View Full Version : K8N Neo2 / 3200+ 90nm / 2x256MB BH-5 ---> DDR548 MADNESS !!!
bachus_anonym
01-23-2005, 03:27 AM
MSI K8N Neo2 Platinum - Q47353.1 0440A2 S Taiwan
A64 3200+ 90nm "Winchester" - CBBFD 0441UPCW @ 1.8v ;)
2x256MB Kingston HyperX PC3200 BH-5 @ 3.8v ;)
Thermalright XP-90 w/ YTech 120mm
Oldschool BH-5 overclocking :thumbsup:
I figured, it's never too many people that show full spectrum of benchmarks at their MAX. Not Sandra, not SuperPI 1M but more, more.....
So I decided to show my BEST OF with my current setup...
Is it very far from highest bootable - Pifast/ SuperPi - 3D bechable BH-5 overclock @ Dual Channel ???
Thank for dropping by and enjoy the show :)
CLICK for Full Size Screenshots
1. Memtest test #5 @ 270x10 6-2-2-2.0-1T
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23119&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/memtest_270x10_Low.jpg)
2. PiFast 10M and SuperPi 1M runs @ 273x10 6-2-2-2.0-1T ...
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23120&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/PiFast_42s84_274x10_Low.jpg)
3. 3DMark2001 with mild OC on my yet-unmodded X800XT PE - 274x10 6-2-2-2.0-1T
http://service.futuremark.com/compare?2k1=8386241
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23118&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/274x10_550c600m_31935_Low.jpg)
4. SuperPI 16M @ 272x10 6-2-2-2.0-1T
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23117&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/12m13s_Low.jpg)
.... more to come soon ....
kryptobs2000
01-23-2005, 03:53 AM
nice bh5, I would have though your sandra would be over 8000 though.
enzoR
01-23-2005, 08:46 AM
very nice ram uve got. 2 more mhz and 8k :D
Garrett
01-23-2005, 09:09 AM
in A64Tweaker try Max Async Latency of 6ns instead of 7ns :D
It should provide a bit more bandwidth :)
bachus_anonym
01-23-2005, 10:05 AM
nice bh5, I would have though your sandra would be over 8000 though.
Thanks! If I could jump on multi x11 with that BH-5 ( which is not gonna happen for some time :( ) then it would change Sandra score by about 150MB/s....
very nice ram uve got. 2 more mhz and 8k :D
Thanks again! Actually, 275x10 6-2-2-2.0-1T breaks 8k by 27MB/s ;) but i wanted to post Sandra ONLY if something else passes... unfortunately even SuperPi 1M can't finish :(
in A64Tweaker try Max Async Latency of 6ns instead of 7ns
It should provide a bit more bandwidth
Thanks for a tip but unfortunately, that doesn't change much :(
Supertim0r
01-23-2005, 10:35 AM
nice setup
i wish i could get some new BH-5 :slobber:
Sup3rman
01-23-2005, 10:36 AM
9 multiplier with 166 divider is the same as 11 multiplier
2277mhz
11x207 1:1=SuperPi 2M 1:27.171 - 1:27:242 Sandra int 6205-6209
9x253 /166=SuperPi 2M 1:26.421 - 1:26:734 Sandra int 6210-6217
2673mhz
11x243 1:1=SuperPi 2M 1:14.750 - 1:14:765 Sandra int 7295-7297
9x295 /166=SuperPi 2M 1:14.046 - 1:14:265 Sandra int 7249-7257
Garrett
01-23-2005, 11:31 AM
Thanks! If I could jump on multi x11 with that BH-5 ( which is not gonna happen for some time :( ) then it would change Sandra score by about 150MB/s....
Thanks again! Actually, 275x10 6-2-2-2.0-1T breaks 8k by 27MB/s ;) but i wanted to post Sandra ONLY if something else passes... unfortunately even SuperPi 1M can't finish :(
Thanks for a tip but unfortunately, that doesn't change much :(I didn't say it would do MUCH, did I? :stick: ;)
Anyway, you did gain something, right?
And if so how much?
mushk1n
01-23-2005, 11:34 AM
if only my motherboard would allow my bh-5 to do that... :( only had the memory 1 day and looking to sell it lol >.<
3.8V, thats sick!
I hate you and your RAM!! :D
Seriously, very nice result man!
Can you tell me how high your Hyper-X will go with just 3.3V?
I'm gonna burn in my Hyper-X biatch5 for a couple of nights with memtest test #5 and see how they will do at 3.3V
As of now one stick does 255 @ 3.3V, the other doesn't like anything over ~252 (yet)
Since i haven't got a booster 3.3V is the max i can give my mem, turning my 3.3V rail over 3.5V results in my PSU shutting down.
My digital MM told me it was 3.72V instead of 3.5V :mad:
Do you have a booster or are you using the Vdimm=vio mod?
Btw, you forgot to insert a Prime screen. :D
skate2snow
01-23-2005, 02:43 PM
Unfortunatly, as soon as my BH5's (able to do 255MHz stable in memtest if not higher) passes 220MHz, it is completly instable ( it is fully stable at 219.87MHz....).
BTW: I have looked EVERYWHERE, and cant find the A64Tweaker V0.50XT Beta, can someone say me where to find it? I would really like to use it, there is a setting in that version that I need....
legion
01-23-2005, 03:04 PM
Try here
LINK (http://www.techpowerup.com/articles/other/111)
Garrett
01-23-2005, 03:04 PM
Unfortunatly, as soon as my BH5's (able to do 255MHz stable in memtest if not higher) passes 220MHz, it is completly instable ( it is fully stable at 219.87MHz....).
BTW: I have looked EVERYWHERE, and cant find the A64Tweaker V0.50XT Beta, can someone say me where to find it? I would really like to use it, there is a setting in that version that I need....I had the same thing... @ 3.3v that is... pumping 3.6v through it makes it rock solid @ 260... :thumbsup:
skate2snow
01-23-2005, 04:18 PM
Not as simple as that;). The problem is in the motherboard, there is somewhere a compatibility problem with old stepping chips... That is what me and another user as found.this seems to only happen with the newest MSI K8N Neo2 too.
now, I dont want to crap Bachus Thread.
BTW: Great clocks my man!
bachus_anonym
01-23-2005, 11:29 PM
... few more tests for the collection ;)
5. PCMark02 and PCMark04 @ 272x10 6-2-2-2.0-1T
http://service.futuremark.com/compare?pcm04=2777375
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23172&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/272x10_5632_Low.jpg)
6. 3DMark03 @ 272x10 6-2-2-2.0-1T
http://service.futuremark.com/compare?2k3=3623689
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23174&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/272x10_14114_Low.jpg)
7. 3DMark05 @ 272x10 6-2-2-2.0-1T
http://service.futuremark.com/compare?3dm05=512904
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23173&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/272x10_6347_Low.jpg)
8. Another score in 3DMark2001, this time @ 273x10 6-2-2-2.0-1T
http://service.futuremark.com/compare?2k1=8387658
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23176&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/273x10_550c610m_32157_Low.jpg)
9. Aquamark3 @ 273x10 6-2-2-2.0-1T
http://arc.aquamark3.com/arc/arc_search.php?activeRunID=84258342
http://www.xtremesystems.org/forums/attachment.php?attachmentid=23175&stc=1 (http://www.clockmehigh.com/xtreme/Neo2/BEST%20OF/273x10_86851_Low.jpg)
bachus_anonym
01-24-2005, 01:38 AM
I hate you and your RAM!! :D
Seriously, very nice result man!
Can you tell me how high your Hyper-X will go with just 3.3V?
I'm gonna burn in my Hyper-X biatch5 for a couple of nights with memtest test #5 and see how they will do at 3.3V
As of now one stick does 255 @ 3.3V, the other doesn't like anything over ~252 (yet)
Since i haven't got a booster 3.3V is the max i can give my mem, turning my 3.3V rail over 3.5V results in my PSU shutting down.
My digital MM told me it was 3.72V instead of 3.5V :mad:
Do you have a booster or are you using the Vdimm=vio mod?
Btw, you forgot to insert a Prime screen. :D
... don't be hatin' Zeus :D
To be honest with you I havent really tested those sticks on Neo2 @ 3.3v - I went straight for 3.6v as this is my 24/7. At this voltage, It's "memtest and prime" stable @ DDR520.
Those KHX are great!!! But I think that many BH-5 sets of 2x256MB are capable of that as I also have 2x256MB of Mushkin LvL II that is doing exactly same clocks as my KHX ;)
As for your PSU shutting down - some of them ( including my volt-modded PCP&C 510W Deluxe ) have OVP set pretty low opposed to e.g. Fortron/Source 530W which is good for about 4.0v.
And no, I have "prime" screens but last time I tried it was with 260x10 and 265x10. I might trown them in to make that collection complete :D
Thanks a lot for all the good words :)
BeSaiD
01-24-2005, 06:48 AM
i wish i had some results like that ones...
Great rig, man!
... don't be hatin' Zeus :D
To be honest with you I havent really tested those sticks on Neo2 @ 3.3v - I went straight for 3.6v as this is my 24/7. At this voltage, It's "memtest and prime" stable @ DDR520.
Those KHX are great!!! But I think that many BH-5 sets of 2x256MB are capable of that as I also have 2x256MB of Mushkin LvL II that is doing exactly same clocks as my KHX ;)
As for your PSU shutting down - some of them ( including my volt-modded PCP&C 510W Deluxe ) have OVP set pretty low opposed to e.g. Fortron/Source 530W which is good for about 4.0v.
And no, I have "prime" screens but last time I tried it was with 260x10 and 265x10. I might trown them in to make that collection complete :D
Thanks a lot for all the good words :)
The PSU is good for 3.72V measured by digital MM, only bios tells me it's only 3.5V, so that kinda blows.
I have to have my 3.3V rail about 0.15-0.20V higher than my Vdimm but don't know if this read out by bios or by DMM.
Anyway, 252 seems now rock stable @3.3V after burning in overnight.
Gonna burn in some more, hoping to get at least 255 out of the worse stick.
Did you burn in your sticks with memtest?
And, oh, i don't really hate you.... :D