View Full Version : What are your guys results with OCZ EL 3200 Plat Rev 2?
DevilsRejection
01-22-2005, 07:53 AM
Just curious as I will get this ram soon. Prefably I would like results at 2.8V
264Mhz 2.5-3-3-7 1T at 2.6V, but thanks to my crappy claw I couldn't take it any further.
NiSMo
01-22-2005, 08:32 AM
my friends does 275 @ 2.7 volts 2.5-3-3-7....no probs, memtest stable aswell so yeh great o/cers :)
DevilsRejection
01-22-2005, 08:53 AM
this is all in dual channel and at 1T correct?
If you want 275 @ 2.5-3-3-7, might as well get the G.skill LE's. They guarantee you that at stock and 200 @ 2-2-2-5 with no more than 2.8v.
NiSMo
01-22-2005, 09:05 AM
yep his was in dual channel running 2x512 sticks at 1T.....great rams....but i would recommend gskill as its garanteed these speeds.....
DevilsRejection
01-22-2005, 09:19 AM
no im rmaing my vx and booster to get these sticks so no go on gskill idea.
Alakazam
01-22-2005, 01:41 PM
250 with the OCZ at 1T, 2.5-3-3-7 at 2.8v so far, I'm still playing with it on my new system.
benchable around 285@2.5-3-3-7 (2x512@1T) with 2.8v..but miliions of errors in Memtest. my pair sux at 2.8v
superstable at 260@2-3-3-5@1T with 3v (2x512) [451 pass in test#5]
One stick does 270 2,5-3-3-7, the other one 320 2,5-3-3-7 @3.1V 1T of course.
RebelsHaven
01-23-2005, 01:42 PM
Is anyone getting better results with increased Vdimm......? Or is there a preferred value for Vdimm...?
Is anyone getting better results with increased Vdimm......? Or is there a preferred value for Vdimm...?
thats would be me ....2.7 - 2.9 is no gud , only fly from 3v :D
DevilsRejection
01-31-2005, 05:10 PM
Well any more thoughts? Been a week since anyone replied. Anand hit 290 Mhz at 2.5-4-3-10 1T with only 2.85V, so waht gives lol.
conrad.maranan
01-31-2005, 05:45 PM
Anand hit 290 Mhz at 2.5-4-3-10 1T with only 2.85V, so waht gives lol.
I love AnandTech and the reviews on their site. Most people, however, believe that they receive cherry-picked components for their reviews. This explains why they can reach certain frequencies that many others can not. Take for example the Crucial Ballistix they did a review on. A lot of people have stated in the past that they weren't able to nail the same frequencies. ;)
jikdoc
01-31-2005, 05:53 PM
my 3200rev2 benched at 285, stable at 280. i was upgraded to 4200el's when i rma'd my 3700eb's (didn't play nice with neo2) and found the 4200el's to be a little worse than the 3200rev2 and only run stable at 275. all timings are 2.5-3-3-10. i've noticed that it takes 5-10mhz overclock in order to make up for the bandwidth loss from loosening timings from 2.5-3-3-10 to 2.5-3-4-10. i've also noticed that 2-2-2-10 timings vs. 2.5-3-3-10 timings, the difference is about 30mhz.
right now i'm having more fun with vx since there's something to look forward to with burning in. imo half the fun of ram is burning-in and wondering if tomorrow your results will be better than today's. of course, i'm waiting for dfi board to play more with vx since my neo2 has been acting funky as of late.
DevilsRejection
01-31-2005, 06:19 PM
so your saying that 2-2-2-10 @ 220 Mhz would be the same as 2.5-3-3-10 at 250 Mhz?
In what Sandra? Or just general desktop performance?
Mine do 300mhz 2,5-4-3-3-7 2,8vdimm 1T in a DFI 250gb UT. :toast:
What kinda scores do you guys get in sandra ?
4600+ is the score I get in "memory bandwith".
Is this good for a singlechannel system ?
282 memtest86 and prime95 approved @2.5-3-3-7 1t w/2.70v 2x512mb.
They seem to be ok @ 292 3.0-4-3-8 2t but what's the point?
persivore
02-02-2005, 09:53 AM
I run mine at 255 2.5,3,3,10 1T on 2.6v in my DFI UI. Running either of the sticks on their own tho i'm memtest stable up to 275 with the same timings and volts. I think my boards maxed tho.
DevilsRejection
02-02-2005, 10:06 AM
282 memtest86 and prime95 approved @2.5-3-3-7 1t w/2.70v 2x512mb.
They seem to be ok @ 292 3.0-4-3-8 2t but what's the point?
282 is wicked, if i hit 278 then i will be happy because 9x278 = 2.5Ghz
sevenka
02-02-2005, 01:59 PM
// link removed.
DevilsRejection
02-02-2005, 05:25 PM
wat about the highest 2-2-2 timing with this ram? anyone hit 230?
Shawnister
02-03-2005, 12:06 AM
Ive seen 270 2-2-2-8 at 3.3V on a NF2 board. Typically though this ram is not the biggest fan or Volts. But this stuff is awsome for incredibly high frequencies. at 2.8-2.9v u cld prolly get around 300mhz on the current week of TCCD 2.5-3-3 might do it,
otherwise 2.5-4-4 will no problem.
Kudos
MaxxxRacer
02-03-2005, 12:20 AM
Devil: I get 275 (limited by ondie controller) 2.5-3-3-7 2.7 volts... and I found at 225 i can do 2-2-2-5/6 at 2.9 volts. Havnt tried lower volts at the 225.. When i get a new a64 i will try more vdim and see what I can get.
stu_allen
02-07-2005, 11:12 AM
Hmm, no more than 235-240 on the two sets i have. This is on the asus a8nsli so may be board related. Have tried all sorts of timings, settled in the end on 230 2,3,2,8.
wat about the highest 2-2-2 timing with this ram? anyone hit 230?
225@2-2-2-5 1T@3v is my best so far :p 2x512 of course
Mine do 300mhz 2,5-4-3-3-7 2,8vdimm 1T in a DFI 250gb UT. :toast:
What kinda scores do you guys get in sandra ?
4600+ is the score I get in "memory bandwith".
Is this good for a singlechannel system ?
what the rest of the timming? is that Prime and Memtest ERROR FREE? I can't get mine above 260 :(
pudds
02-09-2005, 06:56 PM
Mine do 2.5-4-3-7 2.9V @ 315mhz
zeebs
02-09-2005, 07:00 PM
My 1gb kit does 265fsb with a 10x multi at 2.7vdimm. 2.5-3-3-7 1t. Not too bad.
1 stick with 1T command and 2.9v (Memtest and Prime stable :cool: )
http://img126.exs.cx/img126/6144/3005127kr.th.jpg (http://img126.exs.cx/my.php?loc=img126&image=3005127kr.jpg)
DavidHull
02-10-2005, 08:35 PM
Current Prime stable speed is 2.5-4-3-7 at 300mhz with 2.9 volts (2 x 512). They will, I think, go faster, but my Winnie maxes out at just above 2400mhz (x8 multi), so I'll keep it here for now. I might try playing with the timings a bit to increase bandwidth. The Mobo is a DFI SLI-DR. They maxed out at 275-280 on my Neo2 Plat.