View Full Version : best ramm for dfi nf4 sli and ozw 600w
derprof
01-31-2005, 10:31 AM
Hi guys,
i search the best ramm for my combo dfi nf4 sli and ozw 600w and w winnie 3200+ spaw 0447 ,so i have enough voltage , but i want to reach htt 300 upto 330 but timmings @ 2-2-2 on is also good but whats the best.
i will buy the gskill 4800 is it the best for me?
thx guys,
regards martin
D_o_S
01-31-2005, 10:50 AM
YOU WILL NOT REACH DDR660 WITH CL 2 2-2-5!!! If you want to get that, you will have to get some BH-5 and run it at something like 4.6V! I'd reccomend the G.Skill or OCZ VX.
Hombre
01-31-2005, 11:09 AM
300+ 2-2-2? Keep on dreemin'...
You're not reading correctly. He said BUT so he's doubting between 300 mhz and ram with 2-2-2 timings. I'd go for the TCCD if I were you, since you can only use the 10x multiplier. If your UTT is maxed out at 250 you can't go higher than 2500mhz.
Chris85
01-31-2005, 11:29 AM
Hi guys,
i search the best ramm for my combo dfi nf4 sli and ozw 600w and w winnie 3200+ spaw 0447 ,so i have enough voltage , but i want to reach htt 300 upto 330 but timmings @ 2-2-2 on is also good but whats the best.
i will buy the gskill 4800 is it the best for me?
thx guys,
regards martin
He means what's best for him, high HTT or low timings... :rolleyes:
It all depends, in things like 3DMark01 the faster timings will be better, but in some other apps high HTT's will prove usefull...
perry_78
01-31-2005, 12:07 PM
Get either the OCZ VX (for benchmarking), or GSkill LE/LA (24/7). GSKill LE/LA will reach ca. 300 or maybe more, with relaxed timings, while the VX will reach ca. 270 with tight timings (2-2-2), but with VOLTS (3,2++). Therefore it is my opinion that VX is the best for benchmarking whilst the LE/LA kits are best for 24/7.
Running 330+ 2-2-2 would probably need the worlds best BH-5 and running them with nothing short of 5V, which is virtually impossible due to material restrictions.
i think go for the GSKill LE 4400.. maybe you can get what you want from them
but 300@2-2-2-x is quite unimaginable, i havent testet them my self but i would rather say you reach 300 if you reach 300@2-3-3-x
there was also just a post with the le´s over 290 so it should be 300 @2.5-3-3-7 @2,75v which is a real nice score link here (http://www.xtremesystems.org/forums/showthread.php?t=51718)