problam with MEMTEST

[amisha]

i wat nt to chack my memory VIA MEMTEST but in some cases the software freezes .....
like in this case :
2.5-4-4-7 520MHZ 2.85V
A DATA PC4000

why is this happen ?

[Spanners]

Try increasing Vagp voltage or maybe Vcore . Does it freeze on a the same test
every time?, as far as I remember test 4 usually indicates a cpu issue test 5-8 are usually timings/latency and Vmem related . Some boards need increased Vagp to run with stabilty at high fsb (260?) . I'm no Guru but give it a go and good luck :) edit : Do you have any stability problems in Windows or using other testing software prime95 , superpi 32m ??

[amisha]

in th 5th. test it freezes
should I lossen the timings ?

can be any thing be damaged by increasing the Vagp ( in my bios it is written as " AGP voltage VDDQ " is it the same ?) ?

[enzoR]

ive had my agp all the way up untill 2v and it helped stability alot when running high fsb with tight timeings but i think in your case it is just your ram maxing out. do a vdimm mod.

[amisha]

i did already vdimm mod i just need to calibrate the pot ........
i will try up to 3V


edit :
when i tell that the program freezes i mean that the clock spots counting but the "+" @ the left corner of the screen still blinks and alos the little underline under the L2