View Full Version : O/C specs here...
Kurupt
12-01-2001, 12:24 AM
Post your overclock here
Mine is 1.4 @1.86ghz
JBELL
12-01-2001, 12:43 AM
I am running 1G @ 1.187G - had her as high as 1.3G
200FSB @ 226
Just added a CAK38 to replace my volcano 6cu - dropped my temps 14F!! - NO JOKE!
running 100F flat full load!
Dissolved
12-01-2001, 02:15 AM
Originally posted by JBell
I am running 1G @ 1.187G - had her as high as 1.3G
200FSB @ 226
Just added a CAK38 to replace my volcano 6cu - dropped my temps 14F!! - NO JOKE!
running 100F flat full load!
very nice... im glad you liked my hsf ;)
oc stated in sig below ;)
Dissolved
12-01-2001, 02:47 AM
Originally posted by JBell
I am running 1G @ 1.187G - had her as high as 1.3G
200FSB @ 226
Just added a CAK38 to replace my volcano 6cu - dropped my temps 14F!! - NO JOKE!
running 100F flat full load!
yea those are nice temps, i had my 1.2ghz 200fsb i used that sink, and i got around 110~125 idle/load temps..
JBELL
12-01-2001, 07:40 AM
Originally posted by Dissolved
very nice... im glad you liked my hsf ;)
oc stated in sig below ;)
Yeah thanks for the sale!
I might hit ya up for the other stuff from your rig - if my bonuses are what they should be...
minoukat
12-01-2001, 02:07 PM
my crappy non-overclocking K6-2 hit as a big max (I didn't want to push the voltage too much !) 533MHz at 2.9v Wasn't stable though ...
R0BB23
12-01-2001, 07:54 PM
to date i havent overclocked anything worth wild just older machines where the 1 or 2 hz i got out of it wasnt even worth it, that was a joke;) :D
but as soon as i get my new one oced you will be the first to know, thats right you guys not those freaks at oc.com;) :D
hehehehe that was joke also.;) :D
Originally posted by R0BB23
but as soon as i get my new one oced you will be the first to know
When do you expect to get it all complete? Or is it now!
R0BB23
12-01-2001, 08:29 PM
got build it first,;)
alot of the parts are going to be christmas presents:D
DaGooch
12-05-2001, 10:07 PM
AXIA Y 1200 @ 1466 on Asus A7V133
AXIA Y 1200 @ 1533 on Shuttle AK31v20
AYHJA Y 1333 @ 1533 on Shuttle AK31v31
Kurupt gimme yo KryoTech! :p
JBELL
12-05-2001, 10:11 PM
Originally posted by DaGoochMeister
AXIA Y 1200 @ 1466 on Asus A7V133
AXIA Y 1200 @ 1533 on Shuttle AK31v20
AYHJA Y 1333 @ 1533 on Shuttle AK31v31
Kurupt gimme yo KryoTech! :p
whats your multiplier and bus speed?
DaGooch
12-05-2001, 10:43 PM
All of them are at 266FSB and a multiplier of 11 or 11.5. I have a 4 disk raid 0 array on my main system and I can not afford to use a non-standard fsb speed due to the pci bus not being 33mhz and possibly causing data corruption.
Originally posted by DaGoochMeister
AXIA Y 1200 @ 1466 on Asus A7V133
AXIA Y 1200 @ 1533 on Shuttle AK31v20
AYHJA Y 1333 @ 1533 on Shuttle AK31v31
Kurupt gimme yo KryoTech! :p
Sounds sweet! Gotta love those AXIA!:)
00_Punk
12-16-2001, 12:21 PM
1333MHz @ 1488 MHz right now. i had it @ 1508MHZ before, but it wasn't very stable. I need a better hsf or water cooling to bring temps down so i can OC it more.
DaGooch
12-18-2001, 02:00 PM
00_Punk:
You should easily be able to do 1533 and possibly 1600. What heatsink are you using presently? An Alpha PAL-8045 should fit your motherboard. Not too expensive considering it is a copper and aluminum hybrid with a 80mm fan.
http://www.alphanovatech.com/mb_inf_pal8045e.html
00_Punk
12-18-2001, 02:37 PM
Originally posted by DaGoochMeister
00_Punk:
You should easily be able to do 1533 and possibly 1600. What heatsink are you using presently? An Alpha PAL-8045 should fit your motherboard. Not too expensive considering it is a copper and aluminum hybrid with a 80mm fan.
http://www.alphanovatech.com/mb_inf_pal8045e.html
currently, im only using the stock hsf that came with my Athlon boxed CPU w/ Arctic Silver. I'm waiting for my waterblock to come in so i can switch it out, then i will O/C it more, so i don't want to buy a new hsf right now, because i wouldn't be using it for very long.
Just brought mine up a tad! Because of the cooler temps outside! I going to try more tonight!
Smizack
01-17-2002, 10:07 PM
Originally posted by JAWS
Just brought mine up a tad! Because of the cooler temps outside! I going to try more tonight!
You leave your computer outside??:p
I'm with 00_Punk, I'm still waiting to install a watercooler.
JBELL
01-17-2002, 10:24 PM
Originally posted by DaGoochMeister
00_Punk:
You should easily be able to do 1533 and possibly 1600. What heatsink are you using presently? An Alpha PAL-8045 should fit your motherboard. Not too expensive considering it is a copper and aluminum hybrid with a 80mm fan.
http://www.alphanovatech.com/mb_inf_pal8045e.html
my mobo is stopping me from higher than 1500@300 or 1540@280 ....
R0BB23
01-31-2002, 10:41 PM
amd tbird axia y stepping
1.2@1.352 :)
107f(42c)
Originally posted by R0BB23
amd tbird axia y stepping
1.2@1.352 :)
107f(42c)
Right on! I have the same chip! :)
JBELL
01-31-2002, 11:31 PM
Originally posted by R0BB23
amd tbird axia y stepping
1.2@1.352 :)
107f(42c)
yers temps are a bit high for that speed...
what heat sink do you have?
I run 1.5G at 100F/40C under full load
Originally posted by JBell
yers temps are a bit high for that speed...
what heat sink do you have?
I run 1.5G at 100F/40C under full load
What's your cpu's original speed?
JBELL
01-31-2002, 11:55 PM
Originally posted by JAWS
What's your cpu's original speed?
AYHJA 1.333 266FSB
it is now at 1.5 300FSB
Originally posted by JBell
AYHJA 1.333 266FSB
it is now at 1.5 300FSB
Great O/C! That's without a volt mod, right?
JBELL
02-01-2002, 12:00 AM
Originally posted by JAWS
Great O/C! That's without a volt mod, right?
no volt mod ... at 1.85VCORE
Originally posted by JBell
no volt mod ... at 1.85VCORE
Is that pc133 or ddr? 150 FSB that is awesome! I bet you could get to 1.6 w/ a V.M.
JBELL
02-01-2002, 12:04 AM
Originally posted by JAWS
Is that pc133 or ddr? 150 FSB that is awesome!
512MB Micron MT PC150 ram
it is running stock...... no DDR for me I am on a EPOX kta3+ mobo
Originally posted by JBell
512MB Micron MT PC150 ram
it is running stock...... no DDR for me I am on a EPOX kta3+ mobo
Thats cool! I didn't know Micron made pc150. Learn something new everyday! :) Gotta love that 300 FSB!
JBELL
02-01-2002, 12:09 AM
the 300FSB ROCKS!!!! my systems is sooo much faster since I went to the new chip from 200fsb to 266fsb the overclocker is that much better...
For overall system performance, gotta go with the higher FSB settings.
How do your components handle it? I have never figured out how people get their FSB to run over 150+ My LAN card won't work above 142. :(
JBELL
02-01-2002, 12:19 AM
Originally posted by JAWS
For overall system performance, gotta go with the higher FSB settings.
How do your components handle it? I have never figured out how people get their FSB to run over 150+ My LAN card won't work above 142. :(
it is ALL about what brands you use
I have as such:
Hard drives - 1-Quantum Fireball 40Gig on IDE 1
2-Seagate Barracuda IV 40Gig on Raid0 each drive on separate channel for maximum bandwidth
CD-roms - 1 SONY DD-RW 12x8x32 on IDE 2
1 generic Slave at 32X on IDE 2
Zip drive - 1 on IDE 1
NIC - LinkSYS 10/100
Sound - Creative LIVE! 5.1 Platinum w/ Live! drive system
Video - Visiontek 64mb DDR GEForce2 GTS
R0BB23
02-01-2002, 07:59 AM
Originally posted by JAWS
Right on! I have the same chip! :)
its my case temps there killing me.
i need to get some more fans!
and some as3
Smizack
02-01-2002, 08:43 AM
Originally posted by R0BB23
its my case temps there killing me.
i need to get some more fans!
and some as3
Time to stick a water cooler on it huh?
R0BB23
02-01-2002, 08:55 AM
nah, im going to do some moding get me a good airflow
some as3
a shimmy(sp?)
and tell the gods of weather to stop this 70+f weather
for god sakes its FEB 1ST
R0BB23
02-01-2002, 04:45 PM
k.
i did some messing around and go my cpu temp down to
40c @ 1362 :)
I got it running at 1570, with room to work! I don't know if I want to push it more! FSB 143.
R0BB23
02-06-2002, 08:58 PM
oh yah, update!!!!
1446 9.5*152
35c load!
and god said there shall be arctic silver 3 :D:D:D:D:D
Originally posted by R0BB23
oh yah, update!!!!
1446 9.5*152
35c load!
and god said there shall be arctic silver 3 :D:D:D:D:D
Nice O/C! I haven't tried AS3 yet. :(
Smizack
02-07-2002, 06:41 AM
Originally posted by R0BB23
and god said there shall be arctic silver 3 :D:D:D:D:D
Heh. Right on!
Originally posted by JAWS
I got it running at 1570, with room to work! I don't know if I want to push it more! FSB 143.
Got the fsb up to 149 with the Crucial. :) Maybe 1600 air-cooled is on the horizon!
R0BB23
02-08-2002, 10:18 PM
well im stuck at 1.446 unstable higher.
dont know why,
its not heat obviously
any suggestions
JBELL
02-08-2002, 10:21 PM
Originally posted by R0BB23
well im stuck at 1.446 unstable higher.
dont know why,
its not heat obviously
any suggestions
sounds like the limits of the chip... I am stuck at 1500@ 300 or 1540@ 280fsb
I can NOT do any better.
R0BB23
02-08-2002, 10:23 PM
nah i know it can go higher,
bought it off another ocer who pushed it to 1.5
JBELL
02-08-2002, 10:31 PM
Originally posted by R0BB23
nah i know it can go higher,
bought it off another ocer who pushed it to 1.5
did that person have the same mobo and voltage settings as you?
that plays a factor
R0BB23
02-08-2002, 10:33 PM
voltage im not sure, ive played around with the settings nothing helps.
my voltage is maxed out so............
JBELL
02-08-2002, 10:34 PM
Originally posted by R0BB23
voltage im not sure, ive played around with the settings nothing helps.
my voltage is maxed out so............
your running 1.85 on VCORE?
what about VIO and VAGP?
R0BB23
02-08-2002, 10:36 PM
yes well it runs at more like 1.89, but set at 1.85
not sure about those other 2
JBELL
02-08-2002, 10:39 PM
Originally posted by R0BB23
yes well it runs at more like 1.89, but set at 1.85
not sure about those other 2
well they never run true... but bump up the other voltages by at least .5
it should help get more power to your other components
speaking of that how big is your PSU?
Originally posted by R0BB23
yes well it runs at more like 1.89, but set at 1.85
not sure about those other 2
Damn, I have my vcore set at 2.20!
R0BB23
02-08-2002, 10:41 PM
300w:(
but luckily, i run my burner on my other computer, and hardly have anything in it, i have more fans then cards in pci slots.:D
JBELL
02-08-2002, 10:49 PM
Originally posted by JAWS
Damn, I have my vcore set at 2.20!
*mousecord slap*
shaadduup!
Originally posted by JBell
*mousecord slap*
shaadduup!
I do! The funny thing is, it's all on a Antec 300w p/s!
Highest I've ever had my chip!
JBELL
02-08-2002, 11:17 PM
Originally posted by JAWS
Highest I've ever had my chip!
please do not double post the same pic in different threads!
Originally posted by JBell
please do not double post the same pic in different threads!
one was Memory/FSB related and the other was AMD! :confused:
JBELL
02-09-2002, 06:32 AM
Originally posted by JAWS
one was Memory/FSB related and the other was AMD! :confused:
LOL yeah but it was the same pic!!!
its all good bud
Smizack
02-09-2002, 07:19 PM
Originally posted by JBell
*mousecord slap*
shaadduup!
hehe.. I thought I'd be the first to be taken out by a mouse cord!!!
Smizack
02-09-2002, 07:20 PM
Originally posted by R0BB23
300w:(
but luckily, i run my burner on my other computer, and hardly have anything in it, i have more fans then cards in pci slots.:D
I'd definately start looking for another psu. Or run duals. works for me.
phantazm03
02-25-2002, 07:38 PM
i've had my XP1600+ up to 1630 (155x10.5) but now i've backed it down to stock again, since the fan on the Volcano7 was driving me nuts at 5000rpm. this keeps it around 4000, which is better. once i get my water cooling in i'll be unlocking the XP and seeing how much better i can do. hoping to hit 1666 (266 increase, same speed as a 2000+ but i'll have a higher bus that a stock 2000+ :))
troy.
Originally posted by phantazm03
i've had my XP1600+ up to 1630 (155x10.5) but now i've backed it down to stock again, since the fan on the Volcano7 was driving me nuts at 5000rpm. this keeps it around 4000, which is better. once i get my water cooling in i'll be unlocking the XP and seeing how much better i can do. hoping to hit 1666 (266 increase, same speed as a 2000+ but i'll have a higher bus that a stock 2000+ :))
troy.
Welcome to the forums!
1630 is a sweet overclock for a 1600+. I know what you mean about the fan, I have a delta! :D When ya get that w/c setup, you should be good to go. (I'm betting around 1700+)
JBELL
02-25-2002, 08:33 PM
Originally posted by phantazm03
i've had my XP1600+ up to 1630 (155x10.5) but now i've backed it down to stock again, since the fan on the Volcano7 was driving me nuts at 5000rpm. this keeps it around 4000, which is better. once i get my water cooling in i'll be unlocking the XP and seeing how much better i can do. hoping to hit 1666 (266 increase, same speed as a 2000+ but i'll have a higher bus that a stock 2000+ :))
troy.
Welcome to the forums...
very impressive overclock - and how does the volcano 7 bother you?
LOL you would HATE my case ... 5 80mm fans and a 120mm blowhole - and I am not done yet ... loud enuf??
phantazm03
02-25-2002, 09:22 PM
its just a really loud humming, makes it hard to sleep as the computer is in my bedroom and i have the case side off. And i think it has given me headaches. next year i'm going to University, so i can't have a super loud PC running all the time with a room mate anyway. and i want cooler temps for the OC. so in goes the WC setup, with a 120mm intake sucking through the rad, and a pair of 92mm exhausts up top, all Rheo controlled i think.
troy.
Originally posted by phantazm03
i have the case side off.
LOL! I know how that is! I ran about 7 months without the sides. (made a good bookshelf though) :p
Starfox
03-18-2002, 11:22 PM
AMD XP 1600 @ 1900
1.4ghz @ 1.59 ghz 151x10.5
JBELL
03-18-2002, 11:25 PM
Originally posted by Starfox
AMD XP 1600 @ 1900
1.4ghz @ 1.59 ghz 151x10.5
impressive and DAMMIT another shuttle mobo user!!! LMAO
Originally posted by Starfox
AMD XP 1600 @ 1900
1.4ghz @ 1.59 ghz 151x10.5
What a sweet XP o/c! :) Nice going
phiber
04-04-2002, 08:05 PM
AMD XP 1800+ @ 1730 150FSB default voltage...really havent pushed it...
Originally posted by phiber
AMD XP 1800+ @ 1730 150FSB default voltage...really havent pushed it...
I was thinking about your overclock the other day. You got one hell of a chip on your hands! I got mine to 143 with default, but that was it.
DaGooch
05-07-2002, 05:23 AM
I passed Kurupt! :p
Hardass
05-07-2002, 05:43 AM
Is that 2000xp unlocked?
DaGooch
05-07-2002, 06:06 AM
Yes :D
Hardass
05-07-2002, 06:19 AM
Originally posted by DaGoochMeister
Yes :D
Did you unlock it yourself.
Originally posted by DaGoochMeister
I passed Kurupt! :p
Very nice! Did you connect the L5 bridges or were they already connected. I only ask because I see MP.
DaGooch
05-07-2002, 07:33 AM
I only had the L1 Bridges connected. Very strange. Never noticed until you mentioned it. I know about the L5 through this article and will check the CPU when it goes into it's new case. MP conversion is here for the rest that do know what hardass if talking about. http://www.hardwarezone.com/articles/articles.hwz?cid=2&aid=393&page=2
Wheeee, first post :D
See the sig below. 28c ambient, 42c full load.
Yes, it probably can do more...but I'm trying for a stable 3dmark bench right now.
Mook
JBELL
06-11-2002, 11:06 PM
WELCOME TO THE SICKNESS
Dramen
06-12-2002, 07:35 AM
Originally posted by JBELL
WELCOME TO THE SICKNESS
lol :D
mine:
Iwill xp333 TBc 1.2 @1440
AndrOvr
06-12-2002, 07:58 AM
Thunderbird 1.4@1.7 vcore 2v AIR cooled :D
Amd Man
06-12-2002, 11:27 PM
Enough said:)
OPPAINTER
06-13-2002, 08:40 AM
AMD Man,
Nice Clock,
Welcome to Xtreme:)
OPP
MrIcee
06-17-2002, 04:25 PM
Heres some retail XP1700+ goodness for ya guys:)
Randi :D
Silver
06-17-2002, 04:36 PM
xp1600 @ 1.83Ghz
freeloader
06-21-2002, 05:03 PM
1.0 Ghz AXIA #9 @ 1.68 Ghz
1600+ XP @ 1.75 Ghz.
Micutzu
06-25-2002, 12:44 PM
Athlon 900 (AQGA) @ 1060
Duron 1000 (AHLCA) @ 1320 , max post @ 1420 .
NorthernYankee
06-25-2002, 12:58 PM
This is with Water and 226w Pelt.
--NY
BigDov
06-25-2002, 02:35 PM
XP1600+ (AGOIA 9) currently at 1750. Gone as high as 1820 with problems.......
aircooled I might add.
Creative
06-25-2002, 11:46 PM
1600+ AGOIA Y week 4 @ 1866 water cooled.
DOnt know why she wont go higher....Ive booted into windows and have a screenie for 1907 but it crashed 10 minutes later :(
http://users.bigpond.net.au/creat/Review/1907.jpg
Im still happy though :)
Oh and first post...:banana:.....I came over fro icrontic and are a regular at Overclockers Australia....some of you here might know me :)
The Coolest
06-26-2002, 12:53 PM
lol, nice OCs guys.. I only have a lil OC on my AXIA 60MHz, for now and a 190MHz on the duron, waiting for Delta fan for AX-7 and a waterblock
Best I've had an XP AGOIA @ 1995. Air cooled with a Swiftech MC462 +Delta EHE. On an EPOX 8KHA+
This was only good for screenies though. You know SANDRA, WCPUID etc. Benchmarks would bomb at this level though.
A stable speed I'd say is between 1870 - 1900 with that chip of course this is temp dependant, that is why the variation is there.
I'm certain I could do screenies with that chip again at over 2 Gig if I really tried.
Been thinking about water cooling lately as well. Maybe get better and higher stable clock.:rolleyes:
Currently it's the one in my sig, but before this I had a Tbird 1GHz AVIA Y, and it went all the way up to 1560 stable, aircooled @ 1.99V. and the best thing was that I only payed like 50$ for it :)
X Men SS
07-01-2002, 09:38 AM
Athlon XP1600+ @ 1.88GHz (10.5x179)
Highest - 1940MHz (184.79x10.5) :) ...
deerhunter
07-02-2002, 06:44 AM
ok so I have to go down to 2050 for stability,
someday I'll get some of the frigid water cooling!
Creative
07-02-2002, 08:52 AM
Just got a new AGOIA 1700 + "Y" and are running 1920 stable Prime @ 2.10 volts and it loops 3dmark @ 1935 but not Prime :)
Not as good a mhz overclock as the old 1600 AGOIA I had but only by about 10-20mhz though so Im pretty happy still
:)
kaniff
07-19-2002, 02:04 PM
Duron 650 @ 1050. Kicking it old school.
Athlon XP 1800+ @ 1764 Mhz. Keepin' it real.
And you probably don't want to hear about my P4. ;D
R0BB23
07-19-2002, 02:30 PM
1.4 tbird @ 1.6ghz, was having stability problems.
Found the problem, had nothing to do with the cpu.
So ill be uping it some more soon, hoping to reach at least 1.65 :)
LBJGH
07-22-2002, 04:55 PM
1GHz Athlon 'C' --> 171x8.5=1454
I have been able to run 100% stable at 1510 with 1.89v (1.90v)
my amateur review (http://members.rogers.com/lbjgh/epox_8k3a+.htm)
Silver
07-22-2002, 06:42 PM
This is about as good as it gets though I have done some testing at a touch more.;)
deerhunter
07-22-2002, 08:34 PM
That is a Screamer! Good Job! :toast:
What Cooling & Vcore?
Silver
07-23-2002, 01:33 PM
AIRDA, did not catch the week when I put it in (sorry). Vcore is 1.95 using a bong cooled 226w. Unlock on the 5th bridge. Have to run 3.1v on the Mushkin in order to get stability at that speed. Found something interesting yesterday when playing around. The new 30's and 30.30's would not allow as high an oc on the processor. They ran fine if I backed the processor down a little. The 28.90 on win 98se seems to work the best and allows the highest oc. I know, sounds strange. One other thing, when I used the 30.30 and the wcpredit mods then the system would go into automatic reboot. Strange again but if I did not use it then there was no auto reboot. Also played with the 2626 epox bios. Mighty fical (sp) one it is. Too unstable and again not as good scores. Went back to 2312. The foregoing may have much to do with the os.
AMD T-Bird 1200@1512 details see sig.
SPQQKY
08-16-2002, 01:58 AM
My first XP was a 1600+ AGOGA Y that did 1.78GHz locked before I killed it when after I unlocked it, the thermal sensor for my DigiDoc 5 slipped between the core and hsf while I was reseating it :(.
AXP 1900+ AGOGA Y @ 1.84GHz. Sad when you compare it to the 1600+.
I haven't really been able to test my new XP 2000+ AGOIA Y, but so far it'll do 1.87GHz with 1.9vcore.
MuFf|n M@N
09-02-2002, 11:22 AM
xp 1800+@ 1800mhz highest........... (stock multi)
running 3dmarks at 1765(195x9 1.85vcore)
mascot
09-11-2002, 05:52 AM
Here´s my AGOIA 1800+ with air..
I might get little bit higher when I finish up my air cooling system..
Temperatures are holding me down...:(
Hardass
09-11-2002, 05:56 AM
Welcome to the forum. Why don,t you put that nice oc to work on our folding team. We could use you.:toast:
Smizack
09-24-2002, 08:46 PM
Eh.. my 1800 can't be unlocked so it's just at 1.62 right now.
Waiting on the 2600 like so many others.
Wildone
09-28-2002, 08:47 PM
Athlon XP 1600+ @ 1880
capable of 1870 @220 fsb ;)
wildone
gobbo
10-03-2002, 03:31 AM
Athlon XP 2000+ @ 1900 air cooled
Still locked, but i will be unlcoknig this weekend and pumping up the FSB.
At the mo, temp is 47 load on air so i think i might just be able to squeze 1950 or possibly 2000.
AGOIA Week 16
LBJGH
10-03-2002, 03:59 AM
1600+ @ 1833mhz.... just stability testing
noskillz
10-15-2002, 08:15 PM
1600+ (1.4ghz) @ 2.02 @ 1.95volts
1.6a @ 2.944 @ 1.95volts
maphisto
10-19-2002, 03:12 AM
look at my sig'
i'll add that my sys is called "silent bob" air cooled and no fan is over 31.5 DBA
i have 6 80mm fans and 1 120mm fan , the temp are little high (50 - 59 c)but i'm bulding a nice water cooler,
stable as a rock.
Road_Runner
10-27-2002, 08:04 PM
My xp2400 at 2413 :)
http://home.sc.rr.com/dafrays/desktop.jpg
Redrum
11-01-2002, 08:03 PM
XP1600-F 0212 Its been over 1900 but I found stability at this speed. 178x10.5 1868.52Mhz. 1.95 V-Core,, 2.8 V-Dimm.
CASE:--------Chieftec AX-01SLD
PSU:----------Enermax 350 Watt Whisper Series
IDE DRIVE:--40 Gig. Maxtor 6E040L0 7200 RPM ATA 133
IDE DRIVE:--40 Gig. Seagate Baracuda IV 7200 RPM
COOLING:---4 Mechatronics 80m 53Cfm Fans
CPU HSF:----AX-7 & Mechatronic 80m 53 Cfm
MOBO:-------Epox 8K5A2+
CPU:----------XP1600 AGOIA-F 0212 @ 1868.52 Mhz
MEM:---------Corsair XMS PC3200C2 512 Meg
VIDEO:-------Nvida Riva TNT2 Model 64
AUDIO:-------Avance AC’97 Onboard
OS:-----------Windows XP Pro SP-1
MODEM:-----USR 2976 Hardware Modem
F-LOAD TEMPS: 28C Board 44C Cpu
IDLE TEMPS:---27C Board 28C CPU
Using VIA Cooling Tweak.
Karaya
11-19-2002, 03:01 AM
It's in my sig.
Paladin
11-20-2002, 05:31 PM
XP2400+ on pure air @ 1.82V
Highest that would complete a full 3DMark: 2275MHz (12.5x182)
Day-to-day: 2225MHz (12.5x178)
SupaMan
11-25-2002, 09:24 PM
1500+ (1.33GHz) @ 1.665GHz [9.5x185] AGNGA
A7V333 CE chipset
512MB Corsair XMS3000
Swiftech MC462A
thats right fewls....on AIR, with an ass stepping too :)
Merenfreak
11-29-2002, 02:40 AM
Mine is an AMD2400+ AIUCB 0240
@ 2845 Mhz Real clock @ 2,15 Vcore chilled by a prometeia
on an Epox 8K3A+ ( 190 X 15 )...
I am still testing on it and waiting for the Abit NF2 boards to improove my memory benchmarks.
Temps are, around 0 °C idle and 11°C Full load after a longer period of time. ( hmm, to high ? - i am not sure )
Cyas,
:p
antipop
12-01-2002, 01:54 AM
My old T-bird was a AYJHA 1.33@1.58 and now my AGOIA 4 1600+ is @1860MHz (i'll try to get more out of it maybe with a voltmod and a new mobo)
Everything is watercooled (see sig)
Liquid3D
12-01-2002, 04:58 PM
I posted and had WinXP running at 155FSB 2325MHz on my AXDA2400 AIUCB, 1.80V! Aircooled using a SLK-800. The temp was 19C! (I placed my PC near my window. when open my case temp drops to almost similiar.)
Hardass
12-01-2002, 05:07 PM
week 02/13. 1600+
Whitey
12-02-2002, 02:45 AM
XP 2000+ @1667Mhz Running@1825 on air, (SK-7) not unlocked.
Tweaked!
12-02-2002, 03:03 AM
Dual xp1600's @ 12 x 144 (1728) 38c on coolermaster hcc-002's
Crazymofo
12-13-2002, 05:14 PM
xp1600 @ 1589Mhz 9.5*166fsb If I could unlock a chip at all I know it could go higher but my memory is limiting my fsb so i'll be upgrading soon!
xp 1800 tbred @ 1.93ghz (193x10), i can get it @ 200 fsb but not stable enough to run 3dmark, but stable enough to do anything else without ever crashing. slk-800/vantec tornado cooling. BTW im new hi :D
Eyecannon
12-16-2002, 12:37 PM
AGKGA AXP 1600+ @ 1833 @ 2.2v @ Epox 8KHA+
Duron 950 @ 1050 @ Abit KT7A
Duron 750 @ 980 @ Abit KT7
Micutzu
12-18-2002, 07:06 AM
Previously :
Tb 900 @ 1.07
Duron 1G @ 1.3 (AHLCA 9)
Duron 1G @ 1.35 (AHLCA Y)
Now :
XP1600+ @ 1725 (AROIA 9) (can do 1800Mhz and more , but it's too hot)
mikedick6969
12-18-2002, 07:29 PM
All I can do on a locked proc. and no VMOD mobo and a VOLCANO 6Cu.
asus k8v
athlon64 3200+ @ 2170mhz 1.525
ocz pc3500 platinum limited edition 5-2-2-2 217mhz 2.8v