PDA

View Full Version : Info Corsair PC4400C25


overfusion
01-31-2005, 02:30 AM
Hi, i want an information on CORSAI PC4400c25 BLACK.....they're a good ram for overl:banana::banana::banana::banana:? Do they arrive at 280-290Mhz :stick: ?

Thanks.


WOW this is my firs tread.
STEvil
01-31-2005, 02:46 AM
welcome.

If they have TCCD its quite possible they could do so, more likely in 2x256 configuration than 2x512. Will depend on your system a lot also.
Micutzu
01-31-2005, 02:55 AM
Corsair 3200C2 v4.1, 3200XL and 4400C25 are all TCCD and come with BrainPower PCB. They're pretty much the same thing, maybe the 3200C2 is a little worse. All should do 275-280 at 2.5-3-3-7 in 512MB sticks. My 2X256MB 3200C2 does 285 at those timings by the way.
bias_hjorth
01-31-2005, 04:43 AM
Welcome to XS overfusion :toast:

If you´re lucky you´ll probably reach 280-290 :)
overfusion
01-31-2005, 06:15 AM
Thanks very much!!!!. :) :) :) ....

My future systems (next week :banana: ):
DFI SLI-DR
2x512 Corsair
POV 6600GT
AMD 3000+@2500Mhz v.core default

I have had an ASUS A8N-SLI Deluxe, but it wasn't a good moderboard for overclcok, it was more stability at default but more instable over 250Mhz HTT
JNav89GT
01-31-2005, 06:36 AM
Corsair 3200C2 v4.1, 3200XL and 4400C25 are all TCCD and come with BrainPower PCB. They're pretty much the same thing, maybe the 3200C2 is a little worse. All should do 275-280 at 2.5-3-3-7 in 512MB sticks. My 2X256MB 3200C2 does 285 at those timings by the way.
C2 v4.1 is Samsung TCC5 not TCCD

newer XL is either TCCD or TCC5, 4400C25 is for sure TCCD on brainpower PCB. I would spend the extra and get the 4400 if you want corsair for sure. Mine topped out at 280 in testing at 2.5 3:3:10 timings. Might go a bit higher with better board.
Micutzu
01-31-2005, 06:44 AM
4.1 is TCCD, the 4.2 is either TCCD or TCC5. And i doubt TCC5 can do 2X256MB 285Mhz 2.5-3-3-7 memtest stable.
JNav89GT
01-31-2005, 07:10 AM
guess I got that mixed up then!
RussianBlue
02-03-2005, 12:39 PM
They've got it at the top of the list, in what is, in general, a very educational write-up on TCCD in general.

http://www.anandtech.com/memory/showdoc.aspx?i=2312&p=19

I do have a question though. If I price the stuff over at Newegg, why is the 4400C25 w/Platinum Heat Spreaders $325 and the version with Black HS's is $265. Is that based purely on demand? That's crazy.
D_o_S
02-03-2005, 12:50 PM
Welcome to the forum :toast:

At first I was considering those, but as I cannot get them, I'll probably get G.Skill (which IMHO is better anyways).
Sup3rman
02-03-2005, 01:11 PM
Corsair PC4400c25 is very good ram 280-290 @ 2.5-3-3 should not be a probem
Zanr Zij
02-03-2005, 02:24 PM
Corsair 3200C2PT 256x2....

http://vozforums.com/attachment.php?attachmentid=12782
overfusion
02-05-2005, 04:46 AM
Welcome to the forum :toast:

At first I was considering those, but as I cannot get them, I'll probably get G.Skill (which IMHO is better anyways).

The G.Skill is better than Corsair, they arrive at 620-640Mhz
RussianBlue
02-05-2005, 05:29 AM
wow! lots of G.Skill model numbers...

any suggestions or is it completely dependent upon exactly what one is hoping to achieve? let's just assume a combination of medium-grade watercooling, new DFI-SLI mobo, and FX-55 CPU. Would that help narrow down the field?

Model Number :
F1-3200DSU2-512LA / F1-3200DSU2-1GBLA:
PC4800(DDR600) 3-4-4-8 PC3200 2-2-2-5 (Dual channel)
(CPU:L2 =512k--->3500+(2.2g) AND 3800+(2.4ghz),(L2=1MB--->FX53
(MB:K8:754 & 939:Strong Recommand DFI LP UT NF4 Ultra-D;DFI LP UT NF4 SLI-D;DFI LP UT NF4 SLI-DR;MSI:K8N NEO4 Platimin;MSI:K8N SLI Platimin;MSI:K8N Diamond;

F1-3200DSU2-512LB / F1-3200DSU2-1GBLB:
PC4800(DDR600) 3-4-4-8 PC3200 2-3-3-6 (Dual channel)
(CPU:L2 =512k--->3500+(2.2g) AND 3800+(2.4ghz),(L2=1MB--->FX53
(MB:K8:754 & 939:Strong Recommand DFI LP UT NF4 Ultra-D;DFI LP UT NF4 SLI-D;DFI LP UT NF4 SLI-DR;MSI:K8N NEO4 Platimin;MSI:K8N SLI Platimin;MSI:K8N Diamond;

F1-3200DSU2-512LC / F1-3200DSU2-1GBLC:
PC4400(DDR550) 2.5-4-4-8 PC3200 2-2-2-5 (Dual channel)
Recommanded MB:K8 939:Motherboard:
MSI_K8N_NEO2 Platimun,K8N_NEO4,EPOX:9NDA3+

F1-3200DSU2-512LD / F1-3200DSU2-1GBLD:
PC4300(DDR533) 2.5-4-4-8 PC3200 2-3-3-6 (Dual channel)
Recommanded MB:K8 939:Motherboard:
MSI_K8N_NEO2 Platimun,K8N_NEO4
EPOX:9NDA3+

F1-3200DSU2-512LE / F1-3200DSU2-1GBLE:
PC4400(DDR550) 2.5-3-3-7 PC3200 2-2-2-5 (Dual channel)
Recommanded MB:K8 939:Motherboard:
MSI_K8N_NEO2 Platimun,K8N_NEO4
EPOX:9NDA3+

F1-3200DSU2-512LF / F1-3200DSU2-1GBLF:
PC4400(DDR550) 2.5-3-3-7 PC3200 2-3-3-6 (Dual channel)
Recommanded MB:K8 939:Motherboard:
MSI_K8N_NEO2 Platimun,K8N_NEO4
EPOX:9NDA3+

F1-32005SU2-512LA/ F1-32005SU2-1GBLA:
PC4000(DDR500) 3-4-4-8 PC3200 2-3-3-6 (Dual channel)

F1-40005SU2-512LB/ F1-40005SU2-1GBLB:
PC4000(DDR500) 3-4-4-8 PC3200 2.5-3-3-6 (Dual channel)
IronAge
02-05-2005, 01:42 PM
those ones if you want to get a DC Kit for Nforce3/4 S939.

F1-3200DSU2-512LE / F1-3200DSU2-1GBLE.
IronAge
02-05-2005, 01:46 PM
Hi, i want an information on CORSAI PC4400c25 BLACK.....they're a good ram for overl:banana::banana::banana::banana:? Do they arrive at 280-290Mhz :stick: ?

Thanks.


WOW this is my firs tread.


This review will answer all your questions concerning the C4400C25.

http://www.anandtech.com/memory/showdoc.aspx?i=2312

You might have a look at this review too:

http://www.madshrimps.be/?action=getarticle&number=1&artpage=1094&articID=277


It's a very good roundup of the best TCCDs modules available.