My dry ice container

[Jort]

hellow guys ;)

i am going into the dry ice and ln2 madness too.
i made myself a little baby :D

here are some pics:eek:

[Jort]

2nd

[Dissolved]

Gloves while Welding is always good. I learned a few lessions the hard way in metal shop in HS.


Looks Good, but that pipe is rather long..

[Jort]

3th,

[Jort]

tnx, the pipe is 40 cm long (about 15.74 inch)

yeah gloves can protect you against burning but i like brazing without them.



ps: -who woudn't know i do refridgeration @ school.(6th grade)
- the hose is nitrogin to protect the tube, cause hot copper and air makes the copper dark brown and that looks ugly
(used in an refridge-installation to occur moisture)

[Malachia]

diameter of the pipe???

[Jort]

5 cm or about 2 inch
wall of 2mm

[k|ngp|n]

Lookin good and good luck with your oc'ing...
That pipe is huuuuugge! LOL
Xtreme for sure ;)

[Jort]

tnx, if everything goes well its playing time next week(1 week holliday)
friend his FX-55(thought 3.1 on vapo LS) and my amd 3000+(2.75 on air so)

what do you mean with Xtreme? :confused:
:p:

[cold_ice]

Very nice, but do you don't use welding glasses?
Good luck with ocing!

[Jort]

it's not realy welding, and with welding glasses i don't see mutch so :p:
we always braze @ school with just glasses( except the one that was holding the hose, he's glasses where broke.) :p:

[k|ngp|n]

what do you mean with Xtreme? :confused:
:p:

XTREMEsystems.org :)

[Jort]

was just joking around

ps: srry about that

i like irony:p:

[twilius_basic]

Nice looking container m8 :) tho very tall :P Put it to good use :D

@k|ngp|n: nice avatar ;)

[Jort]

the guys on THG there container was almost same height.
they got a pritty good result :D

The 5 GHz Project

is linking to pic on thg forbidden?

[cold_ice]

it's not realy welding, and with welding glasses i don't see mutch so :p:
we always braze @ school with just glasses( except the one that was holding the hose, he's glasses where broke.) :p:
I know that this is brazing :p:
I'm asking because I like brazing with my oxy/propane torch without glasses more than with this "black glasses". But I don't know if it is very bad for your eyes.

[Jort]

idd me too. but if the flame isn't to light it normaly cant do harm i think.
why would they say @school use glasses and not "welding" glasses if its not safe.
so guess it's not a "big" problem

brazing with dark glasses is realy not easy when you have to do alot of brazing.

[cold_ice]

Ok thx, then I'll stick to brazing without glasses :D

[Jort]

Ok thx, then I'll stick to brazing without glasses :D

:toast:

[trans am]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=23730 lol looks like something I used to smoke out of when I was in High school. :toast: nice job!

[Jort]

did some base lapping today.
had no more grid 1000 so its grid 600 for now.

-first pic is after grid 230,

-and the other is after grid 600 and polishpaste

[Bennah]

Is that by hand or machine?

Good job ;)

[Jort]

by hand :)

[[XC] moddolicous]

i dont think you'll notice a difference in temp with 1000grit over 600. I might be wrong, but I think anything over 600 is useless other than looking good.

[Jort]

tnx for you reply, like youre saying its mutch more for looking good then temps.
the eye want something too doesn't it? :D

[[XC] moddolicous]

What I'm saying is I dont think the temps will increase from a surface lapped with 600grit sandpaper and 1000grit sandpaper.

[Bloody_Sorcerer]

well, the flatter the surface, the better the contact will be, so the better the thermal transfer will be. Its just that difference would probably be neglible at best.

[Malachia]

tnx for you reply, like youre saying its mutch more for looking good then temps.
the eye want something too doesn't it? :D


:toast:

agree 100%, also i like mirror-lapped coolings!

[Malachia]

What I'm saying is I dont think the temps will increase from a surface lapped with 600grit sandpaper and 1000grit sandpaper.


he replyed that you r in right, but 1000 is a lot more beatiful, is only for good looking 1000!

[Jort]

yep youre right about that.;)

[Jort]

i've got a question for the one who knowes the answer :p:
can plexi hold if the temps around it are -195(ln2 temp)

my plan was to make a container thats compatible with P4 s487, A64, P4 lga775
and make socket kits for each on in plexi

[Malachia]

i've got a question for the one who knowes the answer:p
can plexi hold if the temps around it are -195(ln2 temp)

my plan was to make a container thats compatible with P4 s487, A64, P4 lga775
and make socket kits for each on in plexi


policarbonato (don't know englidh name :( ) or PVC

[Jort]

like chilly1?
where could i buy it?
i live in belgium remember, in the usa you can buy everything @ local hardware shop :D

[[XC] moddolicous]

Malachia lives in Italy. I think what he means by policarbonato is polycarbonate, or plexi glas. You can try that.

[Malachia]

Malachia lives in Italy. I think what he means by policarbonato is polycarbonate, or plexi glas. You can try that.




:toast: :toast: :toast: :D


policarbonato is like plexy, but have more torsion resistence....

i buy it in a place that sold only plastic materials, like plexy pvc ecc ecc

[Malachia]

i whant to see insulation plz!!!!

[Jort]

today i made myself a gfx container, its perpose is to clock an x800 as high as possible
i'll show you some pics.

[Jort]

2nd

[Jort]

3th

[Jort]

4th

i'll take some pics of insulation asap(fixed)

[Malachia]

4th

i'll take some pics of insulation asap


thx :D


p.s good job ;)

[Jort]

thank you

pics are there

[cold_ice]

Well done!
54mm pipe? Looks almost the same as my gpu containers :D
Did you brazed the screws too?

[Jort]

no i didn't braze them, they are melted too because all the silfos :p:

55mm pipe:)

[Jort]

dry ice is ordered, 15 kg on the way.
going to have a very nice day tomorrow

[Nazaar]

lol 15kg is A LOT.

looking forawrd to the results

[Jort]

yeah when i got him on the phone i asked what can i think about if we order 10kg
he said like a square of 30cm
oke its big but hey i can take some with me and test @ my place with an mx420 that fits the container nicely.
en we have some spare left for fun :D

next time we would now exacly how mutch we need to fill 1 container.

ps: we are going to test, 3000+, fx55 and 2 times x800 so 4 refills.

i'll calculate whats the content of 1 container :)

[Jort]

1 container is 784 cm³
and 10 kg was square 30cm
if my calculations are right 27000 cm³
and 15 kg is about 40500³

i called and he said if you take 10kg=> have to pay extra for transportation.
15kg is tranportation free

and 20% gets lost after 24H
so i think we have enough then :stick:

[Jort]

and again an update of some stuff.
- pics of the board to mount the mobo on
- pics of insulation
- pics of bracket to hold the graficscard, or prevent braking of :p:

[Jort]

2nd

later this day i'll post some pics of total insulation of the containers

:toast:

[[XC] moddolicous]

Good job so far. Go for the highest 2001 score on the orb. I think you'll break at least 40,000+ with an FX-55 under DI. Anyways, Good Luck, and dont forget to post results.

[Jort]

no i wont ;)
yes there is a chance we hit some records

fx does 3.3 under vapo ls
and his 3500+ does 2.75 little above stock vcore and my 3000+ does that too so.(all stock cooling)
x800pro flashed to xt(voltmodded) does 681/644 wccooled

;)

[Jort]

benchingday was a succes and a non succes.

first, we got it all running for 4 hours straigh benching.
we managed to get 3.5 ghz stable on a fx 55

because my procc fell from 0.5m above groundlevel to 0m some pins where damaged.(concrete floor)
tried to get them all straight but 2 were hit too hard, so broke off.
going to test tomorrow if it maybe would work because i heared that some pins are there for no use.

x800 container was not optimal, his ass was to big so proper installation and insulation was not easy.
we got it running and core was -33 but we couldn't get it stable @ every setting and voltage.
going to update tomorrow when i got some sleep because 4-5 h of sitting outside and tonight(this morning :p: ) 6h of sleep is devestating.

pics will come, when i can release them
don't ask why or... just wait and see

ps: if you put dry ice in a bottle and close it it saids BOOOOOOM.
i'll post the movie with the pics


for info we got 15 kg of dry ice and after 5h straight with the last hour 2 containers we got 9+ kg spare


try to put a electric wire into the socket with the missing pins, it works ( richyb did it )

[blind_ripper]

nice ;)

[twilius_basic]

Good stuff dude :) Everyone's gotta learn the first time, and it seems like you had a long and informative benching session :cool: 3.5ghz stable FX-55 is very very nice :D

Good luck on getting the problems sorted out and going higher! :toast:

[Jort]

yeah its going to be next vacation.
in about 6 weeks so by then every insulation and mounting problem will be solved.
and where going to run some ln2 maybe :p:
where hunting WR.

[vinteg]

to bad the container didnt go so wel on the X800. :(

[Ow_jeih]

what CPU fell? the FX-55 or your AMD64 :eek:

nice project...keep it up !!!

[Jort]

fx is an amd 64 too.
its my procc that fell off.
look @ sig

[Jort]

have GOOOOOD news.

mobo was not dead and cpu neather.
so i've got 2 msi k8n neo2
an 3000+ and a new 3200+
3000+ with 2 missing legs still clockes excelent
3200+ is not that good 2.6 max on air

but almost no hardware-loss after all :toast:
mx420 is doing nothing atm, some further checking w'll happen

:D

[twilius_basic]

Always glad to hear there were no casualties :toast:

[SoF]

nice work...still missing pics ;)
hey you are a lucky guy, aren't ya? many of my hardware died during the last 2 months because of no reason...and a 3500+ was killed by our "post" :(
nice to hear that hardware isn't this sensible always ;)

[Jort]

pics are comming tomorrow.

talking about luck with hardware :D

[Malachia]

i have burned my A64 3200+ clawhammer last week btw :(

[Jort]

that suckes.
how did you do that?

[Malachia]

don't know....i have shut off pc and it never rebooted...

[blinky]

i have burned my A64 3200+ clawhammer last week btw :(
:brick:

:(

[Malachia]

now i am playing with 775 E0, i am going to build a new DY container and a phase change for vga...754 was quite old...


@blinky

i still have friends with A64, don't think you have win the war :D

[Jort]

were still running fine :D

http://users.telenet.be/jortcollijn/A64_overclocking/owned.JPG

http://users.telenet.be/jortcollijn/A64_overclocking/2841mhz.JPG

running beta watercooling :) (chipset and cpu)

[Malachia]

nice work, now let's rock :banana:


i also will present my new dry ice container until the end of next week

[meke]

Hi,
Your container is toooo big, you planned to make it run a long, ha?

My DI container was a cylinder at 42 mm Diameter and 2 mm wall thickness, and 400 mm height, holds a burning 3.6 prescott around 1/2 hours.

Reflect this capacity to yours, I hope that it will go for 1,5-2 hours without any feeding. :slobber:

[Jort]

My DI container was a cylinder at 42 mm Diameter and 2 mm wall thickness, and 400 mm height, holds a burning 3.6 prescott around 1/2 hours.

anyone? :stick:

if you read the topic you will see that my container is EXACT 400mm
and its 50mm diameter and thikness is about 2mm too
so your saying your container is too big too

1st=> i think no container is too big :rolleyes:
the bigger the container the bigger the pressure on the bottem and better results as result

2nd => DI run is already done, posted some posts above.
Pics will be here @ time.

[meke]

anyone? :stick:

if you read the topic you will see that my container is EXACT 400mm
and its 50mm diameter and thikness is about 2mm too
so your saying your container is too big too

1st=> i think no container is too big :rolleyes:
the bigger the container the bigger the pressure on the bottem and better results as result

2nd => DI run is already done, posted some posts above.
Pics will be here @ time.

yes you are right, then only the diameter is %25 bigger, thats ok.

So you reach max 1 hour for fx55?

[Jort]

we didn't mesure it. because we didn't have an temp probe for such temps we kept
the container always almost full of dry ice.

[Jort]

http://www.reviewers.be/images/post/pic2.JPG

http://www.reviewers.be/images/post/pic7.JPG

http://www.reviewers.be/images/post/pic6.JPG

http://www.reviewers.be/images/post/pic12.JPG

http://www.reviewers.be/images/post/pic4.JPG

http://www.reviewers.be/images/post/pic3.JPG

http://www.reviewers.be/images/post/pic5.JPG

http://www.reviewers.be/images/post/pic10.JPG

http://www.reviewers.be/images/post/pic9.JPG

http://www.reviewers.be/images/post/pic14.JPG

http://www.reviewers.be/images/post/pic1.JPG

http://www.reviewers.be/images/post/pic8.JPG

http://www.reviewers.be/images/post/pic11.JPG

http://www.reviewers.be/images/post/pic13.JPG

http://www.reviewers.be/images/post/pic19.JPG

http://www.reviewers.be/images/post/pic20.JPG

http://www.reviewers.be/images/post/pic15.JPG

http://www.reviewers.be/images/post/pic17.JPG

http://www.reviewers.be/images/post/pic18.JPG

http://www.reviewers.be/images/post/screen2.JPG

http://www.reviewers.be/images/post/screen1.JPG

http://www.reviewers.be/images/post/screen3.JPG

comment on the way but going to sleep now. ;)

[Unseen]

very nice bro :)

[twilius_basic]

Nice pics m8 :toast: FX @ 3466mhz is nice :D

[Malachia]

really nice work bro!!! :toast:

[Jort]

tnx,
i think we can hit even 3.5 but temps weren't stable.
we haven't got a good thempsensor.
i only shows -50 and then only "L"

btw we made a movie of the dry ice bomb :D
http://users.pandora.be/timtitanium/lol/MVI_2554.avi :p:

[Malachia]

lol, nice bomb :P

[Jort]

hehe thats what the neightbourhood thinks too i guess

i am the one in white vest:)

[LardArse]

Very hardcore and very good scores! :cool:
Plus I love that dry ice cooled graphics card, benching with containers always gives me a certain feeling of excitement :D

[meke]

The smd's around the cpu socket are very sensitive on msi A64 board, we couldn't even boot on the second A64 sistem when we try our rig with asus intel try.

[[XC] moddolicous]

Good job chillingdude! Now all you have to do is run 3d01.

[Jort]

thats for within 3 weeks, then its the next dry ice run :)

[Waus-mod]

@ Chillindude

Whats the measurement of the copper block?

[Jort]

6cm x 11cm x 10mm

[Jort]

made the mountingsystem:D
its not 100% done because my baseplate of my current container is too large.
can mount the p4 holes and not in the mood to apply it on my A64
i tested the plexi a bit and its rock solid :) (if you don't apply 10T on it)

here are the pics;)

http://users.telenet.be/jortcollijn/project%20dry%20ice/plexi+ring.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/plexi+ring_side.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/sandwich.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/sandwich_side.JPG

[Waus-mod]

How many kilos of DI are in that plastic box?

[Jort]

15kg to be exact;)

[[XC] moddolicous]

Thats alot of dry ice. BTW, did u ever think about cooling your video card with DI, since u have soo much?

[Waus-mod]

eeeeeh @ moddolicous, didnt you see the first post of this page? :stick:

[Jort]

yeah maybe actualy read the article, mutcho info is given;)

[Jort]

got it done

plexi is to big so can't put nb heatsink on.
i'll fix it (don't have mutch time) :(
http://users.telenet.be/jortcollijn/project%20dry%20ice/other_shot.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/almost_done.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/cant_wait.JPG

i'll post pics of the insulationpart asap

[Jort]

here they are

http://users.telenet.be/jortcollijn/project%20dry%20ice/insulation1.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/insulation2.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/insulation3.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/done.JPG

update when i've got one

[twilius_basic]

Nice hold-down.

Where does one aquire plexi-glass?

[Jort]

got this pease @ school.
but i contacted a company where they sell plastics, its 140€ +21% btw for 1m on 1 m, 1cm thick:)

because i am going to sell some containers its no problem for me to get the prize back

[Malachia]

OMG is really expensive....here i pay 2€ for 3 pieces of "policarbonato" (it looks like plexy, but is solid like a rock, unbreakeble!), each piece in mm is 100x100x5!!!

[Jort]

5mm is that enough?

life is expensive you know:p:

[Malachia]

5mm is that enough?

life is expensive you know:p:


5mm "policarbonato" is pure rock!!!!

i have broken 13mm plexy, but not 5mm of this!

[Jort]

i'll ask for it.

is it the same chilly1 is using?

[Jort]

i changed the holddown a bit to make it look better

http://users.telenet.be/jortcollijn/project%20dry%20ice/stylenr1.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/stylenr2.JPG

;)

[Malachia]

i'll ask for it.

is it the same chilly1 is using?


no that is PVC, but is good also PVC ;)

[Jort]

another dry ice run is almost comming.
5may is the day.
i am posting on some forums localy to ask if someone is intrested.
i am going to provide 12 containers if everything goes well
6 cpu and 6 gfx

there is going to be enough DY, somewhere about 30-40 kg :D

youre going to see some movement on the orb :rehab: :rehab: :rehab:

[Jort]

working on an new gfx container.

http://users.telenet.be/jortcollijn/project%20dry%20ice/gfx_container.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/gfx_container2.JPG

;););)

[Hugo van Dijk]

How much do you ask for cpu containers :)

[Jort]

prolly around 45€

i don't know the exact prize because i receive the tube tomorrow.
i have calculate how mutch holddown and rings i can cut out of the plexi.
and prize of insulation etc,

i'll post it when i got more info:)

[Jort]

http://users.telenet.be/jortcollijn/project%20dry%20ice/holddown+rings.JPG

still need to do the other 5 piece's

[Jort]

http://users.telenet.be/jortcollijn/project%20dry%20ice/holddowns_ready.JPG

done :)

[Jort]

don't forget to watch to the livestream thats going to be there @ 5 april
http://jortcollijn.ww.com/

[Hugo van Dijk]

don't forget to watch to the livestream thats going to be there @ 5 april
http://jortcollijn.ww.com/

Lol nice, I will watch it (how late does it begin) :slobber:

[Jort]

it starts around 1pm and finished @ very late.
time is GMT 3+

[Hugo van Dijk]

it starts around 1pm and finished @ very late.
time is GMT 3+

I hope that you can break the record, Good Luck :toast:

[Jort]

tnx, w'll do our best

[DeNs]

VERY nicely done :) I just got 50cm of 50mm tubing (2 inch) and i'm now looking around for a place that can sell me some 3 inch tubing.

I'm going to put the 3 inch stuff over the 2 inch, so it's double walled, and i'm going to put a seal on the top, put a valve on the outside piece of tubing, and solder it all together. Will take a while to do since I don't think i'm gonna be able to find the 3 inch tubing for cheap in a hurry (everyone wants to sell me nice long pieces and doesn't want to cut what they've got) but there will hopefully be a video when i've finished it all.

Again, nicely done :) You said the 5th of may then mentioned the 5th of april, but which one is it? :)

---dens

[Jort]

http://users.telenet.be/jortcollijn/project%20dry%20ice/stuff1.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/stuff2.JPG

[Jort]

5 April ;)

[Hugo van Dijk]

Jort do you already now what you are going to ask for the containers.

[DeNs]

Haha damn you! I want that copper! :D What's the diameter of that stuff anyway?

---dens

[BigPanda]

hey are you also going to make a movie of it because i dont think ill be awake as i am gmt -5hours

[Jort]

2" 1/8 is the exact size.

nope i don't paid the copper tube yet so i don't know the priz.

btw i made 2 cpu containers allready ;)

http://users.telenet.be/jortcollijn/project%20dry%20ice/container_feet.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/container_feet2.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/container+feet+holddown.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/sideview2_container.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/topview_container_installed.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/complete.JPG

btw don't worry about the tube thats wider then the baseplate.
it was on purpose, the baseplate needed to be that small because of the compability of LGA and AMD XP

:toast:

[JacobHansen]

Looks really nice Jort - :) top nice tubeing.

Could you send me a 60cm hehe?.. i cant seem to get a hold of it here in denmark. :(
PM, me if you dont mind.

[Jort]

http://users.telenet.be/jortcollijn/project%20dry%20ice/container_family.JPG

keep the containers comming :banana: :banana: :banana:

:toast:

[Hugo van Dijk]

keep the containers comming :banana: :banana: :banana:

:toast:

:slobber: :slobber:

[blind_ripper]

jorts little army of cooling down white dry ice and ln2

[Jort]

and 1 more cpu container.

starting with the gfx now because i almost ran out of oxygen.
if there is no more left @ the shop tomorrow i'll still have few gfx containers:p:

[Jort]

jorts little army of cooling down white dry ice and ln2

with;)
white is a colour :D

[blind_ripper]

color u meen :p:

[Jort]

damn you:p:
k we are not english geniuses:D

[BigPanda]

What scares me is most forigeners are better at english then me :eek:

[Jort]

:hrhr:

base for gfx container is drilled, going to braze it now :toast:

[[XC] moddolicous]

wow, that looks real nice. You should try to make a container for your ram. There's a thread in the 3d mark team where someone did 290 on Bh5 2-2-2-5. Only AMD?

[Jort]

nope,

amd64, Amd socketA, P lga 775, P S487

[Jort]

family picture?

http://users.telenet.be/jortcollijn/project%20dry%20ice/chhheeeezzzee.JPG

the far right one was a beta container, check it at my other thread of my gfx:)

tomorrow the last day of working on containers i'll make another one with elbow design
and one for between sli cards. and maybe i'll fix that beta-container so i'll have 3 more and 10 containers ready.

[blind_ripper]

that are a lot of containers :banana:
we are goning to the top

[vinteg]

me is getting horney of those thight containers :p

[C_X]

nice familie picture ;)


see you tomorow jort on the hapening :D

[BigPanda]

y cant i live in belguim and come watch?

Anyone in northern new jersey do this?

[Jort]

organize such party @ your place :D
i'll provide containers:p:

[BigPanda]

ya im trying to figure out how to make one. the problem is i only got a sodering torch and the guy down the street wont trust me with his torch because im only 14 :)

[Jort]

ow, yeah thats a little young to understand how to braze and stuff.
the years will provide you knowledge till you can make your own;)

[blind_ripper]

and im only 16y tis sumer im gone experement withe dry ice :D
on my p4 and 9800pro@xt + finali vmod on the mem and the core btw cant get core no more stabel on 500mhz withe stock voltage :(
jort whate do u think that il hit whit tis card 9.5k or les maby nieuw amd 64 wille help

[Jort]

9500 3dmark03?

[blind_ripper]

yes

[Jort]

pm me your specs, we shouldn't get offtopic:)

[BigPanda]

lol

[Jort]

helow back again xtreme members;)

i have a ln² container in progress, its larger and BIGGER.

here are some teasers:

where going hard again.

here i present the new ln² container in progress;)
(no base is applied yet)


http://users.telenet.be/jortcollijn/project%20dry%20ice/ln%b2container.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/ln%b2container_feet.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/ln%b2container_closeup.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/belgium_pride.JPG

belgian pride :banana:

[Malachia]

why you have soldered a tube on the top???

[Jort]

brazed, but im am going to move it to the inside, otherwise i cant put a holddown over it.

beta holddown online about 15 min


why you have soldered a tube on the top???

to put my flag in:p:

[Nazaar]

:owned:

nice work :)

[harleybro]

Whats the purpose of putting a small tube inside a larger one(not talking about the small tube on top(flag holder)). I ran DI for the first time this weekend (was extremely fun) and am thinking of building a container to run my graphics card on it also.

[BigPanda]

yo that flag is a sweet idea. Do you mind if i browowe (sp?) it?

whats your design for the base?

[Malachia]

you are crazy bro...a flag holder...buahahahahaha

[Jort]

Whats the purpose of putting a small tube inside a larger one(not talking about the small tube on top(flag holder)). I ran DI for the first time this weekend (was extremely fun) and am thinking of building a container to run my graphics card on it also.


AH thats to compare with my previous containers :D

btw you'll see pics of us soon, you will recognize us with the belgian flag :stick:

[Jort]

here we go again :D

http://users.telenet.be/jortcollijn/project%20dry%20ice/sawing_the_copper2.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/sawing_the_copper.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/difference.JPG

this was my main idea with copper nails in it but didn't have them and i wanted to braze the container together so fixed something else:)

http://users.telenet.be/jortcollijn/project%20dry%20ice/ln%b2base_drilled.JPG

this is the idea i came up, just some small plates of copper to increase the surface

http://users.telenet.be/jortcollijn/project%20dry%20ice/increased_surface.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/closeup_feature.JPG


pic of the 3 containers + spare tube

http://users.telenet.be/jortcollijn/project%20dry%20ice/record_containers_present.JPG

all containers insulated with very thick armaflex

http://users.telenet.be/jortcollijn/project%20dry%20ice/insulated_containers_present.JPG

cpu container insulated:

http://users.telenet.be/jortcollijn/project%20dry%20ice/special_feature_inside.JPG

good bye :bravo:

[twilius_basic]

Again, cool work dude :)

[Jort]

tnx, i hope the base isn't to thick.

there was a discussion for whats the best base, therefor i've got a spare tube so i can make one with 1cm base to this weekend

[FireDragon]

Hey nice job there, I am making one for DI this weekend I made for normal ice and water but it goes by WAY to fast...i am goign to make the base with some surface area around the CPU like 12 2 inch by 1/8 inche spikes or something...idk i will think of somethin

Dragon

[Jort]

holddown complete, now i have to make one to fit the ln² container.

http://users.telenet.be/jortcollijn/project%20dry%20ice/holddown_completed.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/holddown_present.JPG

;)

[Waus-mod]

works good hé! that plastic is really great stuff for mounting.

[Jort]

don't know but many people use it.
1 thing for sure, its easy to work with. doesn't melt like plexi

[Jack]

Nice work on the tubes :)

i like the thread aswell, lot's of pics :D :toast:

[Jort]

tnx, pics say more then 1000 word's:)

so i'll post 1000 pics :p:

have to move to other webspace because mine is full

[BigPanda]

i can host them if you wish i got 2gbs of space and 120gb of bandwith hardly being used right now.

[FireDragon]

Hey nice job I CNCed a hold down for mine...I am making an LN2 "pipe" I can get LN2 at a hospital near my house


Dragon

[Jort]

atm i don't need extra hosting.
i have a account on a belgian site here and when your a member you get 1gb for free.
the only sad thing about it, there are 1000+ people a day browsing that site so i can get slow.
i'll consider your offer

[FireDragon]

how did that work out witht he nails i have copper wire in mine...and that was a pain...maybe i will braze the wire in then solder the outside so that the barze wont melt but the solder will flow...hmm...

Dragon

[Jort]

how did that work out witht he nails i have copper wire in mine...and that was a pain...maybe i will braze the wire in then solder the outside so that the barze wont melt but the solder will flow...hmm...

Dragon

nails?
i don't have any nails, it was an example.

after that i brazed plates into the container :)

[Jort]

tralalalallala :stick:

:slobber:

who can pick the best ln² container :D

http://users.telenet.be/jortcollijn/project%20dry%20ice/the_3_kings.JPG



:woot:

[Rio71]

how did that work out witht he nails i have copper wire in mine...and that was a pain...maybe i will braze the wire in then solder the outside so that the barze wont melt but the solder will flow...hmm...
Dragon
hey nice.. i would build an similar pin-setup.
can you post pics..? :D

[BigPanda]

tralalalallala :stick:

:slobber:

who can pick the best ln² container :D

http://users.telenet.be/jortcollijn/project%20dry%20ice/the_3_kings.JPG



:woot:
middle one

[Jort]

someone know what this is :slobber:

http://www20.tomshardware.com/cpu/20031230/images/stickstoff1.jpg

:stick:

guess what, i am going to have 2 off them this evening :slap:

containers contains 25L each :woot:

[twilius_basic]

Pic don't work.

[Jort]

it does here
http://www20.tomshardware.com/cpu/20031230/images/stickstoff1.jpg

[Revage]

it does here
http://www20.tomshardware.com/cpu/20031230/images/stickstoff1.jpg
no it does not :p:

[Jort]

http://www.xtremesystems.org/forums/attachment.php?attachmentid=29700&stc=1

i hope now?

[BigPanda]

looks xtreme :slobber:

[Rio71]

its an dewar for liquid nitrogen (deep-cold, class2) .. printed in german.. :D
red sticker says: "attention, only for unpressurized transport, read the manual"

[Jort]

i know what it is, but tnx for the translation i don't speak german

belgium is next to germany but its just not my language:D

[Jack]

Youre gonna get 50L of LN2?
why the hell would you need so much?

cool nontheless :toast:

[cold_ice]

Is this your container or did you rent it?

[BigPanda]

I'll make sure to watch one. 50Ls Damn

[Jort]

due a misunderstanding couldn't get 50L :( (they didn't have those containers available for me :stick: , next time better communication. tought that i owned a dewar)

only 36L :slap: :D

http://j0rt.zattevrienden.be/jort/ln%B2/pic2.JPG

http://j0rt.zattevrienden.be/jort/ln%B2/pic3.JPG

http://j0rt.zattevrienden.be/jort/ln%B2/pic5.JPG

http://j0rt.zattevrienden.be/jort/ln%B2/pic4.JPG

http://j0rt.zattevrienden.be/jort/ln%B2/pic6.JPG

http://j0rt.zattevrienden.be/jort/ln%B2/pic7.JPG

http://j0rt.zattevrienden.be/jort/ln%B2/pic1.JPG



:slapass:

[Jort]

CAMERA NOT ALOUD ON SITE

http://j0rt.zattevrienden.be/jort/ln%B2/filling_ln%B2.wmv

http://j0rt.zattevrienden.be/jort/ln%B2/closing_valve.wmv

:owned: :cord: :wiggle: :wiggle: :wiggle:

[Waus-mod]

Are there getting any results this evening?

[harleybro]

Really curious to see the results. The place I get my DI also has LN2 the container is the only problem. :(

[BigPanda]

yea same dont have the money for the container

[Revage]

http://images.koffer.ee/uploads/4691a01167.jpg (http://images.koffer.ee)
my dewar :p:

[Jort]

your nice:p:

[Jort]

going to make a container next week with a new block(its a chilly1 clone)

http://www.xtremesystems.org/forums/attachment.php?attachmentid=33400&stc=1

the small one is original from chilly1, a friend got it with the compressor toss competition. and he sold it because he stepped down from phase-change and oc'ing.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=33402&stc=1

[Waus-mod]

those blocks are a nice piece of work. Do you also gonna build ln2 containers out of it?

[Jort]

in the future yes:)

have to let the company make 20 to get the prize down, prize of this block was a little high:)

so need to sell some to people and me work some so i get some cash:)

[...:::MadDog:::]

Tank's Jort for the container..
I will Post my results in a few days

http://img140.imageshack.us/img140/9591/imag00085wi.jpg
http://img140.imageshack.us/img140/5889/imag00094oh.jpg
http://img140.imageshack.us/img140/6997/imag00048ba.jpg
http://img140.imageshack.us/img140/5976/imag00120nw.jpg
http://img140.imageshack.us/img140/7994/imag00024ej.jpg
http://img140.imageshack.us/img140/4260/imag00147ng.jpg

this is very professional.. love it.

Hug'z

[Jort]

have fun with your new container;)

if you have results, make another thread at the overclocking region.
so more people will look @ it;)

greetz

[Jort]

here we go again :D

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic1.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic2.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic3.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic4.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic5.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic6.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic7.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic8.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic9.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic10.JPG

tomorrow brazing time ;)
:woot:

[...:::MadDog:::]

its terrific..

nice container..

that base.. its 200%..

men, you are there... yes you are.

:clap: :clap: :clap: :clap: :clap: :clap: :clap:

[Jort]

design is chilly1, so give him the cheers:)

i'll try to prove again chilly1 containers just rock:)

[Waus-mod]

Really nice work jort. youre going the right way ;)

[Jort]

brazed ;)

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic11.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic12.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic13.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic15.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic16.JPG

;)

[Jort]

brazed ;)

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic11.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic12.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic13.JPG

drilled a hole tu put the temperaturesensor in it:)

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic15.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic16.JPG

;)

[...:::MadDog:::]

my next container, will be like that one.

god work men, i whant to see that container in action.

[Jort]

mounted on mobo:)

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic17.JPG

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic18.JPG

greetz and thanks;)

[ZX7891]

Yeah thats nice.

[justwOo]

Very nice and professionally done

[Dani]

What's do you use between container and hold down?

[Jack]

What's do you use between container and hold down?
nothing i presume since the holddown is made of nylon (if i remember correctly). Nylon doesn't conduct heat.

[Jort]

its ertalite, a non conductive plastic. only a little.

its used for cuttingboards at food industry or just local restaurant:)

[Dani]

Thanks Jort, I think I gonna destroy my cuttboard now :D
How thick armaflex do you use on mobo? 15mm?
Can you show your socket without container (with insulate)

[Jort]

:buddies: :D

[Dani]

Checm my edit :cool:

[Jort]

exact, 15mm it is:)

i'll try to find pic with insulation:)

[Jort]

http://users.telenet.be/jortcollijn/project%20dry%20ice/pic30.JPG

the best i've got so far.

left is gfx with naildesign and right is cpu container with chilly1 design :)

[Waus-mod]

nicely done jort. as normal ;)

[Jort]

Does this say enough? max basetemp

base whas just cleaned, no time to lap it:)

http://www.xtremesystems.org/forums/attachment.php?attachmentid=34019&stc=1

fx55 at stock speeds running superpi

http://www.xtremesystems.org/forums/attachment.php?attachmentid=34020&stc=1

fx55 at 3.5 ghz running superpi

http://www.xtremesystems.org/forums/attachment.php?attachmentid=34021&stc=1

this was the same fx-55 me and a friend tested, the max was around 3400.
with the new container we could clock 100 mhz higher.

don't have further results,

greetz,
Jort

[Jort]

once you start with dice you get addicted to it :bows:

edit: btw your sig is outdated ;)

[justwOo]

What swith the AMD box?

Just to increase the length and stop from bubbling?

[EMC2]

Does this say enough?

base whas just cleaned, no time to lap it:)

fx55 at 3.5 ghz running superpi

this was the same fx-55 me and a friend tested, the max was around 3400.
with the new container we could clock 100 mhz higher.

:up: That says enough, Xcellent results :toast:

[Jort]

What swith the AMD box?

Just to increase the length and stop from bubbling?

actualy its just for fun
:slap:

[Waus-mod]

Nice work as always!!!! you will let us see some great things soon i hope :banana:

[PoL]

How much were those 36l of LN2? :)

[Jort]

haven't received bill.

there like ...... 4 months late, i am not complaining:D

i think it was about 50€ for 36

[PoL]

And how long did the 36l last? :)

[Jort]

we actualy didn't bench with it for a long time.

because the cpu had massive coldbug below -50 and fx-55 wasn't available.

i tell you one thing, it lasts long enough for a good bench:)

[PoL]

Yeap, I know, but I was wondering what would be cheaper, Dice or Ln2... :rolleyes:

[Jort]

dice because it last longer, on the other side ln² because you get more mhz and maybe a WR.

you know how many people need to pay to get a WR(system, cooling etc...)

[PoL]

Yea, that's. But actually I don't see it so much expensive... :D
I wonder where I can buy LN2 here in Spain... I know where to find Dice, but not LN2... :P

[Jort]

try http://www.airliquide.es/:)

and ask them where there are resellers:)

[PoL]

try http://www.airliquide.es/:)

and ask them where there are resellers:)

Thanks dude! they got a lotta resellers and distributors.. :D
I'll try to call some tomorrow... :)

[Apocalipsis]

Hi Pol, I buy LN2 from Carburos Metalicos, here is their website: www.carburos.com (http://www.carburos.com)

[Always]

Hi pol, try here, they are cheaper than carburos, 2.77€/kg of 13mm pellets if I remeber correctly:

Abello Linde S.A.
Callo Bailen 105
Barcelona
Spain
08009


Telephone: +34 93 476 74 08
Fax: +34 93 207 57 64

[Waus-mod]

I think you guys have to try anything else. Because i can get it the half cheaper than always. The thing you have to do is to go to the near by college or university, these guys have loads of dry ice.

[PoL]

Hi Pol, I buy LN2 from Carburos Metalicos, here is their website: www.carburos.com (http://www.carburos.com)

Thanks man! I'll call them on monday. I called the Liquid Gas guys, and told me it was 3€/Kg, but the problem is that thay don't rent containers, and they were kind of 620€..... :slap:


Hi pol, try here, they are cheaper than carburos, 2.77€/kg of 13mm pellets if I remeber correctly:

Abello Linde S.A.
Callo Bailen 105
Barcelona
Spain
08009


Telephone: +34 93 476 74 08
Fax: +34 93 207 57 64

I called them, and that's where I buy Dice, but I think they don't have LN2... :P


I think you guys have to try anything else. Because i can get it the half cheaper than always. The thing you have to do is to go to the near by college or university, these guys have loads of dry ice.

I've tried that, and well, I can even get it for free... The problem is that they are pretty huge blocks, kind of cubes of a 200mm side...
So I'd have had to make'em smaller... :nono:

[Jort]

just hammer them to pieces and your fine, its a little more hassle but for free i won't doubt at ALL

[PoL]

just hammer them to pieces and your fine, its a little more hassle but for free i won't doubt at ALL

Yeaa... actually you're right, but dunno if the performance will be the same. What do you think?
Aside from that, I heard somewhere that it's not really safe to hammer a big block of dice... :shrug:

[Jort]

why shouldn't it be safe? just use gloves.

dry ice is dry ice, its just easier work with pellets.
just hammer them small enough and you will be fine.

;)

[PoL]

I'll try it then. :)
But I'll have to buy a box or something, cuz got no cointainer... :P

[Jort]

just a styrofoam box, go to local fish store and ask it:)

[harleybro]

I'll try it then. :)
But I'll have to buy a box or something, cuz got no cointainer... :P
Actually paper bags work well for di also layer a few of them together and it should work. ;)

[PoL]

Actually paper bags work well for di also layer a few of them together and it should work. ;)

But ordinary paper bags? Those from the supermarket? And what about plastic bags filled with newspaper paper? It'd be the same, right?

[justwOo]

Yeah styrafome boxes are like $3 for one that holds like 8kg
Plastic bags dont work as far as I know.. the Place I get my dry ice from always gives it to me in paper bags as well

[Apocalipsis]

Hi pol, try here, they are cheaper than carburos, 2.77€/kg of 13mm pellets if I remeber correctly:

Abello Linde S.A.
Callo Bailen 105
Barcelona
Spain
08009


Telephone: +34 93 476 74 08
Fax: +34 93 207 57 64

Well, I was talking about LN2.

I buy Dice from PRAXAIR.