The Official Venice Overclocking Thread

[conrad.maranan]

In an effort to maintain the orderliness of the AMD section, I am requesting that all Venice overclocking results be placed in this official thread. Please refrain from starting a new thread to highlight your overclocking results. If you feel that your overclocking efforts are beyond average and worthy of an individualized thread, please consider doing so in the Xtreme Overclocking section.

We do not need 1,000 new threads on the same topic. Look at what my Venice can do!...Venice 3200+ OC Fun...My Venice hits 2900MHz on air...Mr. Forum Member's Mega Venice OC Thread...The Venice/H2O OC action thread... You get the picture.

If you wish to start a thread with regard to the Venice core which also includes some other issues, dilemmas, questions, and/or concerns that have not been mentioned elsewhere, please feel free to do so.

Your cooperation with regard to this matter allows for a much more organized and systematic way to share information. Yes, this is a group effort. ;)

I will open this thread as soon as a forum member sends me (or any of the AMD section moderators) a PM stating that he/she is ready to share some results.



RULES FOR POSTING IN THIS THREAD
This thread is strictly for overclocking results with a Venice core processor. Overclocking results must include at least one screenshot along with specific details regarding your accomplishment. This includes, but is not limited to, the following data:

- Stepping and/or CPU Assembly Date
- VCORE
- Method of Cooling
- Temperatures (Software-based or Meter-derived)
- Specifications of System
- Stability Tests (SuperPi, Prime95, 3DMark, etc.)

INQUIRIES:
Data Requests - If you have any requests for additional tests or details to be included in a post, please send a PM to the author of the post to include the information you are seeking. Be sure to include the "post #" or a direct link to the post you wish to see edited.
Data Fulfillment - If you (author of a post) receive a PM from a forum member requesting for additional information regarding your test data, kindly consider editing your post to include the requested information.

[chunkylover77]

Here are some of my results with a 3500 venice on a DFI ultra D with an xp90.
http://img257.echo.cx/img257/3584/sandramembandwidth4kf.th.jpg (http://img257.echo.cx/my.php?image=sandramembandwidth4kf.jpg)http://img117.echo.cx/img117/4988/250SandraCPU.th.jpg (http://img117.echo.cx/my.php?image=250SandraCPU.jpg)http://img117.echo.cx/img117/7002/3d2.th.jpg (http://img117.echo.cx/my.php?image=3d2.jpg)
http://img117.echo.cx/img117/5716/250SuperPi.th.jpg (http://img117.echo.cx/my.php?image=250SuperPi.jpg)http://img117.echo.cx/img117/7945/2503d03.th.jpg (http://img117.echo.cx/my.php?image=2503d03.jpg)http://img117.echo.cx/img117/983/2503d05.th.jpg (http://img117.echo.cx/my.php?image=2503d05.jpg)

[Kane]

I've had some fun with my Venice aswell. Sorry but the CPU-Z images are not verified. But my results aren't that amazing, so I guess they are belivable :)

Equipment:

DFI LanParty NF4Ultra
A64 3200+ Venice "Stepping: CBBLE 0504EPAW"
2x512MB OCZ VX @ 3.4v
X850XTPe @ Stock
WD 74GB Raptor
CPU cooled by a XP120 with 18db fan

Here's a Picure of SiSoft @ Stock

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+.JPG

Here's another one of SiSoft @ 2.7GHz

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+%20300x9%20default%20volt.JPG

And @ 2.8GHz ( This is the max I can get i stable )

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+%20311x9%201.5v.JPG

Unstable but could run SiSoft

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+%20318x9%201.5v.JPG

Here's a max ScreenShot I could get ( Yeah I know, It's not verified )

http://www.home.no/jimramse/Pictures/Venice/Max%20SS.JPG

Over to some 3DMark action :) ( @ 2.8GHz, RAM @ 255 CL.2 -2 -2 -6, X850XTPe @ Stock

3DMark2001:

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+%202.8GHz%20Stock%20X850XTPe%203DMar k2001.JPG

3DMark03:

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+%202.8GHz%20Stock%20X850XTPe%203DMar k03.JPG

3DMark05:

http://www.home.no/jimramse/Pictures/Venice/Venice%203200+%202.8GHz%20Stock%20X850XTPe%203DMar k05.JPG

And Finally a SuperPI 1M ( @ 2.85GHz )

http://www.home.no/jimramse/Pictures/Venice/Super%20PI%2029sek.JPG

That's all from me, but here's a little picture of how I run it 24/7. Since 2.8GHz is the max, I feel 10x280 is kind of boring. There for I run it like this :D

http://www.home.no/jimramse/Pictures/Venice/400x7.JPG

[Gorod]

Athlon64/3006MHz , 334x9.0 , 1.65V , HTT x3 , Venice 3000+ , ADA3000DAA4BP CBBLE 0504DPAW
Vapochill LS
MSI K8N Neo2 Platinum , nForce3 Ultra , BIOS 1.6
OCZ DDR Booster Rev.2
2x512Mb DDR500 , 250MHz @ 2.0-2-2-8-1T @ 3.5V OCZ VX4000 Winbond UTT
OCZ ModStream 520W PSU

Load temps jump up to +5-8 C :eek: when heavy loaded - must check evaporator contact with CPU :confused: More result are coming soon :toast:

Stability Test : http://img36.echo.cx/img36/7008/superpi32m25m09s3006mhz334x901.th.gif (http://img36.echo.cx/my.php?image=superpi32m25m09s3006mhz334x901.gif)

Super PI 1.1 :

http://img36.echo.cx/img36/1505/superpi32m3006mhz334x90165v250.gif

[Gorod]

nice results, any prime95 done to these bad boys to test real stability? No , no prime yet . I got some better results to show , not final yet :woot: :

Athlon64/3105MHz , 345x9.0 , 1.70V , HTT x3 , Venice 3000+ , ADA3000DAA4BP CBBLE 0504DPAW
Vapochill LS
MSI K8N Neo2 Platinum , nForce3 Ultra , BIOS 1.6
OCZ DDR Booster Rev.2
2x512Mb , 259MHz @ 2.0-2-2-8-1T @ 3.6V OCZ VX4000 Winbond UTT
OCZ ModStream 520W PSU


Stability Test : http://img260.echo.cx/img260/7051/superpi32m24m03s3105mhz345x901.th.gif (http://img260.echo.cx/my.php?image=superpi32m24m03s3105mhz345x901.gif)

http://img260.echo.cx/img260/9385/superpi3105mhz345x90170v259mhz.gif

[Gorod]

26s Super PI on Venice 3000+ done ! :banana: (262MHz @ 2.0-2-2-8-1T)


http://img162.echo.cx/img162/2258/26sec6qg.gif

[Gorod]

I have a Neo2 plat. with an EVGA 6800GT (AGP) as well. If my chip shows up Friday, I will post up some results ASAP. Thanks man :toast: I am also having some weard temps. , looks funny , but its actualy bad , cause i cant tell what the real temps are . I will post a pic :

http://img241.echo.cx/img241/5057/corecenter7ep.gif
:lol:

[Gorod]

Gorod:

have u tried priming at those speeds?
maybe its not prime stable

or the chip has reached its limit??

that is why it can't run 3dmark?

I think i found the problem ... Not sure yet but it looks like the new mem. controller doesn't like this :( (had using this setting with Winchester with no problems ) That's real bad for me , cause if i set it to 133 then it's too low , if 166 - it's too high for my Mem ... :dammit: :

http://img259.echo.cx/img259/3246/snap53ob.gif

JonEapples : I had temps showing right with 1.6 official


Just benched 3DMark2001SE , looks not bad at all for 6800GT ... :woot: :)

3DMark2001SE - 32185 (http://service.futuremark.com/compare?2k1=8549745)

[Cranox]

Ada3800daa4bp
Cbble0507dpaw
1227492c50768

12 x 242 @ 1.360v

http://www.cranox.com/3800Venice/242x12=2906-1360v-Pi-29sec-65.jpg

Max That i got now ( ram is async , later i do it synced )
12 x 267 @ 1.71v
Even with voltage crancked @ 1.8v will not go higher , temps get then +1 stressed :( ( its a mach II St , so i got no clue what evap temp is only temp from smartguardian )

http://www.cranox.com/3800Venice/cpu-3205-12x267-1712v-async-65-low.jpg

[Sucka]

Got mine up and rolling. Only tested it on default volts so far. I will update as we go. Here are some default volts.

http://www.suckasd.com/computer/venice/pi.jpg

http://www.suckasd.com/computer/venice/defaultvoltage.jpg

I have some results over here (http://www.ocforums.com/showthread.php?t=383500) started.

[Sucka]

alot of preresults without prime :) give us some prime to show real stability.

That would take 12 hours, who wants to waste all that time :p

http://www.suckasd.com/computer/venice/omgorsh.jpg

[Sucka]

so far so good...

I'm hating this 11 multi, i need 12 or better for my setup :nono: Plus it probably wouldn't hurt to try to tweak my memory a bit.

http://www.suckasd.com/computer/venice/bandwidth.jpg

[mikead_99]

Can anyone show any Prime95 screenies here? Are you guys getting 3GHz, priming on phase change?

Yup. Seems they all act pretty similar. 300x10 w/1.55V set in bios:
http://mysite.verizon.net/res6otqr/sitebuildercontent/sitebuilderpictures/PrimeStable_1.55V.jpg

The next step I tried was 285x11 (3.135 GHz), couldn't get it to Prime with up to 1.81V set in bios. I'll try the middle ground some tonight. Seems like 3GHz on phase is a gimme with these, and they are probably benchable to much higher. SuperPi'ed (1M) OK at 285x11 with 1.65V.

[Sucka]

http://www.suckasd.com/computer/venice/wowzers.jpg

[Onepagebook]

AMD 3500+ venice
OS windows xp
HD wd740gd raid 0
VID: 6800ultra
PSU PC P&C 850 SSI
cooling: xp90not C :opb13:

cpu

http://www.ocxtreme.org/onepagebook/v3500p/3500pvenice.jpg

9x305 :banana2:

http://www.ocxtreme.org/onepagebook/v3500p/3500pair01.jpg

Sis cpu mark :opb08:

http://www.ocxtreme.org/onepagebook/v3500p/3500pair02.jpg

bandwidth:

http://www.ocxtreme.org/onepagebook/v3500p/3500pair03.jpg


more: 311x9:

http://www.ocxtreme.org/onepagebook/v3500p/3500pair04.jpg

little more juice 1.45v: :opb12:
http://www.ocxtreme.org/onepagebook/v3500p/3500pair05.jpg

[Rickster_64]

Air results it is!!!

Need to remove HSF to make sure its getting good contact and the AS5 is spread even but I am getting ONLY 2.6ghz from my 0515 3500+ Venice. Thats with stock voltage though. Bumped voltage to 1.55 (10%) and it seems good at 2705, primed an hour with no errors so I'll do more overnight tonight.

P.S. Heatsink is a SilentBoost K8 so its no rocket cooler, hehe. Wish I had a water setup and I am sure I could be running 2.8+ with this one. Temps with Core Center where like 125-135F under prime so I gotta check the HSF contact.

[Sucka]

Finnaly a bench it beat my FX at. This was at 3260MHz/1:1

http://www.suckasd.com/computer/venice/renderbench.jpg

[H2OGun]

Here is my first test of LBBLE 0515GPBW 3200+ running SPi 32M at 2.7GHz with default voltage. Will do more 3D testing later on.

http://premium1.uploadit.org/WaterGun//2700-1.36v-SPi32M-s.JPG

[Gorod]

Here we go guys , some Venice 3000+ tests on air with Cooler Master Hyper 6 :toast:

Hardware used :

Venice 3000+ , CBBLE 0504DPAW
CoolerMaster Hyper 6 with 1x80mm Fan at 3000 RPM
MSI K8N Neo2 Platinum , nForce3 Ultra , BIOS 1.8b
OCZ DDR Booster Rev.2
2x512M OCZ VX4000 , Winbond UTT
OCZ ModStream 520W PSU

http://img216.echo.cx/img216/6185/0029ku.th.jpg (http://img216.echo.cx/my.php?image=0029ku.jpg)http://img216.echo.cx/img216/5632/0056cx.th.jpg (http://img216.echo.cx/my.php?image=0056cx.jpg)http://img216.echo.cx/img216/3751/0109eb.th.jpg (http://img216.echo.cx/my.php?image=0109eb.jpg)http://img216.echo.cx/img216/8146/0140bw.th.jpg (http://img216.echo.cx/my.php?image=0140bw.jpg)http://img254.echo.cx/img254/9978/0206hj.th.jpg (http://img254.echo.cx/my.php?image=0206hj.jpg)

1) Default Vcore , 2556MHz - 1.36V

http://img258.echo.cx/img258/1646/2556mhz136v3rc.gif

Stability Test :
http://img258.echo.cx/img258/2721/superpi1132m28m422556mhz136v28.th.gif (http://img258.echo.cx/my.php?image=superpi1132m28m422556mhz136v28.gif)

http://img258.echo.cx/img258/3567/superpi112556mhz136v284x90httx.gif

http://img258.echo.cx/img258/497/3dmark2001253672556mhz136v284x.th.gif (http://img258.echo.cx/my.php?image=3dmark2001253672556mhz136v284x.gif)ht tp://img258.echo.cx/img258/8/realstormbenchmark200439312556.th.gif (http://img258.echo.cx/my.php?image=realstormbenchmark200439312556.gif)


2) 2650MHz @ 1.41V :

http://img170.echo.cx/img170/3751/2650mhz141v1zz.gif

Stability Test :
http://img170.echo.cx/img170/975/superpi1132m27m41s2650mhz141v2.th.gif (http://img170.echo.cx/my.php?image=superpi1132m27m41s2650mhz141v2.gif)

http://img170.echo.cx/img170/3903/superpi112650mhz141v295x90httx.gif

http://img170.echo.cx/img170/5017/3dmark2001259092650mhz141v284x.th.gif (http://img170.echo.cx/my.php?image=3dmark2001259092650mhz141v284x.gif)ht tp://img170.echo.cx/img170/9580/realstormbenchmark200440722650.th.gif (http://img170.echo.cx/my.php?image=realstormbenchmark200440722650.gif)

3) 2800MHz @ 1.60V

http://img244.echo.cx/img244/1289/2800mhz160v6nk.gif

Stability Test :
http://img244.echo.cx/img244/3043/superpi1132m26m17s2800mhz160v3.th.gif (http://img244.echo.cx/my.php?image=superpi1132m26m17s2800mhz160v3.gif)

http://img244.echo.cx/img244/9422/superpi112800mhz160v311x90httx.gif

http://img244.echo.cx/img244/5579/3dmark2001267032800mhz160v311x.th.gif (http://img244.echo.cx/my.php?image=3dmark2001267032800mhz160v311x.gif)ht tp://img244.echo.cx/img244/5339/realstormbenchmark200442992800.th.gif (http://img244.echo.cx/my.php?image=realstormbenchmark200442992800.gif)

[TheMeatFrog]

This is what I'm testing right now...I'm having kind of a hard time getting this venice stable. Any input is welcome

[H2OGun]

Managed to run 3D05 with LBBLE 0515GPBW 3200+ running at 3.0GHz with 1.55v vCore.

http://premium1.uploadit.org/WaterGun//5253-s.JPG

[Gorod]

Most stable overclock on AIR with CoolerMaster Hyper 6 i could get on my Venice 3000+ :

2850MHz @ 1.71V

http://img183.echo.cx/img183/6107/superpi1132m25m54s2850mhz171v3.th.gif (http://img183.echo.cx/my.php?image=superpi1132m25m54s2850mhz171v3.gif)

http://img183.echo.cx/img183/2779/superpi112850mhz171v317x90httx.gif

http://img183.echo.cx/img183/169/3dmark2001268032848mhz171v317x.th.gif (http://img183.echo.cx/my.php?image=3dmark2001268032848mhz171v317x.gif)ht tp://img183.echo.cx/img183/4501/realstormbenchmark200443652850.th.gif (http://img183.echo.cx/my.php?image=realstormbenchmark200443652850.gif)

[Gorod]

Nice gorod. Hope I do as good *cough better cough* with my 3000+ arriving monday. ;) Ya , it is a nice chip , wish u luck with yours ! :toast:

Update:

WoW ! :eek: Super PI goes 25s on Venice 3000+ :woot: Thats my memory limit ,will try to lower the multiplier and push this cpu higher :slobber:

http://img297.imageshack.us/img297/8127/25sec1lo.gif

[dazboots]

hi ppl new to this forum but hope this info is usefull to some.... just run super pi with my venice 3800+ and memory running
@1.5-2-2-2 and completed the test in 22 min 45 seconds......
these venice r worth every penny........
http://img125.echo.cx/img125/9285/screenhunter0407ab.jpg
did super pi 1 m in 25 seconds........
http://img125.echo.cx/img125/8906/screenhunter0337rg.jpg
and super pi 8 m in 4 min 42 seconds........
http://img125.echo.cx/img125/7320/screenhunter0015fv.jpg
http://arc.aquamark3.com/arc/arc_view.php?run=1898524330


http://valid.x86-secret.com/show_oc?id=14033
http://img225.echo.cx/img225/6425/screenhunter0038ix.jpg
http://img225.echo.cx/img225/2516/screenhunter0050xn.jpg
http://img225.echo.cx/img225/7283/screenhunter0147wr.jpg

[xxmartin]

Got this one, cut the IHS off and tested with passive watercooling.

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/venice_naked.jpg

Current results:
2600 MHz @ 1.375V
2700 MHz @ 1.475V
2800 MHz @ 1.550V (Prime95 fails after 30 minutes)

Since my Gigabyte K8NXP-SLI only allows to jump from 1.550V to 1.650V in bios, I have got 2.8 GHz only stable at 1.65V.

A little bit disappointed, but it seems that the Venice loves voltage. I will see how far this one goes with 1.65-1.75V on water.

At least I got the 28s with SSE3 Patch in SuperPI 1M. ;)
http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/superpi_2850_1m.png

Prime95 screens (A64 optimized version 24.11)

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/prime_2700@1.475.png

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/prime_2800@1.650.png


At least the 3D Benches are running fine at 2.85 GHz @ 1.525V

http://mitglied.lycos.de/xxmartin99/6800gtsli/3dmark01.png
http://mitglied.lycos.de/xxmartin99/6800gtsli/3dmark03.png
http://mitglied.lycos.de/xxmartin99/6800gtsli/3dmark05.png
http://mitglied.lycos.de/xxmartin99/6800gtsli/aquamark.jpg

[TheMeatFrog]

LBBLE 0516CPBW OEM from monarch I picked up this past Friday afternoon. Here is what I've got so far. I will do more stability testing and report back later! :toast:

[H2OGun]

Here is 5+ hour Prime @2.7GHz LBBLE 0515GPBW 3200+

http://premium1.uploadit.org/WaterGun//2700-1.45v-Prime2-Sts-Small.JPG

[politenessman]

howdy. just got my 3200 venice from monarch - two days earlier than the tracking info said - ADA3200 AA4BP
LBBLE 0516EPGW
i am just screwing around with this until my 3700 sandy retail shows up. then this will be demoted to my kid's box. just swapped out my winny for this, no other changes. this was taken on my second boot - up
http://www.flickr.com/photos/33178210@N00/12075271/
cpuz validation # 15508

notice cpu temp and vcore. using xp90 and medium speed panaflo. ambient here is around 68F. been running at this speed for around 8 hours doing light work and interweb stuff. i dont think it has much more in it on air. clocks about exactly the same as the 3200 winny. the sandra memory score seems a little shy. i will flash to a better bios for venice and do clean install, then maybe some stability stuff and 3dmark. maybe a little disappointed after big build up. see what happens after burn-in, etc.
i have never posted photos/screenies etc to forum before so if i am doing anything wrong please let me know.

very truly yours,
politenessman

3200 venice 307x9 1/1 2.5/3/3/8
xp90 medium speed panaflo
ultra d
x850xt
2x256 g.skill la 440
550 trucontrol
2xraptor raid 0
2xmaxtor 300gb 16mb buffer sata raid0

[H2OGun]

How about 32M SPi @2.8GHz? This LBBLE 0515GPBW 3200+ seems to be a very good chip.

http://premium1.uploadit.org/WaterGun//2800-1.40v-SPi32M-s.JPG

[Joe Camel]

got my 3500 today :)

LBBLE 0515 FPAW

testing in a DFI Ultra-D (BIOS 3/10p) with 1 Gig of OCZ PC5000 (DFI "special" TCCD) OCZ PS600 PSU with a TT HSF...XP-90C should be here tomorrow ;) (good thing too since its hittn 56C :eek: )

this is only about 1.5 hours of testing but...its P95ing @ 285x10 @ 1.648V (according to CPU-Z)

this set-up couldnt get a 3200 CBBID Winnie stable @ 2.4GHz and now its running @ 2.85GHz (on AIR!!)

-----------------------------------------------------------------------

ran 1 hour of P95 @ above settings...no errors....

right now im testing 320x9 (2880MHz)....seems stable (3-4-4-10)

BSOD @ 300x10 (didnt think it would go but had to try)

id thro more Volts @ her, but the temps are too high. we'll see how the XP-90C and a Nado help that ;)


--------------------------------------------------------------------------


Wow, nice chip Joe! Any results from it, or just priming it right now?
i dont have this thing networked so no screen shots (youll have to trust me)

285x10 ... 1.6V core ... 2.9V mem ... 1:1 ... 2.5-4-3-10 (too many others...but well just say loose) x850-XT @ 570/594 (mild OC)

S-Pi 1M: 30

Everest:
read: 6349
write: 3440
Lat: 38.0

SANDRA:
Mem band-W: 7611/7529
CPU: 12,378 ... 4673/6073
MM: 27,145 / 29,303

3D 01:
31,463

PS working on tightening the timings since sticks are rated @ 312x 3-4-4-10
probly over the weekend, ill thro in some UTT and "clasic" BH-5 and see how they go

got a screenshot: :fact:

http://img124.echo.cx/img124/2427/2850mhz5sf.jpg (http://www.imageshack.us)

[Rubescen]

Just received my OEM 3200 Venice from Monarch today :D

ADA3200DAA4BP
LLBLE 0516 EPGW
Z639006D50906


I'm using the XP-90 heatsink with a relatively quiet 90mm fan, and very thin layer of AS5 only, flashed the 414-3 Bios on my DFI Ultra D motherboard and it picked up the Venice on the fly, no time for messing around so I jumped straight to 290 x10 @2.9Ghz with 1.50v, can run a bunch of benchmarks and SuperPI 1M for fun but won't bother to take any screen shots because they mean absolutely nothing to me because it's not 100% stable, so scratch that, load into the BIOS again and lay the hammer down on the vcore and settle on 1.66v, but SuperPI 32M crapped out at "21 finished" then BSOD.

OK, something gotta give right? so I Back it down to 285 x10 (2850) and boost the vcore up to 1.71v, temperature was looking unbelievably good in the BIOS, so I ran the Memtest #5 and #8 for about 30 error-free passes again, then boot into Windows XP, room temperature was around 22'C and cpu temperature idle at 27'C....sweet!!! Fired up the SuperPI 32M and crunch away.......Bingo!! I hit the jackpot :D :D under load temperature is surprisingly low at only 42'C!! :slobber: Unlike the Winchester I had before...this Venice thrives on higher vcore, since 1.71v hasn't put a dent on the under load temperature I'll shoot for 2.9Ghz again with higher vcore, maybe 1.75~1.80v. I can't help but wonder how good is the 3700 San Diego that I'm going to receive from Monarch in a week or so. :D For now I'll settle on a rock solid 2850Ghz @1.71v AIR COOLED!!! and going to watch a movie...this chip rocks!!!!

:banana: :banana: :banana:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29723



Edit: I think I better off running 317 x9 @2.853Ghz, this is about as far as I'm willing to run 24/7 till I get my 3700 SD :D :D
http://www.xtremesystems.org/forums/attachment.php?attachmentid=29734



Another shot at 2.862Ghz:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=29779



This might be what we considered the 'Sweet Spot', only required 1.58v to hit 2.808Ghz on air.
http://www.xtremesystems.org/forums/attachment.php?attachmentid=29786

[H2OGun]

Keep on torturing the chip LBBLE 0515GPBW 3200+. SuperPI 32M @2.9GHz here.

http://www.anti-x.org/bbs/attachments/forumid_13/DztO_2900-1.5v-SPi32M-s.jpg

[joe2004]

Here is my 3000 with XP-120. On air that is.
I can actually go higher with more voltage but this is good enough for me.

[HousERaT]

here is my 3000+ on air...... still not broken in yet..... I hope there's more left in the tank...:D

[thesaucier]

2900MHZ stable so far. Love this chip!

[HousERaT]

Now stable at 2.7Ghz and climbing.....


http://www.xtremesystems.org/forums/attachment.php?attachmentid=29819

[H2OGun]

SuperPI 1M @3GHz from a watercooled LBBLE 0515GPBW 3200+ here.

http://premium1.uploadit.org/WaterGun//3000-1.6v-SPi1M-s.JPG

[xxmartin]

use the latest 24.11 version of Prime95 for real stability (v24.11 is optimized for Athlon64 and therefore tortures the CPU much more than any 23.x code).

