PDA

View Full Version : SPI NO PATCH How I can get 24' ?


giorgioprimo
03-06-2005, 07:54 AM
my best resoul is this: http://img138.exs.cx/img138/1813/25spi6ml.jpg .

I used Vapochill LS, DFI ultra D 2x256 mushkin level 2.

I tested also 1G VX and 1G Gskill LE but no way.


I twaked the SO the register and the memory allocation, but no way. If I use more volt on the cpu It became instable and do not finish the spi.

Any suggestion?
$0m#0n#
03-06-2005, 08:00 AM
Try the VX memory & try 276*12, I think it could b possible with some volts on the mem, u should cool the mem really good & try tighting the timings more like CL 1.5 & so.

Use this Super Pi, u can c time in mili sec & it has anticheat.
giorgioprimo
03-06-2005, 08:15 AM
my vx doesn't pass 260 at 3,4 volt. No avdavantage also with 3,7 volt..
[XC] moddolicous
03-06-2005, 08:33 AM
Use the cheat free super pi. It shows your time in milliseconds. You could try running memtest overnight at that speed to burn them in, which might let you go a little higher.
giorgioprimo
03-06-2005, 08:35 AM
I'll try it
$0m#0n#
03-06-2005, 08:45 AM
my vx doesn't pass 260 at 3,4 volt. No avdavantage also with 3,7 volt..It doesnt really matter if they pass memtest but the thing that matters is if they can make a short M1 run, just for 30s so...
Gautam
03-06-2005, 03:51 PM
Switch to Win2k or Win2k3 server. Each are about a full second quicker than XP.
VoRtAn_MaDgE
03-08-2005, 06:22 PM
giorgioprimo

I have a very similar setup (FX55+mach2@r404a) and i'm trying 24sg ...

I have a 2x512 tccd kit and a 2x256 bh-5, i'm still only testing with my tccd kit...

Here the screens without and with anti-cheat superpi mod

http://img58.exs.cx/img58/1747/25sg9jr.jpg

http://img28.exs.cx/img28/6318/superpianticheat1ud.jpg

Both runs are with same settings didn't start playing with a64tweaker yet...

Can run at 3350mhz i guess 3400 will be very difficult i guess but i will try it...guess if we could bench at 3400 would be easy...

Your runs with bh-5 didn't help ?
cpulloverclock
03-09-2005, 01:21 AM
there is a problem

I get 26s (26.937s) at 3046.9MHz with my winnie and I think to have 25s (about )25.950s at 3140-3150MHz with the best optimizations and unpatched
with a FX I'd see 25s at 3110-3115MHz for me
at 3300MHz not far for 23s unpatched (23.9XXs)

at 3730MHz 20s is entirely possible, I'm sure :cool:
Pejsen
03-09-2005, 04:42 AM
there is a problem

I get 26s (26.937s) at 3046.9MHz with my winnie and I think to have 25s (about )25.950s at 3140-3150MHz with the best optimizations and unpatched
with a FX I'd see 25s at 3110-3115MHz for me
at 3300MHz not far for 23s unpatched (23.9XXs)

at 3730MHz 20s is entirely possible, I'm sure :cool:


I think you should help the BIG guys. Tom H ran it @ exactly 3730 and got 22s closer to 23s than to 21s.
VoRtAn_MaDgE
03-09-2005, 04:52 AM
there is a problem

I get 26s (26.937s) at 3046.9MHz with my winnie and I think to have 25s (about )25.950s at 3140-3150MHz with the best optimizations and unpatched
with a FX I'd see 25s at 3110-3115MHz for me
at 3300MHz not far for 23s unpatched (23.9XXs)

at 3730MHz 20s is entirely possible, I'm sure :cool:

Nice times for those speed indeed cpulloverclock... u pass lot of time tweaking it seems (O.S and a64?) ;)

Wich O.S did u use ?

:)
HARDCORECLOCKER
03-09-2005, 05:06 AM
:D HAHA - You need at least 3,4 GHz stable for SuperPI 1M and a very high HTT 1:1 with TCCD or very good timings with BH-5 1:1.

I tried all I can but found also no way for 24sec - here's my best I ever got, done with the CORSAIR BH-5:

http://img149.exs.cx/img149/5808/252652xp.jpg

:toast:
bias_hjorth
03-09-2005, 05:17 AM
I think you should help the BIG guys. Tom H ran it @ exactly 3730 and got 22s closer to 23s than to 21s.


Not to sound patrionising but I dont think it gets any bigger when it comes to tweaking with cpuoverclock. If cpuoverclock had a cascade I bet within a few days he would be ranking along with the 2 / 3 japs..

Looks at his sig.. Some of the most impressive overclocks i´ve ever seen.
VoRtAn_MaDgE
03-09-2005, 05:45 AM
I will give it a try later with my bh-5 to see the difference, they do the speed i need with no problem ;)...

HARDCORECLOCKER you are too close of 24, got to squeeze that system a little bit, just a little bit more :bsod:

btw i already asked this before in other thread...anyone got issues with dfi nforce4 ultra passing the 3,8 in vdimm or know what make's the system won't boot to windows with that voltage?

I already saw ppl booting at the max of the board but i can't...
Last time my bh-5 did 3,8v 290 2-2-2-5 but didn't test the stability of them, it would be nice but guess that's hard to stabilize at that fsb/1:1 without relaxing them...
HARDCORECLOCKER
03-09-2005, 06:09 AM
I will give it a try later with my bh-5 to see the difference, they do the speed i need with no problem ;)...

HARDCORECLOCKER you are too close of 24, got to squeeze that system a little bit, just a little bit more :bsod:

btw i already asked this before in other thread...anyone got issues with dfi nforce4 ultra passing the 3,8 in vdimm or know what make's the system won't boot to windows with that voltage?

I already saw ppl booting at the max of the board but i can't...
Last time my bh-5 did 3,8v 290 2-2-2-5 but didn't test the stability of them, it would be nice but guess that's hard to stabilize at that fsb/1:1 without relaxing them...

;) Yes I know, but unfortunately it's maxxed out - maybe on DFI NF4 in some future I'll get it.
It's a pity, I also got this here for benching and I'm sure this is 24sec SuperPi but not stable for SuperPi 1 M, get some errors:

http://img13.exs.cx/img13/1893/90008ry.jpg

:toast:
cpulloverclock
03-09-2005, 08:40 AM
I think you should help the BIG guys. Tom H ran it @ exactly 3730 and got 22s closer to 23s than to 21s.
I'd like to help him

no problem, but where is he? I dont see him
cpulloverclock
03-09-2005, 08:44 AM
Nice times for those speed indeed cpulloverclock... u pass lot of time tweaking it seems (O.S and a64?) ;)

Wich O.S did u use ?

:)
I'm always using Win2k3 standard since a moment
cpulloverclock
03-09-2005, 08:50 AM
Not to sound patrionising but I dont think it gets any bigger when it comes to tweaking with cpuoverclock. If cpuoverclock had a cascade I bet within a few days he would be ranking along with the 2 / 3 japs..

Looks at his sig.. Some of the most impressive overclocks i´ve ever seen.
japs, americans and Europeans

I have american and european family
Malachia
03-09-2005, 12:28 PM
you need only some more cold...
giorgioprimo
03-09-2005, 01:22 PM
I get 26s (26.937s) at 3046.9MHz with my winnie and I think to have 25s (about )25.950s at 3140-3150MHz with the best optimizations and unpatched

let me know how to obtain 24 at that speed..... should be really nice.

Maybe using W2003?
Malachia
03-09-2005, 01:32 PM
win 2k3 enterprise edition with around 35mb memory and hight cloked bh-5 or vx...
HARDCORECLOCKER
03-09-2005, 01:32 PM
you need only some more cold...

:D Oh Malachia - I love that post, it's as if You'd say within a club of drinkers "You only need one more beer....." :p:

Everybody here needs more cold !!! :toast:
cpulloverclock
03-09-2005, 03:40 PM
let me know how to obtain 24 at that speed..... should be really nice.

Maybe using W2003?
about 3250MHz with a 3000+ and 3200-3210 with a FX
VoRtAn_MaDgE
03-09-2005, 04:49 PM
IS there a big difference betweaen 2k3 and Win xp for SuperPi ?
cpulloverclock
03-10-2005, 12:30 AM
IS there a big difference betweaen 2k3 and Win xp for SuperPi ?
30-40MHz with the same tweaks
Zeus
03-10-2005, 12:24 PM
HARDCORECLOCKER,
Can you run 280x12 with your BH5 at 1,5-2-2-4?

I think that will net you 24sec. ;)
HARDCORECLOCKER
03-10-2005, 02:08 PM
HARDCORECLOCKER,
Can you run 280x12 with your BH5 at 1,5-2-2-4?

I think that will net you 24sec. ;)

:( No go, tried 3 different kits of BH-5 (MUSHKIN, CORSAIR 3200, CORSAIR 3500) and all maxed out at exactly 275.

So I think it's limited by the NEO2 and I have high hopes on the DFI NF4.

:toast: