View Full Version : Post your Prometeia temps.
will_perdikakis
12-02-2002, 08:52 AM
What temps are you guys getting with your Prometeia? Please list your CPU/voltages, etc.
sharpbw
12-02-2002, 04:22 PM
Running a 2600+ at 2500 Mhz (166x15) with 1.85v, I'm seeing around -34C on the Prometeia, and load temps of around -15C on the internal diode. Unloaded it will drop to -20C.
I'm using a KD7, and had to intstall the latest MBM to get the diode reading. My bios reading always read the internal temp as 0C.
Hardass
12-02-2002, 04:44 PM
Originally posted by sharpbw
Running a 2600+ at 2500 Mhz (166x15) with 1.85v, I'm seeing around -34C on the Prometeia, and load temps of around -15C on the internal diode. Unloaded it will drop to -20C.
I'm using a KD7, and had to intstall the latest MBM to get the diode reading. My bios reading always read the internal temp as 0C.
Oc sure beats the 21c reading I get with this epox 8K5A+ mobo. Evap temp is -30c.
Pedro Rocha
12-02-2002, 06:39 PM
Abit IT7 Max-2
CPU Voltage 1.725v
P4 2800@3700
Using internal diode sensor
Idle less than -24º C (the minimal temperature on the motherboard sensor)
Full load never passed -12º C even a 3.700Mhz.
:toast:
will_perdikakis
12-02-2002, 07:07 PM
My full load temps are -8.5 C after Prime95 for 10 hours with my 2.53b @ 3300 1.62v.
CodeRed
12-05-2002, 04:59 PM
Originally posted by Hardass
Oc sure beats the 21c reading I get with this epox 8K5A+ mobo. Evap temp is -30c.
Hardass,
I get the same prob with the 8K5A2 and XP2400+ at 12 deg C :(. The stupid mobo is reading the in-socket thermister not the on-chip diode. This is probably the only way the get the thermister temp higher than the diode temp :)
I would like to estimate my core temp so if anyone has both readings could they please post them. I know this wont be the most accurate way of getting the chip temp but its gotta be better than nothing.
Cheers
CodeRed
mike.elmes
12-16-2002, 04:01 PM
CodeRed, I was watching a documenary last night on tv and there was a guy there at a fragapulusa gaming type lan party with that handle.... was that you??
Hardass
12-16-2002, 04:55 PM
2400+
JNav89GT
12-17-2002, 01:56 PM
what cpu is that hardass?
Hardass
12-17-2002, 02:03 PM
2400+
CodeRed
12-17-2002, 05:39 PM
Originally posted by mike.elmes
CodeRed, I was watching a documenary last night on tv and there was a guy there at a fragapulusa gaming type lan party with that handle.... was that you??
No not me. Must be another CodeRed out there
TheDude
12-17-2002, 06:19 PM
KD7 with xp2700
166x15
cpu 1.9v
vmem 2.85
-30 on Prom led
18c and -2c in MBM
P4 2.66 @ 20x160=3200 Mhz SL6EH 10/30/2002 Malay
needs 1.85 VCore (maximum, lousy chip)
Epox 4PEA+
System: 41/43 idle/stress
CPU: -25/-8 idle/stress
Prometeia(displayLED): -33/-29 idle/stress
Need a VMod for the mobo, my lousy P4 is VCore hungry.
CCtaylor
12-20-2002, 10:45 AM
Asus p4pe
cpu voltage @1.85
P4 3.06@3.90
idle -22c Load 4c
CCtaylor
12-20-2002, 07:32 PM
Does 15c sound right after running UT2K3 fOR ABOUT 2 HOuRS??
This ia 3.06@3.90 1.85volts.............CC