Prime95 v24.11

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/prime_2825@1.650.png


SuperPI 32M (mod 1.4)

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/superpi_2820_32m.png


SSE3 gives a nice boost
SuperPI 32M (SSE3 Patch)

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/superpi_2820_32m_sse3.png

Almost 0.1V difference between SuperPI 32M and Prime95 with passive watercooling.

[trans am]

LBBLE 0516CPBW OEM from monarch I picked up this past Friday afternoon. Here is what I've got so far. I will do more stability testing and report back later! :toast:


Damn, TMF! You got a really nice 3000+ :toast:
i wish mine could do that.
Here's the same oem from Monarch. It just came today. Here are preliminary results using a Zalman CNPS7000B-ALCU. Ambient air is around 23.88c. (do you like that precision?)
1.425 x 126% DFI nf4 ut-D won't go far on stock volts.

I need to work on her a bit more... BRB

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29874&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29877&stc=1

[koei]

Had some store credits with Ncix.com and decided to spend it. Got a week 516 3000+ Venice and first boot 2.7GHz no sweat. Prime stable too.

http://members.shaw.ca/spicy/blah.jpg

[av0]

E3 3500+ @1.6 @ 2.86ghz
DFI NF4 SLI-DR
VX500 2-2-2-5 @ 3.3

It won't run stable at 265fsb and I'm positive its the ram So I might just lower the timings to avoid voiding my warrantee

[Sucka]

http://suckasd.com/computer/venice/bandwidth3330.jpg

[Sucka]

http://valid.x86-secret.com/show_oc?id=16680

[TheMeatFrog]

OEM 3200+ LBBLE 0516EPGW from Monarch
9x316 Memory running 1:1 DDR632
Air cooled by the XP-90 in my sig :)

SuperPI 1MB
http://img170.echo.cx/img170/5999/superpi1mb9ts.jpg (http://www.imageshack.us)

SuperPI 32MB
http://img170.echo.cx/img170/9503/superpi32mb2gk.jpg (http://www.imageshack.us)

[Tibu]

Here's my very first OC screenie. This is by no means the limit, just something to get started. Once I leave it Priming all night tonight, I'll keep going tomorrow. Keep in mind this is at 1.4v:

http://img.photobucket.com/albums/v428/Tibu/2.jpg

[Tibu]

Just now:

http://img.photobucket.com/albums/v428/Tibu/250fsbbenchies.jpg

[Boble76]

I got my 3500+ Venice today :banana:

Quick try (http://koti.mbnet.fi/boble76/Tietokone../Venice%203500+/2835Mhz%201.696v.JPG) 2835Mhz 1.7v

Water temperatures +27C but the processor was +50C in test. I've to check the touch of core.

Still not fast enough! :eek:

[kamui]

my 3800+ bench in AC ,XP90+Papst 90mm

Venice Step (http://kamui.kenshiro.free.fr/dfi/venice.jpg)

O/C Venice (http://kamui.kenshiro.free.fr/dfi/2.9.jpg)

[askimo]

After fighthing with my vid card I was able to overclock the new VENICE

I hand picked the cpu at the local store

ADA3000DAA4BP
LBBLE 0515FPMW

[Tibu]

My first 2.8ghz bench on air. I know it can do it at lower voltage, I just upped to 1.6v for curiosity's sake. Theres still much more in this chip, will go higher later. And ignore the low 3d01 score, I changed driver to 76.50 and lost 5000 points go figure. Ima get the XG 76.45 drivers and see if 3d01 is better.

http://img.photobucket.com/albums/v428/Tibu/255fsbbenchies.jpg

[Boble76]

http://koti.mbnet.fi/boble76/Tietokone../Venice%203500+/screenshot%209x300%202705%201.44v.jpg
And same in fullscreen (http://koti.mbnet.fi/boble76/Tietokone../Venice%203500+/9x300%202705Mhz%201.44v%20Suppa8M.JPG)

[Tibu]

My new personal record of 260FSB 1:1 with my old school 1GB of Corsair BH-5. CAN YOU DIG IT? :rofl:

http://img.photobucket.com/albums/v428/Tibu/260fsbscreenies.jpg

[Tibu]

:woot: 2.9GHZ personal barrier broken with same volts as 2.8. I think this is as far as the memory will go. Keep in mind this is on AIR with an XP-90C.

http://img.photobucket.com/albums/v428/Tibu/264fsbbenchies.jpg

[Boble76]

Venice 3500+ 9x313Mhz (http://koti.mbnet.fi/boble76/Tietokone../Venice%203500+/5min20s.JPG) SuperPi 8M 5minutes 20 seconds.

[xxmartin]

Could push my (watercooled) Venice a little higher today ... :)

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/2970.png

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/sisoft_cpu_2930.png

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/sisoft_mem_2930.png

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/sisoft_mmx_2930.png

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/superpi_2930_1m.png

http://mitglied.lycos.de/xxmartin99/A64_3800_CBBLE0513/superpi_2900_8m.png

http://arc.aquamark3.com/arc/arc_view.php?run=690897424

[s7e9h3n]

Is your memory not capable of 1:1 at 290+? What's it max out at? If you've gotta run a divider, I'd suggest upping the mult instead. My 3800+ loved the 11x mult and got some of it's best marks there. Here's what my 3800+ did @ 290x10 (stock hsf) for comparison:
http://img60.echo.cx/img60/2687/10x2908ww.jpg

[mongoled]

3000+ CBBLE 0512DPBW

Current 24/7 Setting
http://homepage.ntlworld.com/m.meliou/2900mhz_1.7v.gif

Suicide screenie

http://homepage.ntlworld.com/m.meliou/3000_mhz_CPUZ.jpg

[arj]

LBBLE 0516GPBW

DFI NF4 SLI-D
OCZ4200EL
X850XT
Watercooled (ambient around 30 degrees)

http://img.photobucket.com/albums/v625/aimanrifhan/Venice160v.jpg

[Badge56]

Venice 3200+ LBBLE 0516 running 2800 mhz stable....
One fast CPU....

http://pages.infinit.net/claude50/AUTRES/test.jpg

[vapb400]

Currently on my LBBLE 0516EPEW cooled with Zalman CNPS7700.
http://img231.echo.cx/img231/8213/280x102gn.png

Running a CPU/12 divider currently.
I can't get it into windows at 285x10 yet, and I don't wanna set the vcore too high.

Max stable at default voltage (1.36) is 250x10.

Memory maxes out around 250 (2-2-2-5), and I can get it to that speed at 1:1 and CPU/11, no luck getting it there at CPU/12.....yet.

LPEW sucks :mad:

[s7e9h3n]

Memory maxes out around 250 (2-2-2-5), and I can get it to that speed at 1:1 and CPU/11, no luck getting it there at CPU/12.....yet.

LPEW sucks :mad:
Hehehe, how about 250x12 @ default vcore? :D

http://img150.echo.cx/img150/571/3gdefaultv7gt.jpg

[Jimbo Mahoney]

Best I can do with my new 3000+

Venice 3000+ on DFI Ultra D, BIOS 414-3
512 MB G.Skill 4400 LE


ADA3000DAA4BP
CBBLE 0512DPBW


This is a week 12 2005 chip
E rev AMD64 (Venice)


http://homepage.ntlworld.com/james.waynewright/OCUK/Clipboard07.jpg

That's on a very good watercooling setup (NexXxos XP, 4.5 lpm flowrate, 26 feet head pressure, huge radiator = 0.12 C/W on CPU).

[PcCI2iminal]

DFI ULTRA D

http://img151.echo.cx/img151/5856/294hw.jpg

http://img230.echo.cx/img230/9540/33stock8bj.jpg

http://img123.echo.cx/img123/2764/venicecriminal6ja.jpg


3200+ @ 3040mhz (http://valid.x86-secret.com/show_oc?id=17748)




Asus SLI Deluxe
23449 3dmarks Venice @ 2860mhz 2x6800 (http://service.futuremark.com/compare?2k3=3956890)

11090 3dmarks Venice @ 2870mhz 2x6800 (http://service.futuremark.com/compare?3dm05=839281)

[[XC] 4X4N]

Just getting started with this 3200 from monarch, arrived Tuesday. LLBLE 0516 EPGW 2450 at default volt core. Pretty happy so far. My CBBID winnie needs 1.65v to get here. Will post max when I get there.

[[XC] 4X4N]

Max stable at default v-core looks to be 2550. Can boot into windows at 2.6, but can't pass even 1m of super-pi. Right now at 270x10@1.5v :D Running 32m pass right now. Looking for a little more stability then just 1m. If it passes, maybe I might make it to 2.8 :banana: :banana: :banana:

EDIT: Here is 32m pass 10x270. Had to up divider (245 is right at the edge for this ram, one stick of twinmoss in sig died) and add a little more voltage. Will shoot for 2.8 tomorrow.

EDIT 2: 10x270@1.58v prime stable about 3 hours, still running. Temp still hasn't reached 40. Using XP-90 and panaflo fan. My winnie with same cooling, would reach 48-49 at about the same voltage.

[arj]

I played around with DI a few days ago but I think my mobo held me back as I was using the NEO2. 3D Mark over 300HTT is a no-go. Max superpi was 3Ghz and max screenshot 3.2Ghz.

http://img.photobucket.com/albums/v625/aimanrifhan/DryIce/3GhzSuperPi.jpg
http://img.photobucket.com/albums/v625/aimanrifhan/DryIce/3200Mhz.jpg

[leotonch]

1.33V 10*270 CL2.5-3-3-8 2.7G PRIME95....
S/N#Z634606D51xxx

[xpr-k]

OC system :


DFI lp ut nforce4 ultra-d --> stock bios 1/25
AMD A64 3000+ Venice CBBLE 0512DPBW
OCZ powerstream 520W
2x512MB twinmoss 'UTT'
HIS X800XL iceqII
H²O cooled -> Cathar G4 + DD heatercore + Laing D4 + 1/2" clearflex


Results :

max HTT --> 445 HTT (http://users.pandora.be/xeper/MAX%20HTT.jpg)
MAX FSB --> 243FSB/cas2 2 2 8 @ 3.2Vdimm / 10 passes test#5 . I'm having trouble getting higher even with extra Vdimm . Its most likely bios related as i'm still on stock bios . But the rest is working without one glitch and knowing DFI its better to leave it alone then ;-) (for now)
2500mhz (http://users.pandora.be/xeper/venice/277x9(2494mhz)@1.4Vcore_stable.jpg) : 277x9@1.4Vcore (166divider op DDR)
2600mhz (http://users.pandora.be/xeper/venice/289x9(2601mhz)@1.4Vcore_stable.jpg) : 289x9@1.4Vcore (166divider op DDR)
2700mhz (http://users.pandora.be/xeper/venice/300x9(2700mhz)@1.4Vcore_stable.jpg) : 300x9@1.4Vcore (166divider op DDR)
2772mhz (http://users.pandora.be/xeper/venice/308x9(2772.5mhz)@1.45Vcore_stable.jpg) : 308x9@1.45Vcore (150divider op DDR)
2826.8mhz (http://users.pandora.be/xeper/venice/314x9(2826.8mhz)@1.5Vcore_stable.jpg) : 314x9@1.5Vcore (150divider op DDR)
2880.1mhz (http://users.pandora.be/xeper/venice/320x9(2880.1mhz)@1.55Vcore_stable.jpg) : 320x9@1.55Vcore (150divider op DDR) --> SuperPi (http://users.pandora.be/xeper/venice/Superpi@320x9.jpg) / aquamark 3 (http://arc.aquamark3.com/arc/arc_view.php?run=1294958102)
2934.1mhz (http://users.pandora.be/xeper/venice/326x9(2934.1mhz)@1.63Vcore_stable.jpg) : 326x9@1.63Vcore <--- max stable


2934@1.63Vcore isnt 100% stable , long torture session will end in a reboot . I'm gonna prime overnight @1.65 and see if it makes it.
Anything higher ends in a reboot , no matter what Vcore you trow at it . No error no bod just a black screen and a reboot .
Now all i need to learn is DDR overclocking on A64 , there's just so much to tweak ... :<

[[XC] 4X4N]

Now at 10x280@1.61v 32m super-pi pass. :woot: Will try prime later, still seeing how high it will go.

EDIT: Final update. Highest prime stable is 10x275@1.65v. Tried all the way to 1.7v, couldn't pass prime for more than 10-15 minutes. Looks like 2.7ghz@1.58v is where I'll run, not worth the extra voltage for just 50hz. I have some OCZ platinum rev 2 on the way to replace my twinmoss that died. Hoping for 10x275 or 9x300. One last screenie, 10x285@1.68v, was able to get sandra and a 1m pass of super-pi :D

[aMp]

This looks to be about average for an EPGW, sadly. I was really hoping for 2.8, especially with an H20 setup; it'll SuperPI at 2.8, but fails Prime instantly, even with 1.7v.

