PDA

View Full Version : Transcend Jetram PC3200



scorp
01-18-2005, 05:45 AM
I was just courious if anyone around here has tried such RAM (especially with Athlon64 systems).

The RAM seems to be quite interesting :
OCZ Memtest86 1.0 passed an 18hours complete test on it at 460 @ 2.5-3-3-7 with only 2.7v (in dual-channel mode). However it will fail prime95 even at 400Mhz 3-4-4-8 (in dual-channel mode, in single channel mode it works perfectly - tested both modules for 14 hours each). To make prime95 run stable I had to use a 5:3 divider (the CPU is at stock speed). Not sure yet if it's a Winnie problem or it's the RAM.

scorp
01-26-2005, 06:48 AM
Come on :D .. nobody ever tried such ram on an A64 ?

johnny_loo
10-04-2005, 06:13 PM
i have test it = 2.7V @ DDR460 @ 2.5-3-3-7
same result with u, but i dun get any error when i prime with SP2004 by Johnny Lee.

johnny_loo
10-04-2005, 11:20 PM
when i try loose the timing or voltage also stuck at DDR460
for my point... its worth for that speed ;p