Official Winchester OC Thread! [Archive] - Page 3

socrilles

12-30-2004, 04:58 PM

Wow its finally letting me post, anyway picked up a 3000+ retail from monarch and an epox 9NDA3J from newegg, and I'm priming for over an hour now at 2.65 ghz 294.5*9 (adjusted down from 2.7 ghz using clockgen - thats why i get .5) :banana: :banana: I could get into windows at 2.85 ghz, and could adjust to over 2.9 ghz with clockgen all at 1.47 V according to CPU-Z
stepping info:

ADA3000DIK4BI
CBBHD 0447UPCW

Cyrus The Virus

12-30-2004, 05:30 PM

boblemagnifique

12-30-2004, 06:45 PM

A64 Max Screen AIR

http://www.biwa.ne.jp/~yok/HIGH-CLOCK.htm

Cyrus The Virus

12-31-2004, 02:32 AM

A64 Max Screen AIR

http://www.biwa.ne.jp/~yok/HIGH-CLOCK.htm

The first place is take by the same cpu as mine only with a High Vcore

perry_78

12-31-2004, 03:50 AM

Hej, what is the highest voltage you can use using a BOX cooler?

POFXXX

12-31-2004, 04:29 AM

my 3000+
V-CORE ORIGEM
http://img145.exs.cx/img145/8206/28ab.jpg

http://img70.exs.cx/img70/9087/30s13eh.jpg

UP to 2850 and v-core 1.5

S!1v3rB@cK_Dk

12-31-2004, 04:29 AM

If it aint to warm (50-55°C), you can use it up to 1.65-1.70v ;)

Mrki

12-31-2004, 05:08 AM

POFXXX 307MHz 2.5-3-3-x with 2x512?

what ram u using?

perry_78

12-31-2004, 05:11 AM

How high do you go with a BOX at 1.65?

POFXXX

12-31-2004, 07:05 AM

POFXXX 307MHz 2.5-3-3-x with 2x512?

what ram u using?

A-Data 512Mb PC4500 DDR566 yep 2 ram

http://img135.exs.cx/img135/5120/2551661t25339285v6rj.jpg

POFXXX

12-31-2004, 07:17 AM

If it aint to warm (50-55°C), you can use it up to 1.65-1.70v ;)
50 or 55 +/-. ar ?

http://img127.exs.cx/img127/5923/picture0698wv.jpg

NiCKE^

12-31-2004, 08:11 AM

Which volt at the memories did you use?

boblemagnifique

12-31-2004, 08:25 AM

Gigabyte K8NS ultra (bios F7 roxxxxx :slobber: )
adata bh5 (3.4v only)
3200+ 0.09 Cbbhd 0447 tpew (1.4v)
Full AIR :)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/winnie@365fsb.PNG
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/winnie@324fsb.PNG
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/winnie@316fsb.PNG

Mrki

12-31-2004, 09:43 AM

A-Data 512Mb PC4500 DDR566 yep 2 ram

http://img135.exs.cx/img135/5120/2551661t25339285v6rj.jpg

now i understand ... thats 2T ;)

NiCKE^

12-31-2004, 10:03 AM

Or very very vad timnings.

shimmishim

01-01-2005, 11:43 AM

i've read many pages of this thread but not all of it.

do the newer winchesters still suffer from the subzero bug? or is it motherboard related?

idleuser

01-01-2005, 12:42 PM

Finally got my 3000+ into a board. Getting 2.5ghz at 1.65vcore. Sad that its so weak, getting 34second 1m.

I'm runing 2.5ghz and i'm gettig 36sec on 1m on PI. No worries here I think all we got to do is tweak the timings on the memory but i'm running all stock settings except memory timing to 2.5-3-3-7 @ 270 HTT @ 9x. All on stock setting :)

Cyrus The Virus

01-01-2005, 02:24 PM

New record on PiFast:

Screenshot (http://users.pandora.be/CyrusTheVirus/PiFast%2043.31%20@2800%20Mem@233.JPG)

PiFast: 43.31 Sec

Paa`

01-01-2005, 10:51 PM

Little confused here, could do with some help from you lot as a64 overclocking is new to me.

System is 100% stable at 3 x 300 htt x 6 ( remove cpu bottleneck ) see screenie below.

This is with ram set to 100 in bios ( 150 real ) but if i up ram to 133 ( 180 ish ? ) pc does'nt boot.

ram is ballixtic pc4000 and runs perfect at 10*250 fsb 2.5-4-4-10 @ stock volts. so i know the ram is good to 250 fsb.

have no idea at all where the cpu limit is, really difficult to find it's limit. ( what programs/tests are people using to test stability ?? ) the pc is used for gaming so need's to be 100% 3d stable always 24/7. ( heard about problems with prime95 so maybe 3dmark05 instead? )

cpu does 300 htt at stock volts no errors/problems ( is that normal or ? )

Is there anyway to get this situation with my current setup.

a64 3500
2x 512 ballistix
msi k8n neo2
1.5xx bios atm.
sata hd on sata port 3.

Id like to be running

the ram at 200 2-2-2-5 ( it does this already ) but the cpu at highest possible cpu speed.

so do i try to find a answer between ram deviders 133-166 and so on and htt speed and exactly how do the ram clock's relate to htt like when i set to 100 and run htt at 300 ram runs at 150.

Thank's in advance for any info a64 clocking is alot more stressful than nf2 mobile 2600 clocking lol that was really easy ( 2.8 ghz ).

Wish this was as easy :p

oh and not sure on cpu week number forgot to check before i stuck the waterblock on which i dont wanna take of again :P, but the cpu was bought 2 month's ago from overclockers.co.uk if anyone know's what sort of batch's they had back then, they've been outta stock for ages now on winnie 3500's.

ilal2ielli

01-01-2005, 11:39 PM

htt is used to determine the cpu's clock speed. the 3500+ winchester has a default multiplier of 11 (200httx11=2200mhz). now, ram speed is calculated down from the cpu clock speed. running 1:1 or as the neo2 bios puts it "200" will match your memory frequency to the htt frequency, but running any of the other memory settings will set your memory frequency based upon a divider from the cpu clock.

since you say you've tested your ram to 250, you can try running 11x250 and use prime95 or superpi to test for stability. i usually test superpi first. if it finishes one iteration of 32mm superpi, then i'll begin to prime it for at least 6-8 hours. if you want to use a 3dmark to test stability, you need to use 3dmark01 since it is more cpu dependent than the other 3dmarks.

if you want to use a high htt frequency then you'll most likely need to use the dividers for your memory frequency. when you change the htt frequency, it's best to use 4x for anything up to 250, and 3x for anything up to 300 and so on. you don't want your htt to go over 1000 (htt x htt multi), as it can cause unneeded instablity.

if i missed anything, be sure to ask, and if i dont answer in time, i'm sure someone else will.

Sgt_Strider

01-02-2005, 02:28 AM

what is the best stepping to get for the AMD 64 3000+ S939?

perry_78

01-02-2005, 04:22 AM

Looks like 47 TPEW to me :)

My 0446SPAW looks like it should do its 2700 which i want it to. I'm not demanding at all, i just require a 50% overclock otherwise i'll get a new one. And i want FX-53 performance for €130. Not demanding at all :D

TheMeatFrog

01-02-2005, 04:33 PM

My first post! :banana: Wanted to reach 9x290(2.6ghz) but I've tried everything I know and it just isn't gonna do it. System specs in sig.

ilal2ielli

01-02-2005, 04:45 PM

My first post! :banana: Wanted to reach 9x290(2.6ghz) but I've tried everything I know and it just isn't gonna do it. System specs in sig.

might wanna lower the voltage on that. 1.76v for 2.53 is too much vcore, my old 3000+ week 37 did 2.5 at 1.55v.

TheMeatFrog

01-02-2005, 04:51 PM

might wanna lower the voltage on that. 1.76v for 2.53 is too much vcore, my old 3000+ week 37 did 2.5 at 1.55v.
Any less vcore and cpu becomes unstable. Dunno why... :mad:

ilal2ielli

01-02-2005, 09:14 PM

well if you're comfortable running the vcore that high to have 2.53, i guess you'll be fine.

TheMeatFrog

01-02-2005, 10:25 PM

Wow! Just checked my temps while playing cod and I saw 56 but only for a second. 55 seems to be at load. :slobber: What is the limit for 3000+ winchesters?? Also what direction should the case door fan be facing? Right now I have it pulling air away from my cpu and video card. Would turning it around help temps any?

amilian

01-02-2005, 11:34 PM

56 is still ok, but beyond this and you will likely notice instability issues. start to worry when it's 65 and over. yes, turn the fan around.

geosin

01-03-2005, 04:26 AM

Just saw week 50's at my local shop. This it was 0450XPMWs and UPMW

funkflix

01-03-2005, 04:32 AM

Where do u come from? :)

nealh

01-03-2005, 07:17 AM

what are safe vcore...I am running a 3200 @ 2600 in prime 95 with XP90 at 1.6v idle and load of 1.63v

is this too high

jhuezo

01-03-2005, 07:42 AM

What are the average results for a week 44 3200+ winnie? This is what I got from MonarchComputer.com: CBBHD 0444XPEW. Let me know how that stepping did for you please :) It will have a home on an MSI K8N Neo2 Platinum with some PDP XBL (1GB). Any suggestions on how I should get a stable OC?

Thanks,
jhuezo

EDIT: It will be cooled by an XP-90 and a 92mm tornado. So, I'm adding sufficient cooling, I hope.

PeGGaaSuSS

01-03-2005, 12:31 PM

My Winnie with Aircooling Box.

http://divers.peggaasuss.net/images/CG-CPU-Z-2830.PNG

http://divers.peggaasuss.net/images/CG-2845.PNG

On a Gigabyte GA-K8NF-9.

perry_78

01-03-2005, 12:55 PM

My Winnie with Aircooling Box.

http://divers.peggaasuss.net/images/CG-CPU-Z-2830.PNG

http://divers.peggaasuss.net/images/CG-2845.PNG

On a Gigabyte GA-K8NF-9.

Very nice!

aCidbAbY

01-03-2005, 01:12 PM

My Winnie with Aircooling Box.

On a Gigabyte GA-K8NF-9.

nForce4 :toast:

amilian

01-03-2005, 02:42 PM

PeGGaaSuSS, what's yer 1M superPI time and Sandra arith/bandwidth like?

geosin

01-03-2005, 02:59 PM

I'm from Singapore. The 0449 and 0450 3200+ have just arrived. :)

z00mX

01-03-2005, 04:09 PM

DevilsRejection

01-03-2005, 04:11 PM

I'm from Singapore. The 0449 and 0450 3200+ have just arrived. :)
bench em lol

boblemagnifique

01-03-2005, 06:20 PM

My Winnie with Aircooling Box.

http://divers.peggaasuss.net/images/CG-CPU-Z-2830.PNG

http://divers.peggaasuss.net/images/CG-2845.PNG

On a Gigabyte GA-K8NF-9.

:toast: On attends les benchs :banana4:

jhuezo

01-03-2005, 07:18 PM

i happen to have the same week cpu that you have and right now im running it at 2.7ghz prime stable mem at 166 2.5-3-3-8 260 fsb with htt at 3x

AWESOME! Thanks for the reply. I can't wait for all my components to get here so I can start putting them together..

TheMeatFrog

01-03-2005, 07:27 PM

Just checked my week...it's a 37. Is that bad? I'm thinking it is. Should I rma it and hope to get a week 40 or later back?

Hombre

01-04-2005, 05:16 AM

Hi, 2 questions:

- What is the recommended MINIMUM voltage for Winchester, and what is the MAXIMUM? (ON AIR)

- Now, that we have already prove that some Winchesters don't like Prime95, what is the recommend alternative currently? :confused:

- Also, I have a very annoying issue: My Winchester "flucatates" in 0.1mhz every few seconds, goes 0.1mhz down and goes 0.1mhz back. Vcore changes also. CPU is 3200+, mobo is Neo2 Platinum with 1.36b bios.

Thanks in advance !!! :cool:

Dunk

01-04-2005, 09:39 AM

http://members.boards.ie/tacticalanni/2.7Ghz%20stable%201.57Vcore%202.7Vdimm.jpg :banana:

I knew it had 2.7Ghz in it (got bored of prime after 7hrs, she's stable, folding and gaming away as happy as larry) :toast:

I just made an attempt to read the thread again since I last posted to check on other peoples overclocks to see how they were going with the new batches of chips. There's as many and if not more people hijacking the thread for help, than there are people posting their overclocks.
Is it so hard to start a new topic in the appropriate forum if you need help instead of messing up a nice sticky thread that has the hard facts and figures from different peoples setups that others want to know and analyze? I guess I'm making a little request and having a rant to say a) Can we get this thread cleaned up pretty please! With icing, sugar sprinklings and a cherry on top! b) STOP HIJACKING THE THREAD PLEASE (sorry for caps, it needs to be shouted and repeated until the thread gets back on track!

3SP

01-04-2005, 12:34 PM

i got my winchester last week. today i found some time for testing.

first screen. :)

stepping is: 0446rpaw

edit: @ boxed cooler

boblemagnifique

01-05-2005, 03:29 AM

3200+ Cbbhd 0447 tpew
gigabyte k8ns ultra
2*256 adata bh5
1.5v Bios
Box AMD Aircooling

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/prime@2653mhz.PNG

Hombre

01-05-2005, 05:15 AM

@ Dunk:

What stepping? :toast:

Dunk

01-05-2005, 09:14 AM

@ Dunk:

What stepping? :toast:

I got too excited with the build each time and never stopped to check, sorry :o

My guess is it's a week 30 something chip as it came from the first batch of 3500's to arrive at OCUK..

Jasonhk

01-05-2005, 09:33 AM

Here is my 3200+ 0441 Cooled By a Thermaltake Polo 735

http://www.jasonhk.za.net/benchies/3200+2810.JPG

Darkboss

01-05-2005, 10:03 AM

Here is my 3200+ 0441 Cooled By a Thermaltake Polo 735

http://www.jasonhk.za.net/benchies/3200+2810.JPG

Hello all, I'm a new member! Cheers! Jasonhk, what bios are you using and what thermal paste? My temps are all over the place!! I have gotten to 2.6ghz (260x10) and 2.7 (270x10) but can't gain access to my email to post pics. Unfortunately, my 2.7 isn't stable but I think my chip is a good one! I'll try to post pics asap. Highest oc w/ my mem is 285x9. Check it out. (http://service.futuremark.com/compare?2k1=8347970)

Jasonhk

01-05-2005, 11:23 AM

Hello all, I'm a new member! Cheers! Jasonhk, what bios are you using and what thermal paste? My temps are all over the place!! I have gotten to 2.6ghz (260x10) and 2.7 (270x10) but can't gain access to my email to post pics. Unfortunately, my 2.7 isn't stable but I think my chip is a good one! I'll try to post pics asap. Highest oc w/ my mem is 285x9. Check it out. (http://service.futuremark.com/compare?2k1=8347970)

Im using Artic Silver 5 , my bios is the 1.36b.

:)

3SP

01-05-2005, 01:08 PM

3200+ Cbbhd 0447 tpew
gigabyte k8ns ultra
2*256 adata bh5
1.5v Bios
Box AMD Aircooling

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/prime@2653mhz.PNG

the temps are awesome for boxed cooler :eek:

boblemagnifique

01-05-2005, 01:11 PM

the temps are awesome for boxed cooler :eek:

30° Idle
45° Full

3SP

01-06-2005, 12:02 PM

i now got to 2650mhz with 1.6vcore. (3000+)
super pi 1m = 0.32.
not stable but pretty nice clock for boxed cooler.
i'll try to get it stable.

Alec

01-08-2005, 01:27 AM

OK, This is my first post on this forum so hey guys :)

Just gave my athlon 64 a good kicking and this is what I have got:
http://host366.net/pics/25.JPG

System Specs:
AMD Athlon 64 3200+
ABIT AV8 Motherboard
Corsair XMS3700 RAM (256mb, looking ot get mroe in future)
Radeon 9800Pro Graphics Card (128MB DDR)

Settings that I used to gert that result:
http://host366.net/pics/overclock.JPG

I dont know how much I can get out of my system without damagig it in anyway... Shall do some more experements later on.

Thanks,
Alec

L0$t Pr0PhEt

01-08-2005, 02:02 AM

Welcome to the forums Alec!!! :toast:

You got a very nice cpu but your superpi score is a bit low, try to disable all unnecessary programs.

aCidbAbY

01-08-2005, 02:38 AM

OK, This is my first post on this forum so hey guys :)

Thanks,
Alec

why does you cpu-z shot show 1.4vcore?
it says below 1.75vcore.
38/s pi is pretty slow for your setup and OC.
i got 35/s with my 754 setup :stick:

welcome BTW :toast: nice OC

Jasonhk

01-08-2005, 03:05 AM

Here is my 30 seconds on 3200+ 0441 on Neo2 With Tt Polo 735

http://www.jasonhk.za.net/benchies/30.JPG :)

Alec

01-08-2005, 03:35 AM

Hey Guys,
I have a few glitches with my system. If I overclock it to anything more than 2.5GHz it will just restart itself. And for the cpuid result.. Im not sure why it didnt update the voltage on there....

I have just flashed my BIOS and managed to get it to do that superpi in 36 secs instead of 38 secs but restarted itself just after taking the screeny :(

I hope I can get these minor glitches fixed soon...
Any help is welcome,
Thanks for lal the feedback so far!
Alec

Jupiler

01-08-2005, 03:39 AM

How much VCore are you feeding your cpu?
Can you post your memory timings as well? Maybe the settings are to thight and might cause the reboots.

And welcome to Xtreme. :welcome:

Jupiler

01-08-2005, 03:45 AM

My 0431 UPMW 3200+ on Neo2.

http://users.skynet.be/MetalHead/winnie3200/pifast4439.jpg

http://users.skynet.be/MetalHead/winnie3200/superpi@2700.jpg

Alec

01-08-2005, 04:02 AM

Hey Guys,
I just looked at my corsair RAM stick. The only thign that I saw which kind of represented RAM timings as this: 0439083-10
Maybe there is a piece of software which can find the RAM timings and allow me to alter them?

Thanks agai nfor lal the help,
Alec

L0$t Pr0PhEt

01-08-2005, 04:05 AM

Jasonhk

01-08-2005, 04:09 AM

Alec

01-08-2005, 04:09 AM

OK I have attatched he memory results from in cpu-z

Thanks,
Alec

Alec

01-08-2005, 04:54 AM

Just managed to get my RAM down to CAS2.5
I still have lockups, though :(
Maybe I should tweak soem other RAM settings?

Thanks,
Alec

L0$t Pr0PhEt

01-08-2005, 05:08 AM

Just managed to get my RAM down to CAS2.5
I still have lockups, though :(
Maybe I should tweak soem other RAM settings?

Thanks,
Alec

Whats your vdimm? Try to raise it.

Alec

01-08-2005, 05:35 AM

Currently to 2.8V :) I always have the VDIMM at 2.8Volts when overclocking so it stays more stable at higher FSBs.

Thanks,
Alec

WiCKeD

01-08-2005, 08:22 AM

:toast: Now that's very impressive, boblemagnifique

boblemagnifique

01-08-2005, 08:28 AM

Here is my 30 seconds on 3200+ 0441 on Neo2 With Tt Polo 735

http://www.jasonhk.za.net/benchies/30.JPG :)

Good :toast: but you have possibility of better optimized a64 tweaker, you are not with best the adjustments ;)

Alec

01-08-2005, 09:31 AM

Can any of you guys give me the best A64 tweaker adjustments for optimum and most stable performance? You have seen my specs in a post I wrote earlier today.

Thanks,
Alec

Jasonhk

01-08-2005, 12:35 PM

Good :toast: but you have possibility of better optimized a64 tweaker, you are not with best the adjustments ;)

What do you mean? I don't know what is going on in a64 tweaker , I just copy other peoples settings and mess around with them a bit :D

Adasi

01-08-2005, 01:19 PM

I'm gonna change my cpu/mobo to a64 and I don't know which cpu to buy. I was looking for 0441 but with no results. My friend told me he has 045OUPMW & 0444XPEW. I know that 44 week overclocks to about 2500MHz but what about the 50? Anyone heard about overclockig results? I'm gonna put the phase-change on my cpu, hope to go over 3GHz.

Alec - could you please post some more info about your proc? Thx.

Alec

01-08-2005, 02:01 PM

Alec - could you please post some more info about your proc? Thx.

Well. I have a AMD Athlon 64 3200+ Winchester socket 939 CPU with a Venus 12 fan and heatsink ontop of it. Usually runs at around 37 degrees (33 degrees or less when idle... 45 degrees heavy load and 50 degrees + when overclocked to around 2.5GHz)
I ordered it on boxing day from aria.co.uk I did wrtie down the number which was on the chip itself but I have misplaced the piece of paper I wrote it on...

My motherboard is the Abit AV8 type with 256mb of Corsair XMS3700 RAM (sadly running at CAS3 :( ).

My system tends to restart itself if I try to run superpi with the RAM timings altered so it is running equivelent to CAS2.5. The absolute maximum I can get out of my CPU at this curent time is 2.5GHz, anything more and i will just restart itself.

I also have a Radeon 9800Pro which doesnt like 3d benchmarking when my system is overclocked (anything over about 2.2GHz and it will randomly halt my system...)

I hope this helps, I will try to get hold of that number for you ASAP.
Alec

boblemagnifique

01-08-2005, 04:56 PM

What do you mean? I don't know what is going on in a64 tweaker , I just copy other peoples settings and mess around with them a bit :D

2/7/12/2/1/0/2/2/1/1
16x/128bits/D/D/7x/6ns/6.5ns/16cliks/E/200

aCidbAbY

01-08-2005, 08:45 PM

Well. I have a AMD Athlon 64 3200+ Winchester socket 939 CPU with a Venus 12 fan and heatsink ontop of it. Usually runs at around 37 degrees (33 degrees or less when idle... 45 degrees heavy load and 50 degrees + when overclocked to around 2.5GHz)
I ordered it on boxing day from aria.co.uk I did wrtie down the number which was on the chip itself but I have misplaced the piece of paper I wrote it on...

My motherboard is the Abit AV8 type with 256mb of Corsair XMS3700 RAM (sadly running at CAS3 :( ).

My system tends to restart itself if I try to run superpi with the RAM timings altered so it is running equivelent to CAS2.5. The absolute maximum I can get out of my CPU at this curent time is 2.5GHz, anything more and i will just restart itself.

I also have a Radeon 9800Pro which doesnt like 3d benchmarking when my system is overclocked (anything over about 2.2GHz and it will randomly halt my system...)

I hope this helps, I will try to get hold of that number for you ASAP.
Alec

dude your gonna have to divide your ram and find the max cpu OC.
then lower the cpu multi and find the max ram OC.

after that you can find a good medium. :toast:

sounds to me like you need to do some reading first though bro.
you will find that all the stickies here are very helpful.
ive gotten to were i read more than i post here now:)

Adasi

01-09-2005, 05:58 AM

Alec - I would be very glad if you find the piece of paper with the chip numbers.
Danke :D

I'm still looking for a cpu and I can't find 41st week. Does anyone know anything about 50 week? Still can't find any info about it... :(

Paa`

01-09-2005, 04:12 PM

Having boot problems and cant figure it out..

htt @ 370 * 8 with default vcore np anything above 370 htt and pc crashes but anyway.

I use 300 htt with 133 ram devider so ram is running at 200 2-2-2-5 multi @ 8 x
cpu speed 2400 primes stable this is when i clock it from within windows. ( clockgen )

But if i try to set these settings in the bios pc wont even boot into the bios gets stuck on the first screen.

a64 3500
msi k8n neo2
1.36 beta bios
using sata 3
fan ( chassis ) plugged into cpu header.
cpu is prime stable at these speed's just wont set in bios and boot :/

dont mind the vcore in the screenie was trying to rule out voltage problems.

CP-Geek

01-09-2005, 06:56 PM

Just had some fun with my K8T Neo2-FIR (Vdimm modded) and 0447 3200+

Too bad my BH-5 ain't doing more than 250 with 2.0-2-2-5 with this board (They did 265 on DFI LP). This sucker is just screaming for Vcore mod!

CP :)

Th3__W00T_GuY__

01-10-2005, 03:54 AM

what do u guys think of this one?

ADA3200DIK4BI
CBBHD 0450UPMW

should i buy it?

DevilsRejection

01-10-2005, 11:30 AM

week 50, yea why not

Adasi

01-10-2005, 11:34 AM

But have anyone had this week before?
I mean made o/c tests

Brandybuck

01-10-2005, 05:30 PM

A64 3000+ 939 0445 spbw :toast:

http://img50.exs.cx/img50/8926/28s9sz.jpg

aCidbAbY

01-10-2005, 05:56 PM

is the 3000+ week 42 worth buying? i can get one for 150$ should i buy?

jjcom

01-10-2005, 05:58 PM

I'd wait and see if a newer week shows up...I don't think 42 is too bad tho if you do need a chip...

jjcom

aCidbAbY

01-10-2005, 06:09 PM

even for 150$

trans am

01-10-2005, 06:10 PM

wait for 0501

jjcom

01-10-2005, 06:54 PM

yeah, thats what I'm thinking as well...the newer the week the better some of the Winchesters are getting, so lets hope that trend holds true into 2005

jjcom

Rage710

01-10-2005, 07:32 PM

im still figureing out the bios. But ive gotten 2.6 ghz
http://img119.exs.cx/img119/2171/wow8cd.jpg

but im currently running 2.5
http://img119.exs.cx/img119/4193/untitled4dv.th.jpg (http://img119.exs.cx/my.php?loc=img119&image=untitled4dv.jpg)

Chr0n1c

01-10-2005, 07:43 PM

0444 XPEW

On Venus12 w/ as5 @ 2.7Ghz Pi benchable:
2700Mhz & pi's (http://img87.exs.cx/img87/1527/stuff6tm.jpg)

And only screenshot stable so far (same cooling):
http://img22.exs.cx/img22/5456/2800mhzfinally5aa.jpg

Been to busy to work on it more. Damn school & work.

Rage710

01-10-2005, 07:48 PM

On Venus12 w/ as5 @ 2.7Ghz Pi benchable:
2700Mhz & pi's (http://img87.exs.cx/img87/1527/stuff6tm.jpg)

And only screenshot stable so far (same cooling):
http://img22.exs.cx/img22/5456/2800mhzfinally5aa.jpg

Been to busy to work on it more. Damn school & work.

You suck! :stick: j/k m8 nice stuff :D

WesM63

01-10-2005, 08:25 PM

well this is my best thus far.. completly un-tweaked. 0444VPMW 1.65vcore, stock air cooled (yes boxed cooler)

http://www.dataeclipse.com/wes/27winnie.jpg

robocopy

01-11-2005, 02:22 AM

trans am

01-11-2005, 07:03 AM

My 3200+ Winnie (0433SPMW) Dry Ice cooled.

http://hem.wasadata.net/2501/turez/3200+/3206MHz1.JPG

More prints: http://hem.wasadata.net/2501/turez/3200+/
Rig Pics: http://hem.wasadata.net/2501/turez/DI/

Nice job man! It was worth the headache from the fumes. :toast:

PS, nice DI container too.

Alec

01-11-2005, 10:25 AM

I have been talking to one of mytechie friends and he said that the reason why I cant seem to get above 2.5GHz is because my motherboad and RAM is not designed to run at anything above 250MHz FSB. He said that cooling and quality of RAM is the key component. I have Corsair XMS3700 RAM (CAS3) which can go upto over 500MHz FSB and I have a Venus 12 CPU fan. With the fan on max and the cpu core voltage set to 7.5V / 7.25V my cpu runs at 50 - 60 degrees with the fan full on.
What temparatures do you all get when runing at higher FSBs than 250MHz?

Thanks,
Alec

Darkboss

01-11-2005, 12:48 PM

i get from 33C-54C at load w/ 260x10, and 265x10. and 285x9. But the temps on this Neo2 are pretty inaccurate. Now I'm at 33C w/ the side panel off my case. System temp always stay @ 19C-25C at load and sometimes higher at idle according to bios.

Jupiler

01-11-2005, 12:57 PM

My 3200+ runs @ 2620 (262*10), 1.46-1.47V, using WC.
Temps under load are between 43-45°.

Alec

01-11-2005, 01:46 PM

Ah right, Watercooling seems to te the way to go then.
I am getting mroe case fans within 2 weeks htough so that should lower my ambient temps.

Thanks for the feedback,
Alec

robocopy

01-11-2005, 06:07 PM

Nice job man! It was worth the headache from the fumes. :toast:

PS, nice DI container too.

Thanks! Yes it was! But I felt a bit light-headed
almost all the time ;D hehe

Thanks again. I will go for a new try soon.

Jort

01-13-2005, 01:20 PM

got me a winnie too.
specs:
Amd 64 3000+
MSi k8n neo2 platinum 0412
ocz pc3500 gold rev3(next week some pc4400 gskill 2x512 )

ADA3000DIK4BI
CBBGD 0439VPEW
1095757J40029

could manage 2.650 mhz on stock Vcore, stock cooling, everything stock :p:
going to apply some wc on it after 2-3 weekes( still have to produce it):p
here ar some from me and a friend of mine: http://www.madshrimps.be/forums/showthread.php?s=&threadid=11857

http://upload.pio.be/jort/amd64/screen@2650.JPG

going to test some more today and tomorrow.

:toast:

Adasi

01-13-2005, 01:27 PM

Wow, nice o/c there. :toast:
Is it bench or prime stable?

Jort

01-13-2005, 01:33 PM

i'll try prime, benchmarks are not going to run here(x800 is busted, tomorrow going to shop to rma)
running mx 420 pci :p

runned superpi 16M
vcore isn't stock didn't saw that, srry :D
http://upload.pio.be/jort/amd64/amd64stock.JPG

ISS

01-13-2005, 04:48 PM

Just read your article. Great info. However, I just wanted to point out that passing Prime95 doesn't mean system is stable. I have experience personally CPU running 2 instances of Prime95 (Max FPU stress and Max heat) for over 12hrs w/o any problems but won't run UT2004 and HL2 properly.

Thus, stability can't be tested on just Prime95, have to loop games like UT and 3Dmark as well.

jikdoc

01-13-2005, 05:14 PM

like to add about prime95 and stability. if it does pass prime, chances are more likely that freezes, instability with games are due vga overclock/driver issues, game config files etc. i tore my hair out trying to get hl2, d3 stable on a system that passed prime. it was only when i scaled down my gfx oc and or removed some game config tweaks that things became stable. that being said, the same gfx overclock that was hl2/d3 unstable was stable looping 3dmark.

achaye

01-14-2005, 02:02 AM

I have no clue how you guys get such crazy OC at such low voltages. Mem is 2x512 Corsair Value Select at 166:200.

I'm Prime stable at 250x10 for 24 hours, didn't try longer, at that voltage, but anything above that is meh :confused:

At 248x10.5=2605Mhz, I can only Pi up to 64k at that voltage :(

caligula

01-14-2005, 02:33 AM

Guys, please make a habit of also reporting if your o/c is prime stable or not. It's good for the community looking for the good steppings.

Dunk

01-14-2005, 10:39 AM

Guys, please make a habit of also reporting if your o/c is prime stable or not. It's good for the community looking for the good steppings.

I still have to pluck up the courage to bother removing my xp-90 and getting that info. I've hit it's limits with heat at 1.6V upwards and have a star ice sitting idle here. Eventually when I get bored I'll install it and do that as it is a nice clocker and I'm sure it will hit 2.8Ghz plus at 1.8V. stable at 2.7 @ 1.55 atm

mad mikee

01-14-2005, 12:15 PM

ADA3200DIK4BI
CBBHD 0444XPMW
1144087K40023
Occt (like that program :D ) and prime stable

Presently burning in some new XBL 2x.5G @ 10x 260
prime stable overnight, see 'his' in sig :D
Putting old XBL (also prime stable at same speed) into my wifes computer over the weekend - hers is up to 240x10, should get better w/ new mem :hehe:

Will post screens after I get to something resembling a 'final' place for a while (will try out the mach 1 someday)

(And yes I will set up D2ol for the gang after I am at theat point - gotta keep the house warm for the winter :banana4: ).

Just another note after reading some more of the above.
Heavy load temps are always about 48-50c, 4 chips, 2 dif coolers, 4 diff. fans 4 diff compounds, on the desk in the bsmt or in a case.. Just luck I guess :shrug:

Alec

01-16-2005, 05:03 AM

My latest record.

Specs:
AMD Athlon 64 3200+ (Winchester)
ABIT AV8
256MB Corsair XMS3700
Radeon 9800Pro
Venus 12 cpu fan

Managed to benchmark 3dmark 2k1 when overclocked to 2.4GHz
http://host366.net/pics/overclock/omfg.JPG
Managed to benchmark in SuperPi when overclocked to 2.65GHz
http://host366.net/pics/overclock/65.JPG
I had to make the RAM much more high latency to cope with the high FSBs. Thats why the SuperPi score is quite bad considdering the speed my CPU was running at. I am looking to get some much better, low latancy Corsair RAM in the future, though.

I did try 2.7GHz but pc locked up... Shall try later on when it has cooled down.

Thanks,
Alec

L0$t Pr0PhEt

01-16-2005, 05:15 AM

Nice cpu Alec, try @ 1.6v vcore, you should be able to hit higher speeds.

NiSMo

01-16-2005, 05:20 AM

just a quick question, which bios are most of u guyz using? cos i had abit of troulbe with 1.5b1 bios..im currently using bios 1.4b1mod

specs are

MSI k8n neo2 plat
3200+ (CBBHD 0447UPCW)
2x512 mushkin lvl2 V2 (TCCD)
550W Antec Truecontrol
Gecube x800 pro vivo

thanx guys :)

funkflix

01-16-2005, 05:24 AM

1.36 Beta, bcs. of the higher Vcore and it works fine with BH5 and TCCD!

http://people.freenet.de/funkflix/3018mhz.jpg

Max. Screenshot with "normal" roomtemps.

Jasonhk

01-16-2005, 05:32 AM

2/7/12/2/1/0/2/2/1/1
16x/128bits/D/D/7x/6ns/6.5ns/16cliks/E/200

Sorry only saw this now,

Thanks . I will try them ! :)

Alec

01-16-2005, 05:53 AM

I have the latest BIOS update for my AV8. (Think its 1.7)

There is some kinda glitch with my CPU-Z... The core voltage was actually set to 1.75V not 1.4V

Thanks for the postive feedback!

Alec

[B]attery

01-16-2005, 12:27 PM

http://photobucket.com/albums/v511/battery/cpu-2835.jpg

mmmm

DeNs

01-16-2005, 05:10 PM

ADA3200DIK4BI
CBBHD 0444XPMW
1144087K40023
Occt (like that program :D ) and prime stable

Mine's the same week and code as yours. Runs fine at 250x10 1:1 2.5-3-3-7 2.85v (OCZ Plat R2 TCCD). When I try a higher HTT/Lower Multi, like 9x275, it can prime & StressCPU for hours on end, but :banana::banana::banana::banana:up when doing normal things.

As i'm currently between going from water to phase, i'm stuck with air for now. Still, it's annoying me as i'm pretty sure this thing can do better.

---dens

Chr0n1c

01-16-2005, 05:21 PM

attery']http://photobucket.com/albums/v511/battery/cpu-2835.jpg

mmmm

Thats one awesome chip you have. cooling?

Darkboss

01-16-2005, 08:29 PM

Thats one awesome chip you have. cooling?

I agree and are you using any dividers or straight 1:1? What was the stepping?

[B]attery

01-17-2005, 08:38 AM

i'm runnin' 1:1 not sure the stepping i didn't pay much attention...anyway it more of a project chips for me lol...runnin' completely stock cooling as of now...even got the stock thermal paste =)...all about the low ambient temp lol i've been sticking my computer out the window as it hits -12C out at night...and i do my overclocking and benching at night...not much of an issue sence i'm practically nocturnal for the most part...of course...its -11C right now...brrrrr

gubben

01-17-2005, 12:03 PM

My 3200+ Winnie (0433SPMW) Mach2
http://upl.silentwhisper.net/uplfolders/upload7/3-2gig.gif
http://upl.silentwhisper.net/uplfolders/upload2/superpi.gif
http://upl.silentwhisper.net/uplfolders/upload8/3DMark01.gif

Ferry82

01-17-2005, 12:42 PM

Motherboard and Videocard Gubben?

gubben

01-17-2005, 12:50 PM

Sorry.
MSI K8N Neo2 Platinum , Mach 2 R134.
A64 3200+ CBBFD 0433SPMW
OCZ Platinum rev2
Ge Cube X800xt pe 80W pelt, 650/623

mad mikee

01-17-2005, 12:50 PM

Running w/ Zonealarm Sec. Suite (FW + AV), Acoustic Edge sound panel.
Spi (old unpatched) 1m=31sec, 4m=2m35s.
S&M passes both Full CPU and Mem.
OCCT - PASS
Prime 2.38 14+ hrs blend w/ mem correction because of stuff above running (still running)
3dk201 = 22500
Is this any good for this setup? :shrug:

Will try to get Vcore lower later in week

Cranox

01-17-2005, 02:50 PM

Quik test A64 3500+ , week 50
Boxed cooler and crappy noname 300 watt power suply :D

=[PULSAR]=

01-17-2005, 02:54 PM

Cmon Cranox more volts :)

yotomeczek

01-17-2005, 03:03 PM

My F... Winny:

ADA3000DIK4BI
CBBID 0451 EPEW
1169679A50402

Max 2,5GHz Super Pi 1M stable with 1,8V !!!! :mad:
2,3GHz not stable @ 1,65v ...

Chr0n1c

01-17-2005, 05:15 PM

attery']i'm runnin' 1:1 not sure the stepping i didn't pay much attention...anyway it more of a project chips for me lol...runnin' completely stock cooling as of now...even got the stock thermal paste =)...all about the low ambient temp lol i've been sticking my computer out the window as it hits -12C out at night...and i do my overclocking and benching at night...not much of an issue sence i'm practically nocturnal for the most part...of course...its -11C right now...brrrrr

Haha nice. :cool:

No Mercy

01-17-2005, 11:31 PM

My winnie 3000+ 0444 on Hyper 6 screenshot:

http://img66.exs.cx/img66/4628/27g1am.jpg

qk4722

01-18-2005, 05:36 AM

3200+ 0433SPMW
MSI K8N NEO4 Ultra
TCCD 256MB Dual
SPARKLE 6600GT PCI-E
XP-90+4500RPM fan

perry_78

01-18-2005, 05:53 AM

3200+ 0433SPMW
MSI K8N NEO4 Ultra
TCCD 256MB Dual
SPARKLE 6600GT PCI-E
XP-90+4500RPM fan

Nice nice nice ;)

Seems to me that a lot of people have the 6600GT now. The money left over from my downgrade from the 6800GT to the 6600GT paid for my upgrade to the DFI + A64 ;)

Alec

01-18-2005, 02:33 PM

Managed to do SuperPi at 1M in 35 seconds flat.
Had to mod my RAM timings so it ran at CAS2.5 and had my cpu overclocked to 2.6GHz

Alec

Chr0n1c

01-18-2005, 02:39 PM

3200+ 0433SPMW
MSI K8N NEO4 Ultra
TCCD 256MB Dual
SPARKLE 6600GT PCI-E
XP-90+4500RPM fan

Ok that is just insane :eek:

Darkboss

01-18-2005, 09:42 PM

Managed to do SuperPi at 1M in 35 seconds flat.
Had to mod my RAM timings so it ran at CAS2.5 and had my cpu overclocked to 2.6GHz

Alec

Alec what stepping do you have?

Alec

01-18-2005, 11:25 PM

FSB Multiplyer x10 (FSB is 260)
HT Multiplyer x3

Kamerat

01-19-2005, 04:39 PM

Got a 3000+ that posts at 3,2GHz (9x355) and 3,25GHz (9x361) with 1,8V cooled by a Mach II R404a, all this is on a Neo2. But I'm actually having trouble doing 2,8GHz stable, but I'm not finnished testing yet. :)

dymONE

01-19-2005, 04:43 PM

My winnie 3000+ 0444 on Hyper 6 screenshot:

http://img66.exs.cx/img66/4628/27g1am.jpg

Nice .. it is a PrimeStable ?

Athens[2004]

01-20-2005, 12:32 AM

Hi nice 2 see you all
this is my firt post in xtremesystems

a64 3.000+

ada3000dik4bi
cbbhd 0447rpdw
1161909l40872

Full stable , game , pi , sandra
Undervoltage 1.33
2X256 3200 cheap ram [cuts me on 230~]
radeon 9500np@9700 350c317m
msi k8n neo 2 platinum

sivlerprop cyclone evo & eheim 1250 & rad whith tank in one,, alreay own
[maybe attach next week]

Anyone sugest for good ram ? ocz platinum 3200 maybe ?

Athens[2004]

01-20-2005, 05:18 AM

update , runs pi but suxx [same time as the 2.4ghz] because of the mem timming....
3-5-15-5 [the only way 2 reach this fsb with twinmos]

No Mercy

01-20-2005, 05:20 AM

Nice .. it is a PrimeStable ?
I dont test with Prime. Winnie hate prime :banana: :banana4: :banana:

dymONE

01-20-2005, 06:06 AM

I dont test with Prime. Winnie hate prime :banana: :banana4: :banana:

And witch programs are good for testing winnie ?

perry_78

01-20-2005, 06:59 AM

Actually many Winchesters can test Prime95 without issues :)

Otherwise there's Stress CPU, Super PI 32M, 3dMark01, folding perhaps?

I must repeat this once again. Winchester is a HORRIBLE name! "Winnie" makes me want to drag some person off the street and inflict random violence upon them... :D

Mrki

01-20-2005, 07:04 AM

new one ...

http://mitglied.lycos.de/siedl/Winchester%203000+%200448%20SPAW/9x300_OCZ_2.5_3_3_7_31sekpi.jpg

Darkboss

01-20-2005, 07:17 AM

new one ...

http://mitglied.lycos.de/siedl/Winchester%203000+%200448%20SPAW/9x300_OCZ_2.5_3_3_7_31sekpi.jpg

What's the stepping? and ram settings?

Dunk

01-20-2005, 07:59 AM

Winchester is a HORRIBLE name! "Winnie" makes me want to drag some person off the street and inflict random violence upon them... :D

They might as well be naming the Winchester - "pooh bear." Newcastles - "Eeyore" and the FX chips "Hunny". Let's not forget the budget "piglet" chips too heh

SuperNova

01-20-2005, 10:39 AM

Hi, I just got my Neo2 working and so far My current specs are:

3000+ @ 2430
1.525 vcore
2.5-3-3-6-1t

Can anyone tell me how to host images, I was going to post a cpu-z screenshot. Thanks

Kamerat

01-20-2005, 01:40 PM

A bit over 300 HTT my system refuses to run any other MEM-divider than 100MHz, happens also with low MP's... :( This is running 1,76V, not 1,45V as CPU-Z shows:

http://home.no.net/comerade/pc/superpi_winchester_3000_362x8,5.png

CyberOps

01-20-2005, 02:08 PM

xit, very very nice Kamerat!! whats the week and code after??

Kamerat

01-20-2005, 02:27 PM

xit, very very nice Kamerat!! whats the week and code after??0447UPCW

TheMeatFrog

01-20-2005, 11:42 PM

Just replaced the pos fan on my thermaltake silentboost with a vantec tornado and my CorsairXMS 3200 with PatriotXBL 3200 today and finally made it to the 2.7 club! :toast: I'm having to run my new mem at a 166 divider cause I can't get it to do 300MHz @2.85v on my Neo2 Plat. Anyone think the OCZ booster on the Patriot 3200 would get me up to 300MHz so I could run 1:1?

Anyways here's my OC...HalfLife2 tested Gamer approved! :D :banana:

dymONE

01-21-2005, 04:31 AM

Buy the memory wtih TCCD and brainpower PCB ;)

This is my setup wtih 2x512MB OCZ 3200 platinum rev.2 with TCCD ;)

http://www.bbpix.com/pix/A64@2700MHz_300HTT.jpg

osipower

01-21-2005, 05:34 AM

MSİNEO2PLN. 3200+@2740MHZ(CBBFD 0433SPMW) RADEON9700PRO/2x512TWINMOSDDR400@550MHZ (1.5-2-2-1)

NiSMo

01-21-2005, 06:38 AM

MSİNEO2PLN. 3200+@2740MHZ(CBBFD 0433SPMW) RADEON9700PRO/2x512TWINMOSDDR400@550MHZ (1.5-2-2-1)

wat kinda cooling is that osipower??

EDIT: also is that stresscpu/prime stable??

osipower

01-21-2005, 09:08 AM

air coling & hyper6
stresscpu/prime stable ok

NiSMo

01-21-2005, 09:20 AM

thats awesome...i just picked up the same stepping cpu, hopefully it is as promising as your result :)

Alec

01-21-2005, 10:13 AM

One nice overclock there, osipower!!! :toast:

Hombre

01-21-2005, 03:39 PM

Those 0433SPMW are beasts. And easy to find here :toast:

=[PULSAR]=

01-21-2005, 04:16 PM

osipower more vcore! =P

Adasi

01-22-2005, 03:03 AM

Damn and i still cannot find any older than 50 week :(

Osipower - nice cpu :toast:

osipower

01-22-2005, 04:39 AM

air coling & hyper6
stresscpu/prime stable 2690mhz ok
vcore 1.6v

CyberOps

01-22-2005, 05:09 AM

Damn and i still cannot find any older than 50 week :(

why, the 50th week stinks?? I've 3000+ 0451 dpaw and hope to have a good clocker
:)

Adasi

01-22-2005, 06:26 AM

Couple of my friends had them and their max clock was about 2500mhz...

Hombre

01-22-2005, 10:58 AM

why, the 50th week stinks?? I've 3000+ 0451 dpaw and hope to have a good clocker
:)

From I've seen they're very average ocers.

legion

01-23-2005, 04:12 AM

I got a week 50 ABPW.
Topped out a 2.6.
Week 48 SPAW here at 2745 at 1.58v.(need more vcore :mad: )

QuikSilver

01-23-2005, 04:35 AM

0450APBW
It can go up to 2.6GHz, but I need 1.65v :(

http://xtremesystems.org/forums/attachment.php?attachmentid=23121

chainhoe

01-23-2005, 05:46 AM

http://www.hot.ee/razor/2500mhz.jpg

0437, 1.425V from bios
MSI K8N neo2
2*256 TCCD
passive watercooling (no rad.)

QuikSilver

01-23-2005, 06:14 AM

0437, 1.425V from bios
MSI K8N neo2
2*256 TCCD
passive watercooling (no rad.)

how did you lower the multi to 8.5 ?

chainhoe

01-23-2005, 06:33 AM

you cant set it to 8.5 from bios?

QuikSilver

01-23-2005, 06:46 AM

you cant set it to 8.5 from bios?

I thought they were locked?

EDIT: wow, the lower multis are unlocked! I just changed mine to 8.5, I am such an idiot :p:

viddax^2

01-23-2005, 07:01 AM

Its not as good as your heavy duty machines but well..

http://img33.exs.cx/img33/6232/264815845nd.th.jpg (http://img33.exs.cx/my.php?loc=img33&image=264815845nd.jpg)

Winchester 3200+
ADA3200DIK4BI
CBBFD 0435 XPAW
1089917I40485

Msi Neo2 Plat

1x512 Nanya (suxxx) pc3200

C Ya

Alec

01-23-2005, 07:03 AM

woah! Very well set up there, viddax^2 :toast:

perry_78

01-23-2005, 07:10 AM

Hey, not all of us can afford one CPU a week.

I still have to bench mine though, once the motherboard ships in.

Quite surprising result with an XPAW. "X" chips tend to suck big time :)

Yeh, Week 50 doesnt do too well. Neither does 46 i read, Week 48 seems to be outright best. I wonder where that silicon came from ;)

legion

01-23-2005, 07:29 AM

Week 48 SPAW 1:1

http://img.photobucket.com/albums/v260/legion100/mem305.jpg

viddax^2

01-23-2005, 07:30 AM

woah! Very well set up there, viddax^2 :toast:

xD, nothing to do with those turbocharged winnies! :D

Now ive bought neo4 plat and im going to try 2x 512 Vx + booster, think i con reach more than 2700 with 1.6 ( the HTT was 340x3, and at a point it restarted suddenly...)..
here superpi @ 2600, that nanya is ruining all the experience :rolleyes: ...

http://img126.exs.cx/img126/2310/2600mhz1m31s7bz.th.jpg (http://img126.exs.cx/my.php?loc=img126&image=2600mhz1m31s7bz.jpg)

See ya :toast:

QuikSilver

01-23-2005, 07:39 AM

New result, lower multi + upping fsb to 292 gave me 1sec better in superpi :cool:

http://xtremesystems.org/forums/attachment.php?attachmentid=23122

Athens[2004]

01-23-2005, 11:55 AM

a64 3.000+ msi k8n neo2 platinum 256X2 twinmos dual

Finish my watercool handmade kit and search for the limits of the cpu with my twinmos 256X2.

still searching.

boblemagnifique

01-23-2005, 11:57 AM

New result, lower multi + upping fsb to 292 gave me 1sec better in superpi :cool:

http://xtremesystems.org/forums/attachment.php?attachmentid=23122

Good :toast:

My Winnie + Gigabyte K8NS ultra + BH5 2/2/2/5 + Box AMD (vio 3.92/vddr 3.8/3.85v)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi31s2.PNG

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi29s2.PNG

No patch ;) A64 Tweaker Only

chainhoe

01-23-2005, 02:48 PM

pi just loves BH5, cant get anywhere near those scores with TCCD...

HipHop.Ru Murda

01-23-2005, 03:38 PM

Week 48 SPAW 1:1

http://img.photobucket.com/albums/v260/legion100/mem305.jpg
What kind of memory have u got?

HipHop.Ru Murda

01-23-2005, 03:41 PM

Good :toast:

My Winnie + Gigabyte K8NS ultra + BH5 2/2/2/5 + Box AMD (vio 3.92/vddr 3.8/3.85v)

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi31s2.PNG

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi29s2.PNG

No patch ;) A64 Tweaker Only
What BH5 have u got man?

Zebo

01-23-2005, 03:45 PM

My Winnie + EPOX 9NDA3J + Ballistix 241 2.5/2/2/7 + Box AMD week 37

Not xtreme here, a 24/7 comp...I just wanted an FX-55 for $150..got there safly:)

http://www.csc.calpoly.edu/~smanning/28.JPG

Mrki

01-23-2005, 04:25 PM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

http://mitglied.lycos.de/siedl/Winchester%203000+%200448%20SPAW/9x300_OCZ_2.5_3_3_7_32mpi.jpg

Jupiler

01-24-2005, 12:50 AM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

Very nice.
Is that the one you sold yesterday?

viddax^2

01-24-2005, 02:42 AM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

:slobber: :slobber: :slobber:

Simpy great, iwant one of those...

perry_78

01-24-2005, 02:47 AM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

:slobber: :slobber: :slobber:

Nothing short of amazing! Can you give us the FULL stepping, including lot #?

caligula

01-24-2005, 03:16 AM

0444TPMW is the same.
Let me see some prime95 action before I get all wet :D

NiSMo

01-24-2005, 03:40 AM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

http://mitglied.lycos.de/siedl/Winchester%203000+%200448%20SPAW/9x300_OCZ_2.5_3_3_7_32mpi.jpg

all i can say is that i am very very impressed.... :slobber:

boblemagnifique

01-24-2005, 04:45 AM

What BH5 have u got man?

4*256 Adata BH5 (WE 0313) (use 2*256 only )

boblemagnifique

01-24-2005, 04:47 AM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

http://mitglied.lycos.de/siedl/Winchester%203000+%200448%20SPAW/9x300_OCZ_2.5_3_3_7_32mpi.jpg

CBBHD 0448 SPAW is best stepping for Winnie :toast:
The best 0448 spaw stable Prime 2.8ghz 1.4/1.45v -> Box AMD :slobber:

K32A

01-24-2005, 01:00 PM

Ey guys.

Im going to sell my 0437 vpcw, and buy another and better one.

If its going to be a 3000+ winny, then wich stepping should i go for, I have these options:

CBBHD 0447SPAW
CBBHD 0446SPDW

And if its going to be a 3200+ winny I can choose one of these:

CBBHD 0447TPDW
CBBHD 0447UPDW
CBBHD 0447RPMW
CBBHD 0447UPBW
CBBHD 0447SPAW

Thx ;)

funkflix

01-24-2005, 01:04 PM

I would take the 0447SPAW 3200+! :)

Jort

01-24-2005, 01:04 PM

mine goes sweet too,(3000+)
0439VPEW

2.7 ghz stock vcore, stock cooling

skematix

01-24-2005, 01:06 PM

gonna post up speeds soon.....can't wait

QuikSilver

01-24-2005, 01:06 PM

mine goes sweet too,(3000+)
0439VPEW

2.7 ghz stock vcore, stock cooling

How much do you want for it? ;) :D

Jort

01-24-2005, 01:09 PM

not for sale :)

there are not mutch chances to own a 0029 batch :D
or maybe there is, in the shop they had 0032 and 0049 too.
sold i guess :)

K32A

01-24-2005, 01:13 PM

I would take the 0447SPAW 3200+! :)

That was what i expected ...

How high do you think it would go at stock voltage ? :confused:

SET

01-24-2005, 01:29 PM

In which stores have obtained 0448 SPAW?

I wish a 3200 + for me... :slobber:

Thank you

amilian

01-24-2005, 01:58 PM

I'd get the CBBHD 0447SPAW

Alec

01-25-2005, 04:28 AM

Broke the 2.7GHz barrier... on air! :D

Alec

amilian

01-25-2005, 06:36 AM

Broke the 2.7GHz barrier... on air! :D

Alec
Congrats! Now all ya gotta do is break the 32sec 1M superPI and you'll be competitive. :D

Athens[2004]

01-25-2005, 09:53 AM

on 2.72ghz benchable with 1.44vcore.

at 2.79ghz needs 1.61 strange ha?

does'nt matter,.

Alec

01-25-2005, 11:19 AM

Congrats! Now all ya gotta do is break the 32sec 1M superPI and you'll be competitive. :D

Thanks, amilian!
I did manage to run superpi at 2.65GHz with my RAM tightened to CAS2.5 and managed to do it in 34 seconds.

I am considdering buying some nice OCZ VX RAM and possibly a RAM booster. Then I should get superPi results within 32 seconds; I may also be able to get higher FSBs outa my RAM so I could overclock even further.

Another option I am thinking of is getting watercooling or vapour phase change cooling....

Thanks for the feedback,
Alec

Tempest25

01-25-2005, 11:38 AM

mine goes sweet too,(3000+)
0439VPEW

2.7 ghz stock vcore, stock cooling

Couple questions if you will...

What settings are you using? (i.e. 9x300) What RAM?
Where'd you purchase it from and when?

Mrki

01-25-2005, 02:28 PM

new one

vapo ls ...

http://mitglied.lycos.de/siedl/Winchester%203000+%20SPAW%200448%202/Vapo/9x334_2.5_3_3_7_pi32m.jpg

Adasi

01-25-2005, 02:33 PM

What stepping etc ?

CyberOps

01-25-2005, 03:05 PM

0448 SPAW

Zalman Air ...

MSI NEO4 Diamond SLI
OCZ EL Rev.2 TCCD
Ati x700

http://mitglied.lycos.de/siedl/Winchester%203000+%200448%20SPAW/9x300_OCZ_2.5_3_3_7_32mpi.jpg

i think its the same
:slobber:

did you sold your 3200+ MPM?? what was the max in your vapo??

Adasi

01-25-2005, 03:32 PM

But he wrote that it's a new one :P

Mrki

01-25-2005, 04:14 PM

3200+ MPM dont work with vapo ... but its a damn bad cpu! on air max 2.4ghz

:(

/edit
other spaw ;)

dX.

01-25-2005, 06:56 PM

At the moment all the 3200's are pretty much sold out in Australia so I'm looking at a 3000+ for my DFI NF4-Ultra (which comes next week). I've found a 0447 TPCW. Anyone ever heard of/seen this stepping before? Give it a go, or give it a miss. What do you reckon?

Kueller

01-25-2005, 09:00 PM

3000+
0441 UPEW
XP-90
MSI Neo2 Plat. 1.4 bios
PDP pc3200 XBL
The ram is interesting, I can run 2.5-3-3-10 up to 283MHz, but I can't run any tighter at 241MHz.
31s 1M, 27:57 32M Pi times, and of course, a screenie:
http://www.maplehurst.net/images/pi32.jpg

Athens[2004]

01-26-2005, 01:15 AM

Update .
a64 3.000+
k8n neo2 platinum
2X256 twinmos

No Mercy

01-26-2005, 11:53 AM

This is my 3000+ 0431 with Hyper 6 and Mushkin Level 2 with OCZ booster.

http://img173.exs.cx/img173/6813/300x9divider56superpi32m5xr.jpg

Adasi

01-26-2005, 03:03 PM

I received my cpu today. That's what i did with it :)
Week 0441
Box cooled

PS. I will try to o/c it more later of course :D

Dirt

01-27-2005, 05:27 AM

Just got my new Winchetser

ADA3500DIK4BI

CBBHD 0450SPBW

and batch 228

deep

01-27-2005, 10:02 AM

Just got my new Winchetser

ADA3500DIK4BI

CBBHD 0450SPBW

and batch 228

Me too, allthough i don't know about the batch (how do i tell?). Anyway i'm still waiting for the rest of my stuff. Oh and i'm totally new at this stuff wich you probably figured out with this being the first post and all.. Hello! :)

LikwidKool

01-27-2005, 01:16 PM

welcome Deep! enjoy;)

So we have some nice winnies here. I would love to see if any of these 2.7ghz+ oc's would benefit from water cooling. My 3500+ 0437 does 2.7ghz at 1.65 on water. Never tried air cooling but just wondering if water is even helping at all.

Gonna have to pick up a new post week 40 winny anyway. Hopefully I'll get the 2.8ghz+ I have been trying to achieve. I wanna break 30sec super pi. At 31 sec right now.

Jort

01-27-2005, 01:31 PM

i am going to run wc cooled when my blocked is milled.
i'll sure post the results and any difference between air and water.

max airstable was about 2750 on 1.45V

this is going to be the block => http://users.telenet.be/jortcollijn/wcblockA64.JPG

caligula

01-27-2005, 03:30 PM

I bet 80% are not prime stable.

CyberOps

01-27-2005, 03:34 PM

I bet 80% are not prime stable.

LOL :wierd:

cpulloverclock

01-27-2005, 05:52 PM

Somebody knows if a high VBT of 3.32v (normally 1/2 vdimm but the vbt was higher than the vdimm) can kill an A64 or just a big 3.3v line?
An Integrated DDR memory controller is depend on the 3.3v line and vbt???

I dont know if my mb or A64 is dead

Thx

Zebo

01-27-2005, 10:57 PM

Zebo

01-27-2005, 11:07 PM

I bet 80% are not prime stable.

I bet us that are running 32M are. I think 1M is a joke anyway as it's not representative enough of true perfromnce nor stablilty.

for example.. a dothan at 2.0 vs A64 @ 2.0 dothan wins.. but gets slaughtered at 32M because of crap bandwidth..

Dirt

01-28-2005, 03:50 AM

Wich one of these would you choose? All are 3500+

CBBID 0450WPAW
CBBHD 0450TPGW
CBBHD 0450UPAW
CBBHD 0450VPBW
CBBHD 0450SPCW
CBBHD 0450SPBW
CBBHD 0450VPAW
CBBHD 0450UPNW

FX Freak

01-28-2005, 08:09 AM

i´ll buy a new 3500+ winchester, and i can choose from this:
450UPAW
451EPMW
450GPMW
which one would you choose?

V1nce

01-28-2005, 08:22 AM

@Dirrt: I would try the UPxx if I were you. Good stepping imo

i´ll buy a new 3500+ winchester, and i can choose from this:
450UPAW
451EPMW
450GPMW
which one would you choose?

If I were you, I would try the 0450 UPAW. I've got a winnie (3200+) UPcW and that's a nice one :cool:

vkbms

01-28-2005, 11:47 AM

My Winny 3000 Stock cooled
Msi Neo2 noMod bios 1.36 beta
2*512 A-Data Vitesta ddr 600 (2.5-3-3-5 @ 305mhz)
Win2003 Server
Maxtor DMP 8 30 Giga (Waiting for Raptor in warranty)

http://img179.exs.cx/img179/9947/275031s8zk.jpg

Waiting for liquid cooling :banana:

PS: But the subzero problem is resolved or not? I want to buy some dryice :D

CyberOps

01-28-2005, 01:55 PM

just tested in bios 3000+ 0451 dpaw 295fsb with 1.55vcore

Dirt

01-28-2005, 02:33 PM

I got the CBBHD 0450SPBW with last four numbers 0129

FX Freak

01-28-2005, 03:29 PM

@Dirrt: I would try the UPxx if I were you. Good stepping imo

If I were you, I would try the 0450 UPAW. I've got a winnie (3200+) UPcW and that's a nice one :cool:

thx:)
other opinions?
what the max clock with your upcw?

Kueller

01-28-2005, 05:44 PM

Nice ram wow.. I've never seen TCCD run that tight that high...
Sorry for the small size of the screens, I shrank them a bit too much for the quality.
http://www.maplehurst.net/images/Mem285-1.jpg
Everest says
8033mb/s read
3143mb/s write
Sandra says
7552mb/s int.
7449mb/s float
Why sandra and everest read scores are so different, I don't know...But the 8k in everest was cool. Those benches were taken at 285, which isn't totally stable, memtest comes up with a couple errors, as will a 32M pi run, which is why I said the ram is really only stable up to 283 with those timings. But it's a moot point, since it won't do 295 1:1 which is what the processor wants so I run it with a 183 divider via A64 tweaker.

vlad

01-29-2005, 06:11 AM

0450UPBW on air. :D

TheMeatFrog

01-29-2005, 10:48 AM

0450UPBW on air. :D
Is that 300MHz on GSkill ram, if so LA or LE and 2x512 or 2x256? I have the exact same chip/week/steppings and 2.7 even is as far as I can go. Let me know your results! :banana:

funkflix

01-29-2005, 11:15 AM

A few new results of my watercooled 0433SPMW. :-)

http://weber-steuerungstechnik.de/overclock/under40.jpg

http://weber-steuerungstechnik.de/overclock/3120mhz.jpg
(pressed print to fast...cpuz don't get the mhz ... )

http://weber-steuerungstechnik.de/overclock/3000mhzspi.jpg

http://weber-steuerungstechnik.de/overclock/277mhz.jpg