ADA3200DAA4BP
LBBLE 0516EPGW
3200 Rev.E 1.58V on a DFI Ultra-D (510-3)
PQI Turbo TCCD 1:1 2.5-4-3-7

http://img122.echo.cx/img122/9480/screen15ps.th.jpg (http://img122.echo.cx/my.php?image=screen15ps.jpg)

[UCmajewski]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=30592&stc=1

On a jacked Neo2 only wants to work on single channel.

LBBLE 0516 DPJW

Oh yeah stock cooler!

[ociadotnet]

LBBLE 0516CPBW 3000+ from Monarch

Other Specs:

CoolerMaster Mini Aquagate R80
MSI K8N Neo2 Platinum, 1.5 BIOS
OCZ PC-4800 2 x 512MB
Geforce 6800
74GB Raptor HDD

Running 166 divisor for now, not having much luck at 300 1:1 with this board.

http://ocia.net/playafly187/venicebench.jpg

[Burnt_Ram]

http://img95.echo.cx/img95/1723/cpuz4gr.jpg i just got this CPU today. sofar it's atleast an hour prime95 blend stable, 3dmark 2001, and 32M super pi.

[Burnt_Ram]

http://img91.echo.cx/img91/1527/superpi32m2qq.jpg

[daddy_fizz]

good so far
only took me 3 chips to get a good one

3200+ LBBLE 0515 EPGW or EGPW (i think... i forgot to write it down before i put it in the computer)

2800
280x10
1.5 V
still got some more priming to do.

~Fizz

[LoKi2k]

- Stepping: unknown yet. i have to search my photos ;)
- VCORE: 1,61v :slobber:
- Method of Cooling: Artic Freezer 64 (air)


AMD 3500+ Venice
DFI Lanparty nF4 ultra-D
2x512mb Corsair 3500 rev. 1.1 BH5
Ati 850 XT
...

http://www.arcor.de/palb/alben/20/532920/1280_6362663566663839.jpg

seems to get stable after some weeks ;)

[DesertShooter]

My 3500+ venice on air:

CBBLE 0512DPAW
xxxxxxxxxxx0068

Validation (valid.x86-secret.com/show_oc?id=18478)

http://valid.x86-secret.com/cache/18478.png

PiFast

http://80.69.76.153/albums/kraam/4131_G.jpg

:toast: :toast:

[Dani]

3500+ Venice LBBLE 0516CPAW
DFI nF4 Ultra-D with 3.10p BIOS
2*512 KHX3000 cas2,2,2,5,7,13 1:1 dual
BOXED cooler :D

http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/3500+%20Venice/SP8M%205m31s%20BOXED.gif

[oasked]

http://www.mismatchrats.com/crap/venice_3200_2.jpg

Got this thing at 275x10 so far (at 1.45V). This thing is sooo much better than my '05 Winchester. :D

CPU-Z Verified (http://valid.x86-secret.com/show_oc?id=18564).

[SDX]

Venice 3000+
LBBLE 0516 EPAW

http://valid.x86-secret.com/show_oc?id=18565

Validated at 2.8

got 3dmark at 2.8 (pic below)
34sec spi not much tweaking at all

Pissed I accidentally killed that 1 stick of Value VX because this one stick I have is great.

few pics attached

Prime stable for hours at 2.7ghz with 1.552 vcore

I love this thing.

[PcCI2iminal]

new cpu

3200+
LBBLE 0516EPGW

http://img285.echo.cx/img285/8288/2771ag.jpg

[splmann]

http://www.foto.fm/foto-41543-o.jpg



SPLMANN

[peter lu]

DFI ULTRA-D
3000+(0517):banana:
TCCD 256*2
AIR COOLING(XP 90)

http://img1.picsplace.to/img1/2143/cccc.jpg

http://img1.picsplace.to/img1/2143/eeee.jpg

[splmann]

http://www.foto.fm/foto-41917-o.jpg



SPLMANN

[All_Star]

Any results with a

LBBLE 0516 GPBW
Venice 3000+

[s7e9h3n]

Since my GF decided to beat up on my Mach2's condenser, I've had to play around with my 3200+ LBBLE 0515APAW on a stock heatsink (with a 80-70mm fan adapter):
http://img76.echo.cx/img76/3342/10x2901ey.jpg
Trying to get some stability here still:
http://img76.echo.cx/img76/1336/10x3003jr.jpg

[s7e9h3n]

All stock cooling and a 6600gt:
http://img55.echo.cx/img55/669/3dmark25k6yk.jpg

[Fintas-XP]

My new toy :)

Venice 3200+ LBBLE 0517 BPEW

System:
DFI ultra-d
Gskill PC4800LA 2x512mb

with zalman 7000al-cu stock vcore

http://pwp.netcabo.pt/Fintas-XP/2823.jpg

and now with Watercooling stock vcore
http://pwp.netcabo.pt/Fintas-XP/2845.jpg

[D3kMatrix]

System in sig:

Prime/SuperPI/Gaming/3DMark Stable
This is not the ceiling of this chip either, will post another update after some more Priming/Burning.

http://shared.sploitz.com/system/A64-v3200-0515.JPG

http://shared.sploitz.com/system/venice_prime-8hours-2800mhz-280x10_1.4v.jpg

Thats is the only screen shot I have for 1.4v @ 2800, but if u need one with more Prime time heres one at 1.55v @ 2800 for 19 hours (http://shared.sploitz.com/system/venice_prime-19hours-2800mhz-280x10.jpg)

[htkm1]

Set-Up:
Cpu: A64 3200+ Venice
Mobo: DFI SLI-D
RAMs: PDP PC3200 2 x 256Mb XBL Series (Samsung TCCD)
GFX: XFX 6600GT 128Mb
PSU: OCZ 520Watt

Cooling:
Cpu: G4 Storm Waterblock
GFX: Swiftech MCW50
Radiator: Thermochill 120.3
Pump: Swiftech MCP650

First of all the Cpu Batch No:
ADA3200DAA4BP
LBBLE 0518APDW

CPU-Z
http://img.photobucket.com/albums/v134/akulaII/A64/3200%20Venice/CPU-Z317x9-PDP.jpg

SuperPi 1M Test:
http://img.photobucket.com/albums/v134/akulaII/A64/3200%20Venice/SPi-2850-28835sec.jpg

[Seriola]

3800+ CBBLE 0513 CPBW
@1.5v, 1.45v VID 110%+
Stock AMD hsf
Speedfan and all the others show its running a wide range from 33-50C, silly amd hsf
Stable at super Pi 32M, Prime95 for ~5 hours, but 3Dmark crashed only tried it once cuz i dont care for it too much
Using Corsair XMS 3200CL v4.1 @ 2.9v and 250mhz 2-3-3-6 (these are the advertised timings for these dimms
:cool: )

http://valid.x86-secret.com/cache/18878.png
Pretty sure this baby is gonna hit 3ghz... on stock voltage I was able to throttle the clock up to 2.9 in windows before rebooting so with more volts and better cooling I'm confident I can hit my 3ghz goal :toast:

[KamE38]

hi

venice 3200+ 0517 BPEW - Stock heatsink cooled
Dfi Sli DR
bh5 twinmos


http://img267.echo.cx/img267/9169/74ksandra3yr.png

http://img264.echo.cx/img264/9973/28sec1qn.png

http://img284.echo.cx/img284/3729/29187sec0jx.png

http://img264.echo.cx/img264/774/27301488vstable0su.png

http://img284.echo.cx/img284/7243/28001568vstable7vp.png

suicide shot

http://img284.echo.cx/img284/9330/30041643ze.png

[wampir]

Venice 3000+
517 EPAW

2942Mhz- 1,58V ,WC , SuperPI 16M

http://img.photobucket.com/albums/v358/lwampir/2930mhz-16M-1123.jpg

[JfRsQ]

http://valid.x86-secret.com/cache/19293.png
http://valid.x86-secret.com/show_oc?id=19293

ADA3200DAA4BP Venice
LBBLE 0515APAW Bought from NCIX Computers, Canada

DFI Lanparty UT nF4 Ultra-D
2x 512MB of OCZ GoldVX PC4000
MSI 6600GT
PSU: Enermax 55oWatts EPS12+ 3in1, lightly modified to get adj. Vrail and to fit on the motherboard without the need of an adapter
AMD boxed heatsink :eek: , still waiting for my newer pump than I will slap this new TDX waterblock on it and push it further....
Everything is stock, not even used Arctic SIlver on Cpu or chipset... :slap:

CPU@ 1.5V
Chipset@ 1.5V
Dram @ 3.3V
Max HTT at the moment : 452Mhz :eek:

I will modify later when it will meet water :fact:

*update*
my DRAM was holding me back... a new divider and Im able to squeeze 2950Mhz. 3Ghz is bootable, but not stable at all

SuperPi 1MB: 30secs

[Jomiy]

ADA3200DAA4BP
LBBLE 0516EPGW

Can't Prime at all! :(

[s7e9h3n]

Ok, time to step things up (still on air) ;) :
http://img281.echo.cx/img281/4245/10x290spi32m0fb.jpg
Going for 27's - I have completed 1m @ 28.250, just don't have the complete screenie:
http://img31.echo.cx/img31/6974/10x295spi1mcut9lp.jpg

[Seriola]

Ok, so the hyper 6 helped me out a lot.. keeping things cool all the way down to 29/30 C at idle using low rpm. Need water cooling need better ram! 2.9 is all I can get verified, 3ghz is just a no go it looks like at any voltage.
http://valid.x86-secret.com/cache/19717.png

[s7e9h3n]

Unmodded Mach2:
http://img215.echo.cx/img215/6171/cpuz3451verified0qy.jpg

[gocchin]

3200+ 0517BPDW
2700mhz 10x270 @ 1.36v air cooled XP-90 2-2-2-5

http://www.jpop.com/gocchin/venice2700.JPG

[2||Para]

This chip is warming up well now,finaly.Doing ok on air i suppose!

http://img67.echo.cx/img67/8100/validate3nm.png

[TEDY]

http://valid.x86-secret.com/show_oc?id=19957

2800 :D

311*9 at 1.475v in bios....

http://img163.echo.cx/img163/3463/superpi1mb3111cc.th.jpg (http://img163.echo.cx/my.php?image=superpi1mb3111cc.jpg)

[gocchin]

0517BPDW 3200+ Vapo LS 10x330@1.632v BH-5 2-2-2-5 275@3.7v

cpuz verification: http://valid.x86-secret.com/show_oc?id=19999

http://www.jpop.com/gocchin/venicecpuz.jpg

SuperPi reasonably fast @ 3216mhz... with tight timings:

http://www.jpop.com/gocchin/venicesuperpi1.jpg

[coop]

3500 LBBLE 0515FPAW http://img146.echo.cx/img146/6521/32m2531fpaw3us.jpg (http://www.imageshack.us) Got a new stepping SD : CABGE 0516WPAW to try later. The 3500 LBBLE 0517APOW was ok but not as good as this one.

[Absolute_0]

First post, w00t
LBBLE0515APAW

Mine seems to be the runt of the litter, cannot go over 2.8 prime

http://img.photobucket.com/albums/v729/absolute035/Computer/better-venice-OC.gif
2.8 is fine in windows, stock Vcore set in bios

http://img.photobucket.com/albums/v729/absolute035/Computer/2.gif
2.8 will prime for a little bit but will always fail. Using 1.475 Vcore there, it ran for a while but now it seems to fail; it is inconsistent. Over 2.8 will always fail, even if I go over 1.6 Vcore it fails just as fast. Tried memory dividers and they did nothing.

This is annoying me. 2.75 Ghz is prime stable for hours with 1.475 Vcore, but 2.8 Ghz will NOT stabilize in prime for more than a little while, despite using over 1.6 volts. That is such a sudden wall :(
The ram is definitely good for more, i have ultra loose timings and i've tried all the dividers, tried increasing Vdimm and lowering it as well, but 2.8 Ghz will not become prime stable. I think i have one of the worst 3200+ APAWs but 2.75 Ghz with less than 1.5 volts, i shouldn't be complaining.

[coop]

28 sec. at 2880 with 1.425 X 113%. http://img91.echo.cx/img91/1617/28secpifpaw2hr.jpg (http://www.imageshack.us)

[fredyama]

By Cal930

M/B：EPOX EP-9NDA3J VddrMod
BIOS：5215
CPU：Athlon 64 3000+　0517EPMW
CPU Cooling：ZM-WB+Bath Pump+Ice（Water Temp2℃　Room Temo18℃）
Coolant：Deep Seawater MarineGold
Chipset Cooling：None
Memory:Aarare Original Rev1（SP）512MB×2
VGA：ATI XPERT 98 PCI 8MB
HDD：MAXTOR 6Y80P0
PowerSuplly：OCZ PowerStream 520W
Vcore：1.73V　/ Vddr：3.76V　/ Vio：3.74V
OS：Windows Server 2003


http://cal930.sakura.ne.jp/cgi-bin/c-board/file/e3000_3355_24_29.png

[sokarul]

Dont know steeping or anything but I guess its the one with the L since its a 3800+
Vcore was at 1.625
Cooling is air but I cheated since it was cold out so I put a house fan blowign in my case. room temp was at 20C.
CPU temp maxed at 55C usually around 49C.

Pi pic is my best time and so is 3d mark. iT is stable enough to run those programs. Running 2750 right now, just got done playing counter-stike. I had trouble getting 2.7 stable untill I went to 1.600 volts. I can get more system info if needed.

[KenLau]

Hi all,here is my first post :D

Venice 3200+ LBBLE 0515 GPBW
(air cooling Cooler Master Hyper6)
DFI lanparty NF4-D
Gecube X700 PCI-E 128mb
Corsair 3200XL REV 1.2 (256mbx2)
Enermax EG475P-VE

[Shark-357]

My first post :D


Here is my 3000+ LBBLE 0517 DPMW

http://img163.echo.cx/img163/3527/venice9x300145v3ft.jpg

i have a LBBLE 0517 APNW also and will post results later coz im still testing :)

[Shark-357]

Welcome to the forums! :D

Nice OC and settings!


Thx :D

here u go
http://img241.echo.cx/img241/5996/a64tweaker5pp.jpg

[187(V)URD@]

a64 3000+ venice DBPW CBBLE 0512

[mdebrito]

Here is my scores, I want mone any ideas ?
315*9 1x1 2T
http://img55.echo.cx/img55/1280/315x97vq.jpg

282*10 1X1 1T
http://img129.echo.cx/img129/9462/282x101x14yu.jpg

[Shark-357]

i sold my DPMW and bought LBBLE 0517APNW :stick:

9x305@1.65V(bios) is the last prime stable OC however it is benchmarkable 9x312@1.7V(bios)

[krampak]

- 3200+ 0517 BPEW Z....4XX
- 1'66V
- Cooler Master Hyper 6 + papst 40cfm
- 35ºC idle 49ºC full
- DFI SLI-D, Mushkin Level II 3'3V, etc


http://img211.echo.cx/img211/7399/caliente5ms.th.jpg (http://img211.echo.cx/my.php?image=caliente5ms.jpg)


It does 2600Mhz at 1'37v and 2650Mhz at 1'40v (for spi 1MB).

[Dani]

- 3200+ Venice 0517BPEW (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/3200+%20Venice/0517BPEW/LBBLE%200517BPEW.JPG)
- 1.64V Windows
- Zalman 7700CU
- DFI nF4 Ultra-D
- SP32M stable 2921MHz @ 1.64V (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/3200+%20Venice/0517BPEW/Venice%203200+%20Zalman%207700cu%202921MHz%20SP32M %201.64V.gif)

- 3200+ Venice 0517BPDW (http://koti.mbnet.fi/dani69/DFI%20nForce4%20Ultra-D/3200+%20Venice/0517BPDW/LBBLE%200517BPDW.JPG)
- 1.64V Windows
- Zalman 7700CU
- DFI nF4 Ultra-D
- StressPrime2004 2906MHz @ 1.64V for 1h10min. now, I try 24h :D

BTW, for BPDW it's second boot, never seen default speed :slapass:

[daddy_fizz]

3200+ Venice
LBBLE 0515 FPBW
http://img57.echo.cx/img57/898/cpunumber4oc.jpg (http://www.imageshack.us)

2800mhz (10x280)
http://img26.echo.cx/img26/5023/desktop9hk.jpg (http://www.imageshack.us)
1.55v bios
1.5 in windows


~Fizz

[eraser]

http://img82.echo.cx/img82/4240/32m8ct.th.jpg (http://img82.echo.cx/my.php?image=32m8ct.jpg)

My new Cpu Venice 3000+ LBBLE 0517APQW.This Test was with Ram @166Divider.my Ram can handle 295mhz 1:1@ 2.5-3-3-7-1t,but with 180 Divider i have Problems with stabilitiy if i use the same Timings :(

[Ugly_Jim]

OEM 3200+ Venice from Monarch in early May
2730 MHz, 730 MHz gain
0516EPEW
SmartGuardian says 1.61v, multimeter says 1.664v. I'm using 1.45v x 113%
Coolermaster Hyper 6
MBM5 says 45C max
DFI NF4 Ultra-D with the 510-3 BIOS, 2x512MB G.Skill LA
25h Prime95, in screenshot

[Mr.President]

ultra-d
watercooled
the temps are IDLE!!!
geil ultra-x @ 305 2,5 4 3 6

http://img81.echo.cx/img81/2199/ebay9qu.jpg

[overcrash86]

http://wowgame.free.fr/3000+%20939/LBBLE%200517%20EPAW/3000+%20LBBLE%200517%20EPAW.jpg
http://wowgame.free.fr/3000+%20939/LBBLE%200517%20EPAW/Primestable2906Mhz1.52v11H4.jpg
http://wowgame.free.fr/3000+%20939/LBBLE%200517%20EPAW/2983Mhz1.568-1.584vspi.jpg

Home made watercooling :banana:

not finisht :D

it's too hot outdoor :(

next test Max Screen, i think 3175-3180Mhz at ~1.7v soon :D

[Five-Seven]

My Venice
CBBLE 0512 DPAW
http://www.directupload.net/images/050513/sxR9gdvf.jpg

http://5-7.pyrokar.lima-city.de/liste.jpg

http://5-7.pyrokar.lima-city.de/2800%20Prime95.jpg

CPU-Z Validation
http://valid.x86-secret.com/show_oc.php?id=21161

all aircooled

runs also 2700MHz wirh default vcore

[KenLau]

Welcome to XS KenLau and all I can say is WOW. :toast: Nice results on air! Have you run any stability tests on it? At what speed? And what are your temps at the Vcore and air?????

Thanks e7e9h3n :toast:
Here is some stabitity test of this lovely baby :D
Prime stable at 2700mhz 300x9 vcore 1.39v,
and super Pi 32m pass at 2900mhz 290x10 vcore 1.52v.
As all we know ,3ghz on air was a high mountain of the Venice chips,
so I will try h2o cooling on it later,post more results soon :)

[AMD-me]

Heres my max stable. Bought from Cheif Value OEM

Any Idea on how many watts a 2800mhz 3000+ LBBLE 517 at 1.712v is? :lol:

[TheMeatFrog]

Here are some initial results of my 3000+ 0516GPEW Retail from cheifvalue...
http://img226.echo.cx/img226/6969/gpew2700prime1qv.jpg (http://www.imageshack.us)
I'll report back later with more results!

[coop]

3500 Lbble 0515fpaw also a 25min 32M Super Pi and an Aquamark screen below. Don't know how much more it can go, getting ready to paint with liq. electrical tape and cut some foam. http://img230.echo.cx/img230/4319/29387qa.jpg (http://www.imageshack.us)

[A Scream]

Well as I'm packing to go out to see the Grand Canyon. I decided to hook up my Vapo to my 3800. Here are the results of about a qauter of a day's OCing. Being that my computer is not hooked up to the internet, I just have screenshots. I'll be back in around 10 days. I'll get em verified then.

[Hinnavaatlus]

So i buyed to Venice 3000+
stepping: LBBLE 0516 CPCW :fact:
Z637478D50371
cooled with Hyper6
home temp: 26
CPU temp: 57
http://www.zone.ee/mardo53/Arvuti/Benchmark/Venice/31,266s.PNG?2
i gived 1,7v but its bit slower as that conf
http://www.zone.ee/mardo53/Arvuti/Benchmark/Venice/31,203s.PNG?2

i have bad mem, its D43 :rolleyes:

im bad in english :wth: :dammit:

[2||Para]

http://valid.x86-secret.com/show_oc?id=21657

Not to bad on Geil Value Ram and Air Cooling.

[AllBrain]

Here is my new 3200+ doing 2.83 Ghz. Might be able to get it up to 2.9 Ghz, if the damn MSI board will give me a stable vCore. :-(

http://img.photobucket.com/albums/v313/AllBrain/Venice/30.jpg

[overcrash86]

http://img77.echo.cx/img77/4016/primestable3006mhz44de.jpg

just watercooled :banana:

[coop]

water 0515 FPAW http://img291.echo.cx/img291/8131/3ktwk2kl.jpg (http://www.imageshack.us)

[Vroom]

AIRCOOL : XP90C with 90@5V
IHS REMOVED idle 23°C 21°Room (mobo on a table)
http://www.yamafoto.com/users/vroom/images/12392/skcic0xhtdybwr1ybxzpr7n9cyc9xxkh.gif

[SET]

Firs Test.

3000+ LBBLE 0517APJW @ Thermaltake Venus 9

http://img157.echo.cx/img157/8484/1079696qd.jpg (http://www.imageshack.us)

Until Soon

[Surerbug]

my venice 3200 with vapo ls

ADA3200DAA4BP
LBBLE 0517BPEW

http://img140.echo.cx/img140/7062/prime32ghz128h28ue.jpg (http://www.imageshack.us)

[cpulloverclock]

http://cpull.free.fr/Overclocking/3283MHz-Venice-milli-superpi-25.359.jpg

just the link cuz 1.7mb
http://cpull.free.fr/Overclocking/3290MHz-Venice-milli-superpi-25.359.jpg

http://cpull.free.fr/Overclocking/3296MHz-Venice-cpumark-399.jpg

http://cpull.free.fr/Overclocking/Screen-Venice-3474MHz.jpg

soon 100MHz+ but maybe limited by my chip :mad:

[esdee]

3500+ Venice
Prommie r507 re gassed (thanks hipro5)
Kingston HyperX BH5 (good old) 2x512MB

did a WR (with the first attempt, too much headroom on this CPU) 3472.86MHz --> http://valid.x86-secret.com/show_oc?id=23069

My best Pi run so far
http://www.xtremesystems.org/forums/attachment.php?attachmentid=32416&stc=1

[Jomiy]

new chip.
3500+ 0515FPAW

For some I can't pass Super Pi 32M at 280x10. It BSOD/froze in Windows after the 24th loop! :confused: In BIOS:
2.9v, 2.5-4-6-3-7-15-3-2-1-2-2560-1-E-A-0-7-2-8-5-256-D-16-7-D

Still tweaking so I can get 280x10 :stick:

[cpulloverclock]

http://cpull.free.fr/Overclocking/3317MHz-Venice-cpumark-402.jpg
http://cpull.free.fr/Overclocking/3303MHz-Venice-milli-superpi-25.156.jpg

[duploxxx]

current venice 3000+ oc 2840@1,52v 9x315
but this is not the max of cpu @ that vcore its just my tccd @ max 1/1

more to come...... also need to test my sd fast :slap:

ada3000daa4bp
cbble 0512dpbw
1229488c50073

http://users.telenet.be/duploxxx/oc/venice%203000@2840%201.52v%20315x9%202.5-4-3-8.jpg

duploxxx

[duploxxx]

update:

3000+ cbble 0512dpbw

oc 2963 for the moment at 1,58v on air
http://users.telenet.be/duploxxx/oc/2963%201.58v%209x329%20166dev.JPG

duploxxx

[Hinnavaatlus]

http://www.zone.ee/mardo53/Arvuti/CPU%20Bench/1M/2922Mhz.PNG?2
i have 11Mhz more now :D :woot: :clap:

[exscape]

http://web.telia.com/~u18411604/venice.png

Best super pi run
http://web.telia.com/~u18411604/superpi.jpg

Highest suicide shot (verified)
http://valid.x86-secret.com/show_oc.php?id=23459

LBBLE 0517DPMW, aircooled, info in first pic :)

[blackjok3r]

Heres my 32M SuperPI Run. :banana:
25m 31.031s blackjok3r[2867Mhz 3000+ 90nm Aircooled- KHX3200K2/256 @ 261Mhz]
http://www.lifestyleinteriors.org/hostedsite/25m%2032M.jpg

I also have this 1M on air cooling, Highest I have seen on air too. :D
28.891s blackjok3r[2936Mhz 3000+ 90nm Venice Aircooled- KHX3200K2/256 @ 266Mhz] Sorry CPU-Z etc. Isn't shown in this screenshot. :nono:
http://www.lifestyleinteriors.org/hostedsite/28s 1M.jpg

All these results were acheived on a modded Arctic Cooling Freezer64 which costs only $44 Austrailian Dollars. :banana:

[JediMaster]

Results from an A64 Venice 3000+ LBBLE 0517EPAW doing 3GHz on air aided by an XP-90 and a room-a/c.

