[Bandwidth WR]9391mb/s;DDR 686 2.5-4-3-7

[Onepagebook]

As title, DDR686 2.5-4-3-7 :banana: :banana: :banana:
PLEASE, don't ask me what the motherboard is:D

http://img67.exs.cx/img67/1766/9391bwla6uw.jpg

**update:
just a small improvement: :D , now more close to 9.5k mb/s :banana: :banana: :banana:

http://img12.exs.cx/img12/2432/ddr691bw94817fs.jpg

FYI, Took from Digital camera:

http://img12.exs.cx/img12/9386/9481dc6zn.jpg

[bh2k]

ummm...wow what motherboard ;):D

[AMDnewbie]

I don't want know the motherboard but i want ur rams....;):D

[madgamer]

Tons of volts to get those timings? That is some sick bandwith.

[SuperDude]

its g.skill c'mon :D

[jjcom]

yeah, great job there OPB...mmm...I've got a guess as to what board that is...

keep it up :D

jjcom

[shadowing]

WOW!! I'm not going to ask what mobo. I think i know what it is. Great job!!

[Onepagebook]

tons of volt?:) ...no no
what'd you think TCCD can bear that?:D

only 2.9v;)

[Cpt Twitchy]

Very nice numbers you have there. Have people been reaching that high in sandra lately or are you just that 1337? :YIPPIE:

[Playful_Buffalo]

i am pretty sure i know what board you are using ;)

nice job

[Nazaar]

those are amazing results...


at 2.9V :banana:

[confuzzedintel]

:slobber: onepage you have done it again wow thats all i can say is wow awsome score will you be my hero ? :p:

[Onepagebook]

Thanks all you guys!! That's not what I am awesome, you guys know who I am talking about!:D

BTW, what does "1337" mean?:D

[googles]

nice one opb!!...1337=leet, as in elite i think...

[BerT]

a small gamerlanguage that has developped through the years to distinguish the cool from the not so cool gamers :D

[jikdoc]

opb, both you and oskar are 1337. that's an insane memory/mobo/cpu combo there. i'm afraid to see what you'll be able to do when chilly1 cascade comes.

[RollerX]

1337 means leet as in elite.....

btw, are those the LA's?

[Zeus]

Just sick! :eek: :slobber:
Congrats on the WR. :toast:

These are LA sticks i assume?

[GazC]

I think we all know what mobo that is ;)

[enzoR]

ofcourse we do! and its so hot we dont dare say what it is! :p:

[choseone214]

Lobby High and Car High IN 3dmark 2k1 "PLEASE" ;) nice stuff as always my man. :)

[kakaroto]

you are powerfull OPB!

Those are 2x256 PC4800 LA kit?

[Bennah]

Broke your old record by just under 400mb/s... what a difference a mobo can make :D

Great work... props to you :toast:

[MaRtIe]

nice one OPB... ime only getting 7500MBps.. but then thats at 288mhz :D

so nice work!

[madgamer]

Whats even more amazing is that you dont even have to volt mod or add a booster or anything to hit 2.9 volts. Those are some amazing timings for that speed as well. In another thread I was impressed to see 3-5-5-10 timings at 350mhz, but this blows that away so bad its funny.

[Onepagebook]

1.thanks for those friends who explain what the 1337 is!:D
2.This is LA kit yes!
3.I will try 2.5-4-4-8 after got my cascade back:)

[Mag Master 21]

dear god.. this makes me want to switch setups..

I hate this forum.. :(

[HiJon89]

I think we all know what mobo that is ;)
Does anyone want to provide a hint for those of us that don't somehow know what motherboard it is? Just a guess, is it the DFI SLI board?

[DudeMiester]

Almost certainly imho.

[Ref]

That's an impressive motherboard ! This is a MUST for any A64 OCer !!!
:slobber:

[Bennah]

Does anyone want to provide a hint for those of us that don't somehow know what motherboard it is? Just a guess, is it the DFI SLI board?

Your not getting warm, your on fire ;)

[k|ngp|n]

Nice clocks OPB...
Run some 3dmark01 man.

I would love to see a good compare between 265x13 w/ bh5 tight as possible and 345x10 w/tccd and your timings in 3d01'...
I'm sure you'll do this when your cascade gets back :P...right?

[jjcom]

I'm thinking this as well DFI LP Ultra or SLi. Not sure which tho. But then again Abit could have done something lol

jjcom

[bachus_anonym]

Onepagebook,

what's the MAX stable for 3D and some SuperPi 16M or 32M action? if Prime95 is just to much to ask for...?

that could be VERY valuable piece of information, please :)

[Onepagebook]

Onepagebook,

what's the MAX stable for 3D and some SuperPi 16M or 32M action? if Prime95 is just to much to ask for...?

that could be VERY valuable piece of information, please :)
"DDR620(512x2) can pass all 3d marks,prime95 3 hours, but not even 1m super pi"---> this is not what I did ( a vip , you know who he is:D)

I will try all the tests you mentioned about.

[bachus_anonym]

"DDR620(512x2) can pass all 3d marks,prime95 3 hours, but not even 1m super pi"---> this is not what I did ( a vip , you know who he is:D)

I will try all the tests you mentioned about.
if that's 7-3-3-2.5-1T then it's great for 2x512MB!!!
do you think that those PC4800 LA 2x256MB that you're testing here are capable of killing 2x256MB BH-5 @ DDR540 ???

EDIT: i know you could throw in that kind of test here: 2x256MB of your magic BH-5 6-2-2-2.0-1T vs 2x256MB PC4800 LA 7-3-3-2.5-1T - MAX clocks benchable or stable for 24/7 use....

[HARDCORECLOCKER]

:D Hey dude - congrats, nice bandwith, we hope that all DFI NF4 will be able to do this !!!

I could bet we will see 10K Sandra from You before summer.

The max I got so far with the crappy A-DATA was 8.8K - hope for 9K with the G.SKILL LA coming next week.

It also would be nice to get 24sec SuperPI 1M but I think there is no go on only a stock single phase.

Keep us informed !!!

:toast:

[jjcom]

Very possilbe...very possilbe. Gskill makes some real nice RAM so I wouldn't say its out of the question

jjcom

[MaxxxRacer]

wow, those are some amazing results you got opb.. those are probably the singe best tccd sticks in existence.

[kakaroto]

OPB, I want Dual Channel too, MSI better hurry!

http://www.xs4all.nl/~famchow/Memory/Gskill%20PC4800/DDR680_sandra.JPG

:D

[Onepagebook]

OPB, I want Dual Channel too, MSI better hurry!

http://www.xs4all.nl/~famchow/Memory/Gskill%20PC4800/DDR680_sandra.JPG

:D


That's one damn good resuly too..
try Dram strength for 7, and go higher ;)

[EnJoY]

You can only use up to level 4 for dimm driving strength on the DFI LP UT.

[Onepagebook]

You can only use up to level 4 for dimm driving strength on the DFI LP UT.


wow..
maybe try 3

[kakaroto]

gonna try that, This is with strength 1.

Btw.. 3.1V, they like it :)

[Onepagebook]

gonna try that, This is with strength 1.


When you have single side of Ram, use Dram strength as odd number. ;)

[EnJoY]

My Corsair BH5 prefers 1 over 2 very slightly and it's dual sided (2x512MB).

[Onepagebook]

**update:
just a small improvement: :D , now more close to 9.5k , plase see first page!mb/s :banana: :banana: :banana:

[EnJoY]

Wow! Very nice! But OPB, when and where can we find gig kits of the new PC4800LA?

[S&M]

i'm joining EnJoY's question ...

[Onepagebook]

I doubt that's gonne be that fast!:(

[S&M]

still, i think many ppl are waiting for those 1gig kits ...
can ya at least say - weeks/months ?


I doubt that's gonne be that fast!:(

[bachus_anonym]

can you actually get those PC4800 in a 2x256 Dual Kit yet? Does it really matter if they come in a kit? It looks like 2x256MB are not in retail channels yet - Digi4me and Newegg don't have them yet but they have sinle 256MB sticks....

Do you have any info on availability of those 2x256MB kits in US ?

EDIT: i had to edit that post for clarity :)

[S&M]

is that what you r looking for ?

http://www.newegg.com/app/ViewProductDesc.asp?description=20-231-007&depa=0

check the pics - it's saying pc4800 ...

[bachus_anonym]

thanx S&M - that lack of "PC4800" in a description made me slightly confused.... thanx

[EnJoY]

I want to be able to buy atleast two 512MB sticks separately even if buying them in a kit will be far off. Although I imagine the availability of both of those items are intertwined. Can we have a date no matter bewildering it may be OPB? Weeks, Months, 2006?

[S&M]

np at all - that's make us two confused ppl ...

I was wondering about 'em a lot .... till I bothered to check the pics ...

[Onepagebook]

Actually , the PC4800 LA 1G kit is rated as DDR600 "2T". That's why I always recommand LE;)

[GazC]

Actually , the PC4800 LA 1G kit is rated as DDR600 "2T". That's why I always recommand LE;)

I ended up ordering a gig of LC (the bloody day before LE and LA became available)

What can I expect to get from it on an MSI K8N neo2 and an FX-55 and at what voltage?

Sorry for the O/T question, I'm just worried that I've picked the runt of the litter :(

[Onepagebook]

I ended up ordering a gig of LC (the bloody day before LE and LA became available)

What can I expect to get from it on an MSI K8N neo2 and an FX-55 and at what voltage?

Sorry for the O/T question, I'm just worried that I've picked the runt of the litter :(


LC is like DDR550 2.5-4-4-8
I had that experience run it like DDR575 2.5-4-3-6 on Neo2 fx55
BUT, be sure you got good power and good neo2.


OPB

[GazC]

I always make the wrong choice, I was hoping to have got into the 280s with 2.5-3-3-7. I have a PCP&C510 so I have a good power source. It's typical that the store would have LE and LA available after I order.

What is the best voltage for getting high clocks with LC anyway?

[Onepagebook]

I always make the wrong choice, I was hoping to have got into the 280s with 2.5-3-3-7. I have a PCP&C510 so I have a good power source. It's typical that the store would have LE and LA available after I order.

What is the best voltage for getting high clocks with LC anyway?


It depends, I would say if you wanna run 280 for sure, I would give around 2.8 but I am not sure ! Some of my friends they show me like 2,7 for doing DDR570 passing memtest std mode for 3 hours
You gotta try!
PM me after you got the ram and question stuff.


OPB

[GazC]

It depends, I would say if you wanna run 280 for sure, I would give around 2.8 but I am not sure ! Some of my friends they show me like 2,7 for doing DDR570 passing memtest std mode for 3 hours
You gotta try!
PM me after you got the ram and question stuff.


OPB

okay, thanks.

[Zanr Zij]

??? LA is the best choice ? :slobber: U recommend LE but U do better with LA ?

do close to 9k5 need cascade ? Thx

[existz]

:slobber: very nice , makes me want to cry

[Playful_Buffalo]

whats better for gaming....high bandwidth or tight timings?

[kristos]

Actually , the PC4800 LA 1G kit is rated as DDR600 "2T". That's why I always recommand LE;) I checked Gskill global site, I don't see PC4800 1GBLE ?

Only pc4800 1 GBLA and 1GBLB



I have a set of PC4800 1GBLA and the shop I ordered from told me they were supposed to do ddr600 @ 1T :confused:



oh, and congratz on your world record, truly amazing :toast:

not that I'd expect anything less from ya :p

[Onepagebook]

I checked Gskill global site, I don't see PC4800 1GBLE ?

Only pc4800 1 GBLA and 1GBLB



I have a set of PC4800 1GBLA and the shop I ordered from told me they were supposed to do ddr600 @ 1T :confused:



oh, and congratz on your world record, truly amazing :toast:

not that I'd expect anything less from ya :p

Dear Kristos:

There is some misunderstanding here !
LE means DDR550 2.5-3-3-7
There is no LE with PC4800

LA 1gb only good for 2t DDR600

But I tell you what, my experience on NF4, I can easily do DDR600 "1t" with LE 1g kit
If you have futher question need help, please PM me, I am more than happy to help you!;)

[Skip]

i sent you a pm yesterday OPB about a gig kit of LE. just wanted to know if my results were normal.

how many sticks of ram did you go through before you found the kit that got that bandwidth? :toast:

[Onepagebook]

i sent you a pm yesterday OPB about a gig kit of LE. just wanted to know if my results were normal.

how many sticks of ram did you go through before you found the kit that got that bandwidth? :toast:


I only have 1 LA kit :)

OPB

[Skip]

sheesh, i thought you got lucky with an LA kit, that LA must be some good stuff. Should probably pick up some of that for when i get my waterchiller finished.

[gocchin]

Those are great results OPB! I've got 2x256 LE and I can't get over 250 2.5-3-3-7 on my Neo2 + FX-55 combo... which is strange cause I can hit 300 2.5-4-4-8 with them :( What am I doing wrong!?!?

[FallenAngel]

whats better for gaming....high bandwidth or tight timings?
I second that too, what's best anyway? I really need to know too, before jumping in the wagon...

[STEvil]

do you mean high unbuffered bandwidth or high buffered bandwidth?

[FallenAngel]

@stevil
wichever be best for gaming

@OPB
it's always a pleasure to read your threads

[madgamer]

http://www.xtremesystems.org/forums/showthread.php?t=48634 Check that thread out. from looking at that I would be inclined to say that speed is greater than latency when it comes to gaming. The latency frequently only seems to have a marginal effect, which when benching or something might be make or break, but for regular everyday usage would be almost un-noticable. I dont know if he has done the frequency comparo at different timings yet (seems it hasn't been bumped in a while), but from my experience (but no set in stone test #'s) mem frequency seems to have a nice bump in performance. I guess I'm saying that, while I dont know 100% for sure, frequency would be my guess but wait on one of these guys that does know before going one way or the other.

[D_o_S]

Incredible memory bandwith you got there, OPB. Where can I buy G.Skill close to Czech Republic (Germany, Poland, etc.)?

[j0j0]

www.oc-wear.de

[agor]

oc-wear didnt have them in stock for like 3 weeks now. i phoned them today and they said my package will be shipped tomorrow or the day after tomorrow (4400F1LE). so if you want them you should order fast

[olfen]

http://www.pc-memory-upgrade.co.uk/ have them in stock

[D_o_S]

Thanks!

[Kobalt]

Nice man...drool im still on socket A :-D

Does anyone know what the max 2x256 bh-5 would do at say around 4 volts? And with a fan right above them, how long would it last at that voltage?

Time for 10k in sandra! You gotta work harder ;). DDR 700 goodness...

[Onepagebook]

Nice man...drool im still on socket A :-D

Does anyone know what the max 2x256 bh-5 would do at say around 4 volts? And with a fan right above them, how long would it last at that voltage?

Time for 10k in sandra! You gotta work harder ;). DDR 700 goodness...


I would say around 285 for benchable, 280 stable for run 3d mark stuff.
Have not tried prime95 or memtest on it yet. :p:

OPB

[perry_78]

Ok. Now i'm confused.

So you're recommending LE, while you get better results with LA?

Makes little sense. Just got to wait to see the results on my LA when my board drops in ;) Im hoping DDR600 1T...

[Kobalt]

He is recommending LE for 1gb kits because the LA 1gb kits are DDR600 @ 2t. The LE 1gb kits are DDR600 @ 1t.

[FallenAngel]

And you hardly will find LA in 2x512

[perry_78]

And you hardly will find LA in 2x512

i got mine :rolleyes:

So technically speaking LE is better, while LA will obtain higher results? Havent seen LE do DDR680 yet :confused:

[Onepagebook]

He is recommending LE for 1gb kits because the LA 1gb kits are DDR600 @ 2t. The LE 1gb kits are DDR600 @ 1t.


LE is not rated at DDR600 1t in general !
However, from my NF4 based motherboard, I can definitely reach that high. :D

[perry_78]

SO one last question (while i congratulare your result and GET THOSE 10K!).

Would you personally recommend LA or LE kits?

[Torin]

LA 2x256mb for benching
LE 2x512mb for gaming

[FallenAngel]

i got mine :rolleyes:

So technically speaking LE is better, while LA will obtain higher results? Havent seen LE do DDR680 yet :confused:
Where did you find yours at 2x512? I found them but never in stock but 2x256 yes

[EnJoY]

oc-ware.de is where he got em.

[FallenAngel]

thanks

[HARDCORECLOCKER]

And you hardly will find LA in 2x512

:D A little far from US but no problem for EU - here it is in stock:

2 x 512 4800LA (http://www.oc-wear.de/assets/own/safedataframe.html?fsrc=http://www.oc-wear.de/)

:toast:

[S&M]

can someone give us a hint what those LA 1gb kits are able ?

[HARDCORECLOCKER]

can someone give us a hint what those LA 1gb kits are able ?

:D Get mine this week - but it's 2 x 256. Need the highest clockable one.

Will post if they're a success - if not I have to look seriously for OPB's residence...... :slapass:

:toast:

[ocmyface]

can someone give us a hint what those LA 1gb kits are able ?

http://www.xtremesystems.org/forums/showthread.php?t=49234

ta-da!

[seldomsean]

I doubt that's gonne be that fast!:(

You have got that set up "Dialed In"

I don't know what else to say... :banana4:

[kiwi]

sweet :cool:

So the next step is 10K :D

[Bhairav]

OPB, nice stuff! One question.. anywhere in India I can pick some GSkill RAM up?

[Onepagebook]

OPB, nice stuff! One question.. anywhere in India I can pick some GSkill RAM up?


I am not positive about reseller in your coutry though, but I will ask HQ see if they have better location for you :toast:
PMed


OPB

[marius7]

Can u ask about Romania too ? :confused: I would die for one pair of LA's :)

[perry_78]

I can't seem to find any shipping to Romania. Looks like you need someone in a EU country and then ship it to you :(

[c7775]

UH SORRY but... does it play Solitaire ok with those settings ??? :D

[perry_78]

Everyone wants LA now. I just bloody hope GSkill isnt chery picking those modules, if they dont do DDR600 1T.....

Lets say i'll be pissed.

[bias_hjorth]

The words is that it depends a lot on the memory controller. But I know that cant be the thing is my case so I guess the boards equal dependable.

[marius7]

I can't seem to find any shipping to Romania. Looks like you need someone in a EU country and then ship it to you :(


Can u find out what country (store) from EU is shipping to Romania ?

[FallenAngel]

I think what Juliette wanted to say is that you must find someone, a friend in EU that actually will buy it, and then ship it to you... I think...

[perry_78]

Correct FA, sorry for the muddle :)

you dont have a diplomat friend by any chance?

[marius7]

Correct FA, sorry for the muddle :)

you dont have a diplomat friend by any chance?
Don't think so :brick: