PDA

View Full Version : Official Winchester OC Thread!



Pages : 1 2 3 4 [5]

rzonealley
03-07-2005, 09:49 AM
i have this proc in my signature and i'm very unhappy with it...just can't find any stable combination

tried several things in bios...nothing is 100% prime stable...what shall i do ????

so far stable 240-255 * 9 max.....and needs a lot of juice... :(


seem u have the same newer batch like me... mine is CBBID 0503EPJW
n only stable at 270x9=2.43 on 1.64vcore... i guess not much of this newer batch can run at high clock...

Mrki
03-07-2005, 02:07 PM
Winnie 3200+ Cbbhd 0447 Tpew
DFI NF4 Ultra D
2*256 Adata BH5 (0313we) 2/7/12/2/2/2/5/2/2/1/2 -> 3.9v
Box AMD -> Tower Outside :D
Xp Lsd 2 :(
No patch :)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi28s2.PNG


nice result!

have you some a64tweaker settings?

Jort
03-07-2005, 02:12 PM
2*256 Adata BH5 (0313we) 2/7/12/2/2/2/5/2/2/1/2 -> 3.9v


results are above ;)

fireblade
03-07-2005, 03:47 PM
CBBID 0447 xxxx (cant remember the end :p: )
prime95 stable 2664@1.568v even stable 2565@1.47v but not chance to go further. atm stock cooling so i really cant complain.
http://homepage.ntlworld.com/katmandu666/538.JPG

qk4722
03-07-2005, 06:18 PM
Winnie 3200+ Cbbhd 0447 TPDW
DFI NF4 Ultra-D
2*256 G-SKILL TCCD 2.5-3-3-6 1T 3v /166
Box AMD

3d01
http://service.futuremark.com/compare?2k1=8466388

cpu-z
http://valid.x86-secret.com/show_oc?id=5711

vlad
03-08-2005, 12:53 AM
Bench Stable.

http://members.cox.net/billz1rtc/9x320htt%20%20bandwidth%20test%20screen%20shot.JPG

Not Bench Stable yet.

http://members.cox.net/billz1rtc/9x323%20cpuz.JPG

:D

FX Freak
03-08-2005, 12:59 AM
@vlad
probablay you get 2,91ghz benchstable with 1,65v vcore??

boblemagnifique
03-08-2005, 01:23 AM
nice result!

have you some a64tweaker settings?

A64 Tweaker :

2/7/12/2/2/5/2/2/1/2/166 7.8us/16x/128/D/D/7/12/8/64/E/150

TEDY
03-08-2005, 05:19 AM
A64 Tweaker :

2/7/12/2/2/5/2/2/1/2/166 7.8us/16x/128/D/D/7/12/8/64/E/150

your settings are famous here :rocker:

rzonealley
03-08-2005, 05:58 AM
have anyone encounter the clockgen for nf3 didnt working for their setup?
i've tested on my setup that with clock gen the clock didnt even wanna reach 2.4

dfx
03-08-2005, 06:17 AM
http://img.photobucket.com/albums/v121/johntan16/Benchmarks/293.jpg

boblemagnifique
03-08-2005, 10:52 AM
your settings are famous here :rocker:

I had 4*256 of the same stepping, I have to keep 2 the best but good coef 7 does not help badly as I think, coeff 9/10 I arrive has bencher has 284/285mhz, it is necessary as I test well that :)

Mrki
03-08-2005, 02:46 PM
A64 Tweaker :

2/7/12/2/2/5/2/2/1/2/166 7.8us/16x/128/D/D/7/12/8/64/E/150


thx man :toast:

vlad
03-08-2005, 03:22 PM
@vlad
probablay you get 2,91ghz benchstable with 1,65v vcore??

I think so to but ill have to flash to a diffrent bios v1.4 only goes to 1.7v and winnie's undervolt .1v. Anyone know how high the vcore in v1.5X goes?

S_Klass
03-08-2005, 03:48 PM
Hey guys, new to XS and excited to be on board. Way back when I was part of Hardware Central and then Overclockers Network (OCN).

I have in my hot little hands a retail A64 3000+ with an odd stepping....

CBBHD 0444MPM
4448974A52016

Ermmm why only 3 letters instead of 4? I understand it's made in 04 and in the 44th week, I wanted a 0448SPAW but I had to settle for what they had. Anyone have any idea what I should expect out of it?

This is going in a

DFI NF4 S939 Ultra-D
Thermalright XP-90 w/ Thermaltake 90MM Smartfan
1GB PNY PC4000 DDR - with LED BLiNG! ;)
XFX GeForce 6600 GT PCI-E 128MB
ATI TV Wonder Pro
2x 120GB WD SATA SE w/ 8MB in RAID0
NEC 3620 DL DVD Recorder
Soyo BayOne
SurePower 400 Watt PSU
Antec SuperLAN Boy w/ 3x 120MM Thermaltake ThunderBlades

Also I have a PCI Sound Blaster Audigy (1). Should I depend on the Karajan or pop the SB card in there?

vlad
03-08-2005, 04:00 PM
:welcome: The CBBHD's seem to be doing alot better the most,:idea: Fire that puppy up and let us know. Good luck. :welcome:

stealth17
03-08-2005, 04:27 PM
are the clocks in this thread prime stable?

S_Klass
03-08-2005, 04:27 PM
:welcome: The CBBHD's seem to be doing alot better the most,:idea: Fire that puppy up and let us know. Good luck. :welcome:

Thanks!

That's what I'm counting on. I had to jump through some serious hoops to return a CBBID 0504EHEW for the 0444.

I am DYING to fire it up but my RAM, VIDEO CARD and HSF are all in the mail as we speak.

vlad
03-09-2005, 12:25 AM
are the clocks in this thread prime stable?

Some are some aren't. Some are Max Bench Stable and some are just Max Screen shot stable. ;)

skematix
03-09-2005, 12:29 AM
those are very nice overclocks guys..i wish i could get a better stepping but i guess im happy what i have since people have problems with the newer chips..i'll post pics of my bench...later

cpulloverclock
03-09-2005, 12:33 AM
with a 3000+ 0448SPMW and vapochill PE modded + BH-5

with a 3000+ 0448SPMW and vapochill PE modded
http://membres.lycos.fr/cpulloverclock79/Informatique/cpumark.gif
http://membres.lycos.fr/cpulloverclock79/Informatique/cpumark..gif
http://membres.lycos.fr/cpulloverclock79/Informatique/10m...gif
http://membres.lycos.fr/cpulloverclock79/Informatique/sandra..gif

1T timing and I lost the mouse/keyboard, bug inside, I think 3400MHz would have been possible

skematix
03-09-2005, 12:43 AM
nicely done there.....here is my minor clock :)

http://img150.exs.cx/img150/3963/330test3cf.jpg

cpulloverclock
03-09-2005, 12:50 AM
bad compression :( but nice score

stealth17
03-09-2005, 04:31 AM
cpu stepping: CBBHD 0449MPM

Max Screen:
http://upload.moops.tk/./userfiles/Jordan/screenies/2600.JPG

24/7 completly stable, BH-6 ram running 260mhz benches at 7.4gb/s bandwidth

http://upload.moops.tk/userfiles/Jordan/screenies/247stable.JPG

TEDY
03-09-2005, 04:39 AM
omg 1.85vcore :D how hot is there ? :P

stealth17
03-09-2005, 04:47 AM
omg 1.85vcore :D how hot is there ? :P

didnt even check with load...its on wc though...sooo its not too bad.

1.85v isnt 24/7 though

soodent
03-09-2005, 05:00 AM
So my first post.Sold my buggy 0451 3200+ winch and got 0504 CBBID 3200+ and a huge difference.Max Prime stable now 2,63ghz(1,6v) vs 2,42ghz(1,6v) with 0451.Please dont call the cpu-"winny or winnie" as its sounds like "my darling windows".I will fill my details and profile later.

TEDY
03-09-2005, 05:59 AM
CBBID doing 263*10 at 1.6v ? wow now that's something new.

Was you previous 0451 CBBHD soodent ?

Welcome to XS.

Flash_m
03-09-2005, 06:26 AM
CBBID 0503 (http://flash-me.info/stacker/superpi522.JPG) with +10°C water

(and it's Finnish superpi) ;)

soodent
03-09-2005, 07:15 AM
CBBID doing 263*10 at 1.6v ? wow now that's something new.

Was you previous 0451 CBBHD soodent ?

Welcome to XS.[/QUOTE]This 0451 stepping is unknown(sold the protsessor).

skematix
03-09-2005, 08:29 AM
oh yeah forgot to note mine is a 0447 tpfw does 2700MHZ 1.5vcore max....but current the screenshot is my 24/7 2640mhz 1.44vcore 330x8 1:1

zeebs
03-09-2005, 11:28 AM
CBBHD 0447 SPAW (again)

http://img.photobucket.com/albums/v516/zzzachb/2800.jpg
http://img.photobucket.com/albums/v516/zzzachb/sandra2800.jpg

TMM
03-09-2005, 09:11 PM
3200+ winchester CBBID 0504 (forgot full stepping and im too lazy to take the hs off again :/)

10*260 @ 1.68v prime95 stable on quiet aircooling (XP-120 + panaflo L1A)

able to run through SuperPI 1M at 2.7ghz @ 1.725v :toast: , although its far from prime stable at that.

not the best CPU ever but hey, its not too bad for a CBBID :cool:

okra
03-11-2005, 07:31 AM
CBBHD 0449 MPM 3200+ Winchester
2500 mhz @ 1.4v (using 5/6 divider) - totally stable (p95, benches, games)
2600 mhz @ 1.55v (using 5/6 divider) - totally stable (p95, benches, games)

anything above 2600 seems to want 1.6v or more - using stock hsf so that is not an option b/c the heat output is cranking at 1.6v and up with stock hsf. (Loads approaching 60+ deg C).

Very small real world performance difference between 2500 & 2600, so 2500 @ 1.4v is my 24/7 overclock. Very cool running chip.

BigBen
03-11-2005, 01:14 PM
Hi getting the new DFI N4D310p Bios has allowed me to run 9x300 1 to 1 where before I was at 10x270 .... 1.55V for the chip 2.7V Ram

Duronbird
03-12-2005, 01:23 AM
3200+ water cooling +10c + DFI Ultra-D/sli + KHX3500/256MB 3.6v

http://koti.mbnet.fi/macoo/duronbird/Winchester/3200/CBBHD0447_3200_3.JPG

http://koti.mbnet.fi/macoo/duronbird/Winchester/3200/Pifast18.31s.JPG

tema
03-13-2005, 06:58 AM
http://forum.pcekspert.com/attachment.php?s=&postid=201074
(cpu-z screenshot)
this is my 3500 Winie with box cooler...

FriGidi
03-13-2005, 09:09 AM
Here are my 24/7 settings, btw straight from boot :cool:
24/7 (http://img222.exs.cx/img222/5179/2477lf.jpg)

April
03-13-2005, 09:17 AM
3200+ winchester, cooled with Hyper6 and prime stable.

CBBID 0503EPCW

xavicl
03-13-2005, 12:31 PM
prime 20 min only?, go and up those ocz plat rev 2 :D it can do 280 2,5-3-3-5

April
03-13-2005, 10:01 PM
prime 20 min only?, go and up those ocz plat rev 2 :D it can do 280 2,5-3-3-5

It was just for the screenshot. I've had it priming for 24 hours stable.

chainhoe
03-14-2005, 12:36 PM
- Winchester 3000+ 0437VPMW w/o IHS
- Zalman CNPS7000A-AlCu
- DFI Lanparty UT NF4 Ultra-D
- 2*512mb TCCD

[link] (http://www.hot.ee/razor/2400.jpg)

new mobo, same old Winchester. with IHS it needed 1.4V to reach 2400mhz even on watercooling. oh, and DFI = teh ownage

BigBen
03-14-2005, 12:51 PM
Hi,
Anyone else running there memory at 300mhz 1 to 1 in dual channel?

andyOCZ
03-14-2005, 01:04 PM
Hi,
Anyone else running there memory at 300mhz 1 to 1 in dual channel?

I have 2 Wincesters that wiill do over 300mhz 1:1. This is on the DFI NF4 board. One of them quit at 270 on the MSI Neo2, it's an 0441 and the other is an 0503 that has never seen the MSI (thank god).

stealth17
03-14-2005, 01:04 PM
Hi,
Anyone else running there memory at 300mhz 1 to 1 in dual channel?


nice! what memory is that?

BigBen
03-14-2005, 01:32 PM
nice! what memory is that?

It was in my sig lol 1GB Adata PC4800 :) .... I did have it at 305 but windows crashed after a minute or so but I think its more to do with chip than the memory

Regards

SLaY3r07
03-14-2005, 01:43 PM
Info in my sig. I am going to be getting a OCZ Powerstream 520W to replace my POS Aspire 500W. So its possible I will be able to get around 2.7GHZ stable.

xavicl
03-14-2005, 01:50 PM
I do 300x9, but 1.66V :( And can do 305x9 but unstable. Look signature

vlad
03-14-2005, 04:24 PM
Hi,
Anyone else running there memory at 300mhz 1 to 1 in dual channel?

Im running at 9x319htt 1:1 in Dual channel But this is with 256mb dimm's. :)

NST6563
03-14-2005, 08:06 PM
just got my system a few days ago and have so far pushed my 3200+ to 2.6Ghz @ 1.6v using an XP-90.

just curious though...is 1.6v a safe "everyday" or "24x7" voltage to run the chip on??? I don't want to fry it as I plan on keeping this setup for a while. If it's not a recommended daily voltage, I'll drop it back to 1.52 where I can still hit 2.5Ghz.

thx

oh...stepping info for curiosity:
CBBID 0503EPHW

ccokeman
03-14-2005, 08:28 PM
Hi,
Anyone else running there memory at 300mhz 1 to 1 in dual channel?
Why yes ...yes i am.

chainhoe
03-14-2005, 09:06 PM
Why yes ...yes i am.

nice sticks, could you post a screenie where your A64tweaker settings are on?

corvus_corax
03-14-2005, 09:47 PM
Hi guys, What do you think about this Winnie? :D
This is with stock Heatsink.
http://img.photobucket.com/albums/v678/OCcorvus_corax/OCs/bbde4496.gif
http://img.photobucket.com/albums/v678/OCcorvus_corax/OCs/0e7bf5cf.png
The test continues, but i'm waiting for migrate to better cooling solution.

OjorisO
03-15-2005, 02:25 AM
Model: 3000+ Winchester
Core: 0.09
Date: 0444
Stepping: CBBHD
Code: VPEW
Mhz: 2900Mhz
Gain: 1100 Mhz Gain
Vcore: 1.525v
FSBxMulti: 9 x 323, memory running 1:1 with 2.5-4-3-7 timings (2x 512mb G.Skill)
Cooling: Boxed cooling
Stable: Not very stable, needs 1.6v to be stable, but there's barely any cooling paste on it so that means overheating, been trying to get some as5 ... Perfectly stable though at 9 x 311 with 1.5v

http://img223.exs.cx/img223/9692/2900mhz5tu.jpg

(also does:

2.6ghz with 1.3v
2.4ghz with 1.2v
2.3ghz with 1.1v :cool: )

Hombre
03-15-2005, 02:32 AM
Hi guys, What do you think about this Winnie? :D
This is with stock Heatsink.
http://img.photobucket.com/albums/v678/OCcorvus_corax/OCs/bbde4496.gif
http://img.photobucket.com/albums/v678/OCcorvus_corax/OCs/0e7bf5cf.png
The test continues, but i'm waiting for migrate to better cooling solution.

That's excellent, crank up the voltage and slap a XP-120 sink on that baby and show us 3Ghz on air! :toast:

kakaroto
03-15-2005, 06:09 AM
http://www.xs4all.nl/~famchow/A64_3000_winnie/0448%20RPMW/2630MHz_prime_boxed.JPG

Ghehehe, boxed cooler

CBBHD 0448 RPMW

Marvin
03-15-2005, 11:27 AM
Mine 3200+ can do 2500 ghz with default voltage. Waiting to finish the chiller to see better results.

PCcrazy
03-16-2005, 12:39 PM
kakaroto ur results is very impressive considering the stock cooling and voltage..

Model: 3000+ Winchester
Core: 0.09
Date: 0444
Stepping: CBBHD
Code: VPEW
Mhz: 2900Mhz
Gain: 1100 Mhz Gain
Vcore: 1.525v
FSBxMulti: 9 x 323, memory running 1:1 with 2.5-4-3-7 timings (2x 512mb G.Skill)
Cooling: "Boxed cooling"

Ojorifiso, "Boxed cooling".Impressive oc potential u got there...a gem...rarely to be found...

Alec
03-16-2005, 01:04 PM
Managed to get 2.6GHz @ 1.425Vcore :banana4:
Can also get 2.55GHz @ 1.4Vcore :)
http://host366.com/pics/lowvolts.JPG

kakaroto
03-16-2005, 01:45 PM
here a shot 300x9:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=26730&stc=1

Alec
03-16-2005, 01:50 PM
omg sweet stuff man!
Im trying to get my winnie pie sable at 2.7GHz but she just dont wanna do it :( Not even at 1.7vcore... gotta wait till i go water lol

Jethro
03-16-2005, 04:33 PM
not all CBBID suck! i got another one 504EPMW does 2.75 so far with 1.7v mobo is holding me back so far (got an abit AV8 to play with as well).

updating bios etc before i really push it. much better chip to play with either way :)

BaNaNaS
03-16-2005, 05:47 PM
my cbbid does 2600mhz 290x9 :D

corvus_corax
03-16-2005, 10:32 PM
kakaroto You have a Great Winnie :slobber:
Another pic mine:
http://img.photobucket.com/albums/v678/OCcorvus_corax/OCs/WinnieOn270.jpg

Alec
03-16-2005, 10:47 PM
sweet volts man! :toast:

stealth17
03-17-2005, 02:40 AM
nice one corvus_corax!

do the winnies put out less heat than a similar clocked aXP since they are 90nm and require less voltage?

thanks

Alec
03-17-2005, 07:03 AM
I get 33 degrees idle on air at 1.5Vcore

W4nK5ta
03-17-2005, 08:26 AM
New CPU arrived... I like it. :banana:

3200+ 0450, 2,8 GHz @ 1,616 V stable so far. Here a lil' Super PI bench:

http://img128.exs.cx/img128/8306/superpi1ma643200283ghz0nw.jpg

Alec
03-17-2005, 09:34 AM
:| woah dude thats a sweet winnie! Put that on water or phase change and get her past 3GHz! :D

Alec

Zildjian
03-17-2005, 09:48 AM
CBBID 0502 APAW 3000+
2250 Mhz 9*250 1.3v
2520 Mhz 280*9 1.55v
http://www.2and2.net/Uploads/Images/2520_34s_irfan.jpg

Super strokey
03-18-2005, 09:50 AM
New winnie showed here, cbbid 0502bpew. Will post oc once i get to it... not expecting a whole lot though

SLaY3r07
03-18-2005, 09:05 PM
New CPU arrived... I like it. :banana:

3200+ 0450, 2,8 GHz @ 1,616 V stable so far. Here a lil' Super PI bench:

http://img128.exs.cx/img128/8306/superpi1ma643200283ghz0nw.jpg


:slobber: :slobber:

ArcTan
03-19-2005, 04:02 AM
:slobber:
some of these winnies are awesome

I only have my 3000+ at 300 x 9 - 1.52v prime 10hrs on air

gundamit
03-19-2005, 04:19 AM
New CPU arrived... I like it. :banana:
3200+ 0450, 2,8 GHz @ 1,616 V stable so far. Here a lil' Super PI bench:
Nice CPU. Stepping and week?

W4nK5ta
03-19-2005, 11:13 AM
Week 50 of '04. I've forgotten the stepping. :rolleyes: I will tell you next time when I reseat the waterblock. ;)

recover
03-19-2005, 01:15 PM
Don't get me wrong, I love what you guys are doing pushing these Winchesters to see what the processor themselves are capable of. . but you cant seriously tell me you run like this all the time. Do any of you guys use your PC's for gaming? I mean look at those memory timings...
Do you readjust your settings and get tighter memory timings (2-2-2-5 1T) for gaming or do you just run them balls out with the CPU all the time?

I'm currently doing everything with my 3200+ Winchester@245*10 1.55v and my memory on the 166 divider running at 2.4 with 2-2-2-5 and 1T. Solid performnce, plenty of memory bandwidth. I don't see anything wrong with that. I'd rather have the mem. bandwidth when it's time to game and load those maps...but maybe that's just me.

-recover-

vlad
03-19-2005, 05:47 PM
you cant seriously tell me you run like this all the time. -recover-

Well some of the screenshot's you see are Max bench stable and some may even be suicide screenshot's But some are 24/7 setting's and yes some of us do game at these speed's. :) :welcome:
and that is why it's called Xtreme. :hehe:

bachus_anonym
03-19-2005, 05:54 PM
Don't get me wrong, I love what you guys are doing pushing these Winchesters to see what the processor themselves are capable of. . but you cant seriously tell me you run like this all the time. Do any of you guys use your PC's for gaming? I mean look at those memory timings...
Do you readjust your settings and get tighter memory timings (2-2-2-5 1T) for gaming or do you just run them balls out with the CPU all the time?

I'm currently doing everything with my 3200+ Winchester@245*10 1.55v and my memory on the 166 divider running at 2.4 with 2-2-2-5 and 1T. Solid performnce, plenty of memory bandwidth. I don't see anything wrong with that. I'd rather have the mem. bandwidth when it's time to game and load those maps...but maybe that's just me.

-recover-
well, imagine that yes...
we do use our PCs 24/7. maybe not always at what they can do at it's maximum but close to it.
My 3200+ Winnie can pass full set of benches on 12C air @ 2.76GHz... For everyday use, it's doing absolutely fine, rock stable, @ 2.67GHz, pushing TCCD clocks @ DDRDDR592 7-3-3-2.5-1T :) Docking (like folding), gaming, priming... whatever you throw at it it passes...

BTW... Welcome to XS and get your rig up to speed :thumbsup: Plenty of advice on how to do it can be found here :)

recover
03-19-2005, 06:06 PM
thanks for the welcome guys. i've been lurking for quite sometime here and over at at ocforums for. .well years actually.


get your rig up to speed :thumbsup:

i'd say running 450Mhz over on stock cooling and that lame @ss thermalpad is up to speed enough for now. :cool:
my previous rig was an Athlon 1700+ DLT3C running at 2.1Ghz with a all copper thermalright the size of a grown mans fist and a 92mm Vantec Tornado....after all the racket that thing made Ive decided to run stock..or...close to stock for a couple months. I'm going to replace the stock cooling, and get new ram soon enough.

thanks again though. i'll stick around as long as you'll have me.

-recover-

vlad
03-19-2005, 06:26 PM
thanks for the welcome guys. i've been lurking for quite sometime here and over at at ocforums for. .well years actually.-recover-

What's your name @ Ocforums?

NST6563
03-19-2005, 06:33 PM
Do any of you guys use your PC's for gaming? I mean look at those memory timings...
Do you readjust your settings and get tighter memory timings (2-2-2-5 1T) for gaming or do you just run them balls out with the CPU all the time?
-recover-

I personally don't see the big issue with tight memory timings and games. If you're running your ram at those ballz-to-the-wallz speeds and you have a decent video card...you're not going to notice a damn thing when running 1600x1200 6xaa/16xaf at 127fps with loose timings or 140fps with tight timings...

point is...you're already over 100fps...nothing's going to touch you unless you just plain suck...
:p:

Smy
03-19-2005, 06:38 PM
2.8ghz on a a64 3500+ :CBBDF 0437 RPAW
cool by water (dd tdx 2*dual procore and gfx is watercool)



cpu.z (http://home.no.net/comerade/pc/smy-2800mhz.jpg)

Super strokey
03-20-2005, 05:50 AM
awesome, just got my cbbid 0502 in and it wont do 2.2 ghz regardless of the voltage... its just so awesome! Ebay for this bugger i think.

boblemagnifique
03-20-2005, 06:04 AM
awesome, just got my cbbid 0502 in and it wont do 2.2 ghz regardless of the voltage... its just so awesome! Ebay for this bugger i think.

3000+ CBBID 0502 FPMW -> 2.4ghz (300x8) at 1.55v stable (box amd)

p0tempkin
03-20-2005, 07:33 PM
Anybody get a chance to test any newer CPUs yet? I'm waiting on a motherboard, but I just got two 3000+ 0507 FPAW.

corvus_corax
03-20-2005, 09:16 PM
What do you think about voltage in this Winchester 3200+ (http://img.photobucket.com/albums/v678/OCcorvus_corax/Test/WStock1-18.jpg)?
Is running on stock at 1.18V, even can go on 1.1V, but...is bad (is secure for memory controlller)), is good?
Its Prime 2004 estable too.
Thanx.

BTW, Ignore temps and Psu rails volts, they are wrong.

Hombre
03-21-2005, 03:02 AM
What do you think about voltage in this Winchester 3200+ (http://img.photobucket.com/albums/v678/OCcorvus_corax/Test/WStock1-18.jpg)?
Is running on stock at 1.18V, even can go on 1.1V, but...is bad (is secure for memory controlller)), is good?
Its Prime 2004 estable too.
Thanx.

BTW, Ignore temps and Psu rails volts, they are wrong.

What's the stepping?

corvus_corax
03-21-2005, 10:21 AM
What's the stepping?
Winchester 3200+ CBBHD 0444 SPMW

Marvin
03-21-2005, 10:31 AM
Here i got a winchester 3200+ CBBHD 0444 SPMW
2.65 ghz at default voltage .

corvus_corax
03-21-2005, 10:50 AM
Here i got a winchester 3200+ CBBHD 0444 SPMW
2.65 ghz at default voltage .
Yep, me too, and with the Heatsink stock. But, have you tried reduce voltage on stock frequencies (200x10) at the minimun stable?. For example, i've used 1.18V, even 1.1V, and it's estable (SuperPI 32M, S&M, Prime 2004) but my question is if what i'm doing is secure, or my MC could die?

SET
03-21-2005, 07:48 PM
Winchester 3200+ (CBBID 0505EPMW) 2.6Ghz @1.61v with POLO735...

rzonealley
03-22-2005, 07:41 AM
@LANero nice clock for CBBID

SET
03-22-2005, 08:22 AM
Thanks rzonealley...

Apparently this it is the point mas highly that I can reach, but the PI is very bad and even I cannot know that it happens.

http://img146.exs.cx/my.php?loc=img146&image=setpi4pc.jpg

NST6563
03-22-2005, 02:07 PM
LANero...can you get your CBBID any higher than that with more voltage? Mine will do the same speeds with about the same voltage...but it seems to hit a wall at 2.65Ghz...even with added voltage. 270fsb and it won't even load the OS, it just goes into a reboot cycle right after the cmos backup.

btv94
03-22-2005, 02:42 PM
What is a good Winchester overclocker for aircool? 3200+? 3400+ or 3500+?

Thanks,

Jethro
03-22-2005, 03:02 PM
My CBBID does 2.75 but i get flashing textures at any more than 2.65. Time for Vcore vmod!!

SET
03-22-2005, 03:23 PM
Not with more not with fewer voltage, the sweet point of this seems to be 2.64 for benchs. I am going to try with Water closet to see if it gains something of mhz.

Jethro
03-22-2005, 03:36 PM
has anyone hit the wall with 1.7vcore only to do vmod and gain mhz at say 1.8v?

I need inspriation to do vmod! :D

NST6563
03-22-2005, 04:27 PM
I think I've found some sort of pattern with my chip though. It'll do up to 2.4ghz @ 1.42v...after that it seems that I need .1v for every 100mhz increase. To hit 2.5ghz, I need 1.52v...2.6ghz needs 1.62v...and I'm not brave enough to feed it 1.7v to see if it does 2.7ghz :p:

Duronbird
03-23-2005, 07:13 AM
http://koti.mbnet.fi/macoo/duronbird/Winchester/3200/CBBHD0447_3200_hexus39.59s_r404.JPG

Winchester 3200+ CBBHD0447 @3G :D cooling r404

TheMeatFrog
03-23-2005, 10:45 AM
Well after I fried my first pair of TCCD sticks I finally got some new ones and have been able to really see what my system can do. Here is a screen shot of a little testing I did lastnight.

TMM
03-23-2005, 11:53 AM
got my 3200 winnie CBBID 0504 DPGW to 2500mhz 1.55v prime95 stable :toast: ... But i kind of killed my Abit AV8, so i'll be getting a K8N Neo2 in due time :banana:

Gorod
03-24-2005, 12:47 PM
IHS removed and polished with sand paper . Then reinstalled back . Original thermal grease under the IHS replaced with Arctic Silver 5 .Results = +150MHz overclock so far . 2800MHz Benchmarks stable, some will bench at 2870MHz. 2735MHz MAx. on unmodded CPU before the modification was done. Will continue to polish IHS later .

http://img59.exs.cx/img59/6757/0014hm.th.jpg (http://img59.exs.cx/my.php?loc=img59&image=0014hm.jpg)http://img59.exs.cx/img59/7383/0109pb.th.jpg (http://img59.exs.cx/my.php?loc=img59&image=0109pb.jpg)http://img59.exs.cx/img59/9554/0138ja.th.jpg (http://img59.exs.cx/my.php?loc=img59&image=0138ja.jpg)http://img59.exs.cx/img59/6340/0223ei.th.jpg (http://img59.exs.cx/my.php?loc=img59&image=0223ei.jpg)http://img38.exs.cx/img38/673/picture36ti.th.jpg (http://img38.exs.cx/my.php?loc=img38&image=picture36ti.jpg)http://img38.exs.cx/img38/4831/picture49ox.th.jpg (http://img38.exs.cx/my.php?loc=img38&image=picture49ox.jpg)

http://img46.exs.cx/img46/2373/pcmark200294172871mhz319x90185.th.gif (http://img46.exs.cx/my.php?loc=img46&image=pcmark200294172871mhz319x90185.gif)

SLaY3r07
03-24-2005, 12:49 PM
MMMMM, Sanded IHS + Hyper 6 = :slobber:

Gorod
03-24-2005, 12:56 PM
:D Thats what happens when u dont have money for a Vapochill :rotf:

Vincentvega18
03-24-2005, 01:09 PM
3200 cbbid 0507 at 2.75 fully benchable @ 1.65 volts........kinda crazy, it wasnt hard at all, benched on a cold night @ 2.8 but max screen:http://valid.x86-secret.com/show_oc?id=8108. that was with 1.76 volts........wouldnt do anything @ 3ghz, could clockgen it but then it just rebooted as soon as i switched app, wasnt temps or mem, and im pretty sure my vcore was enough.........ill try again on the next cold one.

NST6563
03-24-2005, 01:56 PM
Clockgen has never worked for me. Whenever I've used it to change the speed in windows, the system just freezes. If I make the changes in bios, it's perfectly stable.

btw...does "burning in" a winnie help any at all? I juiced mine up to 1.64v and put it on the prime torture test. Max temp I've reached is 44c w/XP-90 and ceramique. How long should I burn it in for? I was planning on just running the prime torture on it for a few 12 hour periods (with short breaks to check email and junk)...should I go for a week?

[_Silence_]
03-24-2005, 04:05 PM
Ppl can anyone tell me the max voltage for a 3200+ Winnie cooled by r404a Prommy? Like 1.8v 24/7 and 1.85v for benching, too much or I can give more? Opinions please =)

[_Silence_]
03-24-2005, 06:05 PM
Need some help from people that have subzero working Winchesters.
Mine did 2600Mhzs stock cooled 1.65v, now r404a cooled it does 2800Mhzs @ 1.76v, but even @ 1.85v i cant get more than 2800Mhzs, anyone with the same problem? It's not HTT limited neither memory limited.

(sry for double post)

stealth17
03-24-2005, 07:47 PM
Need some help from people that have subzero working Winchesters.
Mine did 2600Mhzs stock cooled 1.65v, now r404a cooled it does 2800Mhzs @ 1.76v, but even @ 1.85v i cant get more than 2800Mhzs, anyone with the same problem? It's not HTT limited neither memory limited.

(sry for double post)

lets put it this way, i know a guy that ran -35c load phase-change and 1.9v 24/7 killed his chip in a few days...

soo i wouldnt go much above 1.8 24/7 unless you want an excuse for a new venice or san diego :rehab:

Jethro
03-25-2005, 05:18 AM
very nice work Gorod! Id try that out myself it my mobo wasnt the limiting factor! Great pics to!

TheMeatFrog
03-25-2005, 11:40 AM
Here is a little update with some EVEREST scores. Pushed it to 301 with the same vcore. Any higher vcore and I think I'm running into heat problems. From my experiance most winchesters loose stability around 56 degrees. The reason I think it's heat is because the higher I got with my vcore the faster my PC would freeze during 3DMark05. Maybe a little while down the road I'll invest in a XP-90. I would do it now but I just got ripped off on ebay/paypal for one of my A64 3000+ chips. :mad: Anyways here are the EVEREST screen shots!

Alec
03-25-2005, 11:45 AM
woah sick HTT and RAM speeds!!

stealth17
03-25-2005, 02:33 PM
Here is a little update with some EVEREST scores. Pushed it to 301 with the same vcore. Any higher vcore and I think I'm running into heat problems. From my experiance most winchesters loose stability around 56 degrees. The reason I think it's heat is because the higher I got with my vcore the faster my PC would freeze during 3DMark05. Maybe a little while down the road I'll invest in a XP-90. I would do it now but I just got ripped off on ebay/paypal for one of my A64 3000+ chips. :mad: Anyways here are the EVEREST screen shots!

wow 300mhz ram with those timings and 2.7v :slobber:

vlad
03-26-2005, 09:14 PM
I picked up another 3000+ from a bud of mine, CBBHD0450TPFW. Its not as good of an overclocker as my 0450UPBW but its not bad at all. It will do 2.4ghz @ Default vcore, 2.5ghz @ 1.5v and 2.7ghz with 1.65v(1.525+8%) The temps @2.7 have been around 32c idle and after 9hrs of cpu-burnin and around 4hrs of nonstop benching the temps never went above 52c. Now that my DFI is here it and my Neo2 will go into 24/7 duty in my everyday rig giving my Epox/1700+ a much deserved rest.



http://members.cox.net/vladz1rtc/cbbhd0450tpfw%209x300%20screen%20shot%202.JPG

These two pic's show 2.4ghz@Default & 2.5 @ 1.5v. :D

rzonealley
03-26-2005, 09:40 PM
didnt know why mine so bad. test it with many setting already still the highest is 2.4.
guess cbbid 0503EPJW really suck.

vlad
03-26-2005, 11:31 PM
That seems where CBBID's mostly Sh** the bed. :(

kta
03-29-2005, 04:41 AM
Hi all....newbe in this forum:D
But i can write my o/c:
MSI NEO2 K8N Platinum bios 1.36mod
3000+@2700mhz 1.65v CBBHD 0449GPGW
GSKILL pc4400 (440)@ 2.5-3-3-7 6:5(166) 1T 2.75v
But something i cant understand why i cant get higher with my memorys.
When i start too o/c so it will start too be unstabel at 255HTT with memorys @ 1:1 1T
So too hit 300HTT with my cpu so have i to clock down my memorys too 6:5(166)
I have tryed with 2 difrents cpu and its stop at same place both times(255htt) and both cpu did hav difrents steppnings.
And when i try memtest i get over 6000 error @ 275x7-9 2.5-3-3-7 1:1 1T
//kTa(swedish)

vlad
03-29-2005, 02:24 PM
:welcome: kta. Our rigs are very sim, My GSkill is 431 chips and i can run 1:1 up around 322htt but not @ 2.5-3-3-7 I run 2.5-4-3-7. Try going really loose then tighten them a little at a time. Good luck. :)

rzonealley
03-30-2005, 11:45 AM
might getting some old proc production winnie in few days and i'll update u guys.
wanna throw my cbbid if this old proc i'm getting is better than my cbbid.

kta
03-30-2005, 02:20 PM
vlad:
I have tryed everything to fix it but did not fix it:(
I have been msg with a guy from gskill to and i have dine all what i can found in gsforum and in here and all o/c im in.
But i think what can be bad here now...when i get 310htt do i lose my sound and with bad sound...so it can be my mainboard who not let me mit high that 300x9 2.5-3-3-7 6:5 (166) 1T....but i can hit 300x9 2.5-3-3-7 1:1 at 2T.
why so low at 1T?
Need to get more power of my cpu and memory so i can get higher on ORB list on 3dmark01 and 03 im on 8 place on 3dmarks if i remeber right now:)
EDIT:
Forget to say that i hit 2.5-4-3-7 1:1 1T @ 300x9 in singel channel with both memorys(1 at the time in mainboard)

Hugo van Dijk
03-31-2005, 03:12 PM
Here is my crappy chip :(

Its a:

AMD Athlon 64 ADA3200DIK4BI
CBBHD 0449GPHW
1169847L40077

although this is a old result (with my old Zalman CNPS 7000B-cu), at the moment i have a CoolerMaster Hyper48, + I replaced my chieftec 360 watt psu with a 550 watt lc power (wich is much more stable), and next week i will remove my heatspreader. So after all this i might oc much better.

This is the max my processor can run (Max voltages mobo can hadle with bios 1,3 - no voltmods ((Original.)

http://members.lycos.nl/hugnix/2900.JPG

Alec
03-31-2005, 10:39 PM
Not a bad chip!
Pretty sweet clocks but a sick vcore voltage! :banana:

Congrats tho on 2.9GHz :toast:
Alec

vlad
04-01-2005, 12:44 AM
:shock: WOW! That is SICK voltage. How stable is it at that speed? I can boot at 2871mhz(Bench stable) then use clockgen to hit 2911mhz but its not even bench stable but thats with 1.7v (Max 1.4 Bios). Maybe with the heatspreader off youll hit 3ghz:slobber: Good luck with it.

rzonealley
04-01-2005, 05:52 AM
got new proc already but still not satisfied with the stepping.
its a CBBID again damn. should find a better one later. anyone
got the same as my new proc 3000+ CBBID 0451MPM? still priming at 2.0
stock vdimm(corecell detect 1.36v).

mad mikee
04-01-2005, 10:01 AM
Mine worked fine this way b4 I went back to H20. (Pretty much the same as now but 13c warmer. :D

If done right MUCH better clamping and NO CPU chipping.

I recommend this over an XP-120 (better clamping, safe for CPU, dropped my temps by 5c (yeah I was surprised @ teh drop also :eek: ) had to flatten teh top on the CPU, use 2000 grit paper on flat glass w/ water.



IHS removed and polished with sand paper . Then reinstalled back . Original thermal grease under the IHS replaced with Arctic Silver 5 .Results = +150MHz overclock so far . 2800MHz Benchmarks stable, some will bench at 2870MHz. 2735MHz MAx. on unmodded CPU before the modification was done. Will continue to polish IHS later .

Hugo van Dijk
04-01-2005, 12:41 PM
but thats with 1.7v (Max 1.4 Bios)

Thanks but i have the original 1.3 bios (not a modded version), I just use core-center to increase my voltage to 1,832V, First i selected the highest voltages in my bios (for example 1,5V +10%), then i booted in windows and start core-center and downclock the voltages in core-center to the lowest as possible. then i reboot again to the bios to make sure my voltages are still the same and save it again. then I boot windows again and start core-center, and this time i put the voltages as high as possible, wich results in 1,832V (other voltages are also possible). :)

this also work with bios 1.4 (as that was my orriginal mobo bios, but i downgraded due raid problems with 1.4).

2909mhz was 3hours prime stable

2890mhz was prime stable 12+ hours

vlad
04-01-2005, 06:32 PM
Very nice. Ill have to try that. :up:

rzonealley
04-05-2005, 05:57 AM
really frustated with my CBBID 0451MPM the highest i could get is 278x9 @ 1.7volt.
anyone with same stepping could do higher here?

vlad
04-06-2005, 01:03 AM
really frustated with my CBBID 0451MPM the highest i could get is 278x9 @ 1.7volt.
anyone with same stepping could do higher here?

That seem to be around the max for CBBID's. :(

rzonealley
04-10-2005, 10:31 AM
That seem to be around the max for CBBID's. :(

maybe its time for me to wait for venice. :D

Blue078
04-21-2005, 04:38 PM
3200+ CBBID 0509CPLW
Cheep water cooling

Primes @2400 stock voltage. It gamed for about 45min stock voltage @2500, but SuperPrime failed within 10 mins. Ive stayed at 2500 for now and uped the vcore to 1.45 seeing how long prime lasts now.

vlad
04-21-2005, 04:59 PM
maybe its time for me to wait for venice. :D

Yep! Thats what I'm wating for. ;)

nfm
04-29-2005, 12:39 PM
Not bad, right? My oced rig with crappy GEIL PC4000 ram :slapass: at drr550 :D
I believe i got CBBID winne, not sure. I lost IHS

http://img.photobucket.com/albums/v298/Kapucyn/Pic002.jpg

Ram is holding me back, but I'm happy with the oc :toast:

Moonman
04-30-2005, 02:55 AM
http://img229.echo.cx/my.php?image=30755rn.jpg
link (http://img229.echo.cx/my.php?image=30755rn.jpg)

This is my max with water cooling. Ambient @ 22 C.

Edit: Added link to IS.

FiNcH64
05-01-2005, 09:16 AM
hi guys

well this the oc 100 % stable i reached , cause it seems that its the top of this winnie or maybe not??

cause i put it more voltage even up to 1.85 and can't stable it, the mems are stable cause i use prime 95 on memos and they can reach 245 at 3.2 v

are the limits of my winnie 2.5 ghz??? cause i thought i could have it 2.7 but anything above 2.5 with any voltage is not stable :confused:

my validation

http://valid.x86-secret.com/show_oc?id=15266

any help would be great http://valid.x86-secret.com/show_oc?id=15266

BigBen
05-01-2005, 09:27 AM
http://valid.x86-secret.com/show_oc.php?id=15241

tahuru
05-06-2005, 11:15 PM
Hello all ..

Here is my little oc adventure result with CBBID 0508 FPMW steppings.

http://img.photobucket.com/albums/v35/tahuru/A64/maxed_maybe.jpg

Watercooled with a Dtek WW, Eheim 1048 and Dtek Pro-120 Heatercore

Hopefully it will burn in so i can get 2.7Ghz

TheMask
06-13-2005, 02:06 PM
My CBBHD 0449MPM winnie 3000+ does close to 2800MHz.. But its Prime stable only till 2.55GHz..

http://img166.echo.cx/img166/8633/maskswinnie2792mhz5gp.jpg

Electroid
06-16-2005, 05:05 AM
3000+ winnie & water+peltier @ 3018MHz (http://valid.x86-secret.com/show_oc.php?id=23288) :D

http://www.kanetti.fi/~electroid/screenshotit/superpi/faior_winsu/faiors_058.gif
http://www.kanetti.fi/~electroid/screenshotit/superpi/faior_winsu/faiors_058.gif

Not by cpu btw :|

alexgontijo
06-19-2005, 08:33 PM
Guys,

I need some advices on my overclocking.

I'm using my system at 246x10 = 2460 MHz, 166 divider, resulting in 205 MHz at 2-2-2-5. The system is fast with this speed, Primed, OCCT passed, etc..., and the vcore is 1.52v.

So I tried 240x10 = 2400 MHz, with the memory 1:1 in 240 MHz at 2.5-3-3-6 (I did 4 loops in Memtest, ok for that speed) but I've tried a lot of different vcores and the CPU is unstable. It can't run 2 minutes on Prime, locks on games, totally unstable. I tested vcores from 1.4-1.6v and nothing!

What might be happening? Why did the CPU can handle 246 but can't 240? My HTT is configured to 4x, and I don't know what else I can try. I'm using BIOS 1.8mod.

Does anyone have any idea?

Thanks a lot!

AleX

jjcom
06-19-2005, 08:47 PM
Very good chance it's your RAM. Memtest doesn't always mean that your computer will be stable at that speed. Back off on your RAM bit, and have you tried more volts to your RAM?

jjcom

chainhoe
06-20-2005, 06:39 AM
i'v been wondering, does Winchester have cold bug or not? and if yes, how low-temps can i run it?

Marvin
06-20-2005, 08:42 AM
yes, the winchester does have the cold bug, but i dont know if all of them have.
i guess you may have problems... ;)

alexgontijo
06-20-2005, 10:21 AM
Very good chance it's your RAM. Memtest doesn't always mean that your computer will be stable at that speed. Back off on your RAM bit, and have you tried more volts to your RAM?
jjcom

Hi,

I've tried 2.8v but didn't help anyway. 240 - 2.5.3.3.6 passes ok with 2.7v and 2.8v. So I left it on 2.7v.

I also think that could be my RAM too, because I can't go like 220 MHz at 2.2.2.5, I don't know if this 3200XL likes much voltage or not, but I haven't test beyond 2.8v. Any tips? My maximum vram in the Neo2 its 2.85v...

Thanks!!

AleX

vlad
06-21-2005, 02:55 AM
i'v been wondering, does Winchester have cold bug or not? and if yes, how low-temps can i run it?

Some do some dont or should I say Most do. It sucks because I have two that clock real good on air (xp90), one of which will boot 2907mhz (NOT stable) but is bench stable @ 2885mhz. I've thought about hooking it up to my chiller and slowly bringing the temp down to find the limit but havent had the time.

BerT
09-13-2005, 12:59 AM
Best BIos for winchester on NEO2 ?

S!1v3rB@cK_Dk
10-15-2005, 06:33 AM
Best BIos for winchester on NEO2 ?

Hmm, I have tried a lot of em, and I can recommend 1.41 beta or as I am using now, the v1.8 official which I think is the most stable and gives the best OC.

caRpetbomBer
10-17-2005, 08:55 AM
is the stepping of this cpu any good.
i can get one pretty cheap. Or should i not waste my time.

ADA3000DIK4B1
CBBHD 0447RPMW

caRpetbomBer
10-31-2005, 07:13 PM
My Oc results so far for the cpu stepping posted above are.
2.3ghz on stock vcore and stock heatsink and fan. :slobber:
Ill get a better heatsink and fan soon time. Also better ram.
I want to see what this cpu can do.

TheMeatFrog
10-31-2005, 07:38 PM
is the stepping of this cpu any good.
i can get one pretty cheap. Or should i not waste my time.

ADA3000DIK4B1
CBBHD 0447RPMW
Should be a good one as far as winchesters go. :) GL :toast:

sinister1st
10-31-2005, 08:40 PM
Bringing back the good ol winnies? Too bad I lost most of my pics :confused: but back when I was using mine it would do right under 2.6 24 hr prime stable. Heres the only pic I have left on the 9 multi. (remebering at the time I was seeing how far my gskill could prime for 24 hrs :) )

24 hr prime stable 2.5ish on air. 288x9 was max prime 24 hrs with a little more volts on my trusty neo2 wich Im still using with my X2 4400@2.7 :toast:

Kallenator
11-01-2005, 11:17 AM
Hello XtremeSystems Forum, my first Post this is ;)

This is my max Mhz on my Winchester not stable on SuperPI.
I tried to get it over 300HTT but that was no go.

*Water with Window up*

Cuplex Pro, Dual 120mm Rad, Eheim 1048.


300*9=2700Mhz 1.6V+ (CBBFD 0437VPMW)
166 3-3-3-8 2.85V
http://www.kirkedam.mine.nu/kwk/Data/Overklokking3Dmark/CPU166divider3000winnivinduoppeh20300fsb.JPG

RAM is set on crap mode just to get high HTT.

http://www.kirkedam.mine.nu/kwk/Data/Vannkj%c3%b8ling/PICT1179.JPG

Aprox Temps

Around the computer=12c
CPUtemp=10-15c
Ramtemp=10-14c
Outsidetemp=1,6C
Watertemp=12c

Not all temps are Accurat.

chainhoe
11-01-2005, 02:37 PM
some Winchesters just wont do 2700mhz. you could try lowering voltage, as some Winchesters dont like voltage 1.6 and up.

[XC] DragonOrta
11-05-2005, 02:30 PM
I can get the winnie that I just bought from Mad Mikee up to 2.8ghz at 1.62v. I'm not sure of the stepping, because Mikee said he sent me an IHS from a different CPU. I haven't taken the time to try SPi 32m, but it's completely D2ol stable. Been running D2ol at this speed for 5 days straight.

idanp
12-27-2005, 09:02 AM
This stepping is good? what the maximum that I can arrive with it?
CBBHD 0450wpaw
winchester 3000+
now i'm stable at 2520 315X8 1.5V
and this is the best(stable) that i can do with my motherboard for now
(GB K8NF-9, soon DFI lanparty ultra-d)

DFI pit bull
02-07-2006, 06:53 AM
Have a look below.


http://cgi.ebay.co.uk/Athlon-64-3200-Unlocked-Multiplier-Engineering-Sample_W0QQitemZ6846522874QQcategoryZ80139QQssPage NameZWDVWQQrdZ1QQcmdZViewItem

e-jump
02-10-2006, 12:17 AM
er, are all the winnies still alive? :D

ok, anyone with winnie able to run 2x1gb sticks beyond ddr520?
i tried my 3000+ winnie on both neo2 plat n ep-9nda3+, my rams cant go beyond ddr520..

this same ram on newer system i see [venice,opty, nf4 boards] able to do ddr560 easily..

so i wanna know whats my limiting factor here..
izzit my winnie, or the nforce3 boards :(

-----------------------

ok, juz checked my bios...
probably winnie's mem controller cant handle 2gb at high htt

@htt255
http://img142.imageshack.us/img142/749/htt2555nu.th.jpg (http://img142.imageshack.us/my.php?image=htt2555nu.jpg)

@htt256
http://img142.imageshack.us/img142/5497/htt2560wz.th.jpg (http://img142.imageshack.us/my.php?image=htt2560wz.jpg)

heard same probs with another winnie user with pqi 2gb kits stuck at ddr480

will try a venice to confirm this ;)

Jochenp
04-14-2006, 08:20 AM
Yeeeej, got watercooling today, raised my prime stable overclock on my 3200+ winny from 2450mhz@1.5v to 2700mhz@1.63v ! :D

pik-ard v1.1
05-16-2006, 10:33 PM
DFI Lanparty Ultra-D
3200+ @ 10x267.9 = 2.68GHz
CBBID 0502APMW
1.5V x 1.1% = 1.65V in BIOS
air cooling: XP-90
UTT @ 243.6 2-2-2-6 1T
Vdimm @ 3.5V

me :: thread
:stick:

HighLife
06-28-2006, 12:06 PM
I have a 3200 winchester and was wondering something...

I can run it either way, but one is prime stable and the other is not im wondering why cause to me it looks to be the same.

240x10 =2400mhz, ram at 240..this does not prime more then about 10mins.

253x9.5 =2403, ram at 240.. this does prime *Ram is set to 1:1, but uses divider cause of .5 multi*

Now, am i crazy...why does my ram do 240 when its on a divider and not when its 1:1?

Explain to me why one works and the other doesnt. I mean the to me, the ram in both are running 240, and the cpu is 2400.

ZL1Killa
10-06-2006, 05:15 AM
3500+ winchester
MSI K8N neo2 platinum
OCZ bh5 pc3200 sticks
Thermalright XP-90 w/92mm tornado (yes, its noisy. i don't run it at full blast)
OCZ 520W psu
thermaltake armor (black) case

running memory at 3.4v 2.5 2 2 8 @ 250 x 9.5 = 2375
cpu is at 1.49v

going to try for more here soon, this is just what i started playing with.

Asazman
12-03-2006, 12:12 PM
3500+ winchester
MSI K8N neo2 platinum
OCZ bh5 pc3200 sticks
Thermalright XP-90 w/92mm tornado (yes, its noisy. i don't run it at full blast)
OCZ 520W psu
thermaltake armor (black) case

running memory at 3.4v 2.5 2 2 8 @ 250 x 9.5 = 2375
cpu is at 1.49v

going to try for more here soon, this is just what i started playing with.

that is my same setup :cool:

gj

SOLDNER-MOFO64
01-26-2007, 02:28 AM
This was the most I could pull from my 3500+ Winny under water :)

Loose memory at the time.......28second 1M Pi was my fastest with this cpu.

Dublin_Gunner
02-19-2007, 08:35 AM
My poor Winnie 0502GPFW wouldnt go above 2.4Ghz no matter what I did :(

even on Ultra -d with any voltage (tried up to 1.62, didnt wanna go further)