View Full Version : ABIT BE7 RAID Vmod
gismaster
11-06-2002, 03:18 AM
Hi to all.
Is the same mod as IT7/KR7/KX7 and so on?
10x
Ragnarok
11-06-2002, 09:01 AM
vcore volt mod? or Vdimm volt mod?
If u want higher vcore, just use the connect pins method on the CPU (to change the default volts) and +5/10/15% will give u higher volts
as for vdimm mod, it should be very similar to the BD7II, if not the same. I am pretty sure they are using the same IC
gismaster
11-06-2002, 09:08 AM
Sorry, I mean Vcore Vmod ;)
Ragnarok
11-06-2002, 06:08 PM
vcore mod is piece of cake
u dont need to do ANY modifications to the motherboard
http://www.vr-zone.com/guides/Intel/Northwoodmod/
gismaster
11-06-2002, 11:13 PM
10x for the link RAGNAROK, but do you know anything about mobo mod?
Byez
OPPAINTER
11-16-2002, 12:03 PM
As far as Memory Voltage it's the same as the BD7II, I just pulled it off, what a pain:D Works great though.
http://xtreme.routehero.com/forums/showthread.php?s=&threadid=1348&perpage=30&pagenumber=2
For V-core I have no clue but I have a feeling it would be about the same type mod as the memory only useing different resister values. I'm not going there on this one:D
I guess I'll do a pin mod, I hate the pin mod, raises the voltage to high and you can't dial it in:( Oh well at least I've got plenty of Memory voltage:D
OPP
gismaster
11-18-2002, 09:45 AM
10x to all guys
can you use artic silver as a conductive thermal grease? If not where, could I pick some up?
ryanpgroovy
12-08-2002, 08:48 PM
Artic Silver is no good for the pin mod
get some conductive pen
Colin
12-09-2002, 11:27 AM
I used a wire when I did mine... Very easy to do and even easier to remove! :D
djangolefous
12-14-2002, 11:38 AM
the vmod ddr it very very hard :/
it is the same from nf7
abit suksxxxxx
NoEcho
12-20-2002, 02:07 AM
Heard alot of P4's choke after a month or so of overvolting. What is the danger point?
AlkemiX
12-20-2002, 03:41 AM
Every voltage over 1.75V is danger for Pentium4... I think :(
NoEcho
01-29-2003, 09:46 PM
Is there a consensus on the danger point?