forman/images/San_Diego/2800.JPG

Gorod
05-27-2005, 09:24 PM
Thats what i managed to get from my SanDiego 3700+ before i killed it by accident :slapass:

SanDiego 3700+ @ 3155MHz , 1.71V
Vapochill LS
MSI K8N Neo2 Platinum , nForce3 Ultra
2x512MB ,243MHz @ 2.0-2-2-8-1T , 3.6V

http://img286.echo.cx/img286/2119/sse3patchedsuperpi3155mhz3zw.gif

Dumo
05-27-2005, 10:52 PM
Heres 55BN with 1.65V :D
http://img275.echo.cx/img275/7812/cpumark55sandiego8dr.jpg
And compared to 55 130nm...
http://img264.echo.cx/img264/8775/cpumarkmushkin21fh.jpg
http://img279.echo.cx/img279/4959/fx55s19wb.jpg

Dumo
05-27-2005, 11:09 PM
Cooling with vapo LS..

Dumo
05-27-2005, 11:59 PM
How bout some speed? :D
http://img283.echo.cx/img283/5688/screenshot0545an.jpg

coop
05-28-2005, 06:02 PM
CABGE 0516WPAW 1.35v X 113%. [/IMG] URL=http://www.imageshack.us]http://img266.echo.cx/img266/1782/sd1m2800148v6wc.jpg[/URL][/IMG]

coop
05-28-2005, 08:30 PM
1.61v still cooler and seems to pick up where the other one drops off (at same volts) http://img278.echo.cx/img278/1967/288032msd8df.jpg (http://www.imageshack.us) http://img263.echo.cx/img263/9859/281msd1ti.jpg (http://www.imageshack.us)

xxmartin
05-29-2005, 03:43 AM
watercooled 3700+ SanDiego, 32°C air temperature ...

http://valid.x86-secret.com/show_oc?id=20275

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/3082.png

Formann
05-29-2005, 04:31 AM
Update:



Still 3700+ 0505FPMW

How is 2955Mhz on crappy BigWater? Man I LOVE San Diego :D

24c ambient, 1.49vcore.

http://www.urettferdig.no/forman/images/San_Diego/32m-2955.JPG

xxmartin
05-29-2005, 02:29 PM
@ Formann

Really nice CPU! The first 3700+ SD's are the best (0505 ... 0509).
There are some of them out there with 3 GHz primestable @ air cooling.


Suicide with water is max'n out at 3.1 GHz.

http://valid.x86-secret.com/show_oc?id=20360

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/3100.png

SuperPI32M up to 2950 MHz right now.

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/superpi_2950_32m.png

Boble76
05-29-2005, 07:51 PM
With Ice Water +5C (http://koti.mbnet.fi/boble76/Tietokone../San%20Diego%203700+/%e4mp%e4ri-sessio%2027-28.5.2005/4.59%20%20validation.jpg)
26.985s (http://koti.mbnet.fi/boble76/Tietokone../San%20Diego%203700+/%e4mp%e4ri-sessio%2027-28.5.2005/26.985s.JPG) with ice water :rolleyes:

HousERaT
05-30-2005, 06:54 AM
Here is my new 3700+ on air using an XP-90 and a 92mm Delta Triple Blade 4000RPM.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=31535

fredyama
05-30-2005, 08:42 AM
By fredyama

M/B:EPoX 9NPA+SLi (BIOS:Original 04/07/05) Vddr Mod
M/B Bed:V-TEC ARC Bed Rev.3.32
CPU:Athlon64 San Diego 4000+(CABHE 0515SPMW)
CPU Cooling:V-TEC ARC Pot Rev 10.0 + DryIce + Methylated Spirit
Chipset Cooling:Stock
Memory:OCZ PC3200 VX 512MB x 2
VGA:Leadtek Winfast PX6800GT PCI-E @Default
HDD:Hitachi DeskStar HDS722540VLAT20 40GB PATA x 1
Power Supply:OCZ PowerStream 600W
Vcore:1.783-1.788V(Cpu-z)/ Vddr:3.55V/ Vio:3.64V
OS:Windows Server 2003
Remarks: Unpatched Super PI(English)/Super PI Mod1.4



http://premium1.uploadit.org/fredyama//9NPA-SLI-DICE-SD-4000-OCZVX-21m39s.gif

http://premium1.uploadit.org/fredyama//9NPA-SLI-DICE-SD-4000-OCZVX-24.484s.gif

M/B:EPoX 9NPA+ULTRA (BIOS:Original 03/22/05) Vddr Mod
M/B Bed:V-TEC ARC Bed Rev.3.32
CPU:Athlon64 San Diego 4000+(CABHE 0515SPMW)
CPU Cooling:V-TEC ARC Pot Rev 10.0 + DryIce + Methylated Spirit
Chipset Cooling:Stock
Memory:OCZ PC3200 VX 512MB x 2
VGA:Leadtek Winfast PX6800GT PCI-E @Default
HDD:Hitachi DeskStar HDS722540VLAT20 40GB PATA x 1
Power Supply:OCZ PowerStream 600W
Vcore:1.808V(Cpu-z)/ Vddr:3.55V/ Vio:3.64V
OS:Windows Server 2003
Remarks:Super PI Mod1.4

http://premium1.uploadit.org/fredyama//9NPA-ULTRA-DICE-SD4000-OCZVX-SPi-Mod1.4-22m11s.gif

RAMMIE
05-30-2005, 03:56 PM
wow, very nice. Fastest san diego superpi I've seen so far. What is your cooling? Dry Ice? Am I reading that right?


Not anymore

chefnr1
05-30-2005, 10:49 PM
going on water, still waiting for my new prommy 3700+ SD CABGE 0512XPMW with tight BH-5 timins
http://upl.silentwhisper.net/uplfolders/upload9/27.906.jpg

xxmartin
05-31-2005, 12:28 AM
SuperPI 32M is nothing to talk about "rockstable".

2950 MHz @ 1.60V @ SuperPI32M
2880 MHz @ 1.65V @ Prime95

http://mitglied.lycos.de/xxmartin99/A64_3700_CABGE0516/prime_2880@1.650.png

xxmartin
06-01-2005, 02:33 PM
My new 4000+ Sandy is doing quite well on water.

20°C ambient, 22°C water, 39°C full prime load @ 2.95 GHz

http://mitglied.lycos.de/xxmartin99/A64_4000_CABGE0518/4000.jpg

http://mitglied.lycos.de/xxmartin99/A64_4000_CABGE0518/prime_2945@1.675.png


Martin

PcCI2iminal
06-02-2005, 06:15 AM
San Diego 4000+ CABGE 0518UPBW Water Cooled
Ocz EL Rev2 2x512mb
Geil Arare 2x512mb
DFI U D




http://img138.echo.cx/img138/9238/4k27969pigeil7ut.jpg

http://img79.echo.cx/img79/1757/392cpumarksandy6oj.jpg

hornet
06-02-2005, 02:15 PM
Already I obtained this steady result 100% well, but still it goes up more :banana:

http://img85.echo.cx/img85/3448/250htt9xp.jpg

Transonic
06-02-2005, 02:24 PM
I finally sent my card back to BFG and threw in a backup PCI card. Sure enough I hit 2805MHz prime stable for over 11 hours. Once my card comes back I'll try for some more. I'm only at 1.53v and temps are great so I should have some room left.

chefnr1
06-02-2005, 02:30 PM
Heres my super-pi with my new prommy :)
http://upl.silentwhisper.net/uplfolders/upload3/26.750.jpg

Dumo
06-02-2005, 07:58 PM
So far...
http://img140.echo.cx/img140/6110/screenshot0267nj.jpg

SIOUX
06-03-2005, 06:30 AM
Its LS.
And welcome to XS....hope youll enjoy :toast:
And so far with single stage, 55BN have no problem...


I need to get a hold of one of these bad boys. but they are not available here in Dk before next week:)

So far i have gotten this with my 3700+ SD.......

Formann
06-03-2005, 04:45 PM
Finally got my SD under phase.

3700+ 0505FPMW

Evap -43c load (DT200 measurement)

Results not too shabby: :)

http://www.urettferdig.no/forman/images/San_Diego/3413Mhz.JPG

xwoodoo
06-03-2005, 06:15 PM
And a medium Oc/Cooling with SD CABGE 0516 WPAW
Cooling by Asetek Vapochill SE @ 20C full load :slapass: on DFI NF4
Maybe with Prommi Mach2 GT in 2 weeks will get 3.3G :cool:

Pedro Rocha
06-03-2005, 07:28 PM
Here is some quick tests with a 0512XPMW SanDiego +, in a silent Vapo LS (fans at 30%)

Max OC w/ 1.75v core :
http://pedrorocha.planetaclix.pt/SD4000_3542.jpg

Benchable results

3.360mhz SuperPI:
http://pedrorocha.planetaclix.pt/SD4000_3350mhz.jpg

PIFast 3.320mhz (Redlines w/ 3.2v):
http://pedrorocha.planetaclix.pt/SD4000_PIFast_3320.jpg

No bad at all, I hope I can run it in the cascade at -115º C :D

Dumo
06-03-2005, 08:35 PM
@ pedro, nice clock :toast:
@ SAE, heres so far....sandra mem.bw kinda low..
http://img90.echo.cx/img90/5255/screenshot0201qq.jpg
http://img90.echo.cx/img90/4261/screenshot0231li.jpg

peter lu
06-04-2005, 03:59 AM
DFI ULTRA-D
3700+
TCCD 256*2
XP90 +SANYO DENKI 9*9
ZIPPY 500W


http://img3.picsplace.to/img3/2260/1_002.JPG


http://img3.picsplace.to/img3/2260/2_002.JPG


http://img3.picsplace.to/img3/2260/IMAGE140.JPG


http://img3.picsplace.to/img3/2260/6_002.JPG

Waus-mod
06-06-2005, 05:16 AM
My second 3700+ under DI, with my maxxed out motherboard. (getting a new one fast!)

http://img.photobucket.com/albums/v336/wappie/untitled1.jpg

Dumo
06-07-2005, 06:13 AM
http://img32.echo.cx/img32/8751/screenshot0418kv.jpg
http://img32.echo.cx/img32/999/screenshot0448ef.jpg

Boble76
06-07-2005, 06:19 AM
26.985s (http://koti.mbnet.fi/boble76/Tietokone../San%20Diego%203700+/%e4mp%e4ri-sessio%2027-28.5.2005/26.985s.JPG)

8x360Mhz (http://koti.mbnet.fi/boble76/Tietokone../San%20Diego%203700+/htt360.8mhz.GIF)

SP2004 16h 2852Mhz (http://koti.mbnet.fi/boble76/Tietokone../San%20Diego%203700+/SP2004%2016h3s%202852Mhz%201.648v%20ok.GIF)

kiwi
06-07-2005, 08:51 AM
Just a quick test, max. superpi 1m stable on air is around 2950

SD 3700+
CABGE 0515VPMW
1.425 * 123%
XP120 generic 75cfm fan

3dmark and other benchies later


http://img296.echo.cx/img296/2118/29500gn.jpg

xxmartin
06-08-2005, 04:46 AM
4000+ SanDiego on water is running much smoother with DFI SLI-D than GA-K8NXP-SLI.

http://mitglied.lycos.de/xxmartin99/A64_4000_CABGE0518/2900_dfi.png

Major
06-08-2005, 11:20 AM
Final OC on SD 3700+

ADA2700DAA5BN
CABGE 0515VPMW

Purchased from Monarch

Water cooled with Exos2 and Gpu300
Full specs in sig and pics

coop
06-18-2005, 10:41 PM
3.092Ghz. sd 3700 0516 wpaw and "icewater"

El Snorro
06-19-2005, 01:24 AM
This is my 0516 TPAW on my prommy mach2 GT @507

http://www.xtremesystems.org/forums/attachment.php?attachmentid=32700&stc=1

Can go higher but its really :banana: :banana: hot here in holland (like 35 degrees celcius) so its not really good benchweather :mad: :nono:

edit:
Btw, this 3,25ghz is 100% prime stable for 8 hours :banana:

bachus_anonym
06-19-2005, 02:50 AM
OS - Windows Server 2003 Enterprise
Mainboard - DFI NF4 Ultra-D
CPU - San Diego 3700+ 1MB L2 "CABGE 0515SPMW"
BIOS - 510-1
Cooling - "402 Xtreme" built by Chilly1 - single stage


SPi1M @ 3405Mhz .:. SPi16M @ 3380Mhz .:. SPi32M @ 3338Mhz .:. Prime95 ~4hrs @ 3300Mhz

stealth17
06-19-2005, 12:24 PM
opps wrong thread for posting anything but results...sorry. i deleted my previous posts.

here my 3700+ 0515SPMW on my DFI nf4 with 2x512mb of Mushkin XP4000 ram.

here is a shot of my 24/7 on a stock winnie 3000 hsf. voltage is 1.4*110%
http://img27.echo.cx/img27/8323/247stockhsf0nb.th.png (http://img27.echo.cx/my.php?image=247stockhsf0nb.png)

and heres the max i got on a stock winnie 3000hsf. i didnt really try for max screen or mess with a bunch of different voltages or dividers. thats at 1.45*110% iirc. this is on chilled air too, but ^^^ wasnt.
http://img141.echo.cx/img141/217/26pi5hn.th.png (http://img141.echo.cx/my.php?image=26pi5hn.png)

much more to come too. i have a very nice DD unit coming soon and ill have it back in -25c air box. im lookin to break some records. ill have a -30c(or better) gpu chiller coming too so i can break some records on my 6600gt.

ill keep you all updated :toast:

ugp
06-21-2005, 09:51 AM
Ok I just got my new System build the other day and finally got it up and running late late last night.

This is my stepping code

ADA3700DAA5BN
CADGE 0518UPCW
1250228E50772

I am not sure how to really really read the coding on the CPUs

But so far I have went ahead and clocked it at 250x10.0 with the RAM 1:1

Here is a few screens to start off.
http://xtremesystems.org/forums/attachment.php?attachmentid=32819&stc=1
http://xtremesystems.org/forums/attachment.php?attachmentid=32820&stc=1

EDIT:

Same voltage same timings @ 2.6
http://xtremesystems.org/forums/attachment.php?attachmentid=32830&stc=1

peter lu
06-23-2005, 09:17 AM
DFI ULTRA-D
3700+(0516WPMW)
TWINMOS BH-5(UTT)
TT SONIC TOWER



http://img98.echo.cx/img98/1114/kik7ek.jpg (http://www.imageshack.us)

RTarget
06-23-2005, 10:49 PM
ADA 3700 DAA5BN
CABGE 0516 WPMW
http://img150.echo.cx/img150/1876/p953in.gif

andL64
06-25-2005, 04:26 AM
yeah, no cold bug :D :toast:

System specs.:

Amd64 3700+ "San Diego" (stepping CABGE 0517 UPAW)
DFI Ultra-D (nforce4)
2x256MB Kingston BH-5 (not like the screenshots, 1024mb!)
sapphire X800XL (always @ stock)

http://www.xtremesystems.org/forums/attachment.php?attachmentid=33095&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=33096&stc=1

the other ones 3d01,spi... are so large i ll upload them later

seEn

coop
06-26-2005, 03:57 PM
cabge 0516 wpaw 3.1Ghz oh yes, cold water!! http://img58.echo.cx/img58/1343/1mfpi31008lz.jpg (http://www.imageshack.us) and this, http://img291.echo.cx/img291/967/32mxtt1we.th.jpg (http://img291.echo.cx/my.php?image=32mxtt1we.jpg)

freestylercs
06-27-2005, 09:32 AM
Here s my Sandie watercooled under 1AHV2 & Tripple Radiator:

0511 WPMW

3030MHz@1,6V

http://mitglied.lycos.de/freestylercs/hpbimg/3030MHz@1,6V.JPG

3000MHz@1,58V

http://mitglied.lycos.de/freestylercs/hpbimg/300x10%20prime.JPG
http://mitglied.lycos.de/freestylercs/hpbimg/32m%20300x10.JPG

2940MHz@1,5V

http://mitglied.lycos.de/freestylercs/hpbimg/2940MHz@1,5V%20prime24.11.JPG

2880MHz@1,4V

http://mitglied.lycos.de/freestylercs/hpbimg/2880MHz@1,4V%20prime.JPG

2800MHz@1,36V

http://mitglied.lycos.de/freestylercs/hpbimg/2800@1,36V.JPG

2700MHz@1,28V

http://mitglied.lycos.de/freestylercs/hpbimg/2,7GHz@1,28V%20prime24.11.JPG

free

PoL
06-28-2005, 07:43 AM
Here's mine.
Vapochill LightSpeed

http://valid.x86-secret.com/show_oc?id=20352

http://valid.x86-secret.com/cache/20352.png

http://img187.echo.cx/img187/9093/cpu320x109ek.jpg

http://img124.echo.cx/img124/8559/mem5bm.jpg

ugp
06-28-2005, 05:30 PM
Here is my results...haven't tested for 100% stablity yet..but seems to be so far...

Using Stock HSF lol...I guess that is prerty cool...under full load I am only hitting about 42044 MAX. And I am getting right over 7GB/s Bandwidth on the memory...need to tweak that alittle more...

250x11.0
1:1 Divider
http://xtremesystems.org/forums/attachment.php?attachmentid=33294&stc=1

Here is an updated pic...one sec faster lol...
http://xtremesystems.org/forums/attachment.php?attachmentid=33352&stc=1

kiwi
07-08-2005, 12:42 PM
CABGE 0515VPMW
1.4*126% = 1.764
Vapo PE
Full load 20C :slapass:
Prime stable only at 2800, could be 2900 but that would be max., still testing

http://www.xtremesystems.org/forums/attachment.php?attachmentid=33785&stc=1

Sauron_Vie
07-08-2005, 03:29 PM
4000+ SD - CABGE 0512 XPMW
DFI Ultra
Cooled by Vapo LS -34° under load

http://www.xtremesystems.org/forums/attachment.php?attachmentid=33789&stc=1

chefnr1
07-12-2005, 11:10 AM
heres my newest super-pi with prommy on
http://upl.silentwhisper.net/uplfolders/upload1/superpi.jpg

politenessman
07-13-2005, 01:42 PM
righty right heres my ADA3700DAA5BN CABGE 0517UPBW
that just sashayed in bout an hour ago from newegg's nj warehouse . this is first run after half hearted attempt at 10x300. forgot to lower the vcore but temps are fine. ambient down here is like 29C-30C.
ultra-d
2x256mb g.skill la 440
410-3 bios
powerstream 600
850xt
xp90/medium panaflo

http://photos23.flickr.com/25756222_b414a550bd_o.jpg


very truly yours,
politenessman

Levish
07-13-2005, 06:11 PM
On air, oem cooler 1.4 vcore
Not sure how stable ~went pass test #5 on memtest 1.51
http://www.liviulois.com/photogallery/cpuz.JPG
http://valid.x86-secret.com/show_oc?id=27440

Crazykooter
07-18-2005, 07:09 AM
Ive been fiddling with my chip a lot of late including removing the IHS. My load temps never go over 33c which is awesome. The main thing is this is where I have seemed to max out. I really really want to get this chip benchable at 3ghz but its not gonna let me unless I am totally missing something. here is a pic of some minor test I did this morning. The core voltage is at 1.71 which was for testing reasons. It does this same speed @ 1.61.
http://img148.imageshack.us/img148/236/29727pl.th.jpg (http://img148.imageshack.us/my.php?image=29727pl.jpg)

cpulloverclock
07-19-2005, 02:33 PM
http://membres.lycos.fr/cpulloverclock79/Informatique/25.593.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/4.46.5.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/424.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/3358.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/3369.gif

bachus_anonym
07-19-2005, 02:46 PM
My final results on air and phase change:

OS - Windows XP Home
Mainboard - DFI NF4 Ultra-D
CPU - San Diego 3700+ 1MB L2 "CABGE 0515SPMW"
Cooling -
(1) "402 Xtreme" built by Chilly1 - single stage -40C load @ 1.76v

SPi 32M @ 3388Mhz
SP2004 (Prime95 GUI) @ 3300Mhz

(2) Thermalright XP-90 / 92mm Sanyo Denki - ambient 22C

SPi 32M @ 2963Mhz
SP2004 (Prime95 GUI) @ 2904Mhz

misteroadster
07-19-2005, 03:03 PM
My 3700+ at work (caskad'chilled) :
http://service.futuremark.com/compare?2k1=8654713

Crazykooter
07-20-2005, 08:38 AM
Here is my lowered Mhz since I discoverd that there is a divider issue with these SD cores. Anyhow I think this vcore and speed isnt too bad. Ballistix 4000 will be here tomarrow so I may be able to go after that 3ghz on WC ive wanted since I got this chip. Oh and the IHS is removed hense the low temps.
http://img99.imageshack.us/img99/8321/2837153v5jx.th.jpg (http://img99.imageshack.us/my.php?image=2837153v5jx.jpg)

cpulloverclock
07-20-2005, 02:00 PM
tomorrow I'll try 3138MHz with occt and prime at 1.52-1.53v on wcooling

http://membres.lycos.fr/cpulloverclock79/Informatique/4.44.610.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/3383.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/occt.gif

misteroadster
07-20-2005, 06:36 PM
Update : 3700+@3547Mhz 3D benchable :
http://www.xtremesystems.org/forums/showthread.php?t=69151

cpulloverclock
07-21-2005, 02:59 PM
http://membres.lycos.fr/cpulloverclock79/Informatique/occt3144.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/16k.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/16k..gif

Boble76
07-22-2005, 01:29 AM
I got my new "best friend" VapoChill LS on wednesday (Mod by Hatemi). :)

SuperPi 1M 25s (http://koti.mbnet.fi/boble76/Tietokone../DFI%20NF4%20ULTRA-D/VapoChill%20LS/3230Mhz%20MuroPi%201M%2025s.GIF) 3230Mhz
3263Mhz (http://koti.mbnet.fi/boble76/Tietokone../DFI%20NF4%20ULTRA-D/VapoChill%20LS/3263Mhz%20MuroPi%201M%2026s.GIF)

SuperPi 8M 4min44s (http://koti.mbnet.fi/boble76/Tietokone../DFI%20NF4%20ULTRA-D/VapoChill%20LS/MuroPi%208M%204min44s%203230mhz.GIF) 3230Mhz

Test-Zone (http://koti.mbnet.fi/boble76/Tietokone../DFI%20NF4%20ULTRA-D/VapoChill%20LS/IMG_0963%20(Large).jpg) at Home.


DFI nF4 Ultra-D
A64 3700+ San Diego CABGE 0516TPAW (Load -7C/ Idle -22C) 1.696V
VapoChill LS (Load -46C)
2x256Mb Corsair XMS3500
Maxtor 40Gt
aOpen52x32x52 CD-RW
Ati Rage PCI :p:
Hec 350W :p:

cpulloverclock
07-22-2005, 03:14 PM
Pifast 10M at 3171MHz

http://membres.lycos.fr/cpulloverclock79/Informatique/37.28.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/25.515.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/58.984.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/2.10.gif

GoThr3k
07-23-2005, 08:18 AM
don't know if this comes in handy

0505 VPMW 11*250 1.61V

0511 XPAW water 10*290 1.64V

0512 XPMW air 1.55V 2750 zalman
0512 XPMW air 2,897.17 @1.536Vcore with a XP90c
0512 XPMW subzero 11*295
0512 XPMW air 11*268 1.69V

0515 VPMW 271x10 @1.40 Vcore
0515 VPMW 11*275 1.65Vcore
0515 VPMW air 2750@1.55W Zalman CNPS-7000Cu
0515 VPMW water 10*265
0515 VPMW air 255 x 11 = 2805mhz 1.55v Thermaltake Silent Tower heatpipe CL-P0025
0515 SPMW air 10*285 XP-90
0515 SPMW subzero 11*306 1.74V
0515 SPMW subzero 292x11 vapo ls 1.68V
0515 SPMW subzero 11*290 1.73V mach1
0515 SPMW air 2863mhz
0515 SPMW 11*255 Thermalright XP-120 with 120mm Panaflo at 110cfm
0515SPMW water 10*290
0515 air 11*262 XP-120
0515 SPMW water 11*260 1.68V
0515 SPMW 10*290 1.52V

0516 TPAW air 11*277 1.71V
0516 TPAW water 11*270 1.61V
0516 TPAW 11*219 1.2V
0516 TPAW 10*275 1.47
0516 tpaw 10*299 1.58V
0516 TPAW water 11*265 1.61V
0516 TPAW air 10*290 1.6V

starting now at page 5 but i am a bit bored

Crazykooter
07-23-2005, 02:15 PM
0515 VPMW 271x10 @1.40 Vcore
0515 VPMW 11*275 1.65Vcore
0515 VPMW air 2750@1.55W Zalman CNPS-7000Cu
0515 VPMW water 10*265
0515 VPMW air 255 x 11 = 2805mhz 1.55v Thermaltake Silent Tower heatpipe CL-P0025

It looks like mine isnt listed there. I have 1st post second page so I was suprised to see it missing. Just as a update it is now at 260x11 @ 1.55v Water cooled no IHS. 100% stable. I know that it is 100% because if you can play BF2 for hrs without a crash it doesnt get anymore stable then that. If it gets colder out I can get 265*11 without crashes but its near 100F lately and my AC isnt keeping up.

cpulloverclock
07-23-2005, 04:13 PM
here are all my screenies

http://www.overclocking-masters.com/forum/viewtopic.php?id=595

an example

http://membres.lycos.fr/cpulloverclock79/Informatique/2.10.187.gif

Creative
07-24-2005, 01:47 AM
Evening to those who remember me from the old days - Hi Saaya :)

Just got myself a new setup after 2 years away and she is going nicely. 3700+ CABGE 0516MPM with an Ultra-D on default cooling and AS Ceramique and default TIM on chipset.

Seems pretty stable afteer 2 weeks. I can run 250fsb for about 10 mins but then prime fails but this screenie has been running for nearly a week now 24/7 so Im happy until I get some new cooling...possibly one of those xp120 or something....:)

Im still finding all the timings and dividers quite complicated but should learn them all in time. I have been a little selfish and have never strayed from those ram timings in finding my OC....I just cant bear to have loose timings :D The trust Hyperx PC3500 with BH-5 chips are still running strong after 3 years in my hands :)

Anyways, heres a screenie :)

See you around a little more often :)

ps
Look at my sig to see how long its been since I was here.... havt had that system since Jan 2004 ;)

cpulloverclock
07-24-2005, 02:37 PM
http://membres.lycos.fr/cpulloverclock79/Informatique/10.38.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/3208.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/3401.gif

misteroadster
07-25-2005, 10:54 AM
http://www.ocbase.com/voirocctgraph_1375.html

cpulloverclock
07-25-2005, 02:47 PM
http://membres.lycos.fr/cpulloverclock79/Informatique/25.406.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/37.13.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/428.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/3405.gif

simonk
07-25-2005, 07:46 PM
Results of new FX-57 phase change

...:::MadDog:::
07-27-2005, 01:14 AM
(week 16 )


stock cooler

http://img348.imageshack.us/img348/3266/vcoredefault9kd.jpg
http://img348.imageshack.us/img348/7432/1551jn.jpg

my configs to use 24/7

http://img143.imageshack.us/img143/2290/config18jn.th.jpg (http://img143.imageshack.us/my.php?image=config18jn.jpg)


Prommy cooled

http://img345.imageshack.us/img345/2807/cpu29050xq.jpg
http://img345.imageshack.us/img345/9265/3100alus0pz.th.jpg (http://img345.imageshack.us/my.php?image=3100alus0pz.jpg)
http://img345.imageshack.us/img345/7012/cpu32210re.jpg

max 1.55v.

just my first test

Viss
07-27-2005, 03:02 AM
0515VPMW
http://img.photobucket.com/albums/v636/loc_oc/4000prom.jpg

misteroadster
07-27-2005, 07:40 PM
FX57 0512 MPMW
Results :
http://overclocking-masters.com/Photos-Screens/223pi.JPG


http://overclocking-masters.com/Photos-Screens/32m57.JPG


http://overclocking-masters.com/Photos-Screens/490.JPG


http://overclocking-masters.com/Photos-Screens/Maxscreen.JPG

...:::MadDog:::
07-29-2005, 04:02 AM
stock cooling.

http://img146.imageshack.us/img146/9829/burnin1srt4zv.jpg

Dimitriman
07-29-2005, 04:08 AM
Nice one on the 3.8 Ghz!
:clap:

Jasonhk
07-30-2005, 01:29 PM
-3700+ SD
-Kingston HyperX BH5
-6600GT PCI Express
-500W A-Open PSU
-Watercooled..Asetek Triple Raditor System.

Idle testing @ 2.42Ghz

http://www.sa3doc.za.net/3700/temps%20(Medium).JPG

Cpu was Loading @ 37/38c @ 2.9Ghz.. side of copper cpu block temp was 29c...

Super Pi

http://www.sa3doc.za.net/3700/28.172%20(Medium).JPG

Memory Bandwidth is not too good.

3200+ got 8006 @ 283 * 10 = 2830Mhz

Here is my Sandy 3700+ @ 271 * 11 = 2988Mhz

http://www.sa3doc.za.net/3700/memband-7817%20(Medium).JPG

Suicide Shot.. (Well 3Ghz shot ;))

http://www.sa3doc.za.net/3700/cpu-3005.JPG

Didnt try more..testing for now.. :D

Sauron_Vie
07-31-2005, 05:11 AM
Here is a little update:

SD 4000+
DFI LP NF4 Ultra
4000 Redlines
Cooled by Vapo

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35106

Jasonhk
07-31-2005, 01:35 PM
Update

3700+ SD AA5BN CABGE 0516TPAW
DFI SLI-DR
WATERCOOLED ASETEK TRIPLE RAD/ ANTARTICA / HYDOR L30

Super Pi : 27.953

http://benching.sa3doc.co.za/3700+/27.953%20(Medium).JPG

Suicide Shot.. got higher but was lazy and did too quick and got corrupted..

3005Mhz.. (http://valid.x86-secret.com/show_oc?id=29965) :D

http://valid.x86-secret.com/cache/29965.png

simonk
07-31-2005, 04:39 PM
I can't seem to get stable over 3.43 for benches what is considered the maximum "safe" voltage for a FX 57 on a Mach 2 GT?

dogsx2
08-04-2005, 03:27 PM
yesterday i got the $260 3700 sd special from monarch and am happy with it. i always thought sd's were a waste of money over venice but now i'm not so sure. did some burn in on it for 9 hrs while at work and this is what i got so far.

0518 UPCW

http://img175.imageshack.us/img175/3146/29003av.th.jpg (http://img175.imageshack.us/my.php?image=29003av.jpg)

why doesn't cpu-z show val?

Jasonhk
08-06-2005, 03:28 AM
YAY Colder Night last night - hit over 3Ghz 1M Benchable.

Super Pi 27.671 @ 3005Mhz

http://benching.sa3doc.co.za/3700+/27.671%20(Medium).JPG

Suicide 3130Mhz

http://benching.sa3doc.co.za/3700+/3130.jpg

Link (http://valid.x86-secret.com/show_oc?id=30759)

:D

Spinal
08-06-2005, 11:03 AM
my 3700+ CABGE 0522XPBW @ 2,800GHZ "280X10" 1.55v "Stock cooler lol"
Gskill DSU2F1LA 1GB @ 280 2.5 3 3 8 1T
DFI LP NF4 ULTRA-D

http://img338.imageshack.us/img338/8920/29spi0iu.th.jpg (http://img338.imageshack.us/my.php?image=29spi0iu.jpg)

dmo580
08-12-2005, 02:20 AM
Ok, I'm on my first night of testing so I can't give you anything TOO special.

All at 11x multi
220: No problem for 3 hrs of OCCT Torture
225: No problem 1 hr
230 HTT: Only tested for 25 min, but freq too low for me I wanted to bump up

I ran 240 doing prime and OCCT and it was fine (2.64 GHz)

I tried 243 HTT (2.67 GHz) and OCCT would fail and would need 1.47 volts to get it to work. 2673 MHz @ 1.469 (1.300 * 113%) works fine for OCCT testing.

Here are the images.

2673 MHz
1.469 Vcore

Lidocaine
08-12-2005, 12:25 PM
http://216.77.188.54/coDataImages/p/Groups/251/251420/folders/199156/16435244000at2.8GhzPrimeStable.JPG

with 4x512 sticks of GSkill LE 1:1 all air. :D

dmo580
08-13-2005, 02:35 AM
http://www.atotchat.org/~montavis/dmo/comp/oc3.jpg

http://www.atotchat.org/~montavis/dmo/comp/oc4.gif

Umm I hit 2.67 with 1.5 volts, but this required MAJOR@$$ scaling to get here. I'm not too happy =( Sniff. Oh well

boblemagnifique
08-13-2005, 03:28 AM
San Diego 3700+ CABGE 0524 XPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/sd3700.jpg


2507mhz at 1.42v (250x10)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2005-01-01-00h35-VoltCore.png


2633mhz at 1.52v (263x10)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2005-01-01-03h05-VoltCore.png


2702mhz at 1.6v (270x10)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2005-01-01-08h03-VoltCore.png

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2700mhz.png


2772mhz at 1.66v (252x11)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2005-01-01-09h51-VoltCore.png

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2005-01-01-09h51-CPUGraph.png

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0524xpbw/2772mhz.png

Perc
08-13-2005, 06:32 AM
3700 sandy 0518WPAW CABHE just got it seems to not like the 11x multi with anything higher then 235ish so heres a shot of 10x280 2800mhz 1:1 im praying for 3gigs.....

peace perc,

dogsx2
08-13-2005, 10:08 AM
3700 sandy 0518WPAW CABHE just got it seems to not like the 11x multi with anything higher then 235ish so heres a shot of 10x280 2800mhz 1:1 im praying for 3gigs.....

peace perc,

i have a 3700 0518UPCW that doesn't do too bad on 11x. i guess there is a big diff within the same week.

http://img154.imageshack.us/img154/5905/259x113ew.th.jpg (http://img154.imageshack.us/my.php?image=259x113ew.jpg)

this is my 24/7 with cnq on.

http://img38.imageshack.us/img38/6799/250x115ac.th.jpg (http://img38.imageshack.us/my.php?image=250x115ac.jpg)


sure would be nice if people used thumbnails, even with dsl it is really moving and shaking the screen when it loads.

ante_ante
08-14-2005, 12:09 AM
This is what i can do with only 1,45V vcore super pi 32mb stable.
Using a Mach1 with 507 gas, but need to refill it because i hits nearly 0 degrees with 1,7v vcore. But for the moment it runnin fine.
Also my redline pc4000 runnin fine at 265mhz and 3,4V :clap:

http://upl.silentwhisper.net/uplfolders/upload0/super32.jpg

More to come after some new gas in the cooling unit.

Fosco
08-19-2005, 08:04 AM
http://home.online.no/%7Eandr-sei/Fosco/DFI/3700stepping.JPG

http://home.online.no/%7Eandr-sei/Fosco/DFI/3700-air-high.JPG

http://home.online.no/%7Eandr-sei/Fosco/DFI/3700+.JPG


This is with SLK948u and 92mm papst..

Still testing, watercooling to be mounted soon

Fosco
08-21-2005, 07:55 AM
Uppdate! Now on water ( RBX ++ )

http://home.online.no/%7Eandr-sei/Fosco/DFI/29pi.JPG

Tim
08-21-2005, 03:14 PM
0522 TPMW's suck....bigtime :(

Crazykooter
08-21-2005, 03:35 PM
0522 TPMW's suck....bigtime :(
How long and how hard have your burned it in ? Some 3700's need a lot of vcore to oc worth a damn.

Riverna
08-22-2005, 07:19 PM
-3700+ SD UPMW 0525 HS off
-OCZ EL VX PC4000
-X800Pro 12 Pipes PCI Express
-Tagan 480 PSU
-Watercooled

http://www.forumdeluxx.de/gallery/data/500/88862860UPMW1.JPG
http://www.stosstrupp-steiner.net/~Chris/3700er-Pr0n3.jpg

My other san diego (xpmw 0524) is very bad. 2250mhz 1.4v is the maximum stable clock :(

Primoz78
08-23-2005, 12:23 AM
-3700+ SD UPMW 0525 HS off
-OCZ EL VX PC4000
-X800Pro 12 Pipes PCI Express
-Tagan 480 PSU
-Watercooled

http://www.forumdeluxx.de/gallery/data/500/88862860UPMW1.JPG
http://www.stosstrupp-steiner.net/~Chris/3700er-Pr0n3.jpg

My other san diego (xpmw 0524) is very bad. 2250mhz 1.4v is the maximum stable clock :(


Dude I have an exact chip as yours but unfortunately I can pass 250*11 :confused: I think have some motherboards problems, cause with my previous CPU...Venice 3000+ 0517APAW I can get 300*9 at 1,456V but not 1 mhz more...my DFI is today going to RMA... :mad:

Regards,
Primoz

Fosco
08-23-2005, 07:27 AM
3700 0522XPMW Uppdate.

Water RBX++

http://home.online.no/%7Eandr-sei/Fosco/DFI/18p.JPG

Dani
08-23-2005, 02:19 PM
DFI nF4 Ultra-D
Zalman 7700CU
Brand new, try 2.7GHz 1.39Vcore tomorrow :D :D

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_stepping.JPG

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_2603MHz_1.39V_Prime95_AIR_3h14m.gif

boblemagnifique
08-23-2005, 05:59 PM
3700+ CABGE 0516 TPAW
XP90C + 120mm papst

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cabge0516tpaw/2853.3mhz.jpg

Dani
08-25-2005, 07:41 AM
DFI nF4 Ultra-D
Zalman 7700CU

Stepping (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_stepping.JPG)

2702MHz @ 1.39Vcore +15h (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_2702MHz_1.39V_Prime95_AIR_15h41min.gif) with AIR, ambient temerature ~25ºC/80ºF

Dani
08-26-2005, 01:59 PM
DFI nF4 Ultra-D
Zalman 7700CU, ambient temperature ~25ºC/80ºF

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_stepping.JPG

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_2860MHz_1.5V_Prime95_AIR_+1h.gif

Fosco
08-27-2005, 07:42 AM
uppdate : now without IHS

http://home.online.no/%7Eandr-sei/Fosco/DFI/ubehandlet.JPG


http://home.online.no/%7Eandr-sei/Fosco/DFI/32m80.JPG

Uppdate again !

http://home.online.no/%7Eandr-sei/Fosco/DFI/32m30.JPG

sideeffect
08-27-2005, 08:22 AM
The higher i raise the core mhz the lower i have to have the ram mhz speed is this a common thing of the san diego ?

Doesnt matter on the ram timings so much.

Current Clock (http://valid.x86-secret.com/show_oc?id=35120)

Dani
08-28-2005, 12:19 PM
OCCT test 30min. 285*10 1.5Vcore (http://koti.mbnet.fi/dani69/OCCT/DFI%20nF4%20Ultra-D/4000+%20San%20Diego%200524XPBW/285.3x10%201.5V/) with 4000+ San Diego and Zalman7700CU

Formann
08-30-2005, 06:29 AM
I´ll take that 3700+ Fosco. Just send it over :D

FriGidi
08-30-2005, 06:41 AM
K8NSU, watercooling
http://img206.imageshack.us/img206/8898/steppinki2pm.jpg

2801MHz @ 1.58V (http://img363.imageshack.us/img363/740/28gsp20047xl.jpg) SP 2004 +8h

iMAX
08-30-2005, 10:34 AM
San Diego 3500+ 512KB L2 (CABHE 0505 EPMW)
MSI Neo2 (bios 1.36R41T)

@300*10, SP2004 : 10h20m

http://xtremesystems.org/forums/attachment.php?attachmentid=36398&stc=1

El Snorro
08-30-2005, 10:46 AM
Nice oc there.
Never saw a 3500+ SD until now :)

Nice chip :banana:

LenniZ
08-30-2005, 01:25 PM
My sucky 3700+ :(
Its a CABHE 0518 WPAW
http://i3.photobucket.com/albums/y55/LenniZ/24-7-stable.jpg

So :banana::banana::banana::banana:ing crap, its 100% stable at 1.48v. but at 2805 mhz it needs 1.64v++
I can do benchmarks as high as 2900 mhz tho, with 1.64v.

What is the highest 24/7 safe voltage? 1.7v maybe ? My cooling is in my sig.
and btw, I'm getting a new DFi so I can run 2x512MB :)

Dani
08-30-2005, 04:06 PM
I love my 4000+ SD :toast:

2906MHz @ 1.55V (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_2906MHz_1.55V_Prime95_AIR_2h30min.gif) Prime95 +2h30min:toast:

DFI nF4
Zalman 7700CU@1800RPM

Crazykooter
08-30-2005, 11:22 PM
My sucky 3700+ :(
Its a CABHE 0518 WPAW
http://i3.photobucket.com/albums/y55/LenniZ/24-7-stable.jpg

So :banana::banana::banana::banana:ing crap, its 100% stable at 1.48v. but at 2805 mhz it needs 1.64v++
I can do benchmarks as high as 2900 mhz tho, with 1.64v.

What is the highest 24/7 safe voltage? 1.7v maybe ? My cooling is in my sig.
and btw, I'm getting a new DFi so I can run 2x512MB :)
Thats not crappy at all unless your phase changed. Which your not. On air or water that is spot on for that cpu. I run 24/7 @ 2880 1.64v 37c load with wc. I wouldnt complain at all.

Absolute_0
08-30-2005, 11:28 PM
I love my 4000+ SD :toast:

2906MHz @ 1.55V (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_2906MHz_1.55V_Prime95_AIR_2h30min.gif) Prime95 +2h30min:toast:

DFI nF4
Zalman 7700CU@1800RPM

Good stuff mate, :toast:

You know, that chip is just screaming for water/phase cooling! :banana:

iMAX
08-31-2005, 12:02 AM
Nice oc there.
Never saw a 3500+ SD until now :)

Nice chip :banana:


Thank man

Somebody said Venice, somebody said San Diego with my chip ^_^

Dani
08-31-2005, 02:07 AM
Good stuff mate, :toast:

You know, that chip is just screaming for water/phase cooling! :banana:
Thanks :toast:
Gonna try some DI soon :D

Dani
08-31-2005, 04:43 PM
4000+ SD, not maxed out yet with 1.55Vcore :D
DFI nF4
2x256mb KHX3500
ZM7700CU

Yes, very crappy divider, im on 3Vdimm, only test my CPU

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_SP8M_2921MHz_1.55V_5m24s_AIR.gif

Dani
09-01-2005, 04:25 PM
4000+ SD
DFI nF4

Prime95 now with 2944MHz and SP8M 2972MHz with AIR

Dani
09-02-2005, 03:33 AM
DFI nF4 Ultra-D
Zalman 7700CU

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_stepping.JPG

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/SS_4000+_3051MHz_1.64Vcore_AIR.gif

bubblethumper
09-02-2005, 07:48 AM
SD4000 CABGE 0517 XPMW

Prime stable at 3.2 ghz on stock Vapochill LS cooling.

Mobo: DFI NF4
Ram: G.Skill LE 2x512
PSU: PCP&C 510 SLI

Really hit a wall at 3.2 ghz. Can't even do 3.25. Funny think is that I can get over 3 ghz without much extra voltage. The last 150mhz required huge voltage increase.

Sigh, you get what you pay for. Wish I had an FX55

Dani
09-02-2005, 01:50 PM
4000+ SD
DFI nF4
ZM7700CU

3106MHz (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/SS_4000+_3106MHz_1.64V_AIR_Validation.gif) with AIR COOLING :toast:

ante_ante
09-03-2005, 11:36 PM
Dfi Nf4 Ultra
3700+ San Diego
Mushkin Redline
Vapo LS original

CpuZ (http://valid.x86-secret.com/show_oc?id=36512)

Dumo
09-07-2005, 12:13 PM
0516WPMW......

http://img58.imageshack.us/img58/449/screenshot0017in.jpg

davidw8818
09-09-2005, 02:33 PM
- Stepping and/or CPU Assembly Date ---CABGE 0517 UPBW
- VCORE --- 1.58v
- Method of Cooling --- custome water cooling
- Temperatures (idle 29c full load 46c)
- Specifications of System --- see Signature
- Stability Tests (SuperPi, Prime95, 3DMark, etc.) at 290x10 still testing

afireinside
09-10-2005, 06:23 PM
http://afireinside.evilspork.net/AFI/3700+/GCS0026.jpg
http://afireinside.evilspork.net/AFI/3700+/GCS0027.jpg
http://afireinside.evilspork.net/AFI/3700+/GCS0030.jpg


Dry ice domination on solid aluminum unit next weekend!

LenniZ
09-11-2005, 08:37 AM
This is my max on superpi 1m:
http://i3.photobucket.com/albums/y55/LenniZ/Pi-2942mhz-28sec.jpg

1.65vcore :/ only stable at 2750mhz 1.48v, and 2805 mhz 1.6v :|

267x11 with 180 divider on RAM.

Moonman
09-11-2005, 11:19 AM
0516TPAW cooled with modded Mach1
http://img385.imageshack.us/img385/3662/251888xp.jpg
http://img385.imageshack.us/img385/4118/32m3236mhz3ys.jpg

For 24/7 use running at 3150Mhz.

cadaveca
09-11-2005, 11:58 AM
0512MPMW CABGE 3700+ retail boxed. Thermal paste still not set yet.
http://www.xtremesystems.org/forums/attachment.php?attachmentid=36980
http://www.xtremesystems.org/forums/attachment.php?attachmentid=36981
http://www.xtremesystems.org/forums/attachment.php?attachmentid=36982
http://www.xtremesystems.org/forums/attachment.php?attachmentid=36983

ugp
09-11-2005, 02:23 PM
Finally after all day of reading threads and testing settings...I finally got it stable! Here are my results. I am very happy with them so far. I also switched to using the 510-1 BIOS and so far it shows good. The voltage on the CPU is at 1.375 + 123%

EDIT: I ran AquaMark3 because I am sick of 3DMark03. No matter what I get Alittle over 20K... Does anyone have any idea on this??? I mean I scored the same thing at 2.2GHz

http://i5.photobucket.com/albums/y190/ugp/Computer/Finally.jpg

http://i5.photobucket.com/albums/y190/ugp/Computer/2005-09-16-17h16-CPUGraph.gif

http://i5.photobucket.com/albums/y190/ugp/Computer/250FSB.jpg

And here is my 3DMark05 Score...this seems about right for stock clocks on the 6800GT OCs...
http://i5.photobucket.com/albums/y190/ugp/Computer/3DMark05-9585.jpg

http://service.futuremark.com/compare?2k1=8716361

http://i5.photobucket.com/albums/y190/ugp/Computer/AquaMark3-94269.jpg

chefnr1
09-14-2005, 09:22 PM
Heres my FX57 on prommy machII r507 newley regased :)
super-pi and clokck
http://upl.silentwhisper.net/uplfolders/upload0/3571mhz-S-pi.JPG
idle on evap at 1,67 vcore in bios
http://upl.silentwhisper.net/uplfolders/upload6/idle.jpg
temp on evapp after this super-pi
http://upl.silentwhisper.net/uplfolders/upload6/efter-S-pi.jpg
pretty nice :)

LenniZ
09-16-2005, 11:43 AM
Finally I got 3Ghz:
http://valid.x86-secret.com/cache/38494.png
http://valid.x86-secret.com/show_oc.php?id=38494
1.64vcore
like 20 sec after that the system locked up..


What is max safe voltage for my 3700+ in short benchmarks? 3dmark, superpi etc. I'm on watercooling.

STONKA
09-17-2005, 02:30 AM
0508EPMW Cooled Water IHS On !!

3GHZ at 1.4 Vcore !!

http://www.forumdeluxx.de/gallery/data/500/71973ghz_1_4_Vcore.JPG

3050MHZ 1.48 Vcore !!

http://www.forumdeluxx.de/gallery/data/500/71973050-1_48.JPG

3.1 GHZ 1.52 Vcore !

http://www.forumdeluxx.de/gallery/data/500/71973100-1_52Vcore.JPG


Neext few Days a go to max OC :)

STONKA
09-17-2005, 04:48 AM
With my old Sd3700+ make my Ram 2x512mb A-data pc600 2.5-4-3-3 max 305 FSB 1:1 Stable but with this SD is max 312 FSB , but i now this yet since last Test !!

Jep only 2.7 Vdimm

SET
09-22-2005, 08:19 PM
0532 XPAW

Max SPi 1M with Air Cooling:

http://img393.imageshack.us/img393/5601/1m272355wm.th.jpg (http://img393.imageshack.us/my.php?image=1m272355wm.jpg)

Grettings

Dani
09-23-2005, 05:26 AM
0530 XPAW

Max SPi 1M with Air Cooling:

http://img393.imageshack.us/img393/5601/1m272355wm.th.jpg (http://img393.imageshack.us/my.php?image=1m272355wm.jpg)

Grettings
Atleast this with Air Cooling :D :
0524XPBW

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_SP8M_3005MHz_1.63V_5m15s_AIR.gif

Dani
09-23-2005, 04:13 PM
Here is the barrier to coldbug :( :( :(

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+%20CO2/4000+%20SD%20CO2%203305MHz%20Prime95.jpg

toreide
09-25-2005, 03:58 PM
I got a new 3700+ installed, forgot to write down the stepping, but from memory 0533**CW.

It' currently @ 290 x 10 " 1,62v, loadtemps 52C / 45C / 38C.

Still testing.

afireinside
09-25-2005, 04:29 PM
http://img.photobucket.com/albums/v448/zero-IGN/27ice.jpg

:D On ice water. Close to 1.9V set in BIOS.

bachus_anonym
09-25-2005, 07:38 PM
This thread is ONLY for showing results/screenshots. There's another thread for discussions. Thread cleaned!
Thank you.

bachus_anonym
09-27-2005, 12:46 PM
My final SP2004/P95 results on phase change:

OS - Windows Server 2003
Mainboard - DFI NF4 Ultra-D
CPU - San Diego 3700+ 1MB L2 "CABGE 0515SPMW"
Cooling -

SP2004 (Prime95 GUI) SmallFFT @ 3311Mhz
SP2004 Blend @ 3311Mhz
Sandra benches @ 3311Mhz

Viss
09-27-2005, 01:30 PM
First try with new chip. With the VX so i need the divider unfortunately, never ran them on this board/ram and something aint right. Mach (unmodded) is having a hard time keeping temps below zero under load. Quite pleased with first result though :)

http://img.photobucket.com/albums/v636/loc_oc/33248M.jpg

http://img.photobucket.com/albums/v636/loc_oc/33701M.jpg

Dani
09-28-2005, 03:37 PM
UPDATE:
Still with Thermaltake Big Typhoon, room temp ~24ºC/75ºF
DFI nF4 SLI-DR
4000+ SD
2*512mb Mushkin RL XP4000

SP8M
http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_SP8M_2951MHz_1.63V_5m02s_AIR.gif

SP32M, fluff :(
http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/4000+%20San%20Diego/4000+_SD_SP32M_2951MHz_1.63V_24m53s_AIR.gif

kakaroto
09-30-2005, 04:19 PM
CPU: 4000+ 0505FPMW
MOBO: DFI nF4 SLI-D
MEM: G.skill PC4000 2GB HZ
COOLING: Dangerden TDX, Dtek 50Z and HWlabs Xtreme1

http://www.xs4all.nl/~famchow/A64_4000_SD/A64_4000_2.8GHz_SP2004_WC.JPG

http://www.xs4all.nl/~famchow/A64_4000_SD/A64_4000_2.9GHz_SP2004_WC.JPG

http://www.xs4all.nl/~famchow/A64_4000_SD/A64_4000_2.9GHz_32MSPI_WC.JPG

I thinks the temps are little high, strange this one is hotter then X2 3800 @1.5v..

PcCI2iminal
10-08-2005, 10:09 AM
FX-57 CAB2E 0531RPMW

http://i7.photobucket.com/albums/y296/pcci2iminal/Imagem026.jpg

http://i7.photobucket.com/albums/y296/pcci2iminal/367863d01fx577800gtx.jpg


3300mhz 275 x 2-2-2-5 Sanmax 339WF
http://valid.x86-secret.com/show_oc?id=41618

revenant
10-08-2005, 11:41 PM
here's my KAB2E 0532XPMW
http://venus.walagata.com/thumbs/agunn_3k.jpg (http://venus.walagata.com/w/agunn/3k.jpg)

Viss
10-09-2005, 10:21 AM
2x256 9/10

http://img.photobucket.com/albums/v636/loc_oc/33.jpg

http://img.photobucket.com/albums/v636/loc_oc/1M.jpg

http://img.photobucket.com/albums/v636/loc_oc/2M.jpg

http://img.photobucket.com/albums/v636/loc_oc/sandra.jpg

http://img.photobucket.com/albums/v636/loc_oc/val.jpg

jmp571
10-14-2005, 10:06 PM
AMD 3700+ San Diego Core
ADA3700DAA5BN
KAB2E 0532XPAW
1303057H50533

2860Mhz 260x11 1.40v + 110%
Air cooled 38C full load, 28C idle

Images Removed... Sorry

toreide
10-17-2005, 08:03 AM
I got a new 3700+ installed, forgot to write down the stepping, but from memory 0533**CW.

It' currently @ 290 x 10 " 1,62v, loadtemps 52C / 45C / 38C.

Still testing.

Update!

I'm now stable at 2.9ghz with 1.568v. I'm now using ocz vx3200 memory on 5/6 divider @ 2-2-2-6. Gives me better performance than my 4800 @ 2.5-4-3-7 with no divider.

Graphics card is x800xl @ 452/560 mhz

Scores:

Aquamark: 83878 (12054-13783)
3Dmark05: 5902 (cpu 6327)
Sandra mem bw: 7140/7077
Sandra cpu arithmetic: 12189 / 4574 / 5927
Sandra cpu mm: 27642 / 29711
SuperPi 1m: 29,188
SuperPi 32m: 25m 49,125

toreide
10-17-2005, 10:10 AM
http://i20.photobucket.com/albums/b246/toreide/100_3153.jpg

toreide
10-18-2005, 07:27 AM
Tweaked memory to try to improve performance. Settings as in screenshot. Loadtemps are also as seen here as I was running P95 torture test.

http://i20.photobucket.com/albums/b246/toreide/100_3154.jpg



I have not had the time to run all of these test yet, but updated scores are added.

Scores:

Aquamark: 83878 (12054-13783) --> 84004 (12057 - 13851)
3Dmark05: 5902 (cpu 6327)
Sandra mem bw: 7140/7077 --> 7180/7116
Sandra cpu arithmetic: 12189 / 4574 / 5927 --> 12208 / 4576 / 5930
Sandra cpu mm: 27642 / 29711 --> 27653 / 29763
SuperPi 1m: 29,188 --> 29,109
SuperPi 32m: 25m 49,125

These settings have not been tested for stability. I will update as soon as I have.

LenniZ
10-20-2005, 02:44 PM
Finally completed OCCT test:
http://i3.photobucket.com/albums/y55/LenniZ/OCCT_2810mhz-234mem.jpg

http://i3.photobucket.com/albums/y55/LenniZ/2005-10-20-23h19-CPUGraph.gif

I think this temperature is kinda high for my 3700+ on watercooling, or what?

cadaveca
10-20-2005, 04:33 PM
not @ 1.6v just keep it under 40c.

I(illa Bee
10-21-2005, 01:03 PM
http://s10010001.shackspace.com/Mics/3700stepping.jpg

This is prime stable for +12 hours, I wanted to play some Bf2 after than so I stoped it...
http://s10010001.shackspace.com/Mics/2800MhzSD.JPG

This is shootin for a high, it ran windows just fine, but anything intense like BF2 of prime crashed right away....
http://s10010001.shackspace.com/Mics/3Ghz.JPG

Sorry about the [H]ard|OCP stuff, i orignally posted over there...

toreide
10-25-2005, 08:05 AM
http://i20.photobucket.com/albums/b246/toreide/32m_3g_vx.jpg
http://i20.photobucket.com/albums/b246/toreide/32m_3g_loadtemp.jpg
http://i20.photobucket.com/albums/b246/toreide/SuperPi.jpg

Not tested for stability yet. Seems very responsive to voltage. Wish I had some eXtreme cooling.....

umbre_tombetoil
10-26-2005, 07:24 AM
Some results of my 4000+ SD 0515 SPMW (cpulloverclock SD) on air (XP120 + Enermax UC12FAB 12V) :

max s-pi 1M : http://img62.echo.cx/img62/1372/spibestsd4ec.th.jpg (http://img62.echo.cx/my.php?image=spibestsd4ec.jpg)

s-pi1M 28GP : http://img221.echo.cx/img221/4350/spisd28gp3eo.th.jpg (http://img221.echo.cx/my.php?image=spisd28gp3eo.jpg)

max cpu-mark : http://img270.echo.cx/img270/3883/maxcpumark8hr.th.jpg (http://img270.echo.cx/my.php?image=maxcpumark8hr.jpg)

max screen : http://img278.echo.cx/img278/9277/maxscreen1pd.th.jpg (http://img278.echo.cx/my.php?image=maxscreen1pd.jpg)

2.8Ghz stability : http://img275.echo.cx/img275/8474/stabsd28002ku.th.jpg (http://img275.echo.cx/my.php?image=stabsd28002ku.jpg)

Have some problems with my DFI motherboard, probably best results coming soon :D (until I get an opty with CABNE 0528 stepping ... :rolleyes: ).