Chilly1 Ln2/DI container [Archive] - XtremeSystems Forums

chilly1

01-02-2005, 12:25 AM

Mounting isn't done yet but is done through a 1/2 inch thick PVC ring which is supported by the copper ridge on the pipe. The container is around 14 inches tall and will have 3/4 inch closed cell neoprene insulation. The contact block is a chilly1 spiral block like the ones inside my phasechange evaporators. I do have GPU coolers with the same dimentions but these have my new mounting system with a poly ring around the end of the block for mounting.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21956&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21947

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21948&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21949&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21950&stc=1

chilly1

01-02-2005, 12:26 AM

Additional pics

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21952&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21953&stc=1

choseone214

01-02-2005, 02:34 AM

NOT BAD!!

One question though. Why not go with a thicker pipe for more surface area?
Dryice is so powerful in itself, but it is so much stronger if more comes in contact with the base/floor of the unit at once. That same design in a 2.5in-3in unit would be stunning.

Kingpin had awsome results with these units guys 3470mhz+ on his fx55 so they deff do the job nicely :)..

detonator

01-02-2005, 03:00 AM

great job like alwasy! so gled 1 of them is mine :D

Pejsen

01-02-2005, 07:37 AM

Uhhhmmm makes me happy to see :D

k|ngp|n

01-02-2005, 08:49 AM

OMG!!! Chilly the gpu unit is so nice....the container should be perfect distance from card. You did it perfect. :toast: That is exactly what was needed.

I should have a really nice 2 piece clamshell done for the card and that unit should fit it perfect. I'm using hilti grip filler foam to make it.

twilius_basic

01-02-2005, 09:06 AM

Oh those are SO COOL :slobber:

I'm lusting away at those :D Maybe will buy one from ya someday. Talk about an easy way to do some damage...

k|ngp|n

01-02-2005, 09:43 AM

Oh those are SO COOL :slobber:

I'm lusting away at those :D Maybe will buy one from ya someday. Talk about an easy way to do some damage...

For sure. Poor mans cascade all the way. Very good performance in cooling /$$ ratio :P

choseone214

01-02-2005, 09:54 AM

For sure. Poor mans cascade all the way.
I still remember the days Dryice was comapred to r507 single stage. :banana4:

k|ngp|n

01-02-2005, 10:02 AM

I still remember the days Dryice was comapred to r507 single stage. :banana4:

LOL no kidding....DI kills r507 :banana4:

I wonder if this gpu unit will keep the card components and mem as cool as the other containers w/ large surface area bases? Probably not, but this is where I have been running into cold issues on my cards and it's been frustrating. You really have to work on your condensation prevention more with the wider bases to get them to work right, or else it all goes berserk. On his unit, the cold is more isolated to just gpu area. It will be interesting to test and see the differences in overclocking between the two.

chilly1

01-02-2005, 11:09 AM

With the low wattages of the video card we have found that the rest of teh components still freeze up even with cooling only going through the GPU only. These blocks are capable of 500 watts with Dryice, can't imagine this on Ln2 But it would be nice to see...

Jvlk

01-02-2005, 02:34 PM

Chilly..check you private message box at Teampuss, sorry for the late reaction but I ran into some probs...Hope you understand.

9mmCensor

01-02-2005, 02:42 PM

What type of mounting setup you got with those?

chilly1

01-02-2005, 05:44 PM

I am cutting the mounts this week... I will post them when done.

GomerPyle

01-03-2005, 03:25 AM

1 cpu and 2 gpu for LN2 testing would be awesome :slobber: :)
Nice work!!!

ashapirox

01-03-2005, 01:42 PM

Nice!!

bam~bam

01-03-2005, 01:47 PM

WOOW, nicy there

LardArse

01-09-2005, 02:47 AM

chilly1

01-09-2005, 01:28 PM

Well if you hve stability problems with Ln2 you can always put a slight insulating barrier to migitate teh temperature until you get it stable this will also increase teh duration of the bench.

Bloody_Sorcerer

01-09-2005, 05:02 PM

wow, those are absolutely incredible. astounding finish on the bottom!

Revv23

01-09-2005, 08:31 PM

very nice work sir

klootzakje

01-10-2005, 02:01 AM

really nice indeed, i might try making such a container as well if me and a friend have enough spare time

erik9287nl

01-10-2005, 07:38 AM

Omg, that mirror finish :slobber:
That's one of the finest container's ive seen :toast:

chilly1

01-10-2005, 11:35 AM

Why make onw I got enough parts here to make 20 more.

Bloody_Sorcerer

01-10-2005, 05:36 PM

what kind of equipment do you use to make those, and what do you do for materials?

chilly1

01-10-2005, 05:52 PM

I use 2 3/8 copper pipe type L or M and a 2 3/8 cap which I drill a 1 3/8 hole in for my block and a chilly1 block and mounting kit. I solder it with high tinsle strength sta-brite #8 and a rosin flux.

echow87

01-10-2005, 09:28 PM

whoa =P, I was thinking of asking someone to mass produce these to sell em premade since not everyone is interested in DIY....:) and this shows up....just what I want

LardArse

01-11-2005, 04:26 AM

Your chilly block is fast becoming a house hold name! Matter of time before Asetek starts panicking :D

k|ngp|n

01-16-2005, 07:04 AM

http://pic8.picturetrail.com/VOL256/1324330/2517856/79874885.jpg
http://pic8.picturetrail.com/VOL256/1324330/2517856/79874881.jpg
Should have some results soon on this baby :P

Nazaar

01-16-2005, 09:13 AM

can't wait :)

chilly1

01-16-2005, 10:32 AM

http://pic8.picturetrail.com/VOL256/1324330/2517856/79874885.jpg
http://pic8.picturetrail.com/VOL256/1324330/2517856/79874881.jpg
Should have some results soon on this baby :P
Great pics.. you can see the reflection of the spiral on the inner wall of the tube...

bh2k

01-16-2005, 11:19 AM

Your chilly block is fast becoming a house hold name! Matter of time before Asetek starts panicking :D

They should make a chilly1 cereal featuring cascade and autocascade mashmellows.

twilius_basic

01-16-2005, 11:28 AM

Ooooo Chilly1 GPU DI container = :D

Looking forward to results!

sang

01-23-2005, 07:14 PM

I think you will need a lot of skills and experience and luck when using LN2 on a GPU. macci's Finnish team is one of the only one who benched GPUs on LN2 and only that once. IIRC he ran into stability and bootup problems, which hit me as well when I did LN2 on GPU.
LN2 is just damn hard to tame on a GPU, you gotta try it to believe it :D

yeah,its true.even at just minus 150C, my herc9700 couldnt make it.Caps are teh most important parts in this case.

anyway,great looking containers chilly.

chilly1

01-31-2005, 09:53 PM

These ar going on a plane ride tomorrow.

http://www.blairwing.com/images/polished.jpg

JSU

01-31-2005, 11:16 PM

wow shiny :)

Pejsen

02-01-2005, 05:33 AM

wow shiny :)

Weee guess where the plain is going :D :D

Looking marvellous :toast:

*edit*

Im talking about a PLANE not some kinda field :D

Bloody_Sorcerer

02-01-2005, 01:29 PM

thats a good movie (in the first picture)
how much do these coolers go for?

Charles Wirth

02-01-2005, 01:59 PM

I made the mistake of calling it siran wrap (http://www.google.com/search?hl=en&q=siran+wrap).

Saran Wrap is your friend (http://www.saranbrand.com/premium.asp).

twilius_basic

02-01-2005, 03:12 PM

I made the mistake of calling it siran wrap (http://www.google.com/search?hl=en&q=siran+wrap).

Saran Wrap is your friend (http://www.saranbrand.com/premium.asp).

Can you post a pic of how it's used? I'm most interested in this :)

[XC] moddolicous

02-01-2005, 03:21 PM

Couldn't you guys use Dry ice on your GPU? The lowest I've gotten it was -70, so maybe it will be stable.

9mmCensor

02-01-2005, 03:22 PM

What do you use for lapping?

Do you test to ensure that the base are flat?

Couldn't you guys use Dry ice on your GPU? The lowest I've gotten it was -70, so maybe it will be stable.
Yeah you can use DI on GPUs. The DI container with the base on the side (at the bottom), is for a GPU.
http://www.blairwing.com/images/polished.jpg
The one on the left.

chilly1

02-01-2005, 10:58 PM

Actually I use a granite lapping stone that is within 0.0005 ( I use a micormeter and a 0.00025 pivot for flatmness) but I then set a piece of sandpaper and take it down to 1500 grit With a 4 axis motion.. so this is as flat as I can get. The paper has a tolerandece of 0.005 also so I guess it is with in 0.00125 inch.

Jort

02-02-2005, 10:02 AM

very nice dude;)

Bennah

02-02-2005, 11:15 AM

These ar going on a plane ride tomorrow.

http://www.blairwing.com/images/polished.jpg

superb work :toast:

[XC] moddolicous

02-02-2005, 12:56 PM

What do you use for lapping?

Do you test to ensure that the base are flat?

Yeah you can use DI on GPUs. The DI container with the base on the side (at the bottom), is for a GPU.
http://www.blairwing.com/images/polished.jpg
The one on the left.

What I meant was that since people were having a hard time with LN2 on their GPU's, couldn't they cool them with DI instead of LN2?

twilius_basic

02-02-2005, 02:05 PM

What I meant was that since people were having a hard time with LN2 on their GPU's, couldn't they cool them with DI instead of LN2?

Sure! :)

chilly1

02-12-2005, 12:03 AM

I use my blocks and a 14 inch piecre of 2.25 inch diameter copper type L pipe with the approiate cap on the bottom/.

twilius_basic

02-12-2005, 11:18 AM

What hold-down method do you use on the GPU units Chilly?

*EDIT* NM, saw this pic: http://www.fissan.dk/test.jpg

Malachia

02-14-2005, 11:55 AM

chilly i can ask you measurements???

the evaporator is 40mm diameter, the tube instad is???

mikead_99

03-05-2005, 12:17 PM

k|ngp|n

03-06-2005, 06:47 AM

I just need to add to this thread. The Chilly1 cpu container is one fine piece of work! I just did my first DI runs last night and managed to hold -68C on the block through 3.5GHz and 1.85V! I've got a bunch of pics I'll post up in this thread later, but just wanted to say now, I'm completely satisfied with the performance of the container. :toast:

edit to add: -68C with Win2k, P&R tweak, which runs hotter. Under XP, non-ACPI tweaked and 3.5GHz temps were -69.x. :)

Great job man.. :toast: ...was browsing the orb and noticed you were on the move.
Chilly's DI containers work damn good. Looks like you got a good chip too...hehe...I know someone else thats benching atm that would kill for that baby right now :P

mikead_99

03-06-2005, 08:07 AM

Thanks man, the results from you guys up there ahead of me helped inspire me to give it a try. :toast: The same chip topped out at only 2.27 GHz under the LS, so I got a little more than I expected out of it with DI. I have to say too, benching hasn't been this much fun in a while. Great fun to have to stay on top of things with the setup while pushing it. :D

LuckMan212

03-16-2005, 07:25 PM

conrad.maranan

03-16-2005, 07:48 PM

do you just pour liquid nitrogen in there and hold it while you bench or what how the heck does this attach to a CPU or GPU? sorry I am such an ignorant n00b but this is most interesting!!!
There are mounts for the containers. You'd need one set of steady hands that's resistant to the cold in order to keep a tube perfectly set on a chip. ;)

twilius_basic

03-16-2005, 07:49 PM

uhmmm so I read this interesting thread post by post with great intensity and I am still wondering what do you guys do with these shiny pipes?? :confused:

whatever it is I am sure it is extreme as hell :p:

do you just pour liquid nitrogen in there and hold it while you bench or what how the heck does this attach to a CPU or GPU? sorry I am such an ignorant n00b but this is most interesting!!!

http://photobucket.com/albums/v223/twilius_basic/th_TXGF067.jpg (http://img.photobucket.com/albums/v223/twilius_basic/TXGF067.jpg)

http://photobucket.com/albums/v223/twilius_basic/th_TXGF055.jpg (http://img.photobucket.com/albums/v223/twilius_basic/TXGF055.jpg)

http://photobucket.com/albums/v223/twilius_basic/th_DI_GPU003.jpg (http://img.photobucket.com/albums/v223/twilius_basic/DI_GPU003.jpg)

http://photobucket.com/albums/v223/twilius_basic/th_DI010.jpg (http://img.photobucket.com/albums/v223/twilius_basic/DI010.jpg)

There are a few random pics of containers mounted on CPU and/or GPU. Basically they are just mounted to the chip, and one puts either dry ice or LN2 into them to freeze the chip :D Enabling very high OC's usually.

LuckMan212

03-16-2005, 08:57 PM

wow that IS extreme!! :explode:
how long before the DI or LN2 evaporates?? do you have to keep filling it or what??

reject

03-17-2005, 03:31 AM

yeh, it evaporates pretty quickly. probly need to fill LN2 2-3 times, DI maybe not that much

mikead_99

03-17-2005, 05:00 AM

Promised pics a while ago and never followed up. Here's a decent one:

http://mysite.verizon.net/res6otqr/sitebuildercontent/sitebuilderpictures/DSCN0882.jpg

And yeah, DI will stay in the tube longer I think. I didn't let the tube get more than 1/2 empty, but maybe 1 full tube's worth of DI for an extended 3dm01 run with CL reruns.

k|ngp|n

03-17-2005, 06:04 AM

BTW--Great job on your 01' scores mike! :toast:
Keep it going man....you have 43k in that rig, I know it.

mikead_99

03-17-2005, 06:22 AM

BTW--Great job on your 01' scores mike! :toast:
Keep it going man....you have 43k in that rig, I know it.

At least high 42's. I'm a little pissed at myself for not getting as much as I could out of it, for the first time ever I think. I didn't get around to finding max cpu clocks until like 5 a.m. and just quit after 1 run. I definately appreciate the encouragement, but I'm having issues finding the time to get through another session atm. Busy as hell at work and a very pregnant wife are major time killers. Hopefully I can get 1 more session in before the jump to FX-57, top 5 is what I wanted out of this rig.

chilly1

04-12-2005, 12:21 AM

http://www.blairwing.com/images/GPU1.jpg

http://www.blairwing.com/images/GPU2.jpg

http://www.blairwing.com/images/GPU3.jpg

zeebs

04-12-2005, 12:38 AM

Sweet.

twilius_basic

04-12-2005, 03:18 AM

Sweet.

Very.

I got a CPU unit, and although I haven't had time to test it yet, the build quality is second-to-none.

http://photobucket.com/albums/v223/twilius_basic/th_Chilly2.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly2.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly3.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly3.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly4.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly4.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly5.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly5.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly6.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly6.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly1.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly1.jpg)

Nerm

04-12-2005, 06:34 AM

Looks good chilly! If I can find some spare time this summer you will be getting me as a return customer for some DI container's. :)

BigPanda

04-16-2005, 05:26 PM

what material do you use for the mount?

what is that greyish black stuff called?

gclg2000

04-16-2005, 05:46 PM

He's using ABS plastic.

mike

04-20-2005, 12:52 AM

BigPanda

04-20-2005, 07:46 AM

Hi all,

I just received a Dry Ice container from Chilly1 - absolutely awesome!
I actually got it for a school science project for my 9 year old son - planning to have lots of fun together.

Chilly1 thanks so much - you did an awesome job!

Cheers

Mike

Wow you are an awsome dad to do that. Now that you have it break some WRs and Overclock :banana: :banana: :banana:

arj

04-21-2005, 03:57 AM

Very.

I got a CPU unit, and although I haven't had time to test it yet, the build quality is second-to-none.

http://photobucket.com/albums/v223/twilius_basic/th_Chilly2.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly2.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly3.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly3.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly4.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly4.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly5.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly5.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly6.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly6.jpg)
http://photobucket.com/albums/v223/twilius_basic/th_Chilly1.jpg (http://img.photobucket.com/albums/v223/twilius_basic/Chilly1.jpg)

Did all those insulation stuff came with the DI container? I might be ordering a pair from Chilly1 soon :D

twilius_basic

04-21-2005, 04:57 AM

Did all those insulation stuff came with the DI container? I might be ordering a pair from Chilly1 soon :D

Yep :toast:

FireDragon

04-29-2005, 06:43 AM

wouldn't fins or pins on the bottom be better for LN2?...idk i will try my hand at it tonight with some surface area i have already made a few but none as good as these great job chilly1

Dragon

twilius_basic

04-29-2005, 07:33 AM

With LN2, although I have not tried it myself, I would be inclined to think that it wouldn't matter.... I mean, will you get a bigger OC from -140C opposed to -135C? :D

Jort

04-29-2005, 11:31 AM

everything counts my friend, sometimes a WR is just some mhz away :)

chilly1

04-29-2005, 11:47 AM

Or a half a degree cooling away...

Jort

04-29-2005, 11:53 AM

you got it:)

thats why you use your evap's for the container i guess :D

i've got a round bar of copper here, its 4.8cm wide and 10cm long

think i can make 1 block for a dry ice container and 1 evap.

you don't mind i give it to a mill factory to make a copy of your block?
not exact the same but just the well tought design :)