PDA

View Full Version : Official Winchester OC Thread!



Pages : 1 2 3 [4] 5

skematix
01-31-2005, 09:37 AM
not sure but alll i know anything with 0447 is good.....i have that stepping....able to do 2.52Ghz 1.4vcore prime stable

sapmig
01-31-2005, 10:27 AM
http://sapmig.no.sapo.pt/30.JPG

Stock cooler.
A8N-SLi
PDP 3200XBLK (TCCD)

K32A
01-31-2005, 12:10 PM
sapmig Nice overclock! :P

d@rkn1ko
01-31-2005, 12:17 PM
what is the week?

boblemagnifique
01-31-2005, 12:25 PM
Hey guys. Hope you can help me a little...

I have just got an mail from my local store, that the next sending of 3000+ Winnys, is with the newest steppings, do you know if thats good or bad?

EDIT: How about this 0449gpgw - is it good or bad?

My 3000+ cbbhd 0449 gpgw -> BOX AMD -> Tower outside 0°/-1°

Max superpi (1.7v bios)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0449gpgw/superpi29s.PNG

Max screen (1.7v bios)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0449gpgw/winnie@2885mhz.png

max stable 2650/2700mhz a 1.7v i think

K32A
01-31-2005, 01:05 PM
boblemagnifique - Thanks alot!

Thats an great oc, looks great! Maybe i'll buy one of those ;)

boblemagnifique
01-31-2005, 01:12 PM
boblemagnifique - Thanks alot!

Thats an great oc, looks great! Maybe i'll buy one of those ;)

for me this cbbhd 0449 is average, my 3200+ cbbhd 0447 tpew do better (stable 2600mhz has 1.4v, max benchs has 2981mhz has 1.65v with the box amd ) but good there is worse, now i await one 3000+ cbbhd 0448 spaw (best the step of the 3000+)

sonicDivx
01-31-2005, 01:18 PM
3000+
0441 UPEW
XP-90
MSI Neo2 Plat. 1.4 bios
PDP pc3200 XBL
The ram is interesting, I can run 2.5-3-3-10 up to 283MHz, but I can't run any tighter at 241MHz.
31s 1M, 27:57 32M Pi times, and of course, a screenie:


Kueller,

I have a very similar setup, but can get my voltage anywhere near what you run your cpu at( I'm higher ). What is serial on motherboard. I'm thinking 0440 just need more juice. Also what Fan do you have on you XP-90? I'm running 1.36B Bios. I have tried lower voltages and just am not stable 100%

My memory also has about the same limits 2.5-4-4-10 at 282. Oh what are your A64 settings for 183Mhz.

Gack ZipZoom, sold me old stuff and here I bought in Dec. I firmly believe new steppings and serial on CPU and Mbd are key to getting higher OC with lower voltage.

Thanks
Kevin

K32A
01-31-2005, 01:19 PM
for me this cbbhd 0449 is average, my 3200+ cbbhd 0447 tpew do better (stable 26000mhz has 1.4v, max benchs has 2981mhz has 1.65v with the box amd ) but good there is worse, now i await one 3000+ cbbhd 0448 spaw (best the step of the 3000+)


Yeah, we all want the 0448 SPAW :D

boblemagnifique
01-31-2005, 01:24 PM
Yeah, we all want the 0448 SPAW :D

yes I have to seek during a few weeks and a friend will take some tomorrow, one will vera what that gives (some are good and different average = 2450mhz stable max has 1.4v and different 2700mhz stable max has 1.4v, it is the lottery these winnies :(

sapmig
01-31-2005, 02:29 PM
my its cbbhd 0450spbw

DoberMan
01-31-2005, 05:12 PM
I´ve got one cbbhd 0450spbw also. I´m waiting for MB, if mine overclock so well like Yours, i will be very happy and we ppl can rely on sttepings. If not, i think we must stop thinking about sttepings, at least for these A64.

TheMeatFrog
02-01-2005, 12:02 AM
Replacing my 0437 with a 0450 was the best thing I've ever done. The week 50s seem weaker than say 47-49s but they are still doing 2.6-7. When I got my first winnie(the week 37) I said I would be happy with 2.6 and it wouldn't do anything over 2.5 but my week 50 has made me a very happy camper!
:toast: :banana:

sonicDivx
02-01-2005, 06:11 AM
Man,

My Winnie can seem to get that high on that low of voltage. have a 0444 on 0409 Serial Neo2. I end up needing 1.525+15% to get 298Mhz. Wonder If just luck of draw or need to reapply AS5 compound or I just cranked it up too soon after getting. Gack I wish I could use less voltage.

TheMeatFrog, what settings do you have your memory at?

TheMeatFrog
02-01-2005, 09:34 AM
It's running with a 166 divider at 250MHz 2.5-3-3-7 timings w/2.75v.

sonicDivx
02-01-2005, 09:47 AM
ahh, ok. That is what I am running now. What bios ver. you using? Trying to find other with Patriot memory is tough. Been looking for A64 Tweaker settings that seem to work well so don't have to reboot alot (lazy :D)

FX Freak
02-01-2005, 09:51 AM
so, today i get a 3200+ winchester 0447spaw:)
had anyone here some oc results with this stepping?

d@rkn1ko
02-01-2005, 09:56 AM
0447 is good step :toast:

FX Freak
02-01-2005, 10:06 AM
some oc results????????
my 444xpew is benchstable up to @2,7ghz with 1,7v

kakaroto
02-02-2005, 08:06 AM
I will get the 0501 FPMW. A good stepping/week? never see this week and stepping on XS, must be a very new one.

This CPU will be first on air and then Mach 1 R507. :)

$0m#0n#
02-02-2005, 09:46 AM
I will get the 0501 FPMW. A good stepping/week? never see this week and stepping on XS, must be a very new one.

This CPU will be first on air and then Mach 1 R507. :)
Just one month old :) wish ya luck. What is written after the week?

kakaroto
02-02-2005, 09:51 AM
Just one month old :) wish ya luck. What is written after the week?

CBDED, unknow to me :P

Jort
02-02-2005, 01:01 PM
do i become xtreme?

i reached 2810 mhz with "just" watercooling (all own made)
i've got screen from 2799 and 1.6Vcore (just to be sure i can manage 2.8)

http://users.telenet.be/jortcollijn/kaboem.JPG

then i tested the max fsb of my mobo.
could reach 335 and 345 was bluescreen :p:

http://users.telenet.be/jortcollijn/screen1.JPG

CP-Geek
02-02-2005, 01:14 PM
My 24/7 settings HERE (http://www.oc-papat.com/cp/pics/247.gif).

funkflix
02-02-2005, 01:16 PM
My 24/7 settings HERE (http://www.oc-papat.com/cp/pics/247.gif).

1,77V? What cooling do u use?

sevenka
02-02-2005, 02:02 PM
EDITED:

Link Removed. No Spamming Allowed.

Jort
02-02-2005, 02:28 PM
are you kidding :slobber:
can you translate it :p: :D

CP-Geek
02-02-2005, 03:46 PM
1,77V? What cooling do u use?

Water, CPU's at 21'c idling, on few hours Prime it can get to 33-35. I like winters... (Radiator's outside, temps are
here (http://www.oravaistemperature.com). :banana:

flexy
02-02-2005, 07:15 PM
hi, i posted in the xtreme overclocking forum
http://www.xtremesystems.org/forums/showthread.php?t=52104
and have a question whether its true that a higher multi== higher memory bandwidth. Thanks !

short:
My assumption was always it doesnt matter what multi as long as i can hit the max. CPU speed as well as the max memory speed. Where does the multi come in play there ?

Interloper_PL
02-03-2005, 01:01 AM
Here are my results:

A64 Winchester 0,09um Socket 939 3000+ 1800mhz (9x200)

All From 50 Week (0450)

1# UPBW 0154 2600Mhz (4000+) 1.4V | 2700mhz (4300+) 1.5V |
-> http://members.lycos.co.uk/obligator/Allegro/A64/1.4%202600%200154.JPG

2# WPBW 0074 2700Mhz (4300+) 1.425V |
->http://members.lycos.co.uk/obligator/Allegro/A64/1.4v%202700%200074.JPG
-> Short movie made by Canon G2 poor quality :/ (Finishing SPI 16M) http://members.lycos.co.uk/obligator/Allegro/1.425v%20Magic.zip

3# WPBW 0083 2600Mhz (4000+) 1.4V | 2700Mhz (4300+) 1.5V |
->http://members.lycos.co.uk/obligator/Allegro/A64/1.5v%202700%200083.JPG

4# WPBW 0077 2600Mhz (4000+) 1.35V | 2700Mhz (4300+) 1.45V |
-> http://members.lycos.co.uk/obligator/Allegro/A64/1.35v%202600%20077.JPG
->http://members.lycos.co.uk/obligator/Allegro/A64/1.45%202700%200077%203dm.JPG

5# WPBW 0080 2600Mhz (4000+) 1.45V | 2700Mhz (4300+) 1.55v |
->http://members.lycos.co.uk/obligator/Allegro/A64/1.45%202600%200080.JPG
->http://members.lycos.co.uk/obligator/Allegro/A64/1.55v%202700%200080.JPG

6#WPBW 0076 2600Mhz (4000+) 1.45V | 2700Mhz 1.55V Unstable.
->http://members.lycos.co.uk/obligator/Allegro/A64/1.45%202600%200076.JPG

7#WPBW 0078 2600Mhz (4000+) 1.45V |2700 Mhz 1.55V Unstable.
-> Results Soon.

All of them SPi 16M, 3DM 2005, 3DM 2003 Full Stable. Cooled by Zalman 7000Cu (High)

Test Settings:
Usually 9x300 HTTx1 1:1 (2700mhz) Cl 3-4-4-7 and 8x325 HTTx1 5:6 (2600mhz) Cl 2,5-3-3-6

saaya
02-03-2005, 07:43 AM
hey interloper, welcome to XtremeSystems :D

Jort
02-03-2005, 11:05 AM
pm send saaya ;)

PCcrazy
02-04-2005, 03:15 AM
my first post here..and my first attempt on AMD64 winchester core...
before this im on p4 platform...btw the RAM is holding me down...
at 265 fsb the RAM give errors....

265 @ 2.5-4-4-8 2T ...failed prime but it is still benchable...
my RAM can do max 257 @ 2.5-4-4-8 prime stable...

but now running the system at (look at my sig)..
the RAM is faster @ 232 @ 2.5-4-4-8 1T...

So now im looking for TCCD to optimize my system...
yet to know max clock speed of my couple of days old winchester..

FYI this is using stock hsf

and last but not least..hi everybody
:)

JIGEN
02-04-2005, 08:53 AM
I'm new to this and want to ask a few questions:

Its definately gotta be winchester 3000+ but which Mboard? IS it MSI Neo plat 2? cuz i heard it dosent have a pci lock will this mean that pci slots will have to be kept empty? however the Abit uguru AV8 has lock AGP & PCI but leaky caps or summith,I Wanna know why you guys dont like the abit as it could be interesting to learn why.
it would be nice to have a structured reason for an explanation. Thanks

NiSMo
02-04-2005, 09:37 AM
welcome to the forums guys :),

all nforce3 boards have a pci/agp lock, and the reason that most ppl choose nvidia chipset is because they have a better chance of getttin a higher HTT (fsb if u wanna call it that) than the via (abit av8, asus a8v etc.) boards do....

hope that helps :)

vkbms
02-04-2005, 11:44 AM
Winny 3000+
Msi K8n Neo2 1.36b
2*512 Vitesta ddr600
Water Cooling (K10 Hurricane by Pctuner)

http://img215.exs.cx/img215/7181/28960io.jpg

Adasi
02-04-2005, 03:10 PM
Why did you set your ram asynchro?
Nice o/c :)

Riverna
02-04-2005, 05:05 PM
first testing with my new 3000+ 0445 SPMW

http://www.forumdeluxx.de/gallery/data/500/888627001.JPG

|SiLA|
02-04-2005, 07:13 PM
here's mine 3000 0447 look also at that 1200HT speed on my DFI nF4 SLi-DR ;)

http://silveralien.altervista.org/new/4x2.JPG

NiSMo
02-04-2005, 07:34 PM
here's mine 3000 0447 look also at that 1200HT speed on my DFI nF4 SLi-DR ;)



wat stepping is ur cpu ?? cos i got a 0447 UPDW and max out at 2.6 wit 1.525v

vkbms
02-05-2005, 01:19 AM
Why did you set your ram asynchro?
Nice o/c :)

It's only a screen :D ...so i've set ram in asynchro to be sure that they don't give me problem....

Have u understood?

PS: Sorry 4 my English

|SiLA|
02-05-2005, 02:20 AM
wat stepping is ur cpu ?? cos i got a 0447 UPDW and max out at 2.6 wit 1.525v

stepping the same of the rest D0 :p but here's the 4 letters after the week
0447 RPDW :banana:

kakaroto
02-05-2005, 03:14 AM
My MSI NEO4 Ultra with 3000+ CBBID 0501 FPMW batch 618 is a bummer.
when I set 200MHz to 220MHz or higher is won't boot. Even with 250x7!!

same for windows with clockgen...

Is this a CPU or Mobo problem?

I can get this one too:

CBBID 0451APBW
1168678L40001

A nice one??

A_X
02-05-2005, 05:50 AM
I've sort of got the same problem... When I set the HTT to 220 - 225 or higher in the bios it won't boot at all.... But When I overclock it with Clockgen I can get it stable on 9*283, 1:1_2.5-3-3-7-1T.

MSI K8N SLI Platinum.

idleuser
02-05-2005, 11:18 PM
I have an A64 3000+ 0444UPAW overclocked to 2.6ghz 290x9 with a msi neo2 platinum. I am able to boot into windows at 2.7ghz but I haven't tried higher because I'm afraid it might mess up my system. It's PI stable at 1m 2m and 4m but not PI stable at 32MB. Primestable as well but locked up both time at 3hour 3min and 33sec with the 3 runs I ran @ 2.6ghz So either prime doesn't like cpu or it could be a concidence that it died all 2 times at the same hour same min and same second. I am able to CS no problem.

Riverna
02-06-2005, 04:33 PM
http://www.forumdeluxx.de/gallery/data/500/8886superPI.JPG

I have listing to music therefore is the time so bad. The memory runs normally with 300fsb. The new run with 300fsb comes tomorrow.

Ferry82
02-07-2005, 05:00 AM
I´ve got one cbbhd 0450spbw also. I´m waiting for MB, if mine overclock so well like Yours, i will be very happy and we ppl can rely on sttepings. If not, i think we must stop thinking about sttepings, at least for these A64.

how is it doing i can get the same stepping?

stestan
02-07-2005, 10:39 AM
I can get this one too:

CBBID 0451APBW
1168678L40001

A nice one??

I have 3200 939 with that exact stepping sucks big time 2.55 max :stick:

Thats just mine but i hear a few thats got :banana: :banana: :banana: :banana: 0451

Riverna
02-07-2005, 07:12 PM
Update

http://www.forumdeluxx.de/gallery/data/500/88862703.JPG

Riverna
02-08-2005, 02:56 PM
http://www.forumdeluxx.de/gallery/data/500/8886diedrei.jpg

3200+ SPMW 0433 @ 2763Mhz 1.58V
3200+ MPMW 0441 @ 2650Mhz 1.56V <--- on the test run
3000+ SPMW 0445 @ 2718Mhz 1.50V

A_X
02-08-2005, 03:06 PM
http://www.forumdeluxx.de/gallery/data/500/8886diedrei.jpg

3200+ SPMW 0433 @ 2763Mhz 1.58V
3200+ MPMW 0441 @ 2650Mhz 1.56V <--- on the test run
3000+ SPMW 0445 @ 2718Mhz 1.50V
How about you sell that 0433 to me? :)

Adasi
02-08-2005, 03:10 PM
Riverna tell us some more. What cooling on what board etc... Thx

Riverna
02-08-2005, 04:28 PM
Cooled by water. MSI K8N Neo2 and 2x 256MB PC4500 A-DATA 1:1. The 3000+ and the SPMW 3200+ are without the spreader. The other 3200+ run with spreader.

The 3000+ works in my system and the 0433 is selling.

sr4470
02-08-2005, 04:31 PM
Heres my new oc, im back after a lil time away from the forum. Damn this PSU, whoever mentioned it as the weak point, you nailed it, im feel kinda gutted that i didnt pay another £20 for a 550W+ PSU :mad: But i'll try again when i get a new HDD and slap in my ol' 9600 instead of this power-hungry 6800GT.

Edit: its SPMW0445, and the checksum got messed up because i opened the 2nd copy of cpu-z while the first was on the memory tab. or something. but i can assure you the ram was running 233mhz (maxes out at 271 but mem controller or board doesnt allow above 250 1:1). And why does the NB fan slow down when im running corecenter? perhaps that why it crashes the system after a while? it'd be nice if i could actually control it with this 1.5X bios but ive tried all 3 settings to no avail.

kakaroto
02-09-2005, 05:35 AM
well, tommorow i will get another 3000+

CBBHD 0443 MPM ..... 172

Hope this will be a descend clocker. what do you think?

Riverna
02-09-2005, 05:38 AM
well, tommorow i will get another 3000+

CBBHD 0443 MPM ..... 172

Hope this will be a descend clocker. what do you think?

Yesterday i have testet a 0441 MPMW ... 146. With hs the cpu runs on 2650mhz 1.56v stable.

kakaroto
02-09-2005, 05:45 AM
Yesterday i have testet a 0441 MPMW ... 146. With hs the cpu runs on 2650mhz 1.56v stable.

thats quite nice dude :)

BeachKEN
02-09-2005, 06:14 AM
My 0450UPMW number: 40022 runs at 2.6GHz (10x260) runs stable at 1.5V real!!! (SuperPI finished couple of times OK, Prime 9 hours)

But my Muskhkin LVLII V2 (TCCD) seems to be like brakes for my CPU :wierd: (260 CL2.5 4-4-11-1T 2.8V - more V doesn´t help)
I will try to set CL3 to try 3GHz :D

Riding on nF4Ultra-D mobo

A_X
02-09-2005, 09:11 AM
well, tommorow i will get another 3000+

CBBHD 0443 MPM ..... 172

Hope this will be a descend clocker. what do you think?
I have a 0436 MPM 051 which only does 2550...

kakaroto
02-09-2005, 09:27 AM
I have a 0436 MPM 051 which only does 2550...

well, hope that this one will do better then that. Nothing is garanteed.

spajdr
02-09-2005, 04:08 PM
ADA3200DIK4BI
CBBID 0501CPMW
1126655A50101

Epox 9NDA3+

So far 10x250 PI stable with 1.45V
more update later cause im tired :)

Feinripp
02-10-2005, 02:37 AM
CBBGD0440SPAW 3000+ Winnie here..
Mobo Neo Plat. Korea,
Cheap RAMs TakeMS 2x512MB
I can reach 2430 Mhz 9x270, @RAMdiv. 166 (~225Mhz) Primestable.. at 1,45 V.
45 ° under load..
Funnny: i am not able to add 5 Mhz more although with Ramdivider @133 or even 100 the sys faults with Superpi at every HTT over 270 Mhz.
Booting possible @9x300 Ram @100 but crashes in Pi..
Playin´ with Vcore/Vdimm makes no difference, also switching down RamDivider makes no difference.
What do you guys think, is the cpu limiting or could it still be the crappy Ram? Something like incompatibility between my RAM Mobo CPU?
Makes it sense to invest in some gskill rams or would you skilled peops say, forget it your CPu is almost squeezed out?

Thx
Edit typo..

setyotomo
02-10-2005, 03:32 AM
mine on stock HSF

3200+ 0451 APMW ( i guess - forgot to take pics first - LOL :p: to exited about the board)
TwinMOS 512x2
DFI NF4 Ultra D bios 1/25
Unmodded Antec 430 W PSU ( i should mod this one i guess :p: - look at the 12+ rail :D :D)

http://img201.exs.cx/img201/9853/30sfulllow9yy.jpg

haha need 1.7v just to get 2.6 gig ... :stick:

stestan
02-10-2005, 08:16 AM
Wow another sucky 0451 :rolleyes: seems to be a trend :stick:

I just ditched my 0451 apbw did 2.55 max @ 1.7v :eek:

Got a 3000 spaw will update results later

A_X
02-10-2005, 08:17 AM
Hmm somebody offered me this one today:

ADA3200DIK4BI
CBBHD 0449GPHW
1169847L40080

CBBHD, low batch nr. Very tempting...

Hombre
02-10-2005, 11:36 AM
I say get it :D

setyotomo
02-10-2005, 11:48 AM
should i got this one for replacement?

it's

CBBFD 0435TPMW

http://www.newegg.com/app/Showimage.asp?image=19-103-500-01.jpg

TheMeatFrog
02-10-2005, 12:34 PM
should i got this one for replacement?

it's

CBBFD 0435TPMW

http://www.newegg.com/app/Showimage.asp?image=19-103-500-01.jpg
If your getting that replacement from newegg it won't be a 0435. That's just the picture they used. You will probably get a 0450 or later depending on what warehouse they ship it from.

vlad
02-10-2005, 01:58 PM
0451 according to flask28.

http://www.xtremesystems.org/forums/showthread.php?t=52840

Feinripp
02-10-2005, 02:58 PM
This one ownes me..
ADA3000DIKBJ
CBBGD0440SPAW
1121719J40031

cant reach 2500Mhz.
Low Batch, SPAW this thing must go..
:bsod:

A_X
02-10-2005, 04:34 PM
Is that a typo or is it really a GBBGD?

sr4470
02-10-2005, 04:55 PM
Need a new psu, 12v is sagging...

chew*
02-10-2005, 08:47 PM
I can get 2.4 stable with 1.6 volts but thats the end of line.
k8ns ultra 939
2x256mb mushkin pc 3200 lv 2 (2.8v)
9800pro(softmod gigacube samsung E die bios)
a64 3000 winnie(1.45v) Its a winnie but not a winner :(
http://members.cox.net/wmdieselmc26/2300mhz.bmp

Chr0n1c
02-10-2005, 08:55 PM
well, tommorow i will get another 3000+

CBBHD 0443 MPM ..... 172

Hope this will be a descend clocker. what do you think?

A friend of mine has an 0443. He's in the 2.7Ghz range with low volts (1.5Vish)

Jethro
02-10-2005, 09:35 PM
just ordered retail 3200+ and Giga K8NS ultra! (newegg) I will be watercooling that bad boy somehow! wish me luck!

Feinripp
02-10-2005, 11:37 PM
Is that a typo or is it really a GBBGD?

No typo ..checked twice its really CBBGD. Why you ask?

kakaroto
02-11-2005, 06:57 AM
CPU: 3000+ 0443 MPM
MOBO: NEO4 Ultra (1.3B)
MEM: 2x512MB GSKILL PC4400 (431) 2.75v
COOLING: BOXED

http://www.xs4all.nl/~famchow/A64_3000_winnie/2.7GHz_boxed.JPG

:cool: :cool:

perry_78
02-11-2005, 09:05 AM
Damn.

My CBBHD 0446 SPAW (x5xx) doesnt look too good :(

~2300mhz

I think this is stable, though not sure yet, have to flash the new DFI BIOS.

http://www.overclocking.dk/img/users/36815_02.jpg

My Gskill LA does 2,5-4-3-7 DDR600 though :D 1GB kit..

A_X
02-11-2005, 09:11 AM
No typo ..checked twice its really CBBGD. Why you ask?
No reason, just suprised that an SPAW with a batch that low performs so badly...

Oh and the store where I wanted to get my 0449GPHW already sold it... :( So I got myself a 0446XPAW. No idea if it is any good tho... Was a bit of a gamble. It should arrive on monday...

setyotomo
02-11-2005, 09:21 AM
Winchester 3000+
CBBID 0502 APMW

http://img228.exs.cx/img228/7352/3000saktijugaapmw8iz.th.jpg (http://img228.exs.cx/my.php?loc=img228&image=3000saktijugaapmw8iz.jpg)

Mem : 256x2 Corsair XMS 4.1 (TCCD)
Cooling : Stock HSF

http://www.xtremesystems.org/forums/attachment.php?attachmentid=24429&stc=1

not bad is it ?

Feinripp
02-11-2005, 03:17 PM
No reason, just suprised that an SPAW with a batch that low performs so badly...

Oh and the store where I wanted to get my 0449GPHW already sold it... :( So I got myself a 0446XPAW. No idea if it is any good tho... Was a bit of a gamble. It should arrive on monday...

i think its pure luck..hope your xpaw is a lucky draw..

it drivin me nuts..
Hm, possibly i have a problem with that cheap Rams i use. What if these Ram just dont like high divider (133/100) at high HTT´s I played around with the A64tweaker and the thing is: at memdivider 133, and also 100 the system refused to boot, so i bootet with 260x9 /ram on 166 divider save, and in windows i dropped the memdivider from 166Mhz to 150* reserved value. (whatever that means)
And then raised the clock up to 293 Mhz with clockgen. Now the ram runs @220 Mhz(upper limit of ram) 2640 Mhz 293x9.. stable at first look...
if i set 293 HTT, and divider 133 (should give around 190Mhz) in the bios .. the beast not even boots.
Now i must set manually all that stuff under windows to reach this clock..
:brick:
Looks llike the TakeMS Ram fooled me by not accepting lower dividers..seen that before? There is still light at the end, should i go for g.skilll rams?
:toast:

idleuser
02-12-2005, 02:54 AM
CPU: 3000+ Winnie 0444UPAW
motherboard: Neo2 Platinum
Memory: 2x256mb PQI Turbo 2.5-4-4-8 stable @ 1T (not stable at 2.5-3-3-7 @ 1T only at 2T)

Running 1:1 ratio with no divider DDR 570 Vcore 1.6v and prime stable for 22hours + Will do more testing but as of now it's still good to go.

http://img.photobucket.com/albums/v91/spyd3rman/overclocked1.jpg

kakaroto
02-12-2005, 03:20 AM
Mine 3000+ works under the prometia. :D

3000+ 0443 MPM
MSI Neo4 Ultra

temps windows -20C.

Alec
02-12-2005, 03:58 AM
24/7 rock solid settings :cool:

vlad
02-12-2005, 07:28 AM
Somewhat stable in windows but not bench stable. Needs more vcore, maxed out in bios but undervolts .1v, Need vcore mod or better mobo. Idle temp was 38c with around a 17c room temp. Max stable is 9x313htt so far. :)

http://members.cox.net/billz1rtc/9x323%20cpuz%20%20(Medium).jpg

Hombre
02-12-2005, 07:46 AM
I have a question:

My CPU is S&M stable @ 2640Mhz, but @ 2650Mhz it freezes after 7mins or so of benching.
At 2640Mhz the max temp is 56c, while in 2650 it goes up to 62c; So I guess that the meaning if this is insufficient cooling.

Do you think this is what's limiting me? If so I'll buy an XP-120.

vlad
02-12-2005, 07:50 AM
What are you using for cooling now?

Hombre
02-12-2005, 07:57 AM
Stock cooling w/ 1.5v + undervolting correction.
I forgot to mention that both of these clocks are 3d and Spi1m stable. 2650Mhz isn't stable through Spi32m, I'm getting the "NOT EXACT IN ROUND" message when encountering iteration 20. I really want an XP120 to give my CPU 1.6v action.

vlad
02-12-2005, 08:15 AM
I really want an XP120 to give my CPU 1.6v action.
That would be a good idea. My chip is oem so i dont know what the temps with the stock hsf but my 2800+ (754 socket) was retail and if my memory serves my right it would hit the upper 50c range around 2600mhz with the retail hsf. You should make up your sig so people can see what you have to better help you out. Good luck with it & post your results. :)

Athens[2004]
02-12-2005, 09:56 AM
1.36b msi k8n neo2 54g on search

vlad
02-12-2005, 10:06 AM
Hay Athens how stable is it at 2899mhz and how high does the vcore in 1.36b go?http://members.cox.net/billz1rtc/super%20pi%209x313%20cpuz%20(Custom).JPG (http://)

d@rkn1ko
02-12-2005, 10:55 AM
0448 spmw 1.4v epox 9nda3+ 2x256 mushkin level 2 3.4v box amd
stable 9*290 1.38v

http://membres.lycos.fr/m4inaction/A64%203000+%20cbbhd%200448%20spmw%201er/29cracked%20(Large).JPG

=[PULSAR]=
02-12-2005, 11:09 AM
d@rkn1ko 29s is pretty fast given those clocks how much tweaking did you do to your OS?

d@rkn1ko
02-12-2005, 11:11 AM
win xp pro +sp1

a64tweaker 0.50beta :toast: timming for bh5

Hombre
02-12-2005, 11:53 AM
That would be a good idea. My chip is oem so i dont know what the temps with the stock hsf but my 2800+ (754 socket) was retail and if my memory serves my right it would hit the upper 50c range around 2600mhz with the retail hsf. You should make up your sig so people can see what you have to better help you out. Good luck with it & post your results. :)

Thanks.

But do you think that the heat is limiting me? Last night for instance, my room temps were lower and I recall that my CPU passed S&M at 2650mhz. BTW, do you think that burn-in helps CPU's too?

Nice clocks there ;)

@ d@rkn1k:
Is that patched?

d@rkn1ko
02-12-2005, 01:09 PM
yes :D

30 no patched

vlad
02-12-2005, 02:09 PM
do you think that burn-in helps CPU's too?

Nice clocks there ;)

@ d@rkn1k:
Is that patched?

Yes i do. A week ago i couldnt boot any higher then 9x317 and it wasnt stable at all now i can work in windows but cant bench at 9x323. I know with more volts and better cooling i could get stable higher. I have a water block, mach1 and a chiller that does -50c but i want to see how high i can get on air first.
;)

chew*
02-12-2005, 02:29 PM
A week ago my highest stable was 2.4 at 1.6v after burning the hell out of the cpu im running prime now at 2.5 so far no errors last week at 2.5 error in 1 min. Maybe ill get lucky :)

Hombre
02-12-2005, 02:36 PM
Hehe thanks. I'll give mine 2-3 days of burning-in and then I hope for 2.7ghz (DoGMaN has the same CPU as mine and he reached 2700mhz using 9x300mhz, which is harder to get than 10x270 which is my aim) :p:

perry_78
02-12-2005, 02:51 PM
Yeah, burn in is nice! Mine stopped at 258*9 1,4, now its up to 268*9 1,4 Prime95 stable. Hell, those 9 hours of prime every day help ;)

d@rkn1k0 - I hate you :) Whats your bandwith with that? If SuperPi runs, so does Sandra ;)

kakaroto
02-12-2005, 02:55 PM
Here a small update:

http://www.xs4all.nl/~famchow/A64_3000_winnie/3000_mpm.jpg

MSI NEO4 ULTRA 1.2B

2700MHz @1.55v @BOXED AIR.

Under Prometeia MACH 1 R507 (DISPLAY= -43)

http://www.xs4all.nl/~famchow/A64_3000_winnie/Prime_2.95.jpg

This is prime stable, but my HTT is crap at that speed. Sometimes I get BSOD.

Athens[2004]
02-12-2005, 04:09 PM
Hay Athens how stable is it at 2899mhz and how high does the vcore in 1.36b go?

i have it 1 day[1.36b] only man still searching :) . . .

I need good memory to push my winnie above 2.8ghz@ 1.6vcore
my memory is noname 512*2 dual . at 210 craps , and 323htt hits the wall , no divider works ,,,....

at 2.9~ with my horrible sticks is only printscr stable :) :banana:

my winnie map is

undervolted[from bios] till 2.6ghz [1.37vcore 1.40]
default vcore[from bios] [1.44~] does 2.7ghz
and above 310*9 2790 ask to much [the memory i think ]

Chr0n1c
02-12-2005, 04:51 PM
Lots of great overclocks here. It's so intersting how much these chips can vary even on same week.

d@rkn1ko
02-12-2005, 05:15 PM
Yeah, burn in is nice! Mine stopped at 258*9 1,4, now its up to 268*9 1,4 Prime95 stable. Hell, those 9 hours of prime every day help ;)

d@rkn1k0 - I hate you :) Whats your bandwith with that? If SuperPi runs, so does Sandra ;)


I don't know I hate sandra :stick:

Riverna
02-12-2005, 06:39 PM
Yesterday i have buyed a new winchester. The stepping is 0448 rpmw. 2300 1.4v is prime stable more mhz is dosen´t stable. 2400Mhz 1.5v i become a error message after 15mins.

My friend has buyed a 0448 spaw and the cpu runs over 2,8ghz with 1.53v on prime. I hat this guy ^^

vlad
02-12-2005, 09:40 PM
http://members.cox.net/billz1rtc/9x314%20super%20pi.JPG (http://)

:banana: I finally broke under 30s. :banana:

legion
02-13-2005, 02:07 AM
Another from my week 48 SPAW on the DFI

http://img.photobucket.com/albums/v260/legion100/2800.jpg

Athens[2004]
02-13-2005, 04:23 AM
After hours of stress at 2.7 1.44vcore , my winnie now does 2.8 at 1.57~ vcore
[1.575 from bios]

the only part i miss is ocz el rev2 :banana: :banana4: :banana:

vlad
02-13-2005, 04:42 AM
Glad to hear it bro! :toast:

The Byter
02-13-2005, 05:04 AM
any faster winnie out there ?

http://www.xtremesystems.org/forums/attachment.php?attachmentid=24449&stc=1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=24518&stc=1

:toast:

Athens[2004]
02-13-2005, 05:08 AM
Glad to hear it bro! :toast:

Thanx mate :toast: :banana4: :toast:

a few answers now from your question about 1.36b.

1. I flash it from win [because im not trust my floppy] with no prob with winflash 1.0.0.1 [award]
2. 1.36b is more stable at high fsb .
3. It has new choises in vcore section . +13% +15% +18% !!!!
4. The bug from previous bios 1.4 we have that when you press enter 2 change multiplier the bios freezes [the only way was with pup pdown] is desapear .

and searching.

Athens[2004]
02-13-2005, 05:12 AM
any faster winnie out there ?



Outstanding :toast:

the vcore at cpuz is right :slobber: or shows slower ?
whats your memory ?

for air , or water you was previous whats the number of mhz bonus of the -60?

vlad
02-13-2005, 05:26 AM
any faster winnie out there ?

:toast: Very nice indeed! :toast: :slobber: Dame i may have to fire up my chiller sooner them i thought. Congrats again :up:

|Oc|REvO_HsArC
02-13-2005, 07:53 PM
']After hours of stress at 2.7 1.44vcore , my winnie now does 2.8 at 1.57~ vcore
[1.575 from bios]

the only part i miss is ocz el rev2 :banana: :banana4: :banana:

Cpu conditioning (burn in) works with a64 winchesters?

Jethro
02-14-2005, 08:40 AM
this just arrived!

ADA3200DIK4BI
CBBID 0501DPFW
1182947A50613

i hope its a decent one!

damsxx
02-14-2005, 02:43 PM
this just arrived!

ADA3200DIK4BI
CBBID 0501DPFW
1182947A50613

i hope its a decent one!

CBBID suXXXXX :bananal:

Jethro
02-14-2005, 04:36 PM
not sure so far 2.6 seems to be my ceiling testing now @ 277 x 9.5 1:1 4x HTT

CBI reports the chip to be .09 SOI?

Troll
02-14-2005, 11:23 PM
Sorry, I haven't read the whole Thread :bows:

Is there anywhere information about the best steppings for Winnies?
Thx!

Feinripp
02-15-2005, 01:04 AM
Yes i do. A week ago i couldnt boot any higher then 9x317 and it wasnt stable at all now i can work in windows but cant bench at 9x323.
...
;)

Interesting.. very interesting this burn in thing..

Th3__W00T_GuY__
02-15-2005, 05:00 AM
how do i burn in a winchester with msi k8n neo2 platinum and xp-120??

Alec
02-15-2005, 07:41 AM
2.7GHz Stable on Air... 1.6VCore
256MB of Corsair XMS3700 (2.5-3-3-10, DDR333)
http://subculture101.com/forum/attachment.php?attachmentid=34&stc=1

Jethro
02-15-2005, 07:56 AM
yeah so far 2.6 seems to be TOPS even with me cooling @ 18-20c. my max vcore is 1.7 with this board. at least it doesnt mind very high FSB's :D

Gauss
02-15-2005, 11:30 PM
What can be expected with an XP-90 with Tornado and a winnie 3500+ on an K8N Neo2?
My 3500+ is doing 2.62 GHz with 1.7v stable, is that nice?

FX Freak
02-16-2005, 05:17 AM
so today i get my new 3000+ 0443mpm
Ã:banana:´m very lucky with this little cpu:D watercooled

Alec
02-16-2005, 01:17 PM
New top SuperPi Scores. Beaten old scores by using longhorn!!! :D
Enjoy!

http://www.host366.com/pics/superpi.JPG

Alec

CP-Geek
02-16-2005, 01:22 PM
Not too shabby, if I may say it myself:

http://www.oc-papat.com/cp/pics/suppa_518.gif

MSI K8N Neo2 Plat. (3.3 Vdimm/Vio-mod, nothing else)
2x256Mb BH-5
Cold water.

And my 24/7 settins are HERE (http://valid.x86-secret.com/show_oc?id=2617). Straight from boot.

CP :)

=[PULSAR]=
02-16-2005, 01:28 PM
CP-Geek what week is that CPU?

CP-Geek
02-16-2005, 01:39 PM
I have no freakin idea. I polished HS when I got it. Afterwards I removed it. Just a piece of shiny copper now :D

CP :)

PS: Could I see it from some box-sticker?

BUGGI1000
02-16-2005, 03:17 PM
3000+ VPDW KW 50.

With AIR!!! (Nforce 4 GB)

2,7G @ 1,4V
2,9G @ 1,5V

BUGGI

kakaroto
02-16-2005, 04:01 PM
3000+ VPDW KW 50.

With AIR!!! (Nforce 4 GB)

2,7G @ 1,4V
2,9G @ 1,5V

BUGGI

may we see some screens? :)

pretty nice CPU

skinegibbs
02-16-2005, 04:19 PM
Well , this is my first time ever overclocking with help from one of the guys here. I posted what I saw the other guy post lol. If someone would like to help me do some more , I welcome you with open arms :D

EDIT: wtf..my MSI thing reads 295 while CPU-Z reads 283...weird.

http://img73.exs.cx/img73/899/untitled7aa.jpg

=[PULSAR]=
02-16-2005, 06:07 PM
skinegibbs I think that cpu might have a bit more left in it. Try using a lower ram divider and max out that cpu. :D

skinegibbs
02-16-2005, 06:36 PM
I'm still learning haha. I keep hearing about dividers and whatnot...I'm lost.


Im at 285x9 Idling between 37-41*C and peaking at 53*C with a heavy load. All on my XP-120 :D

Electric Bill
02-16-2005, 06:51 PM
Here you go

http://ebill.home.att.net/9NDA3/screenie_9x295.gif

Bill

skinegibbs
02-16-2005, 07:35 PM
Grr , I can't seem to get passed 285x9 =[

Alec
02-17-2005, 03:50 AM
Grr , I can't seem to get passed 285x9 =[
Have you got teh Abit AV8?
I had the same problem... Try lowering the LDT to x2; thatshould solve your problem.

Good luck!
Alec

kakaroto
02-17-2005, 07:45 AM
I get CBBHD 0447 UPCW 3200+

Think a good one? who has the same?

skinegibbs
02-17-2005, 09:06 AM
Have you got teh Abit AV8?
I had the same problem... Try lowering the LDT to x2; thatshould solve your problem.

Good luck!
Alec


MSI K8N Neo2 Platinum

kiwi
02-17-2005, 09:47 AM
Winny 3200+ CBBHD 0450RPAW @ 2776Mhz 1.7V

cpuid validation:
http://valid.x86-secret.com/show_oc?id=2819

http://img41.exs.cx/img41/56/2778dl.jpg


Can go more but not stable and no pi can be calculated
http://valid.x86-secret.com/show_oc?id=2820

http://valid.x86-secret.com/cache/2820.png

FX Freak
02-17-2005, 11:19 AM
3000+ 0443mpm @2,7ghz @1,55v watercooled:)

BerT
02-17-2005, 01:03 PM
Highest Stabble HTT i could get.
http://www.xtremesystems.org/forums/attachment.php?attachmentid=24830&stc=1

Highest The BH5 ( 1*512) could go on 2 2 2 5
http://www.xtremesystems.org/forums/attachment.php?attachmentid=24831&stc=1

Highest My CPU OR RAM could go
http://www.xtremesystems.org/forums/attachment.php?attachmentid=24832&stc=1


My Winni is undervolted 0.1V and My psu isnt really stable
ANd 1.4 official msi bios.

CBBHD 0449 GPHW
3200+

aCidbAbY
02-17-2005, 01:27 PM
what kinda bandwith are you guys getting?

FX Freak
02-17-2005, 02:01 PM
here is mine:
http://www.overclockers.at/attachment.php?s=&attachmentid=74326&fullpage=1
stable with 1,55v, next week i remve the hs, and hope it´s stable with only 1,52v:)

skinegibbs
02-17-2005, 09:36 PM
Grrr freak , i'd freak for 2.7

Hombre
02-18-2005, 03:17 AM
I get CBBHD 0447 UPCW 3200+

Think a good one? who has the same?

That's a very good one.

TheHigg
02-18-2005, 12:27 PM
3200 w/ 2x512 Mushkin Lvl2 BH-5 2224 1T
270 1:1

XP-120 and Panaflo Cooling

funkflix
02-18-2005, 12:30 PM
Screenshot doesnt work? Which Board do u use and how much Vdimm?

Hombre
02-18-2005, 02:18 PM
SS is working for me :confused:
And that board would probably be DFI NF4.

funkflix
02-18-2005, 02:48 PM
Look @ the post and edit time. ;)

I hope it is the DFI, bcs i want to run 2 x 512MB on it!

Jort
02-18-2005, 04:36 PM
looks my S937 3000+ still work flawless after losing 2 pins:p

:toast:

http://users.telenet.be/jortcollijn/A64_overclocking/2841mhz.JPG

http://users.telenet.be/jortcollijn/A64_overclocking/owned.JPG

|SiLA|
02-18-2005, 06:03 PM
here's my new record on pi with my 3000 winny 0447

http://img165.exs.cx/img165/9489/30s5bf.th.jpg (http://img165.exs.cx/my.php?loc=img165&image=30s5bf.jpg)


:banana:

Ugly_Jim
02-19-2005, 12:29 AM
I get CBBHD 0447 UPCW 3200+

Think a good one? who has the same?

GAH. Where and when did you get that one? All I can find is CBBID :(

vkbms
02-19-2005, 11:35 AM
looks my S937 3000+ still work flawless after losing 2 pins:p

:toast:


At this frequency you should take 29" .... ;) ....

d@rkn1ko
02-19-2005, 12:35 PM
0448 spmw with dod
http://membres.lycos.fr/m4inaction/A64%203000+%20cbbhd%200448%20spmw%201er/3873250%20(Large).JPG
http://membres.lycos.fr/m4inaction/A64%203000+%20cbbhd%200448%20spmw%201er/26spi%20(Large).JPG

the systeme:
http://membres.lycos.fr/m4inaction/A64%203000+%20cbbhd%200448%20spmw%201er/nico%20002%20(Large).jpg
:stick:

EclectiK
02-19-2005, 01:40 PM
Glad to see you here DarkNico

Nice O/C :slobber:

d@rkn1ko
02-19-2005, 02:50 PM
:toast:

kakaroto
02-20-2005, 05:11 AM
CBBHD 0447 UPCW
BOXED AIR 33c idle

http://www.xs4all.nl/~famchow/A64_3200_winnie/2.7_boxed.JPG

xavicl
02-20-2005, 11:47 AM
Hello, I cannot put this stable or i cant join to OS if I do more than 2700Mhz, Which could be the reason? maybe cpu memory controller?
I can do 270*10 , 9*290 , more FSB crashes because >2700Mhz.
I prefer to stay at 290*9 because 270*10 with 1.66Vcore is too much (36/50 temps).

Right now im at 290*9, more FSB and i cant join to SO, or I must to put vcore till 1.66,11.7 and inestable. My HSF is XP90+Enermax. Any tip to improves that OC?

http://img74.exs.cx/img74/3214/superpi261018ki.jpg

Jort
02-20-2005, 02:49 PM
At this frequency you should take 29" .... ;) ....

i know but i think thats due al the :banana::banana::banana::banana: on my pc.
or memory maybe.
i am reviewing Gskill pc4800 2*256 for [M]
so next week is testing week

chew*
02-20-2005, 04:40 PM
anyone seen this stepping for a 3000+?
CBBHD 0450 TFFW

FriGidi
02-20-2005, 05:07 PM
Here´s my 0450 tpfw winchester:D
http://img56.exs.cx/img56/6660/5min25sec3ox.jpg

=[PULSAR]=
02-20-2005, 05:43 PM
FriGidi, cooling and temps?

FriGidi
02-20-2005, 05:55 PM
=']FriGidi, cooling and temps?
Watercooling & open window (-5c fresh Finnish air:D)

diamonddog
02-21-2005, 06:54 AM
Here is mine 3200+ WPAW 0450 not a very good stepping under -45°C. More Vcore means for this cpu less mhz or not stable. 1,6Vcore is the max. Going now for 3000+ they are much better I think

http://people.freenet.de/benches/2960.JPG

jackkpl
02-21-2005, 07:29 AM
I got one winnie 4 days ago, it is
CBBID 450 WPMW, it does 2450MHz on def. vcore and 2637 (9x293) at 1.6V. Not bad, but i will be looking for something better :)

xavicl
02-21-2005, 07:55 AM
Whats better.... 295*9 or 265*10 ?

Jort
02-21-2005, 08:02 AM
yesterday someone posted this on a forum


gamer was right!
254*10 ( 2540mhz ) gives me 32s
But 273*9 ( 2457mhz ) still gives me 33s!

so 9x is better

xavicl
02-21-2005, 08:18 AM
Dont understand, 32s better than 33s, is it SuperPI 1M time no? So better 254*10.

I thought that was better 295*9 because more FSB, but i dont know for sure.

Maybe for gaming is better 295*9 for greater bandwitdth, i need some answers ;)

Jort
02-21-2005, 08:24 AM
look carefull

its 100 mhz less and 1 sec less so if he puts on 9x 2450 the result is better:)

=[PULSAR]=
02-21-2005, 08:48 AM
Diamonddog something isnt right. Giving that cpu clock and those timings at those speeds 30Second 1M is really high.

diamonddog
02-22-2005, 04:25 AM
hmm don't know whats wrong. Sometimes it is 31s sometimes it is 30s.

vkbms
02-22-2005, 04:28 AM
=']Diamonddog something isnt right. Giving that cpu clock and those timings at those speeds 30Second 1M is really high.

It should be 27" .....Have you optimized the OS?

diamonddog
02-22-2005, 04:48 AM
no I didn't optimized anything. I installed my os with all my normal programms. It should be 27sec??? why that?

Alec
02-22-2005, 05:19 AM
Whats better.... 295*9 or 265*10 ?
When you place dividers; you are couner-balencing he cpu clock speed by increasing the HTT to a higher value. Thus increasing your FSB so your RAM runs faster.
I only run at 295*9 when benching my pc and wanting to get my max RAM speeds. Most of the time I just run 265*10...

Hope this helps,
Alec

qk4722
02-22-2005, 06:32 AM
CBBHD 3200+0447TPDW BOXED AIR

http://home.pchome.com.tw/cool/c785song/DFI/2802225.JPG

Mrki
02-22-2005, 06:37 AM
qk4722 nice winni!

which ram`?

qk4722
02-22-2005, 06:42 AM
A-DATA 256MBx2 BH-5

xavicl
02-22-2005, 06:58 AM
Mmmm i think this isnt stable with 1.5V 2800 and box air?? u got great winchi maybe!!
I got 2700Mhz in 3500+ air XP90 1.6V and highest timmings thant u!

Alec
02-22-2005, 09:24 AM
I can get 2.65GHz stable @ 1.5Vcore on air :)

xavicl
02-22-2005, 09:40 AM
Yes me too alec, but overpass the 2.7Mhz! i cant, also cpuz says the vdimm wrong. I have 1,56V but its 1.6V, the very nice result is the qk4722's one :eek:

Wolf
02-22-2005, 11:52 AM
3000+ 0449 MPM. Running Prime 95 now 2750MHZ 9x305 1.56v.Looking good so far on plain water.

Alec
02-22-2005, 12:32 PM
My cpu-z always gets my vcore voltages wrong...

CP-Geek
02-22-2005, 05:11 PM
SuperPI 8M 5:13 2933 Mhz (http://www.oc-papat.com/cp/pics/suppa_513.gif)

And

SuperPI 1M 28 sec 2933 Mhz (http://www.oc-papat.com/cp/pics/suppa_28.gif)

Not too shabby rock, doing these at Vcore 1.77.

MSI K8N Neo2 Platinium (3.3/Vio-mod + Vcore mod)
2x256MB BH-5

Watercooled with a little help from Finnish winter ;)

CP :)

Kameleon
02-23-2005, 05:37 AM
Just got my new chip through yesterday morning:

http://premium1.uploadit.org/Kameleon/3200stepping.jpg

It's a goodish week, but I don't know about the rest of the stepping - any clues?

Anyway, I paired it up with my Neo2 Platinum, 2x256 of Corsair 3500 BH-5, and an OCZ Booster, with an XP-90 and 92mm Tornado on top, and went for broke :D

http://premium1.uploadit.org/Kameleon/setup2.JPG

Minor tragedy befell my BH-5 when the booster's VR ripped off a couple of SMD resistors on the way in:

http://premium1.uploadit.org/Kameleon/broek.jpg

Thankfully they were above an empty space, which is why (I think) the stick still works fine :banana:

So I got clocking :D Started out with memtest86 before installing Windows, and it seems that I'm getting slightly worse clocks than I did on my LPB - 250MHz wouldnt pass at 3.3v on the booster, which it could do all day on the DFI board. Could this be a result of the resistors that have been knocked off? Anyway, I eventually got it to loop memtest flawlessly at...wait for it...270x10, 2-2-2-10, 4x LDT, 1:1. And 4v :slobber:

Someone wanna tell me what my chip's life expectancy is if I try that for anything more than a few minutes at a time?

Next up was Windows, which was a good deal more problematic - at the moment it won't even boot Windows at 10x250x4, with up to 4v through the RAM and 1.7v through the CPU. Took it back down to 200x10 and tried clocking in Windows, this was as far as I got (unpatched, multiprocessor tweak, CodeRed's BH-5 settings for A64 Tweaker):

http://premium1.uploadit.org/Kameleon//33sshrunk.jpg

At 260x10 I just got reboots, it wasn't stable at 250x10 either.

My problems seem to be CPU related, I'm burning in with two instances of Prime small FFTs at 200x10 1.65v at the moment, do you guys reckon this'll help or is there something I'm missing? The CPU just doesn't want to get itself into Windows, even though it'll post at ridiculous speeds. Any advice would be appreciated :)

qk4722
02-23-2005, 08:10 AM
Mmmm i think this isnt stable with 1.5V 2800 and box air?? u got great winchi maybe!!
I got 2700Mhz in 3500+ air XP90 1.6V and highest timmings thant u!

1.536v stable 2800MHz sp2004
http://img183.exs.cx/img183/2332/28p954ut.th.jpg (http://img183.exs.cx/my.php?loc=img183&image=28p954ut.jpg)

xavicl
02-23-2005, 08:16 AM
1.536v stable 2800MHz sp2004
http://img132.exs.cx/img132/1517/28p951vx.th.jpg (http://img132.exs.cx/my.php?loc=img132&image=28p951vx.jpg)
Cant see nothing lol. Can you get 312x9? Im getting 295*9 but my chip sux more... i need too much vcore.

qk4722
02-23-2005, 08:25 AM
Cant see nothing lol. Can you get 312x9? Im getting 295*9 but my chip sux more... i need too much vcore.

I can get 350x8 1:1 3-4-4-8 with TCCD :D

xavicl
02-23-2005, 08:29 AM
Waw even better 350x8 synchronous, nice memos and chip! :eek: only real 1.58Vcore

FX Freak
02-23-2005, 08:45 AM
what stepping? how much vdimm?

Jort
02-24-2005, 12:10 PM
waterchilled (liquid temp of 4°)
but seems waterflow increased ALOT, maybe 7.2m of tubes is to mutch:p:
thats why temps are that high, and because block needs cleaning :)

http://users.telenet.be/jortcollijn/A64beta_wccooling/magic%20weapon.JPG

http://users.telenet.be/jortcollijn/A64beta_wccooling/rig.JPG



http://users.telenet.be/jortcollijn/A64_overclocking/2937ghz.JPG

aCidbAbY
02-24-2005, 12:31 PM
what pump are you useing for that monster?

Jort
02-24-2005, 12:33 PM
this one.
1200 l/H
http://www.henristudio.com/showcase/images/pump1/images/smaller-mag-drive-water-fountains-pounds-pumps-pmp5_jpg.jpg

BurtyFlexx
02-25-2005, 09:57 AM
Hi there all of you, I'm kinda new here and this is my first post. I would like to congratulate all of you for doing such a great job here.
Here are my specs:
Abit AV8 3rd-Eye
Corsair 2X512 Mb 4400c25PT
Winnie 3200+ CBBID 0501 CPMW
Stable at 240x10 mhz FSB , 1T-2,5-3-3-6 2,6v& 1,45 vcore
multi 10
LDTx4
V-link 4x
AGP calibration off
fixed 66/33 mhz

Regarding your tips about AV8 they are not quite accurate, at least in my configuration. I use TCCD memories but they do work best in slots 1&2, not 3&4. If I install them there I get worse results. Trying to boot 266x9 doesn't work at all(strange), even if I put some juice to cpu,sb,nb,ht. It's not that bad
at all for a CBBID, but it's not good if you look at the mem I use(quite expensive). I'll just give it a try and change the cpu, hopefully.

gundamit
02-26-2005, 01:16 AM
I got sick of looking at my CBBID 0451 3500+ which I had Primed at 2.56ghz on air with 1.6v. I was planning on putting it under the Mach II this weekend but I'm pretty sure it won't do much more than 2.6ghz. On a whim I went down to the local PC Club store and took a look at their very limited selection. I picked up a 3000+ CBBHD 0444 and it looks good so far. The thing that really impressed me was it going all the way to 2.6ghz on the default 1.4v! It looks like a good match for my TCCD and the DFI NF4-DR.

boshi
02-26-2005, 01:18 AM
this one.
1200 l/H
http://www.henristudio.com/showcase/images/pump1/images/smaller-mag-drive-water-fountains-pounds-pumps-pmp5_jpg.jpg

I like the suction cups on it. :toast:

Jort
02-26-2005, 02:55 AM
tnx,
this is how he look irl
http://www.xtremesystems.org/forums/attachment.php?attachmentid=25303&stc=1

FX Freak
02-26-2005, 05:13 AM
nice result, how much vcore, on the cpu-z screen 1,4v and on the screen from msi core center 1,68v??????

Jort
02-26-2005, 05:39 AM
yes it is 1.68, cpu-z gives wrong value.
i think because i adjust it with clockgen:)

vlad
02-26-2005, 06:49 AM
I got sick of looking at my CBBID 0451 3500+ which I had Primed at 2.56ghz on air with 1.6v. I was planning on putting it under the Mach II this weekend but I'm pretty sure it won't do much more than 2.6ghz. On a whim I went down to the local PC Club store and took a look at their very limited selection. I picked up a 3000+ CBBHD 0444 and it looks good so far. The thing that really impressed me was it going all the way to 2.6ghz on the default 1.4v! It looks like a good match for my TCCD and the DFI NF4-DR.

:toast: Thats about what my CBBHD 0450 did at default. It went 2.7ghz with 1.45/1.5v and now 2.8/2.9ghz with 1.6v. Good luck with it. :thumbsup:

perry_78
02-26-2005, 10:44 AM
Yeah, my 0446 SPAW does 279*9 on 1.4 and then need 1,66 for 290*9

mad mikee
02-26-2005, 10:54 AM
I got sick of looking at my CBBID 0451 3500+ which I had Primed at 2.56ghz on air with 1.6v. I was planning on putting it under the Mach II this weekend but I'm pretty sure it won't do much more than 2.6ghz. On a whim I went down to the local PC Club store and took a look at their very limited selection. I picked up a 3000+ CBBHD 0444 and it looks good so far. The thing that really impressed me was it going all the way to 2.6ghz on the default 1.4v! It looks like a good match for my TCCD and the DFI NF4-DR.

Veddy good chip :toast:

xavicl
02-26-2005, 11:27 AM
I have CBBID 0450 3500+ 2.7GHz @ 300x9 , 6 hours prime. 1,63Vcore :S there are better chips :(

http://img214.exs.cx/img214/8500/superpi1m31300x99dt.th.jpg (http://img214.exs.cx/my.php?loc=img214&image=superpi1m31300x99dt.jpg)

Perc
02-26-2005, 02:17 PM
hey guys

just picked up a 3000 winchester retial box to play with while i get my FX-53 out of the hospitial. anyways here are the steppings let me know what i got? i usualy try and buy retail because they tend to give you the verry latest steping is what i hope the case is now?? ADA3000DIK4BI CBBID 0502BPAW 1184288A50123

i planon setting the chip up in my mahc unit tonight so i hope im not effected by that temp thing the winchesters seemed to be haunted about a few months back...

ths perc.

perry_78
02-27-2005, 01:42 AM
I have CBBID 0450 3500+ 2.7GHz @ 300x9 , 6 hours prime. 1,63Vcore :S there are better chips :(

http://img214.exs.cx/img214/8500/superpi1m31300x99dt.th.jpg (http://img214.exs.cx/my.php?loc=img214&image=superpi1m31300x99dt.jpg)

What's your BIOS set voltage?

TekXoID
02-27-2005, 02:12 AM
OC settings in sig...I'm pretty satisfied until SOI/SSE3 A64's arrive. :D

http://img205.exs.cx/img205/8769/ztkoc3ws.th.png (http://img205.exs.cx/my.php?loc=img205&image=ztkoc3ws.png)

Th3__W00T_GuY__
02-27-2005, 08:43 AM
2.7 GHz Superpi 32M stable :) + 24/7! :banana4: :banana4: can't oc ram right now !

http://www.overclockers.at/attachment.php?s=&attachmentid=74531

Verification: http://valid.x86-secret.com/show_oc?id=2801

gundamit
02-27-2005, 11:19 AM
Can't seem to get it stable enough to Prime over 3ghz, but i can run 3Dmark2001 (http://img240.exs.cx/my.php?loc=img240&image=334x9109div2543843811200sq.jpg) and also SuperPi (http://img200.exs.cx/my.php?loc=img200&image=334x9109div25438read1at.jpg)
I've lowered it all the way down to 2.85ghz and it still craps out of Prime, sometimes in an hour, sometimes after 4 hours. Seems kind of random. Any ideas? Otherwise I'm pretty happy with stability. :toast:

BadlyDrawnBoy
02-27-2005, 12:38 PM
CBBFD 0441VPBW
3200+
10x255 1.525V
Arctic Cooling Freezer 64
DFI NF4 Ultra-D

A_X
02-27-2005, 12:59 PM
Finally got a good one:

http://www.silent-simon.nl/hop/forum/upload/AX/images/2005-02-27_211351_42.59.JPG

Air Cooling. Btw don't mind the high Vcore. This was just to check how high I could run Pifast. For 24/7 I run 2,75Ghz @ 1.6V.

NiCKE^
02-27-2005, 01:47 PM
Got my winnie to do 2.4ghz stable 24/7 with prime. Haven't tried any more but I will. http://home.no/nickeh/2.4ghz.240fsb.1.5-2-2-6.solid.jpg
http://home.no/nickeh/2.4ghz.240fsb.1.5-2-2-6.solid2.jpg
http://home.no/nickeh/2.4ghz.240fsb.1.5-2-2-6.solid3.jpg

240FSB 1.5-2-2-6 1:1 1T 2.4ghz 1.4v 3.3v (Set 3.3v in bios)

CP-Geek
02-27-2005, 03:48 PM
Here's my 24/7 (http://oc-papat.com/cp/pics/247_32M.gif).

CP :)

aver
02-28-2005, 06:44 AM
I will post pictures when I go for lunch, but right now
Running
270HTT * 9
Ram 2.5-4-3-7 1T 1:1
Sandra gives 7000+ MBS
SuperPi 34sec 1 M
I think this thing will go pretty far (i havent tested further yet)

zeebs
02-28-2005, 01:47 PM
First boot on brand new machine.
http://img.villagephotos.com/p/2005-2/963102/lowvcoreOC.JPG
Boxed air cooler
0447 SPAW 3200+
G. Skill LE @ 2.5-4-3-7
Hope to get it under water soon.

gallant
02-28-2005, 03:25 PM
Well, here is my winny OC.

A64 3200+ (CBBID 0502APCW :mad: )
DFI NF4 Ultra - D (BIOS 218)
2x512 OCZ 3500+ plat. Ltd. Edition.
Antec Smartpower 430w

fsb @ 250 mhz
Core @ 2.375ghz (x9.5) (1.450v)
HTT x4 (1.20v)
DRAM @ 216 mhz (432 DDR, 2.70v, 9/10, 2-3-3-8)

No pics yet. Not worth the effort! lol

naelq
02-28-2005, 03:37 PM
keep working bud! :banana: :D

gallant
02-28-2005, 03:51 PM
Seems my core is not going to cooperate with me much past this OC. No matter what I adjust I can't get the core to accept 2.4+. I've had my ram to nearly 500mhz ddr and dropped HTT lower and lower but still, even at 1.525v the cpu just poo's on it all.

Dern this CBBID junk!

zeebs
02-28-2005, 09:25 PM
Well, had some time to do more testing. Lower FSB than my original OC, but higher overall speed, and slightly higher vcore. Looks like I got a nice chip! I am really happy with it so far. :D

http://img.photobucket.com/albums/v516/zzzachb/2600lowvcore.jpg

mad mikee
03-01-2005, 05:44 AM
9x305 @ 1.55Vcore, 2.8 Vdimm
9x305 - settings later (http://valid.x86-secret.com/show_oc?id=4834) :hehe: :D

gundamit
03-01-2005, 11:06 AM
Stable enough for games, 3DMarks and 32M SuperPi runs. (http://img25.exs.cx/my.php?loc=img25&image=334x9109div25438up5gv.jpg) Can I stop obsessing why it bombs out of Prime in about 1-4 hours? :rolleyes:

PlatoonSgtElias
03-01-2005, 11:25 AM
http://www.zone.ee/platoonsgtelias/1/3GHz_AIR.JPG?2

3012MHz with air... got 3100MHz outside but dont have a pic :(

zeebs
03-02-2005, 06:05 PM
More testing with the CBBHD 0447 SPAW 3200+.

This thing gets iffy around the 2.7ghz mark, but its doing some nice work below that.

Here's a pic of it doing 2.5ghz on 1.376 volts
http://img.photobucket.com/albums/v516/zzzachb/2500.jpg

:toast:

vlad
03-03-2005, 01:36 AM
Hay zeebs it sounds like a crappy step you have there, You sould sell it to me and get another. :hehe: Just joking bro. Mine was a little stubborn at first. 2.5ghz was around what it would do stable at that voltage too, But once i bumped the vcore up it started to take off. Keep pushing it. Good luck. :cool:

AllBrain
03-03-2005, 02:27 AM
This is the max stable my 3200+ will do... (CBBHD 0450SPBW)

http://img.photobucket.com/albums/v313/AllBrain/X800XL/32s.jpg

Feinripp
03-03-2005, 07:12 AM
@Allbrain:

i have the exact same CBBHD0450SPBW.. about 1,7V is a lot Juice for it..
i wonder how much Vcore does yours need @ around 2500 Mhz?
Mine does Prime for 8h @1,5v /2550Mhz.
But if i try 2650Mhz, it needs 1,65V. Thats to much 4 Stock Cooler.

zeebs
03-03-2005, 11:34 AM
Hay zeebs it sounds like a crappy step you have there, You sould sell it to me and get another. :hehe: Just joking bro. Mine was a little stubborn at first. 2.5ghz was around what it would do stable at that voltage too, But once i bumped the vcore up it started to take off. Keep pushing it. Good luck. :cool:


Thx bro. I am having problems in prime with it over 2550 mhz. It gets an error within the first minute, seems like I have tried it all :(. It just won't stabilize. At least it is running super cool @ 2.55 but I want MORE SPEED!!

If I can't figure out what to do to get it stable beyond that I will probably just splurge on some vx to keep things as fast as possible for now and maybe upgrade for venice or DC FX :D

Dragonx21
03-04-2005, 03:03 AM
Can winchester go sub-zero?

vlad
03-04-2005, 04:16 AM
Its still Hit or Miss. :( Some do some dont. Give it a try and let us know how you do. Good luck.

FX Freak
03-04-2005, 07:07 AM
my new 3000+ 0448SPAW:D
watercooled, hope for 28sec. suerpi1m:D

bass
03-04-2005, 09:17 AM
My dead winnie 3200+ killed by a DFI mobo :mad:

http://valid.x86-secret.com/show_oc.php?id=3606

boblemagnifique
03-04-2005, 12:27 PM
My dead winnie 3200+ killed by a DFI mobo :mad:

http://valid.x86-secret.com/show_oc.php?id=3606

+1

3000+ cbbhd 0448 Spmw is Dead (dfi nf4 -> Boot vcore 1.85v :( )
Box Amd -> Tower outside :toast:
1.55v Bios

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0448spmw/max3106mhz.PNG

3200+ cbbhd 0447 Tpew
dfi nf4 ultra d
box Amd -> Tower Outside :toast:
1.7v bios

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/winnie@3140mhz.PNG

Only Max Screen :cool:

zeebs
03-04-2005, 05:00 PM
What's the temperature outside Bob?

FX Freak
03-05-2005, 03:12 AM
my 24/7 settings:)

boblemagnifique
03-05-2005, 04:41 AM
What's the temperature outside Bob?

0° approximately (it snow :D )

saaya
03-05-2005, 05:03 AM
My dead winnie 3200+ killed by a DFI mobo :mad:

http://valid.x86-secret.com/show_oc.php?id=3606

how did the dfi kill it? :confused:

[_Silence_]
03-05-2005, 01:36 PM
Anyone that couldn't run a Winnie @ full power r404a prommy (-50ºC +-) but it could run with the prommy fans off? (-35ºC +-)? Mine runs with the fans off, but my prommy has a leak now and cant test the OC, so if anyone can run them with the fans off share your results :P

perry_78
03-05-2005, 01:40 PM
You french are lucky with your steppings. DK has at least medicore steppings, the US seems to have hollow crap at the moment :(

naelq
03-06-2005, 03:28 AM
3000+ CBBHD 0447 TPCW on STOCK AMD FSH, running @ 9x300MHz=2.7GHz with 1.55v vcore & RAM (with 9/10 divider) running 270MHz @ 2-2-2-5 3.5v vdimm.
+24 hours Prime95 stable, now runing F@H for about 13 hours error free. :)
here is a screenie:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=26033

/// EDIT ///
hardware used:
AMD 3000+ Winie & STOCK AMD HSF
DFI NF4 LP Ultra-D with 2.17 BIOS
2xOCZ 512MB VX
ATI Rage Mach64 PCI! :banana: (my X850XT should be here next week)
Enermax NT 480W

computersmsa
03-06-2005, 03:38 AM
http://home.scarlet.be/~pascpiet/DV/CBBHD0450WPBW_WHS.jpg

http://home.scarlet.be/~pascpiet/DV/CBBHD0450WPBW_2836_1.49_SP2004_5h29.gif

http://home.scarlet.be/~pascpiet/DV/CBBHD0450WPBW_2844_1.49_OCCTT_OK.gif

Not WaterChilled, juste WC with water hole -> Water = 12°C
http://forum.bel-hardware.citywebz.com/Bh/viewtopic.php?t=62

:toast:

bass
03-06-2005, 08:27 AM
how did the dfi kill it? :confused:

The three-phase power delivery circuit next to the cpu socket sparked, and thats what killed my poor cpu :mad:

But I'll have a 0448 SPAW to play with tomorrow :D

I will be sending the board back to DFI on tuesday for rma, so I'll be playing with my msi neo 2.

IronAge
03-06-2005, 11:12 AM
@Allbrain:

i have the exact same CBBHD0450SPBW.. about 1,7V is a lot Juice for it..
i wonder how much Vcore does yours need @ around 2500 Mhz?
Mine does Prime for 8h @1,5v /2550Mhz.
But if i try 2650Mhz, it needs 1,65V. Thats to much 4 Stock Cooler.

I have a 3200+ CBBHD 0450 SPBW too.

It runs over 15 Hours Superprimestable at 2600 @ 1,45.

On a MSI K8N NEO4 Platinum with Stock 1.1 Bios.

Temp is just at 37 Degree Celcius.

[_Silence_]
03-06-2005, 12:06 PM
This is my 3200+ CBBID 0451 Stock cooled, DFI Ultra-D and 512Mb BH5.
CPU always arround 2630Mhzs 1.65v, mems @ 265Mhzs 2-2-2-5 +- and 330HTT =)

http://pwp.netcabo.pt/orlandojdr/winnie12k.jpg

http://pwp.netcabo.pt/orlandojdr/winnie32s.jpg

http://pwp.netcabo.pt/orlandojdr/mems7.5k.jpg

EclectiK
03-06-2005, 12:36 PM
Complet opn?

CBBID 0451 xxxx ?

ECK

[_Silence_]
03-06-2005, 12:41 PM
Complet opn?

CBBID 0451 xxxx ?

ECK

APAW i think or SPAW.

TEDY
03-06-2005, 01:05 PM
i have this proc in my signature and i'm very unhappy with it...just can't find any stable combination

tried several things in bios...nothing is 100% prime stable...what shall i do ????

so far stable 240-255 * 9 max.....and needs a lot of juice... :(

Cyrus The Virus
03-06-2005, 01:07 PM
After a Day of tweaking

http://users.pandora.be/CyrusTheVirus/PiFast%2041.59%20@2883%20Mem@240.jpg

AMD Athlon64 3200+ @2883 Boxed Air 1.66V
ASUS A8N-SLI Deluxe HTTx 4x286 (Vcore & Vdimm Mod)
Corsair Twinx PC3200 BH5 @240MHZ 1.5*-2-2-0*-1T @3.3V

:banana:

With room temp op 10° Case 16° Max CPU 25°.

The case stands near a open window

zeebs
03-06-2005, 01:19 PM
ROFL at that guy who removed the IHS.... Way to butcher your processor... If you would have just slid a razor blade lengthwise under each corner and lifted, instead of stabbing at the sides, you could have had it off in 15 seconds, without all those scars... I hope after all that it at least helped your OC...

EclectiK
03-06-2005, 01:25 PM
APAW i think or SPAW.

Obrigado :)
But is it possible to have the exact opn please?

Thx for that

ECK

easypanic
03-06-2005, 01:52 PM
My setup :

MSI Neo2 Pl
2*512 Patriot XBLK
AMD 3000+ 0445 SPAW

http://Www.easypanic.be/3075.JPG

stable @ 29xx MHz for Pi :)

http://Www.easypanic.be/pi29sec.JPG

Full CPU code: (http://Www.easypanic.be/cpu.JPG)

FriGidi
03-06-2005, 02:29 PM
3200+ CBBHD0450TPFW
http://img209.exs.cx/img209/3158/5m21s2lw.jpg

boblemagnifique
03-06-2005, 03:30 PM
Winnie 3200+ Cbbhd 0447 Tpew
DFI NF4 Ultra D
2*256 Adata BH5 (0313we) 2/7/12/2/2/2/5/2/2/1/2 -> 3.9v
Box AMD -> Tower Outside :D
Xp Lsd 2 :(
No patch :)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi28s2.PNG