View Full Version : My first crack at a XP 2700+
mdzcpa
11-13-2002, 06:18 PM
Okay my first shot at a XP 2700+:
http://www.liquidninjas.com/mdzcpa/ForumPics/XP2700/2705.JPG
Bear with me here...this has only been after 30 minutes of playing around:) I think these chips are much better than the XP 2400s when they first came out.
Here's more details:
http://www.liquidninjas.com/mdzcpa/ForumPics/XP2700/smallsticker.jpg
Kunaak
11-13-2002, 06:43 PM
voltage?
cooling used?
I am curious cause I am still alittle chicken to go past 2400.
fireandsmoke
11-13-2002, 06:59 PM
Excellent!
And what were the cooling/voltage specs??
Awesome.
f&s:toast:
Bushboy
11-13-2002, 07:07 PM
Forget the 2600+, the 2700+ looks amazing :D After 30 minutes too. Again voltages cooling etc.
Well done so far :)
Erik21d
11-13-2002, 07:30 PM
Woohoo I'm jealous!
Don't give up on the 2600's mine's at 2400 with only 1.8v cooled by a K:p :p lance...
We'll see what it can do when I get my prommie or others start getting theirs.
mdzcpa
11-13-2002, 07:35 PM
Hey guys...sorry about the missing info.
The above screenie was at 2.05v core, cooled with H20 via a swiftech MCW462-UT with 226w pelt on a KD7. Idle was about 15c and load was 22c.
You won't need that kind of cooling though...I had this puppy at 2480mhz on air, @ 1.825v with a simple SK6 and 6000rpm delta.
Sorry for the lack of updates, I swapped back to the KD7 for this new CPU, and put the KX7 back into my other rig...which promptly hosed the OS. So I had to do a full install just to get back on line :(
I'll post more updates as soon as I've sorted things out. Right now she is running prime across the room from me at 2715mhz:D
Originally posted by mdzcpa
Right now she is running prime across the room from me at 2715mhz:D
:toast: That is almost too sweet for words. :slobber: ;)
sysfailur
11-13-2002, 08:47 PM
Originally posted by mdzcpa
Hey guys...sorry about the missing info.
The above screenie was at 2.05v core, cooled with H20 via a swiftech MCW462-UT with 226w pelt on a KD7. Idle was about 15c and load was 22c.
You won't need that kind of cooling though...I had this puppy at 2480mhz on air, @ 1.825v with a simple SK6 and 6000rpm delta.
Sorry for the lack of updates, I swapped back to the KD7 for this new CPU, and put the KX7 back into my other rig...which promptly hosed the OS. So I had to do a full install just to get back on line :(
I'll post more updates as soon as I've sorted things out. Right now she is running prime across the room from me at 2715mhz:D
Pleasent. Now crank it to 2.35!@#!@# Rarr! I'm sorry I need to contain myself :P
mdzcpa,
Very nice OC! Don't stop now :)
xgman
11-14-2002, 08:57 AM
This is the same stepping and markings that I got from Newegg. I haven't tested it's limit yet, but this is very encouraging!
kchip
11-14-2002, 11:33 AM
Mdz ,
What psu are you using for the 226 plt? Also what are you using to measur your trmps , die sensor?
Bushboy
11-14-2002, 02:43 PM
Originally posted by kchip
Mdz ,
What psu are you using for the 226 plt? Also what are you using to measur your trmps , die sensor?
I know I'm not mdzcpa, but as he's using a KD7, his temps will be read from the on-die sensor.
Also, can we have some benchies, I'd like to see how well it scores. Over 2.7ghz and that stable, very impressive :)
mdzcpa
11-15-2002, 04:54 AM
Sorry about the delay in updates guys....I went to the Detroit AMD Reality Check (http://www.liquidninjas.com/bbs/showthread.php?s=&threadid=1969) last night with some other buddies from Liquid Ninjas.
Bushboy is right...I was using an MCW462-UT in my Quiet Power and the temps are reported from the internal diode.
I promise to post some benches and push for more tonight:)
Bushboy
11-15-2002, 02:12 PM
Great, I'm looking forward to the results. :)