Just a simple 1M SuperPi shot at 3G for now - prime stability will probably need more volts and better cooling. Waiting for the temps around here to show some mercy !

http://img165.echo.cx/img165/6185/x9h334t3438p29mr.th.png (http://img165.echo.cx/my.php?image=x9h334t3438p29mr.png)

CPU-Z validation:
http://valid.x86-secret.com/show_oc.php?id=24151

This is a 32M SuperPi run with cpu = 9 x 290 MHz, 2 x 512 MB PDP @ 2.5-3-3-8 1:1 1T 2.7V:

http://img165.echo.cx/img165/2415/x9h290t2p5338all27zi.th.png (http://img165.echo.cx/my.php?image=x9h290t2p5338all27zi.png)

and it's CPU-Z validation:
http://valid.x86-secret.com/show_oc?id=24289

[Absolute_0]

Jedi, you can do 3 Ghz on air but you need 1.48 volts for 2.61 Ghz? i can go over 2.63 Ghz with stock voltage but i still can't go as high as your chip...

Anyway here is my max stable for an extended period of time, i bet prime could have run longer but i dont have infinite time
http://img.photobucket.com/albums/v729/absolute035/beach/2.jpg

And here is my max suicide so far, 2.97 with 1.60 volts
http://img40.echo.cx/img40/6974/297ghz0iw.jpg

[davidian]

http://img137.echo.cx/img137/3193/118ay.th.jpg (http://img137.echo.cx/my.php?image=118ay.jpg)

...higher soon

[jcpsad]

Fastest SuperPi so far (CPU-Z Verified (http://valid.x86-secret.com/show_oc?id=24074) )
http://panelo.com/images/super_pi_30.172_24074sm.jpg

3DMark2001
http://www.panelo.com/images/benchmark_3dmark2001.jpg

3DMark03
http://www.panelo.com/images/benchmark_3dmark03.jpg

3DMark05
http://www.panelo.com/images/benchmark_3dmark05.jpg

Sandra + Temps + CPU-Z
http://www.panelo.com/images/benchmark_sandra.jpg

[Zeus...]

Fastest SuperPi so far (CPU-Z Verified (http://valid.x86-secret.com/show_oc?id=24074) )


Nice overclock - what about prime95 ?

I can do - 2800 and 2900Mhz


http://valid.x86-secret.com/show_oc.php?id=24754 http://valid.x86-secret.com/show_oc.php?id=24752

and 2700 will do superpi32M and will bench 3dmark03 (3dmark05 it wont) but prime 95 large ftts seems to sort out the ones that BSOD and the ones that dont IMHO

[davidian]

Today I tested 2800MHz.

http://img146.echo.cx/img146/6751/28001456vprimestable3nz.th.jpg (http://img146.echo.cx/my.php?image=28001456vprimestable3nz.jpg)

...more soon

[Minnyboy]

Here's my 3200+ Venice... Haven't tested for max yet... Just playing around ATM..

Codes:
0518 LBBLE
Vapochill PE TI
XP90 & 92mm Tornado
rest of specs in "his" rig in sig...

I can't remember rest of the date code, posted somewhere around here...

So far 2.65GHz @ 1.488v (as reported by SpeedFan)

50 hours Prime95 stable plus 3DMark03 loop at 1280x1024...

Here's some screenies of 3D01 ^ SuperPI (all tests) & PiFast as well:

[sluggard]

3000+ BH5@3,73v ultra-d vapo LS

1M
http://pk.robotron.ee/26.985.png

2M NB!- mem-timings should be same as on previous screenshot ;)
http://pk.robotron.ee/62.641.png

[Benny Lodewijk]

0517 APHW LBBLE on air with Gigabyte G-Power Pro Cooler @ 3200 rpm, suicide screehshot

http://img.photobucket.com/albums/v648/b3nnylase/3GHZ.jpg

Validation : http://valid.x86-secret.com/show_oc?id=25623

[5-Clicks]

benny - do you use a Tagan 480w? SmartGuardian shows my +12v rail really low too...

here is the venice i just sold: LBBLE 0516CPBW
http://img296.imageshack.us/img296/6721/300026ghzvenice0516cpbw32m8kq.jpg (http://www.imageshack.us)

pathetic. :shakes: i didn't raise the NB voltage though, but still...

[eage]

my 360w psu got a very nice rails then!!look!!no brand 360w

[TheMeatFrog]

For the most part I've been with out a decent set of ram since the day after I got this chip over 3 weeks ago. :slap: Since my new set of LEs arrived from OPB on the 1st and then earlier today the 7/2 bios was released I just had to play! :banana: I mean after all I've set a WR with this chip but we still haven't got to know each other. :p:

Warmup, since the 0515 APAWs are know for a weak mem controller I just wanted to stress the CPU and not push the ram yet. :p: BTW this is being Air cooled by my XP-90 in my Antec SOHO server case with the door closed. :D

SuperPI 32M
10 x 291 @ 1.55v
9:10 (180) mem divider
http://img175.imageshack.us/img175/8153/291ghz32m4am.jpg (http://www.imageshack.us)

Time to push the memory and mem controller! :toast:

SuperPI 1M
10 x 291 @ 1.52v
no divider
http://img175.imageshack.us/img175/757/291ghz1m9vx.jpg (http://www.imageshack.us)

1M at 2.91GHz was no problem as I expected but I was concerned about 32M...

SuperPI 32M
10 x 291 @ 1.55v
http://img175.imageshack.us/img175/4308/291ghz32m12qz.jpg (http://www.imageshack.us)

I was suprised at this result. I did not have to change a single timing. :toast: Lets move on to my final and my personal favorite test, Max 1M time. :D

SuperPI 1M
10 x 293 @ 1.52v
http://img175.imageshack.us/img175/1580/293ghz1m6jt.jpg (http://www.imageshack.us)

I could smell a 28 second 1M but I just couldn't pull it off. That should just about wrap it up, the pictures speak for themselfs. If everything goes according to plan I should have a 3000+ 0517 and some RedLine to play with sometime next week. :banana: Maybe with some RedLine running at 260MHz+ I'll be able to break the 28 second 1M mark on air so stay tuned! :cool:

[eage]

here is my screen shots!!anyway i cant hit 3G,in case my PSU is a :banana::banana::banana::banana::banana: 360W Thermaltake 20pins dude anyone can help me out ??i can get fully stable with 2.95G on 1.55V what do i need for more clocks??i use stock AMD Fan now.my BIG TYHOON sold:(but samething only increase 6C on stock votage!

[exscape]

As posted in the 24hr primestable thread :)
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.

http://exscape.org/2800.png

[eage]

this one ?prime95 i can do more than 30hours ,but but.....i forgot to take a shot i have this one now. :stick: http://i16.photobucket.com/albums/b17/EAGE1981/DSC01076.jpg
http://i16.photobucket.com/albums/b17/EAGE1981/DSC01131.jpg
http://i16.photobucket.com/albums/b17/EAGE1981/DSC01124.jpg

[eage]

As posted in the 24hr primestable thread :)
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.

http://exscape.org/2800.png


this is mine 1.43V on AMD stock,too hot temp~~~anything greater than 55C will frozen .
http://i16.photobucket.com/albums/b17/EAGE1981/DSC01114.jpg

[tomati]

here is mine 3200+ 0517 bpew

ihs off ,26°c ambiant t°

spi 32M

http://img242.imageshack.us/img242/6914/spi32m280016v1ta64tweaker8rz.th.png (http://img242.imageshack.us/my.php?image=spi32m280016v1ta64tweaker8rz.png)


prime 48h

http://img249.imageshack.us/img249/5495/48hprime28001584vfinal6qc.th.png (http://img249.imageshack.us/my.php?image=48hprime28001584vfinal6qc.png)


edit : prime screen

[4rory]

I took out my 9800pro and poped in an old pci graphics card, it allowed for some better clocking, pc didn't shutdown at 1.65 anymore or 1.7 but i think 1.75 did shut down this is all voltages selected actually is -0.1v, I was able to get it to 3.2ghz before it restarted, didn't get a screeny tho but, On my way there I stoppedd at 2.99ghz for this.
http://i21.photobucket.com/albums/b275/4rory/wahoo1.jpg
I forget what the ram was at, this is a bad screeny I know but I had to do it twice lol becasue I clicked ok the first time after it was done.\\

Right now I got 18amps on my 12volt line, and 480watts total, Should I go down to 450 watts and 26amps on 12volt line, or should I go up to 520watts and more amps on the 12volt line.

[Absolute_0]

LOL 13A? wow thats low how many amps does that antec 550wat have? Right now I'm leaning for the 520modstream ocz.

Nice clocks there 4rory. And to think earlier you mentioend that you had a bad memory controller and had to use 1 dimm with max divider to go past 2.9, now you say you hit 3.2! Whatever you changed, excellent improvement, you've got a fine chip.

Yeah, you need something with more amps on the +12V rail. Modstream isn't bad, do you have the money for the 520 powerstream?

Anyhow, to stay relevant, here's my latest
0517 APJW 3000+ @ 2.86 Ghz
http://img.photobucket.com/albums/v729/absolute035/My%20Space%20shiat/2.jpg
Now i am officially prime stable here, i have never let it run that long, no patience. Usually i run with less voltage because most of my tasks aren't as demanding as prime95, nothing important on my PC so works fine.

[OverClocker_gr]

http://briefcase.pathfinder.gr/download/OverClocker2/16476/450380/0/32m%403240.JPG

http://briefcase.pathfinder.gr/download/OverClocker2/16476/450381/0/spi+1m+%403251+25sec.JPG


These benchs are old and the vcore was way high my last tests with phase was 3250@ 1.66v...now i am with modded stock hsf because my single stage phase has a small prob.....

[jcpsad]

lowered my vcore a bit... 2808mhz at 1.63v

http://www.panelo.com/images/2808ghzsm.jpg

[starostise]

here is my new venice 3000+ 0517DPMW baught last week in a shop in Paris:

http://img129.imageshack.us/img129/7387/occt134v2700mhz0517dpmw2zk.th.jpg (http://img129.imageshack.us/my.php?image=occt134v2700mhz0517dpmw2zk.jpg)http://img129.imageshack.us/img129/6921/2005070904h07cpugraph0oy.th.gif (http://img129.imageshack.us/my.php?image=2005070904h07cpugraph0oy.gif)http://img129.imageshack.us/img129/7836/2005070904h07voltcore5ej.th.gif (http://img129.imageshack.us/my.php?image=2005070904h07voltcore5ej.gif)
http://img147.imageshack.us/img147/4627/2005070904h07casegraph5xq.th.gif (http://img147.imageshack.us/my.php?image=2005070904h07casegraph5xq.gif)http://img147.imageshack.us/img147/6528/2005070904h07volt31mq.th.gif (http://img147.imageshack.us/my.php?image=2005070904h07volt31mq.gif)
http://img147.imageshack.us/img147/22/2005070904h07volt53uu.th.gif (http://img147.imageshack.us/my.php?image=2005070904h07volt53uu.gif)http://img147.imageshack.us/img147/4936/2005070904h07volt125vq.th.gif (http://img147.imageshack.us/my.php?image=2005070904h07volt125vq.gif)


I'll see what it does with sp2004 when I'll have the time but somebody else have a venice 3000+ which pass OCCT at 2700@1.34V in air? :banana:
room temp was about 23°C

I saw that peter_lu had 2800@1.4V but the screen shows that he ran sp2004 for just 1min

[cpulloverclock]

update for my 3000+ 0517DPMW

soon 3.7GHz on cascade

http://membres.lycos.fr/cpulloverclock79/Informatique/27.422.gif

frequency max spi 8M = 2983MHz but 5'02"1XX
http://membres.lycos.fr/cpulloverclock79/Informatique/5.00.875.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/24.17.gif

[TheMeatFrog]

3000+ 0517APCW
Air Cooled by XP-90
SuperPI 32M
http://img144.imageshack.us/img144/5537/redline051731532m4nv.jpg

[Leverpospade]

3000+ 0520 EPMW
DFI NF4 ultra
1x512 MB A-data PC4000 (Have almost been killed, the only run memtest at max. DDR400).
Vapochill SE

24/7 - It haven't crached og lockup once.
http://i10.photobucket.com/albums/a120/Leverpospade/3GHz32M.jpg

My max screenable - so far. I can't get my FSB over 350 (This was med by blowing a 120 mm fan at the chipset cooler).
http://i10.photobucket.com/albums/a120/Leverpospade/33GHz.jpg

[[XC] 4X4N]

A new high for me :woot: Benchable 2.91 on air. Fails prime right away, but is fairly stable. Also a 32m at 2.8 which is 100% prime stable.

[LikwidKool]

Alrighty. I received a 3500+ CBBLE 0512 DPAW yesterday. So far so good. I can pass 8M Super Pi up to 2.9ghz (290x10 1.55v) If it passes 8M then it will do everything I need without a hiccup. 32m is just to damn long!

I can get a suicide shot at 3ghz but I can't do much other than browse. I tried 300x10 and 273x11 but nogo either way. Not to bad for a second hand cpu that I bought here for a great price!!! I have only had one other 2.8ghz+ cpu and it was a 3500+ claw that ran to damn hot. I am psyched to finally get a low voltage cool running 2.9ghz cpu! :toast:

[Cisko]

Dfi nF4 ultra-d
tccd adata pc4500
watercooling

@vstock
http://cisko08.free.fr/pc/venice0512/9.310%201.4v%20occt%20ok.PNG

:banana:

[by -=Merlin=-]

Hi

http://hslab.pl/Kain/mer/14.JPG

http://hslab.pl/Merlin/Pics/FSB_333.jpg

Merlin ;)

[Perc]

Merlin: could you please tell us where you got this gem from? ewiz is selling the 3000 venice oem for 119$ and free shipping. can you imagine getting lucky and get a week 19th 3000 venice like this for 119$ and hitting 2900+Mhz. i'm tempted to order the 3000 venice from ewiz :).

this chip right here week 19 from ewiz its a 0519DPJW LBBLE and heres the oc so far with a few benchies....

peace perc,

[Absolute_0]

My 0517 APJW running with a little more volts at 2.9 Ghz
2 hours prime stable and still going
(still air cooled by XP90)
http://img.photobucket.com/albums/v729/absolute035/Computer/2903-2-hours.jpg

[gundamit]

I picked up one of the Venice 3000+ CPUs that was being discussed in the Deals forum. At $115 I figured I could take a chance. I got a YBBLE 0524DPBW.

Early results are okay but not great. I'm SuperPi 32M stable at 2.7ghz on air. I think I'm pretty near the limit because I'm giving it almost 1.7v (1.55+13%) and that's usually where diminishing returns kick in hard. Surprisingly the Thermalright XP-90/Zalamn 92mm combo I'm using seems to be holding the temps at load to a MBM reported 42c.

I'm using the the shipping bios (3-10) on this new Ultra-D mobo and got my OCZ Platinum Rev.2 TCCD out of retirement. Still trying to tweak the settings a bit.
http://img299.imageshack.us/img299/8396/300x9ybble0524dpbw4gz.jpg

[gundamit]

I hand picked this Venice at a PCClub in San Leandro CA. Its a LBBLE 0517GPQW. I swapped out the YBBLE 0524DPBW and put this one in the very same rig. Thank goodness this handpicked CPU outperformed the less expensive one I bought "blind" from E-Wiz, otherwise I would be hitting myself in the head with a hammer right now. Looking good on air.

http://img273.imageshack.us/img273/6840/285x10lbble0517gpqwair9qa.jpg

I just finished leak testing a Swiftech kit and I expect to see a little bump when I get it hooked up with this CPU. Hopefully I'll post results sometime this weekend.

The Winnie in my sig may be looking for a new home soon because my Mach 2 will be mating with this CPU whenever ATI gets their new mobos and video cards out. :)

[davidian]

Next test:
http://img224.imageshack.us/img224/7219/28801552vprimestable1vu.th.jpg (http://img224.imageshack.us/my.php?image=28801552vprimestable1vu.jpg)
...more soon (I hope) ;)

[Perc]

i got a ADA3000DAA4BP LBBLE 0519DPJW Z649556E 53772 venice from Ewiz. i just got started playing with the cpu and so far im able to run 3d stable at 2470mhz 270x9 2.5-3-3-7 using the stock v-core of 1.36v. ive tested the memory all the way up to 300htt at 2.5-4-4-7 1T 2.7v so now i just need to throw in a divider and see how high the chip will actualy run? i know the meory will run 300htt and i suspect more with a divider so my fingers are crossed for 2900-3000mhz :)


peace perc,

[ZX7891]

heres an attached screeny of my 0515FPDW
EDIT:on stock cooler
http://img.photobucket.com/albums/v518/ZX7891/screen.jpg

[atreju]

Here is mine;
3000+@2900
LBBLE 0516DPMW
1.68Vcore
chilled water, 7/8c idle 22/23c under load
DFI Ultra-D (no SLI mod) 7.04 bios
KHX 3500 BH5@241.5 2.2.2.6 3.4v (max 260 2.2.2.5) 3.4v
Leadtek 6600 non-GT

and this is the screen; (it's too hot here in Turkey, so these are not the max)

[by -=Merlin=-]

OMG WOW

I work still new bios DFI NF4 ram tabl 3.16

http://hslab.pl/Merlin/Pics/FSB_375.jpg

Merlin

[Mr.President]

prime @ 3ghz
http://img318.imageshack.us/img318/1337/05203ghzprime5an.jpg

& superpi 1mb (wenn das ding nur 1mb chache hätte......)

http://img265.imageshack.us/img265/4764/unbenannt39cs.jpg

[fxr91]

3000+
ADA3000DAA4BP
LBBLE0521APMW
DFI NF4 Ultra-D

Air cooling is running at a low speed so my ears don't bleed (Venus 12), which is why my temps are getting a bit high. Intend on getting my w/cooling out and strapping it in place again, just need to find time. Also will be strapping my LS to it just to see what it can do with some sub zero cooling.

Ram is woeful, so the system running at 150 divider, but hopefully that will be resolved in the next couple weeks ;) BTW, this is a stable 24/7 system, not a suicide.

[Bamboo]

Those are some great OC you guys have. :woot:

Me, on the other hand, like to do OC at the cooler side, do not like to raise the voltage to over 1.4.
http://members.shaw.ca/tsopin/0718053.jpg

[overcrash86]

OMG WOW

I work still new bios DFI NF4 ram tabl 3.16

http://hslab.pl/Merlin/Pics/FSB_375.jpg

Merlin

http://wowgame.free.fr/3000+%20939/LBBLE%200517%20DPMW%202eme/chilled/new%20iso/sisoft8209-8125BH286.7Mhz3.9v3153Mhz.jpg

Merlin BIOS 03/07/05

can i test your new 10/07/05 merlin ?
where can find it :confused:
(or PM me to test :toast: )

[Absolute_0]

my 3000+ 0517APJW
stuff in sig, except watercooled
Storm G4, Maze4, D5, 2-302 heatercore

4.5+ hours prime95 @ 2.95 Ghz w/ 1.66 volts
http://img.photobucket.com/albums/v729/absolute035/Computer/WC-overclock-1.jpg

[knob]

my results.

LBBLE 0517 GPMW. Its not flash i know

http://i7.photobucket.com/albums/y275/knobi/2.jpg

[knob]

latest. Dont look at the vcore. Terrible isnt it? Running 510-1 bios

http://i7.photobucket.com/albums/y275/knobi/276caa4a.jpg

[Absolute_0]

Got 2.96 Ghz fully stable

I clockgenned up in windows before i started SP2004 running, so the CPUZ reading is correct, its 2955.3 Mhz. Also SP2004 is saying the incorrect time, i started ~1:28 AM and let it run overnight.

http://img.photobucket.com/albums/v729/absolute035/overclocking/2.jpg

[eage]

http://i16.photobucket.com/albums/b17/EAGE1981/1.jpg

new week 0525 APMW E6 core!i can do 1.26V but prime95 only stable 5hours!! :stick: :banana: :banana: :banana:

[afireinside]

http://afireinside.evilspork.net/AFI/venice/GCS0010.jpg

3500+ LBBLE 0519 venice under dry ice -65C load

[Mysterfix]

Well I've got a new board on the way as this one has some issues. But I still got a pretty good OC out of this thing with my Vinnie. :D

http://img237.imageshack.us/img237/4501/screenhunter13ml.jpg (http://imageshack.us)

Chip: LBBLE 0517

Colling in sig

[Absolute_0]

3 Ghz is stable with 1.73 volts...

Here is 2.99 stable with 1.7 volts, and i'm trying to bring the Vcore down even more

http://img211.imageshack.us/img211/5645/29911hours2pv.jpg

[trans am]

air cooled just got this from newegg
retail 3000+
hyper6 cooler

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35335&stc=1

[umnik]

hi all
my 3000+ ybble0523cpgw
asus a8n-sli

294х9 :brick: Very badly I in a shock dear edition

http://i12.photobucket.com/albums/a215/umnik/.jpg

[oasked]

Yay! :)
http://www.mismatchrats.com/crap/so-yay.jpg
http://valid.x86-secret.com/show_oc?id=30887

Finally got my RAM working at 300 (Super Pi 32M and OCCT stable so far), thanks to the new 623-3 BIOS for the DFI nF4 Ultra-D. CPU is still at the same speed as before, it hates going much higher, the voltage just ramps really after this point.

I should be able to lower the CPU voltage a bit as I had it at 270x10 24h stable at 1.45V before. :)

[boblemagnifique]

Venice 3000+ CBBLE 0512 DPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbble0512dpbw/vi3000.jpg


2700mhz at 1.37v (300x9)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbble0512dpbw/2005-01-02-17h25-VoltCore.png


2820mhz at 1.5v (313x9)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbble0512dpbw/2005-01-01-02h51-VoltCore.png

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbble0512dpbw/2820mhz.png

[SIOUX]

here´s my 3000+ 0529 :) still testing...

[Xyus89]

here's my 0528 GPFW , at 2700mhz it freezes/reboots (I think a bad cpu :( )

http://img33.imageshack.us/img33/9903/superpi33s0uc.jpg


Xyus

[Mysterfix]

This chip will do 2.832ghz stable but doesn't play nice with the ram at that speed. Both were tested seperately and ran fine but won't run together at max cpu speed.
3000+ Venice LBBLE 0517APJW
VCORE 1.74v (Reads higher in cpu-z pick due to fluctuation)
Water cooled
Temperatures idle 30ºc-31ºc/load 40ºc-41ºc
Specifications of System: In sig
Stability Tests: Prime95, 3DMark 01 03 05, Memtest86

http://img388.imageshack.us/img388/9413/screenshot0016mn.jpg (http://imageshack.us)

[Dani]

Tried 2.8GHz @ 1.52Vcore with Zalman7700CU..
3200+ Venice 0517BPEW

OCCT --> HERE (http://koti.mbnet.fi/dani69/OCCT/DFI%20nF4%20Ultra-D/3200+%20Venice%200517BPEW/280x10%201.52V/)

[Dave_Sz]

here's my 0528 GPFW , at 2700mhz it freezes/reboots (I think a bad cpu :( )


Xyus

How is it a bad CPU? It runs fine at stock speeds doesn't it? That's all it was intended to do.

[Ferry82]

How is it a bad CPU? It runs fine at stock speeds doesn't it? That's all it was intended to do.

Where here at xtremesystems.org not at

www.i-love-running-my-computer-stock.org :D

[Swiftdeathz]

Here is mine. Still using stock AMD cooler. I am not sure if my memory is tweaked to the max or not. I know that I can't budge on the 2.5,3,3,8 timings and can't get 1T out of my ram but not sure if the other advanced timings could use some tweaking. I'm getting an XP-90 with panoflo and as5 coming to me, hopefully then I can squeeze a bit more out of it. It's 100% stable in all games/folding@home I throw at it. :D

http://img374.imageshack.us/img374/2738/venice25507js.jpg

[prodigy_]

CPU: Athlon 64 3000+
Venice, Rev. DH-E3, LBBLE 0520BPMW, 1800@2700 1.65V (CPU-z uderscores)
CPU Cooler: Tt BigTyphoon

Max Idles: 35-36 *C
Max Loads: 54-55 *C (S&M v.1.7.2, High Priority, 100% Load)

Specs:
MB: DFI LP NF4 SLI-DR (Rev. AB0), BIOS Rev. 623-3
RAM: Kingston 2x512MB KHX PC3200 (Winbond BH-5) 2-2-2-5-1t 200@193 (CPU/14) 2.70v
Video: PCI S3 Trio64 V2/DX 1MB
HDD: IBM 60GB PATA-133 (IC35L060AVER07-0)

---

Comments:
Tested with Prime95 v.24.13 (Large FFT, High Priority).
2750 is unreachable. :stick: I'm not impressed with this Venice to say the least. :(

[Xyus89]

Hi,

I've got a venice +3000 but I can't see my rev with cpu-z 1.30.. ?

xyus

[davidian]

Try use CPU-Z ver. 1.29.

[vexvegaz]

here
3200+ venice

http://valid.x86-secret.com/show_oc?id=34032

http://veytrex.net/1/cpu2.gif

[d4n13l]

Did someone test a 3200+ E6 already?

[minirac]

I have 3000+ LBBLE
DFI nf4 Ultra-;D
2*256MB NItro pc 3600 CL3
gf 6600gtextreme ledetek
Zalman 7700ALCU
BIOS 623-3!


I go to 2817Mhz at 1.776V SUPER PI 1MB stable! http://www.freeweb.siol.net/cpotocar/best2.JPG

Then 2745Mhz at 1.744V super pi 32MB stable! http://www.freeweb.siol.net/cpotocar/2745Mhz-1744v-32mb-28min.JPG

Max BOOTEBLE freq: 2864Mhz vith 1.776V i don'g get higher with AIR Cooling!

My ram IS in F..K..G they don't go over 210 at CAS 3 at 3v???:mad:

[fxr91]

Wow, 1.744v to get stable at 2.745Hz :eek:

Personally I would prefer a lower vcore on Venice than that...

[onewingedangel]

just oc'ed my 0512 dpbw venice 3000+, to 2.8ghz (well 2799mhz to be exact) with 1.45v, - load temps after 10 hours of prime top out at 41degrees with an xp120 - but cheappy silicone goop until I lapthe heatsink properly at which time as5 will be used. Boosting voltage to1.475 doesnt seem to help to get 2.84 stable, is it worth trying more voltage to see if it can go higher, or would I see only small differences from here. Anyway my ram holds me back (currently on a divider running at 466 at 2.5-3-3-6 timings - but can manage up to about 490 on same timings - result of a mushkin blueline rma - went from utt to mosel chips) an 2.8 is a very nice result anyway, still any advice?

[minirac]

Wow, 1.744v to get stable at 2.745Hz :eek:

Personally I would prefer a lower vcore on Venice than that...


yes i don't know why? mybe bios? i try with 8,5*330 and its stable at same voltage.

[Dave_Sz]

Did someone test a 3200+ E6 already?

Mine will be here friday. I'm planning to burn it in for a week or so and I'll definitely post some screenies. Don't get your hopes up, this is my first RIG build/OC.

[d4n13l]

Mine will be here friday. I'm planning to burn it in for a week or so and I'll definitely post some screenies. Don't get your hopes up, this is my first RIG build/OC.

Ok, I'm waiting...

[Jort]

0523 EPMW 0794

http://users.telenet.be/jortcollijn/A64_overclocking/venice/31.265.JPG

some testing my new cpu, its on water;)

1.6V but i'll work on it

[Dave_Sz]

Ok, I'm waiting...

Well, SVC and NEWEGG fudged up, mobo won't be here til monday, xp-90 on tuesday. The mobo, xp-90, and the venice were all bought within 30 minutes of eachother. Only the chip from ewiz will be ontime, friday, the mobo and HS were both rescheduled for no reason.

[Xyus89]

Hi,
My new cpu. E6 0528 GPFW (that's why revision is empty)

http://img373.imageshack.us/img373/7943/superpi27am.jpg

good cpu , I'm sure I can hit 2800 mhz with 1.8vcore, it loves the vcore a little to much :(

Xyus
plz give commments.

[Absolute_0]

Watch the volts Xyrus, thats very high for air, much higher than i run on water.

[Xyus89]

I know,

otherwise it isn't stable :(

xyus
but 1.8vcore for 30secondsd ain't gonna harm the cpu that much ;)

[5-Clicks]

updated: here's my 0520APMW sPI 32m stable:)

http://img342.imageshack.us/img342/6070/30002835ghz0520apmw32m9la.jpg (http://imageshack.us)

current settings:
http://img342.imageshack.us/img342/1088/currentsettings9vm.jpg (http://imageshack.us)

[x714n]

http://img391.imageshack.us/img391/655/2931wg.jpg (http://imageshack.us)
on stock cooling

[ic3m4n2005]

Hey guys i`ve got a quick question regarding my temps. I put 1,425x113% on my 3200+ @ 2780Mhz , mbm reads 1,55-1,57v it fluctuates :( . Temps on load are 40°-42° on cpu 60+° on pwmic and 42°-44° on chipset. So here comes the questions :) : Should i remove the heatspreader (i`m a little afraid of it cause i`ve never done it before) and second question what can i do do stop vcore flutuations ? I will put a fan near the pwmic to cool it better, 60+° seem a little high, but now tell me your answers ;)

Edit: forgot to mention mb is DFI Nf4 SLI-D

[Monge]

Here's my Venice 3000+ 0517DPMW at 2908MHz@1,5v bios, DFi NF4 Ultra-D and 2*512MB Twinmos Speed Premium PC3200 264MHz@3.4v 2-2-2-5-1T with stock cooler:

http://xtremesystems.org/forums/attachment.php?attachmentid=36437&stc=1

[[XC] 4X4N]

Hey guys i`ve got a quick question regarding my temps. I put 1,425x113% on my 3200+ @ 2780Mhz , mbm reads 1,55-1,57v it fluctuates :( . Temps on load are 40°-42° on cpu 60+° on pwmic and 42°-44° on chipset. So here comes the questions :) : Should i remove the heatspreader (i`m a little afraid of it cause i`ve never done it before) and second question what can i do do stop vcore flutuations ? I will put a fan near the pwmic to cool it better, 60+° seem a little high, but now tell me your answers ;)

Edit: forgot to mention mb is DFI Nf4 SLI-D

Your temps are good. If you remove the ihs, I doubt you'll get more than 2-3 degrees better. That's about all I got. The vcore fluctuating a little is normal. As far as pwm temp, mine never gets above 50 -52, but I've seen others with temps in the sixties. Putting a fan over it should bring the temp down. If you do decide to take the ihs off, some acetone will help soften the sealant, and make it easier to cut.

[Dave_Sz]

My E6 0530CPFW does 2.52@1.45, 280x9. Anything higher and it fails prime within a minute. No screens sorry, my mobo suffered a crash during a bios flash.

[thesaucier]

I have to work on my memory timings and get them a bit tighter but its doing OK so far at 10 X 290 t1 one to one. 3d stable.

[RobOC]

hy guys! ;)

I've not got idea of how to get an stable and decent overclock with my A8N-SLI premium mobo, my Venice 3500+ core and my pair of Dimms--> 2x1024 OCZ PC 4000: 3-4-4-8 (PSU Enermax 480W kill noise, tower Kandalf by thermaltake, VGA: ASUS EN7800 GTX)

Now I'm running my system at @2651 (2200 default) with this config in bios:

Multi: 11x (Default 11x)
Vcore:1.550 V
Clock: 241 MHZ
DDR CLOCK: 400 MHZ at 3(Tcl)- 4(Trcd)- 4(Trp)- 8(Tras)- 11(Trc)- 16(Trfc)-5 (Trwt)- 3(Twr) 1T------> I don't Know if the Trc,Trfc an the Trwt values are correct because the bios autoset it to 400 MHZ with 2T and i set then to 1 T. What do you think about this? Should i change it?
DDR Volt. 2.80
Chipset Volt: 1.6
HT volt: 1.5
HT multiplier: x4
amd cool n quiet : Off
--------------------------------------->all is stable with superpi and mentest at @2680 and prime fails, but with this configuration prime95 is stable during 5 hours more or less (memtest and superpi o.k.) then crash :banana: .

my results in sandra are :

CPU: between Athlon 53 FX and Atlhon 55 FX-->11100/5425
Memory band...:6750/6650

my temps with my zalman 7000-B CU are:

Idle:43º
Full: 55º
Chipset: 126º fanless

I'm very confused about how i must to do the correct overclock.
What do you think about this config?
At this moment is the most stable config. in performance/stability but I think that is a poor overclock. :(

On the other Hand, clockgen say to me that my system is stable over 2690 but then prime95 fails.

Please post all your opinions and sugestions over this config and others that you think that could be better than this one and what i must to do or not to do...

Please help!!!

Thanks in advance and sorry for my poor and terrible english...Rob :slapass:

[GoThr3k]

today i have received an 0531 BPMW
it does 2 ghz on stock voltage for now, but the psu is freaking out, i think thats the main problem, at 1.4V and 2.050 ghz it just freezed, raising up the voltage did nothing
at 2 ghz its stable but even at 2.025 its not
weird imho
just waiting for my new psu and i will give you some screens

[GoThr3k]

how do you see its an E6 ???

[ReelMonza]

Look IHS, it if ends in BW then it's an E6.

Through CPU-Z it should have stepping 2 (F F 2)

[Acrazar]

well im confused, my MB rates to above a 300HTT but i cant get it past 270 my mem is stable at 2.5-3-3-7 past 230 and the 3000+ is supposed to at least get 2.4, i cant get past 2.2, now the odd thing is that i cant max out everything at one time, BTW im relativly new to this OC thing, and at the settings below i have flashing on the screen, (it will flash black and than go back to normal. i can superpi it just fine so its stable, im confused. HELP!

http://www.xtremesystems.org/forums/attachment.php?attachmentid=36859&stc=1

[GoThr3k]

http://img148.imageshack.us/my.php?image=25ghzatstockvsuperpi32stable3l.jpg

not tested further because i have strange issues

stepping 0531 BPMW

[coop]

http://img148.imageshack.us/my.php?image=25ghzatstockvsuperpi32stable3l.jpg

not tested further because i have strange issues

stepping 0531 BPMW
Great post, Friday afternoon, after work. Could end up in someones sig. If you need any help plenty of people here.

[GoThr3k]

you mean, that someone could use my screen, tis a sucky screen i have some better right now
will use something on it, thx m8
it does 2.75 @ 1.5V stock cooling, NO airflow

[coop]

No, not really what I meant but that is ok. 2.75@1.5v is good, but your right.. try to get a better fan/hs.

[GoThr3k]

ah, you ment up that voltage and see what you got there
i know, normally i will put phase change on top of that middel october orso

[funkflix]

0520DPAW.. n1 Stepping! :toast:

http://img355.imageshack.us/img355/5694/268s5et.jpg

[Rezag1000]

DAMN 1.744 V, YOU GOT SOME BIG ASS BALLS!!!!!!!

AND CPU-Z UsuAlly TELLS YOU LESS THAN THE CORRECT VCORE ON DFI BOARDS......

BADASs

[Absolute_0]

1.744 isn't that extreme for watercooling. Now, 1.8 would be. Anyway, nice clocks Gravedigga, that's very impressive for normal watercooling!

[Hugo van Dijk]

DAMN 1.744 V, YOU GOT SOME BIG ASS BALLS!!!!!!!

:p: :eek: I,m using 1.86V at my MSI Neo2 (venice) at boxed air cooling.

[Dave_Sz]

^Ok I guess you're already looking for a new a64?



My E6 0530CPFW does 2.52@1.45, 280x9. Anything higher and it fails prime within a minute. No screens sorry, my mobo suffered a crash during a bios flash.

UPDATE

I also received a E6 3200 and this one is also stuck at 2500mhz. Both my e6 procs are stuck at ~2500.

[ReelMonza]

What's your mobo Dave_Sz ?

[Absolute_0]

:p: :eek: I,m using 1.86V at my MSI Neo2 (venice) at boxed air cooling.

Is that bragging or exclaiming that the Neo2 is undervolting? If the volts are that high, i would like you see you prime it all day...

:explode2:

[Dave_Sz]

What's your mobo Dave_Sz ?

9npa ultra. I also just did some testing on the DIMM slots. Slot 2 and 4 max out at ~280 while slots 1 and 3 max out at 303. What a :banana::banana::banana::banana::banana:, ey?

[Acrazar]

heres my newest, man these vennnys fly on stock voltage well a little above on this one... just a lil so i could pi it :toast: , just wish i had some faster mem... oh the perils of a college students wallet

http://www.xtremesystems.org/forums/attachment.php?attachmentid=37050&stc=1

[Perc]

yeah man i got simular results with my 3200 venice. heres a shot of 2800mhz 1:1 1.4v and climbing...

peace perc,

[JfRsQ]

-22C? not really similar :p:
Great CPUs anyway

Mine was going about 2850Mhz @~1.4V on boxed heatsink, not 1:1 tho. After this, it needs about +.25V to get to 3Ghz. Raising voltage past this point is just calling for instability, even if the temp are fine; <40C :confused:

[Perc]

-22C? not really similar :p:
Great CPUs anyway

Mine was going about 2850Mhz @~1.4V on boxed heatsink, not 1:1 tho. After this, it needs about +.25V to get to 3Ghz. Raising voltage past this point is just calling for instability, even if the temp are fine; <40C :confused:


LOL its a stock mach1 i think mb5 is off just a few degrees! i always chuckle when i see that -22 on my desktop :D cause i know that unit isnt getting -22c at the core.

so your saying that with that venice you cant give it more then 1.425v or am i missreading? i would think that these venices would handle 1.55v-1.65v depending on you cooling no? plus 3gigs at 1.425v thats a nice chip! id like to see your chip on phasechange i bet it would fly. im aiming for 3200mhz out of this 0521DPMW veince i have. but knowing my luck ill be in the same 2800-3000mhz range i cant seem to bust out of? think i need colder unit that would help! ok man good luck...

peace perc,

[JfRsQ]

No,
1.40V
+0.25V
______
1.65V

No matter what voltage higher after this, it's windows instant freeze, or BSOD :stick: