View Full Version : DFI Nforce4 IN Canada - Preorder now
Hello Everyone,
Just thought I would let all my fellow Canadians know that DFI S939 can be pre-ordered in Canada.
DFI LANPARTY UT NF4 ULTRA-D MOTHERBOARD ATX S939 NFORCE4 ULTRA (http://www.ncix.com/products/index.php?sku=13825&vpn=LANPARTY-UT-NF4-ULTRA-D&manufacture=DFI) this one is retailing for $190.40 Canadian
DFI LANPARTY NF4 SLI-DR MOTHERBOARD ATX S939 NFORCE4 (http://www.ncix.com/products/index.php?sku=13826&vpn=LANPARTY-NF4-SLI-DR&manufacture=DFI) $240 Canadian
Pretty reasonably priced compared to what I have seen so far.. as well they say they will begin shipping on the 31'st of Janurary *Crosses Fingers*
I am gonna order the Ultra-D as I do not think I will ever use the SLI. Does anyone know if the overclocking experience will vary greatly between the SLI and the non SLI versions?
I will try to keep this thread updated with all the retail locations for Canada.
cantankerous
01-14-2005, 06:41 AM
Very good news. Thanks a bunch, I was worried about where I was going to track one down.
According to your info and those links it looks like NCIX is already raising the price. 240-$249?
G0DZILLA
01-14-2005, 07:23 AM
NIX is very good at that :) , good to hear tho I am looking for PCIe options atm.
idleuser
01-14-2005, 09:02 AM
Nevermind I guess they do :) edit* just preorder a nforce 4 non sli.
Yes they do ship to the US however don't go stealing all of our boards :)
https://secure.ncix.com/customercare/#international
Anyone know what to expect between the different board versions in terms over overclockability? Should we expect the same general overclocking performance from all the boards?
trans am
01-14-2005, 10:23 AM
Awesome! NCIX has an american site where you can order the ultra-d for $155.43 iT WAS $170 After shipping, I guess I could cancel if it comes out in the US first, but this is the sfest way to do it. I was expecting the board to be a lot more. Thanks aver! :toast:
http://www.us.ncix.com/products/index.php?sku=13825&vpn=LANPARTY-UT-NF4-ULTRA-D&manufacture=DFI
G0DZILLA
01-14-2005, 10:29 AM
If you are lucky lol, seems like the supply demand is higher down there (of course) and the raping on the wallets begins.
jikdoc
01-14-2005, 12:00 PM
i can't wait to get rid of this msi neo2. 1st on line for sli version! 229 shipped to nyc
cantankerous
01-14-2005, 01:14 PM
everyone is complaining about their NEO 2 etc boards. I'm still using NF2.. imagine what I'm going through!
G0DZILLA
01-14-2005, 01:41 PM
Hahah :( I am on a 900 mhz duron from compaq ohhhh the sadness :( I am now just waiting on the new PCIe boards to take the plunge again, if them ever start comming out in quantity dammit.
smatty_mcfly
01-14-2005, 03:19 PM
Thx for the nice find Aver. I just bought 3 SLI-DR! Only 2 more weeks to wait. :)
Looks like I better order mine tomorrow... hah
Do you guys think their will be a large difference between the SLI and the non sli versions in terms of overclocking? I have been reading One Page Books thread and I am impressed by the FSB he beens able to obtain.. but will the non sli version be as good?
gocchin
01-14-2005, 04:02 PM
Hello Everyone,
Just thought I would let all my fellow Canadians know that DFI S939 can be pre-ordered in Canada.
DFI LANPARTY UT NF4 ULTRA-D MOTHERBOARD ATX S939 NFORCE4 ULTRA (http://www.ncix.com/products/index.php?sku=13825&vpn=LANPARTY-UT-NF4-ULTRA-D&manufacture=DFI) this one is retailing for $190.40 Canadian
DFI LANPARTY NF4 SLI-DR MOTHERBOARD ATX S939 NFORCE4 (http://www.ncix.com/products/index.php?sku=13826&vpn=LANPARTY-NF4-SLI-DR&manufacture=DFI) $240 Canadian
Pretty reasonably priced compared to what I have seen so far.. as well they say they will begin shipping on the 31'st of Janurary *Crosses Fingers*
I am gonna order the Ultra-D as I do not think I will ever use the SLI. Does anyone know if the overclocking experience will vary greatly between the SLI and the non SLI versions?
I will try to keep this thread updated with all the retail locations for Canada.
They must have raised their price on the SLI board... it's now 269.08.. and sometimes NCIX's preorders can take a while.....
MarilynMX
01-14-2005, 04:14 PM
I'd rather wait till they have em in stock. notice "prices are subject to change"
smatty_mcfly
01-14-2005, 04:15 PM
Price still comes up as $249 for me.
gocchin
01-14-2005, 04:44 PM
Price still comes up as $249 for me.
It does for me now too but a few minutes ago it was 269.08 as in the screen cap.... weird... maybe the price is flucuating cause he did say 240 above ;)
gocchin
01-15-2005, 08:48 AM
Haha now the price comes up 259... it really is fluctuating....
grey_
01-15-2005, 10:18 PM
Awesome! The DFI LANPARTY UT NF4 ULTRA-D MOTHERBOARD ATX S939 NFORCE4 ULTRA is NON-SLI right? I don't want SLI.
I'm not interested in SLI, but all the good mobos have it and they're really expensive :(
trans am
01-15-2005, 10:34 PM
Awesome! The DFI LANPARTY UT NF4 ULTRA-D MOTHERBOARD ATX S939 NFORCE4 ULTRA is NON-SLI right? I don't want SLI.
I'm not interested in SLI, but all the good mobos have it and they're really expensive :(
ultra d is non-sli ver.
about the Ultra, can this still run SLI if need be? nvidia pressured MSI out of doing the DBS, but what about DFI?
trans am
01-15-2005, 11:17 PM
I don't think it's suppose to, but anything's possible in this day and age.
eh, over the course of about the past 2 months i've been gradually getting turned off by SLI. i think i'll just get the ultra regardless. SLI imo is going to be a max 2 generation deal anyways, might as well save the 50-75$ and get the ultra.
the ultra at ncix is 155 USD. thats awesome.
Charloz24
01-17-2005, 09:36 PM
The ETA is now 11-02-05 :sick:
The ETA is now 11-02-05 :sick:
Reading comprehension > you
02-11-05
So a week and a half later than the date of 1/30/05 that was up earlier today.
idleuser
01-17-2005, 11:57 PM
hehe i wouldn't be surprised if only 1/2 of the shipment will get fufilled
trans am
01-18-2005, 09:55 AM
I placed my order from here just in case the us stores didn't get them in time. You can always cancel if places like newegg or gameve get them first. this is what I call playing it safe.
Charloz24
01-22-2005, 10:32 PM
Ok seems like the ETA date came back to 31-01-05 !
MarilynMX
01-25-2005, 03:15 AM
here it changes again~~2/05
gundamit
01-26-2005, 03:18 AM
I guess this explains the difference in price between DFI's NF4 Ultra and SLI versions of this mobo. (http://www.theinquirer.net/?article=20863) Maybe DFI was trying to save our wallets when they added the 16x slot on the Ultra so we could have SLI on the cheap. No doubt DFI was not amused. I wonder if they'll stick it to DFI and others who try to get around the $50 licensing fee. Almost makes me want to kill my pre-order on the SLI-DR I have with NCIX. Almost ... ;)
matt9669
02-01-2005, 08:18 PM
Hey guys - I got a order status update from NCIX - it didn't say they'd shipped anything, but this was in the update:
Product Availability Availability Verified
Plus, they charged my CC, verified my address etc. - anyone who has past history w/ NCIX, do you think this means they ship tomorrow?
gundamit
02-02-2005, 03:49 AM
Hey guys - I got a order status update from NCIX - it didn't say they'd shipped anything, but this was in the update: Yup. Me too.
:banana: Never ordered from them before but I'm hoping I see a tracking number in my e-mail today. :) Now I just need to find a processor that doesn't have a problem with sub zero temps (939 Newcastsle?) and have ATI ship my pre-ordered x800XL (waiting for sanity to take hold of market prices on 6800GTs) ASAP.
matt9669
02-02-2005, 06:23 AM
Thought the Winnie cold bug was largely resolved . . . if not, guess it's Newcastle for me too :banana4:
matt9669
02-02-2005, 11:28 AM
Update on NCIX preorders -
Talked to Order Status on the phone. The shipment of SLI-DR's is coming in Friday to NCIX in Canada and will probably ship out Monday. So, no board this week :(
gundamit
02-04-2005, 02:32 AM
The shipment of SLI-DR's is coming in Friday to NCIX in Canada and will probably ship out Monday. So, no board this week :(I'm almost relieved since it gives me more time to find a video card. The idea of me looking at the mobo in front of me without at least a x800XL or 6800GT .... better not to contemplate how that would play out.
matt9669
02-04-2005, 02:55 AM
I'm almost relieved since it gives me more time to find a video card. The idea of me looking at the mobo in front of me without at least a x800XL or 6800GT .... better not to contemplate how that would play out.I'm in the same boat, but with choosing a processor - not sure if a Winnie will work under phase change on these boards, and I'm not sure I want my wallet to suffer the weight of the FX-55 ;)
gundamit
02-04-2005, 03:27 AM
I'm in the same boat, but with choosing a processor - not sure if a Winnie will work under phase change on these boards, and I'm not sure I want my wallet to suffer the weight of the FX-55 ;) I was thinking about going with A Newcastle 939 because of things I had heard about Winchester problems with sub-zero boots, but someone told me that it had been fixed in the DFI NF4 bios. I'm going with a 3500+ Winchester, but I'm going to pull the trigger on the purchase at the last moment possible in hopes that maybe Venice will appear suddenly. :p:
matt9669
02-04-2005, 03:31 AM
@gun - do you know when your SLI-DR is coming in? I don't know of anyone who has experience with Winchesters at sub-zero temps on these boards - please PM me as soon as you test it, it would really help. :bounces:
Also, got this thread running: http://www.xtremesystems.org/forums/showthread.php?t=52090
gundamit
02-06-2005, 01:17 AM
Got my shipping notification and tracking number. Ordered a 6800GT PCI-E. Just need to order the CPU now. Hopefully things will be coming together next weekend. I'll post in the thread regarding sub-zero and the Winnies if I don't chicken out and get a Newcastle. :p:
gundamit
02-07-2005, 03:49 PM
Wow. Came today. :slobber: Still waiting on a shipping notification for my 6800GT from Monarch and have to order my CPU tomorrow in order to have any chance of working on my new project in time for the weekend. :)
Put my LPUT back on water and keeping my fingers crossed that the Winnie I won't have a problem with my Mach II. Might start with a Thermalright 948u (air) to keep thinks simple at the start.