View Full Version : dfi ultra d problems
pancake
03-11-2005, 01:23 PM
having a few probs with this board. works fine with the mem set to the 200 1:1 setting , but if i set a divider it it comes up with a cmos error and i have to clear cmos to get it booting. using 4 256 mb bh5
Try updating your BIOS. First board revisions worked great only with TCCD memory chips as far as I know. What if you set above 200 1:1?
$0m#0n#
03-11-2005, 03:38 PM
I am almost sure it's the CPU, it should b ok with T2 :(
pancake
03-11-2005, 04:32 PM
ive tried the latest 3/10 bios and the beta 3/10p bios does the same. i can get 225 @ 2-2-3-6 game and prime stable had it at 240 earlier but dosent want to do it anymore ( 2.5-3-3-7) memtest runs my ram stable for hours @ 2-2-3-6 240fsb fine but wont boot pc at that either bsods or hangs/reboots. whats best ram for this kind of chip and board?
The Byter
03-11-2005, 04:35 PM
having a few probs with this board. works fine with the mem set to the 200 1:1 setting , but if i set a divider it it comes up with a cmos error and i have to clear cmos to get it booting. using 4 256 mb bh5
4 256 ??
try only 2 and use dimm 2 and 4.
pancake
03-12-2005, 07:17 AM
got fed up with the chip i had as it was a cbbid so went off searching round the local pc shops and found this one.
ADA3200DIK4BI
CBBHD O446SPDW
1158997L40466
that a good chip?
pancake
03-12-2005, 09:21 AM
ok looking good so far currently priming at 260htt 10xmulti 2600mhz (3200 winnie) still got htt multi at x4 so its running @ 1040 , should i lower my htt multi or is it ok to run it over 1000? now using my crap generic ddr400 as my bh5 seemed to be the problem no matter what i ran it at ( it hated using a divder bsod all the time) memory is currently running at 186fsb 2.5-3-3-6 keeping it low to see how cpu will do , one thing though in nvidia monitor it reports my memory speed as 520 and its in the red? whats that about? whats some good memory to replace my bh5 somethning thats gonna do around 260fsb by the look of it with tight timings
pancake
03-12-2005, 03:23 PM
now got it to 270 2-2-2-5 stable 3.5 vdimm new (http://service.futuremark.com/compare?2k1=8476494) 3d mark score. cant get the other 2 stable in with this 2 though so looks like im gonna have to shop them in for a gig of something
NeoGeo333
03-12-2005, 07:10 PM
same thing happen to me when i tried to oc my POS CBBID 0501 it wouldnt go over 2.1ghz stable and is holding back my Gskill 512x2 LE. Gotta wait for new Rev.E. So if anyone has problem with trying to oc and its an CBBID you got maybe its time for a new cpu. Anyone know how to screw up an Winnie to RMA back to AMD?
xavicl
03-13-2005, 01:55 AM
my dfi doesnt hates tccd, I do 305x9 with air :D
Evil_Spork
03-13-2005, 02:49 AM
I am almost sure it's the CPU, it should b ok with T2 :(
def.
the current mem controller cant handle 4 sticks at 1T well at all. it does ok at 2T though.. it should run at least 200mhz. but much more and it gets very stressed. :(