PDA

View Full Version : Official Winchester OC Thread!



Pages : 1 [2] 3 4 5

dnottis
11-29-2004, 09:57 AM
I had a 433SPMW that wouldn't prime at 2.4 GHZ. I dont see what the big deal is with them, they are still as unconsistent a week as any other AMD64. I managed 2.5 GHZ (278 x 9 1:1) @ 1.6 with my week 437 3500+.

Here is a pic of the CPU before I sold it.
http://www.3dxtreme.net/other/IMG_0098.jpg

Pimp!
11-29-2004, 11:12 AM
Why not try to sell it off and get the more 'tried and tested' batches of winchesters. Namely the 0433XPMW, 0440MPMW and 0441TPMW. 0433XPMW being the best so far but almost impossible to find now.



i recieved a week 41 from monarch on wednesday last week, was sent out on monday last week.

EDIT: does 2.6 (10x260) stably @ 1.5v, right now testing 2.65 (10x260) @ 1.53v

the 2.6 one was stable as a rock, before i came to work this morning, i did 32m superpi and passed it (at 2.65ghz). but didnt have much time to do other stuff other than superpi.

trans am
11-29-2004, 11:24 AM
i recieved a week 41 from monarch on wednesday last week, was sent out on monday last week.

EDIT: does 2.6 (10x260) stably @ 1.5v, right now testing 2.65 (10x260) @ 1.53v

the 2.6 one was stable as a rock, before i came to work this morning, i did 32m superpi and passed it. but didnt have much time to do other stuff other than superpi.
ditto on the week41 3200+ doing 2.6 stable. I had 2 week 41 oem. 1 from newegg and one from monarch. they are both the same 2.6 stable on air.

geosin
11-29-2004, 11:28 AM
All this on stock heatsink/fan?? This is with regards to the 3 week 41s ...

trans am
11-29-2004, 11:31 AM
All this on stock heatsink/fan?? This is with regards to the 3 week 41s ...

well mine were both tested on my friends neo2 with a xp90/panaflo. I have watercooling, so I might get them a little higher.

Pimp!
11-29-2004, 02:02 PM
mine is on thermalright xp-90 w/92mm tornado

gocchin
11-29-2004, 04:19 PM
Well my first post at XS. I've been lurking around and learning a lot.
Thanks for everything! Here's my OC of a 3200 winchester 0435TPAW:
HTT 3x 1.632v 250 1:1 2-2-2.
I got about the same results using Mushkin BH-5's and OCZ Platinum Ltd. Ed. BH-6 at 3.4v.
All on air with a Thermalright XP-90 + Panaflo 92mm fan.
I guess it's alright for a 3200+ but I was hoping for more :shades:

http://www.jpop.com/03.jpg

geosin
11-29-2004, 06:20 PM
Nice OC ... 33sec with 2.5ghz is GOOD :P ... all thanks to your super tight ram timings. OCZ Booster I presume?!? Or Vdimm Mod?!?

After all the info I've collected, it really seems that if u keep the temps down on the winnies ... u can keep it stable at higher clocks with lesser volts.

gocchin
11-29-2004, 06:28 PM
Nice OC ... 33sec with 2.5ghz is GOOD :P ... all thanks to your super tight ram timings. OCZ Booster I presume?!? Or Vdimm Mod?!?

After all the info I've collected, it really seems that if u keep the temps down on the winnies ... u can keep it stable at higher clocks with lesser volts.


Yup using the booster. It's great. I OCed it a day after I put the system together so hopefully the AS5 will settle and give me a few degrees :)

stelleg151
11-29-2004, 07:09 PM
ditto on the week41 3200+ doing 2.6 stable. I had 2 week 41 oem. 1 from newegg and one from monarch. they are both the same 2.6 stable on air.

You got lucky with monarch, I just got mine from them and is week 35, we will see how it OCs.

Edit: BTW, anyone have a 043*TP*W Chip?? I think the second letter is different for 3000, 3200, and 3500 but the first letter has to do with the date, not sure though. Thanks

kemist
11-29-2004, 11:23 PM
0441 rpmw 3200+ was hoping for at least 2800, think i can get a bit more than 2750, but i dont think 2800 is possible with this chip. Water cooled rbx nozzle 5, with dual 120 heatercore from dangerden and 2 panaflo L1's pulling, also have my 6800gt in the loop, laing d4 pump. 1gig ocz plat 2 rev2 on that shot at 1:1 3,4,4,10 t2. havent really tweaked it much, just built it a few days ago and had a paper to write for school

VNet
11-30-2004, 12:44 AM
3200+ week 37 here.. It can't do anything higher than 2,3 or 2,35 Ghz prime95 stable... and with 1,55v.. week 37 seems to be bad for o/c ! :(
(with stock cooling btw, waiting for a XP-90 but don't thing it will change anything apart from less degree.)

shinymod
11-30-2004, 02:49 AM
i had a 0433spmw 3200+ that would only do 2600, now i have a 0441tpbw 3500+ that i'm sure i can make do at least 2700....

gocchin
11-30-2004, 04:21 AM
You got lucky with monarch, I just got mine from them and is week 35, we will see how it OCs.

Edit: BTW, anyone have a 043*TP*W Chip?? I think the second letter is different for 3000, 3200, and 3500 but the first letter has to do with the date, not sure though. Thanks


Mine is 0435TPAW 3200+. I got it to 2508mhz on air, BH-5 1:1 2-2-2, screencap a few posts above.

shinymod
11-30-2004, 12:31 PM
hot damn! it seems the .5 multi thing is a heap of :banana: !! i'm currently at 9.5x275 stable and i know for a fact that this northbridge will do no more than 275 stable! an interesting point to note is that msi core center reports 9x290 whereas cpu-z reports 9.5x275.... now if i could only make it give me a little more FSB to get 9.5x285 stable...

boblemagnifique
11-30-2004, 03:53 PM
Mine is 0435TPAW 3200+. I got it to 2508mhz on air, BH-5 1:1 2-2-2, screencap a few posts above.

My 3200+ CBBFD 0435 TPAW "1"
Gigabyte K8ns ultra
Not optimised
Not stable
Desynchro
4*256 Adata BH5 2/2/2/5 a 2.85v
Aircooling Box
Vcore : 1.6v bios

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/sandracpu2667mhz.png

stelleg151
11-30-2004, 04:44 PM
bob, Im not sure you want be running with all 4 dimms, because the Im pretty sure with all 4 dimms you will be running at 2T command rate. Try doing benchmarks with 2 dimms.

Badge56
11-30-2004, 07:11 PM
Running a 3200+ 0437 RPDW at 2450 (100%) sable.
I am wondering about the reported temps.???
My Hydrocool200 that I used with a 2600+ Barton @ 2600 mhz would rize to 33C in the sumer time on heavy load. System was stable.

With the same cooler the Winchester runs 27C on heavy load at 2450 mhz
(Still as fast as a 3800+)

However the CPU sensor UGuru tells me it rizes to 55C on heavy load..
The Barton would NEVER go over 50C but the water would rise to 33C
Withe the Winchester water never goes over 27C but CPU is a 55C
Why ??

The sensor on the CPU is very different or the temps are wacked.

Abit AV8

I beleive that its RAM that holds us back. Mine wont even run at DDR400
and its Corsair PC4000
The Mushkin L2 222 wont even run when both are in the system.

geosin
11-30-2004, 07:41 PM
Actually ... I kinda get the feeling that the AMD winnies run cool at idle but really rack up the heat during 100% utilization....

Wonder why your ram isnt performing?!? Tried different slots? Are u sure u are using the right dimms for dual channel. When I plugged in my ram into the wrong slots for my Neo2 (slot 1 & 3) I got tons of errors and can't run anything other than ddr400.

Go download Z-cpu to check if your ddr is running right. I suspect your problem lies there.

stelleg151
12-01-2004, 12:08 AM
With the same cooler the Winchester runs 27C on heavy load at 2450 mhz
(Still as fast as a 3800+)

I would say closer to 4000+, the winchesters at 2.35 = newcastle at 2.4 so winny@2.45=? newcastle+1mb L2cache@2.4

Machiavelli
12-01-2004, 08:00 AM
I am putting together a new system and I just recieved a new 3000+ winne from newegg
CBBFD 0437RPCW. Sorry no benching till I can pick up an NF4. My 6600gt, tccd and a hyper 6 will have to sit idle for a few more weeks. I just thought i would post the chip week in case people are wondering whats floating arround.

geosin
12-01-2004, 08:04 AM
Why not get the XP90 instead of the Hyper6 ... oh man ... just thinking abt 1kg of weight on my socket will give me sleepless nights. I hope u are placing your motherboard horizontally ... :P

Joor
12-01-2004, 08:09 AM
Hmm wierd..
running 9x250 atm with 1.42 volt only, becuz i cant set it higher in bios.
Its 1.41, and max is 1.55 i can see!?
Temp are 36 idle in bios on cpu

geosin
12-01-2004, 08:24 AM
u have to use the option 3.3%/5%/8/3%/10% above VID in combination with your Vcore. VID=Vcore. Say u want 1.65v ... u need to set vcore to 1.425 and VID to 10% = 1.75v undervolts to 1.65v (normally undervolts by 0.1v in most cases)

Machiavelli
12-01-2004, 08:35 AM
I went with the hyper 6 because people seem to be getting good results with it and I didnt want to pay an additional $15 for a good 90mm fan when I already have few good 80mm fans

boblemagnifique
12-01-2004, 10:00 AM
3200+ @2297mhz -> 35s Superpi :banana4:
Giga K8ns ultra (vmod vddr)
270x8.5 (2/2/2/2) (vddr 3.7v ...)
+3.3v = 3.82v
2*256 pc 3200 Adata BH5 We0313
Aircooling box

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/superpi35s2.png

W4nK5ta
12-01-2004, 10:36 AM
a64 winchester 3500+ 1,6 v @ stock hsf(as5), 2x 256 mb corsair bh-5 @ 3,4 v...

http://img124.exs.cx/img124/8027/SuperPI1M-A64350026GHz.jpg

boblemagnifique
12-01-2004, 03:09 PM
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/superpi31s.png

Wingless
12-01-2004, 03:40 PM
a64 winchester 3500+ 1,6 v @ stock hsf(as5), 2x 256 mb corsair bh-5 @ 3,4 v...

http://img124.exs.cx/img124/8027/SuperPI1M-A64350026GHz.jpg
Did you lower your multiplier?I thought i wasnt reasonable to lower CPU multipliers???
If u did so could u tell me why?

MaxxxRacer
12-01-2004, 10:04 PM
Well guys I just ordered my 3200 winnie from monarch. It will be here on friday. I will get the stepping on it to compare. It will be with my k8n neo2. Should be interesting. Be the first system ive built that hasnt been socket A.

CTKP
12-01-2004, 10:13 PM
I've got another winchester coming tomorrow, a 3200+ this time, will post some results. Good luck with your cpu racer.

dnottis
12-01-2004, 10:13 PM
Did you lower your multiplier?I thought i wasnt reasonable to lower CPU multipliers???
If u did so could u tell me why?

To get a higher bus speed (Hyper transport). 260 x 11 probably wouldn't be possible and 236 x 11 is nothing special. He's running DDR520 at 260.

dnottis
12-01-2004, 10:14 PM
I've got another winchester coming tomorrow, a 3200+ this time, will post some results. Good luck with your cpu racer.

http://www.3dxtreme.net/other/3200%20wk41/IMG_0301.jpg

Just got this today... so far nothing special - about the same as my 3500+ 437 (2.5GHz) trying to push 2.6 now.

MaxxxRacer
12-01-2004, 10:21 PM
dnottis: I saw some other week 41's that did alot better than yours. i was seeing 2.8ghz from them. Hopefull you get good results

ctkp: thanks for the words of faith. but ive only had one good clocking chip and it blew up on me within 2 months of purchasing it.

dnottis
12-01-2004, 10:28 PM
I still can't break 2.5 ugh. Can't prime at 2.6... I'm stuck at the same spot. this is the 4th winnie. I'm done :( I can superPI 8M but can't prime for more than a minute and it dumps.

geosin
12-01-2004, 10:36 PM
Are u sure its not your settings that are holding u back? Have u tried swapping it with better cooler to see if it is temps that are holding u back? Maybe u are feeding it with too little volts (Neo2 undervolts by 0.1v) Try giving it 1.6v measured from Z-cpu. Ram timings too tight? Try using multipliers to relax the mem timings to find out max speed of cpu first.

Sorri if I insulted u with these 'newbie' suggestions ... just trying to help :D

dnottis
12-01-2004, 10:41 PM
OCZ 520 Watt PSU, XP90 with 52 CFM TT Silent Cat for cooling. Running 1.63v. Got the 3500+ to 278 x 9 1.6v stable was the best I could prime at. Using Corsair XMS4400C25 memory (2x512) 2.5-4-4-8.

UPDATE - I managed to get 278 x9 stable with 1.55 volts using the new 3200. Still stuck right around 2.5 Ghz. Same as before. I don't know what else I can do here. I've removed my drives, sound card - only have essentials and I just cannot push it higher. Seems limited by something but can't for the life of me figure out what. Prime will fail within a few mins over 2.5 GHz. Either Prime just sucks or I have really bad luck that all 4 winnies I've had don't overclock well...

SupremeKoala
12-02-2004, 06:34 AM
you guys should try 3000+ 0441spmw
it has much opportunity to get to 2550~2700MHz @1.36~1.42V

http://www.coolaler.com/ipb/index.php?showtopic=31590
http://www.coolaler.com/ipb/index.php?showtopic=30761
http://www.coolaler.com/ipb/index.php?showtopic=30586
http://www.coolaler.com/ipb/index.php?showtopic=30412

Sentential
12-03-2004, 05:36 AM
Well Im having mobo issues myself otherwise I'd have higher. Here is what Im using now
http://img.photobucket.com/albums/v180/Sentential/CBI.jpg

Max stabilitiy seems to be round 2.54 with any volts (aka mobo issue). Im gonna keep it there until I get a replacement

CPU:
Winnie 3200+
CBBFD 0433 SMPW

@ 2.53 @ 1.52v

esdee
12-03-2004, 06:29 AM
Well Im having mobo issues myself otherwise I'd have higher. Here is what Im using now
http://img.photobucket.com/albums/v180/Sentential/CBI.jpg

Max stabilitiy seems to be round 2.54 with any volts (aka mobo issue). Im gonna keep it there until I get a replacement

CPU:
Winnie 3200+
CBBFD 0433 SMPW

@ 2.53 @ 1.52v


i was having a few issues making my winch stable (eer 32mb spi stable) at high Vcore (1.55-1.7) at around 2700Mhz, found out that setting 1.55 V from Bios was for some reason the problem , now at 1.5V+8.3 (1.6 true vcore)it runs fine 32mbspi
give it a try!

eraser
12-03-2004, 01:39 PM
http://service.futuremark.com/compare?2k1=8281293

3000+@2646mhz,1.65V watercooled.
Cant gain more mhz with 1.73V :(
Maybe FSB is on the Limit with this Board.

MaxxxRacer
12-03-2004, 04:12 PM
Well I got my 3200 winnie today.. here is what it said on it.

ADA3200D1K413I
CBBFD 0441UPBW
1128935j40235

I got it from monarch a today. Ordered it on wednesday. Im running it at 2.5ghz . I will have pifast super pi and 3dmark01 benches soon. Still trying to find out how fast this thing will go.

But sadly my memory sucks hardcore.. IT cant even take 230fsb at any timings... so its memory divider for me.

Well it appears that this chip tops out at a measly 2.5ghz.. if i put the htt one mhz above that the chip doesnt like it. and i tried at pretty much all the voltages... from 1.6 to 1.79 volts... ohwell.. its still faster than my 2.8ghz mobile chip.

Now i just need some good memory so i can put the htt up really high in 1:1 ratio

geosin
12-03-2004, 06:26 PM
Just worked on my friend's mobo ... man .. its sucks big time!!
His Neo2 is only able to do up to 230HTT no matter the timings or voltages.
Its a good thing his NB fan is spoilt. At least he has another chance to getting a better board.

This incident has made me very content with my mobo which is able to do 315HTT .... :D

MaxxxRacer
12-03-2004, 07:02 PM
hmm. i wonder what htt my mobo can do...

andyOCZ
12-03-2004, 10:49 PM
Just worked on my friend's mobo ... man .. its sucks big time!!
His Neo2 is only able to do up to 230HTT no matter the timings or voltages.
Its a good thing his NB fan is spoilt. At least he has another chance to getting a better board.

This incident has made me very content with my mobo which is able to do 315HTT .... :D

I would be interested in knowing what that board would do with a proven high HTT CPU. I really think the memory controllers on some of the new A64 939's are just bad. The BIOS and memory controller have more influence that the board IMHO.

Zanr Zij
12-03-2004, 10:59 PM
Winny 3200+ Highest Clock on WaterCooling

http://img.photobucket.com/albums/v509/ZanrZij/A64/CPU/CPUZHighest.jpg


http://img.photobucket.com/albums/v509/ZanrZij/A64/CPU/SSHighest.jpg

geosin
12-03-2004, 11:26 PM
true ... may be just a bad chip ... my friend was in a rush to buy the 3000+ ... ended up with a week 37 .. which i think are one of the worst out there ...

andyOCZ
12-03-2004, 11:32 PM
true ... may be just a bad chip ... my friend was in a rush to buy the 3000+ ... ended up with a week 37 .. which i think are one of the worst out there ...

LOL, i bought a week 37 90nm 3500+ that was a waste of money. It won't run much over 240mhz. Bah! ;)

MaxxxRacer
12-04-2004, 12:02 AM
Well i deffintely know my memory controller is good. got my htt up to 290 right now... But the cpu wont do a mhz over 2500... ohwell..

geosin
12-04-2004, 12:09 AM
Man ... I told him not to buy .. but he wouldn't listen .. oh well, serves him right :D

Hmm ... I will update more when he changes the mobo and gives another shot at overclocking ... just to make sure that the 'htt is dependent on chip' theory is true

Sauron_Vie
12-04-2004, 04:19 AM
MSI K8N Neo2
2*256 pc 3500 Corsair Rev 1.1 BH5
Aircooling box

muzz
12-04-2004, 07:18 AM
you guys should try 3000+ 0441spmw
it has much opportunity to get to 2550~2700MHz @1.36~1.42V

http://www.coolaler.com/ipb/index.php?showtopic=31590
http://www.coolaler.com/ipb/index.php?showtopic=30761
http://www.coolaler.com/ipb/index.php?showtopic=30586
http://www.coolaler.com/ipb/index.php?showtopic=30412

Thats the chip I just got last night....
Still learning my way around the 64 platform, and have to use the stock amd hsf for now, not gonna bother hooking up WC solution, going str8 to prommy when the kit gets here.

NonProphets
12-04-2004, 08:49 AM
Hey guys, i got the 3000 winnie and In the bios I'm running the volts @ 1.65, but cpu-z shows 1.55. I heard about winnies undervolting, but can this just be a motherboard issue reporting it wrong? Im on the K8N neo 2 on the 1.41 beta bios.

stelleg151
12-04-2004, 02:56 PM
MSI K8N Neo2
2*256 pc 3500 Corsair Rev 1.1 BH5
Aircooling box

nice, what week is your chip??

geosin
12-04-2004, 06:05 PM
Its a known fact for the mobo to undervolt by 0.1v ... nothing to be alarmed abt, just the way it is :D

NonProphets
12-04-2004, 11:57 PM
Its a known fact for the mobo to undervolt by 0.1v ... nothing to be alarmed abt, just the way it is :D

well the thing is, i have the 3500 939 (.13) and it doesnt undervolt it. So I'm not sure. How can I really find out by testing or by Msi support that its undervolting?

geosin
12-05-2004, 01:50 AM
I honestly find no difference when running 285fsb 1:1 with 2.5/4/4/8 as compared to running 220fsb with 2-2-2-5. In fact, running with lower timings resulted in better performance. The only benchmark to benefit from the high FSB 1:1 is sandra mem bandwidth.

Can anyone provide info to prove that running 285fsb 1:1 with loose timings is better than running a lowr fsb with tightest 2-2-2-5 timings??

qk4722
12-05-2004, 02:08 AM
ADA3200DIK4BI
CBBFD 0433SPMW
1058936H40510

MSI K8N NEO4 Ultra
Apacer Real500 TCCD 256x2 2.7v
Aircooling Box

http://home.pchome.com.tw/club/qk4723/3200/2700.jpg

jjcom
12-05-2004, 08:21 AM
well the thing is, i have the 3500 939 (.13) and it doesnt undervolt it. So I'm not sure. How can I really find out by testing or by Msi support that its undervolting?

With a NW/Claw, it will give the correct voltage when set in the BIOS, but with a Winchester it will give .1 below what you set it to.

stock for 130nm 1.5v
stock for 90nm 1.4v

jjcom

Sauron_Vie
12-05-2004, 08:53 AM
@stelleg151: 0440 MPMW

G|-|oST
12-05-2004, 09:05 AM
ADA3200DIK4BI
CBBFD 0433SPMW
1058936H40510

MSI K8N NEO4 Ultra
Apacer Real500 TCCD 256x2 2.7v
Aircooling Box

http://home.pchome.com.tw/club/qk4723/3200/2700.jpg


I still can't believe my CPU of the same stepping is doing 2500MHz max Prime stable... :brick: :brick: :brick:

esdee
12-05-2004, 09:52 AM
If you are like 'oh my god my winnie fails at prime95' check this out ...

http://xtremesystems.org/forums/showthread.php?p=622796&posted=1#post622796

bachus_anonym
12-05-2004, 09:57 AM
here's what i just posted in "Athlon A64 overclock record" thread.... i'm kind of excited so i'll post it here to in case not everyone checks that other thread out:

here's my GO at A64 S939 - 270x10=2700MHz @ 1.63v REAL, DDR540 6-2-2 cas2, OCZ DDR Booster 3.7v

MSI K8N Neo2 Platinum - Q47353.1 0440A2 S Taiwan
A64 3200+ 90nm "Winchester" - CBBFD 0441UPCW
Thermalright XP-90 w/ YTech 120mm

CLICK for Full Size Screenshot - 2048x1536 384KB

http://www.xtremesystems.org/forums/attachment.php?attachmentid=20513 (http://www.clockmehigh.com/xtreme/Neo2/270x10_SuperPi_ALL.jpg)

This is max SuperPi 32M and 3dMark2001 stable.... 265x10 is my 24/7 usage so far :)

FX Freak
12-05-2004, 01:27 PM
has somebody A new 3500+ winchester with KW440 or higher?

MouseSeries
12-05-2004, 02:01 PM
Is Good?

Week

ADA3200DIK4BI
CBBFD 0437RPCW
1122547 J40461

Msi N8N Neo2 NB= 047353.1 0440A2 STAIWAN

Thnks :D

Zanr Zij
12-05-2004, 04:43 PM
Is Good?

Week

ADA3200DIK4BI
CBBFD 0437RPCW
1122547 J40461

Msi N8N Neo2 NB= 047353.1 0440A2 STAIWAN

Thnks :D

Ur CPU is not very good...I think so ( no rule is right 4 all ).. Best choice same to be 0441 n 0433..

Ur Mobo is good... same same me :D

trans am
12-05-2004, 05:03 PM
Right now I'm trying to find my max cpu clock. I think I found it. Now it's time to get my ram sweetspot matched with the cpu.........
Week 41 3200+ oem from monarch /1.6vcore
watercooled
2700 is prime stable / 2750 is 3d stable
this is in single channel 1x512 VX gold at 225mhz 2-2-2-10 1T
2m run in superpi
neo2 1.36 bios

http://xtremesystems.org/forums/attachment.php?attachmentid=20547&stc=1

aCidbAbY
12-05-2004, 05:13 PM
so guys do you think it is a good bet to just stay with the 3200 winnie and hope for the best or, should i spend the extra cash to get the 3500 winnie?

trans am
12-05-2004, 05:18 PM
....................................3500+ imo

aCidbAbY
12-05-2004, 05:27 PM
thx trans:Dam

trans am
12-05-2004, 07:48 PM
thx trans:Dam

It's just that you get more multi options with the 3500+, Also you need to note that right now AMD has no better 90nm cpu than the 3500+....... What this means is that when AMD speed-bins the winchester cpu's, the fastest chips will be put in the 3500+ speed bin. Normally you would have the 3800+ and FX to compete with, but since they are 130nm right now, they are excluded from the speed bin, putting the best 90nm into the 3500+. I would probably wait until after January for latest stepping.

MaxxxRacer
12-05-2004, 08:09 PM
trans am. you got lucky. I just got my 3200 week 41 oem from monarch and it tops out at 2.5... your a lucky guy... that is the cpu that i was hoping to get.. lol.. I wonder what I would have gotten if i waited and purchased the 3500...

trans am
12-05-2004, 08:24 PM
LOL! here are the screens with the el4200 platinum 1:1!!! 31s superpi is awesome! Tonight must be my lucky night! phase change on the way! hurry up Reggie!!! oh, AND THIS IS NO BULLCRAP post high screens and run! THis is 100% Prime95 torturetest Blend stable!!!!!
http://xtremesystems.org/forums/attachment.php?attachmentid=20567&stc=1

amilian
12-05-2004, 08:33 PM
wtg trans am! congrats.

trans am
12-05-2004, 08:57 PM
ADA3200DIK4BI
CBBFD 0433SPMW
1058936H40510

MSI K8N NEO4 Ultra
Apacer Real500 TCCD 256x2 2.7v
Aircooling Box

http://home.pchome.com.tw/club/qk4723/3200/2700.jpg

This is odd, I expected your 1m run to be lower than 31s. We have the same clockspeed, but your ram is going much faster than mine, but we both have 31s in superpi. Is this 2T?

geosin
12-05-2004, 10:03 PM
Oh man .... 2700 at 1.4++ volts is insane!!
Don't tell me those are the venerable 0433s

MaxxxRacer
12-05-2004, 11:02 PM
transam.. 1.45 volts and 2700 and i have to put 1.6v in this thing to get 2.5. how sad is that... and that other guy is running below spec voltage and is at 2.7ghz... this is pissing me off...

geosin
12-05-2004, 11:18 PM
luck of the draw dude .....

TrIx
12-05-2004, 11:18 PM
does anyone know any good probes to check the cpu tampand stuff on the net that i can download my asus probe is just crap and needs updateing

qk4722
12-05-2004, 11:20 PM
This is odd, I expected your 1m run to be lower than 31s. We have the same clockspeed, but your ram is going much faster than mine, but we both have 31s in superpi. Is this 2T?

I sure it's 1T
My pics (http://home.pchome.com.tw/club/qk4723/3200/1T.JPG)

trans am
12-06-2004, 05:39 AM
I sure it's 1T
My pics (http://home.pchome.com.tw/club/qk4723/3200/1T.JPG)

well have you been able to do 30s run? 300mhz at those timings in dual channel , I would expect ram bandwidth bench to be over 8k in sandra and 30s in superpi.

Th3__W00T_GuY__
12-06-2004, 05:45 AM
damn i cant get over 283 htt :(:( any hints?

trans am
12-06-2004, 06:00 AM
damn i cant get over 283 htt :(:( any hints?

try the 1.51 bios

read the 939 mobo thread.

http://www.xtremesystems.org/forums/showthread.php?t=46730

Th3__W00T_GuY__
12-06-2004, 06:05 AM
actually i read it...:( and many guys had problems with 1.51 so i dont what to flash it. wehen i drop multi i can reach 8*320 easily (prime stable!!) why?

Torin
12-06-2004, 06:07 AM
This is odd, I expected your 1m run to be lower than 31s. We have the same clockspeed, but your ram is going much faster than mine, but we both have 31s in superpi. Is this 2T?

It has to be 2T.. 7884 MB/s @ 300FSB & 2.7GHz... if 1T, it should be more like 83xx or so, right?

lio
12-06-2004, 06:12 AM
actually i read it...:( and many guys had problems with 1.51 so i dont what to flash it. wehen i drop multi i can reach 8*320 easily (prime stable!!) why?
when you use the 8 multi what is the speed of your ram did you checked it i don`t think you can make 320mhz with your ram

qk4722
12-06-2004, 06:28 AM
well have you been able to do 30s run? 300mhz at those timings in dual channel , I would expect ram bandwidth bench to be over 8k in sandra and 30s in superpi.

If you have 256MB ram can up to DDR600 use 9multi try it thx !~

300Mhz can't run 30s in superpi. at 306x8 2.5-3-3-5 1T 2.85v superpi 30s bandwidth 8067MB/S
pics (http://home.pchome.com.tw/club/qk4723/3200/8067.JPG)

lio
12-06-2004, 06:39 AM
i made 30sec in super pi wit 333ht and ram at 266 at cas2 2-2-2-5-7-16 and cpu speed at 2660 the bandwich eficency in sandra is 89% this is so {as i figgered out} because the ram is too fast for the prosesor at that speed to have bandwich at about 96% the cpu have to be at least 200mhz more i mean if i ran the ram at 266mhz the cpu should be about 2900-3000mhz for the bandwich to be 96%
that`s why if you can`t clock your processor more than 2700 you don`t need ram faster than 240-245 mhz cause the cpu doesnot take advantage of the faster ram you can check it with super pi or what ever you have.
that `s why i experienced the low bandwich at dual channel at high ram speeds and high bandwich at the same speed but in single channel
when i lowered the ram speed at the same cpu speed the bandwich eficency grew and reached it`s 97%
so guys you don`t need the ram to be that fast when you are in dual channel if you don`t have the processor for it :) :toast:

trans am
12-06-2004, 07:32 AM
If you have 256MB ram can up to DDR600 use 9multi try it thx !~

300Mhz can't run 30s in superpi. at 306x8 2.5-3-3-5 1T 2.85v superpi 30s bandwidth 8067MB/S
pics (http://home.pchome.com.tw/club/qk4723/3200/8067.JPG)

I don't have 2x256, but I think my 2x512 el4200 platinum can do that. I'll try tonight and see what I get.

esdee
12-06-2004, 10:26 AM
transam.. 1.45 volts and 2700 and i have to put 1.6v in this thing to get 2.5. how sad is that... and that other guy is running below spec voltage and is at 2.7ghz... this is pissing me off...

I would say the real Vcore is about 1.49-1.50,CPU-z shows about .5V less than real

Trans Am can you measure the Vcore?

andyOCZ
12-06-2004, 10:36 AM
damn i cant get over 283 htt :(:( any hints?

Try setting the TRAS to 10. 5 is not good for AMD, It may cause errors and will give you less bandwidth.

Also try 3-3-3-10 and see how you do.

trans am
12-06-2004, 10:58 AM
I would say the real Vcore is about 1.49-1.50,CPU-z shows about .5V less than real

Trans Am can you measure the Vcore?

I just measured the vcore. It's about 5 1/4 inches.

klootzakje
12-06-2004, 11:41 AM
i've got the MSI neo2 plat. with winchester 3000+ and GeIL pc4000 2x512mb DC :)

my highest overclock is 2825mhz windows stable @ 2:1 divider and my CL's are 2.3.3.5

http://pic15.picturetrail.com/VOL583/2915000/5884909/75797302.jpg

Moonman
12-06-2004, 12:13 PM
Voltage, cooling, stepping please.
2.8Ghz is GOOD :toast: , unless it is on phase change.

conrad.maranan
12-06-2004, 12:18 PM
i've got the MSI neo2 plat. with winchester 3000+ and GeIL pc4000 2x512mb DC :)

my highest overclock is 2825mhz windows stable @ 2:1 divider and my CL's are 2.3.3.5

http://pic15.picturetrail.com/VOL583/2915000/5884909/75797302.jpg
How did you manage to fit a socket 754 CPU onto a 939 motherboard? I'm assuming you've got an MSI K8N Neo2 Platinum, as this is a Winchester thread.

slayer899
12-06-2004, 01:52 PM
yeah i was wondering the same thing

Joor
12-06-2004, 02:01 PM
Strong photoshop skillz? :stick:

trans am
12-06-2004, 03:42 PM
klootzakje, could you please post a cpuz screen so we can have it verified? We are not saying you are cheating, it just looks very questionable.

stelleg151
12-06-2004, 04:48 PM
klootzakje, could you please post a cpuz screen so we can have it verified? We are not saying you are cheating, it just looks very questionable.

yes please do, and I am on your side as I have same memory and CPU, so I hope those results are for real, although the ram at 313 does seem pretty questionable.

trans am
12-06-2004, 05:24 PM
yes please do, and I am on your side as I have same memory and CPU, so I hope those results are for real, although the ram at 313 does seem pretty questionable. notice there is not one bench or memory screen to show the outrageous performance that overclock would yield. Most people would be so excited about an overclock like that, they would post as many benches as possible that will fit on the screen. I know I'm not alone on this one. it's also strange that this was his first post ever on xs. very interesting.

Schitzo
12-06-2004, 08:16 PM
I just picked up a 3200+ this week... 0442SPEW on this one. Putting the water cooling together this weekend (have to finish classes first :mad: ) but I'm running 2450 @ 1.40v right now, which is kinda nice. It's been priming for two days at this speed. I can't wait to get it on water.

slayer899
12-06-2004, 08:27 PM
I just picked up a 3200+ this week... 0442SPEW on this one. Putting the water cooling together this weekend (have to finish classes first :mad: ) but I'm running 2450 @ 1.40v right now, which is kinda nice. It's been priming for two days at this speed. I can't wait to get it on water.

where from? and retail or oem? i'll be ordering one soon and i'd like a stepping from week 41 or later

geosin
12-06-2004, 09:20 PM
42 is the latest so far .. saw a few retail 0442TPMW at my local shop.

Riverna
12-07-2004, 12:43 AM
http://www.forumdeluxx.de/gallery/data/500/88862700.JPG

stelleg151
12-07-2004, 01:06 AM
very nice riverna, another week 33 doing very well...

funkflix
12-07-2004, 01:17 AM
http://people.freenet.de/funkflix/spi32m.jpg

geosin
12-07-2004, 01:47 AM
This is getting outta hand ... all these CRAZY overclocks!!
The future looks good for AMD :P

Th3__W00T_GuY__
12-07-2004, 03:19 AM
Try setting the TRAS to 10. 5 is not good for AMD, It may cause errors and will give you less bandwidth.

Also try 3-3-3-10 and see how you do.

ok i set it to 10 but no change :( and @ HTT 293 with 3-3-3-10 i cant even boot^^ with 2-3-3-10 i can but then bluescreen and reboot. I guess ram maxed out at htt 283 or u have any other tips for me? i reach best results at 3.1 V (booster) with a fan blowing on rams of course is this ok for 24/7 u think?

Schitzo
12-07-2004, 04:41 AM
where from? and retail or oem? i'll be ordering one soon and i'd like a stepping from week 41 or later

It was retail, we ordered it from one of our distributors in vancouver. they had just gotten them back in stock.

mad mikee
12-07-2004, 06:19 AM
42 is the latest so far .. saw a few retail 0442TPMW at my local shop.

Do tell where please thanks MikeE

DevilsRejection
12-07-2004, 07:11 AM
newegg is going to be getting some retails in on friday. im talking about the 3500+ mind you not the 3200+, just for the fact that it is known the 3500+ oc's better.

I'm going to be the guinea pig and order one, ill let you guys know the result, as i am sure to bump up the shipping to overnight as i need this :banana::banana::banana::banana: NOW.

esdee
12-07-2004, 07:35 AM
I just measured the vcore. It's about 5 1/4 inches.

huh?

klootzakje
12-07-2004, 07:49 AM
oh guys sorry, ill make the cpu-z screenshot in a minute :) the vcore was 1.63 , i set it @ 1.55 + 10% but the bios says it's 1.63v i read that it undervolts a little, so that's probably it and it's not on phasechange, everything is boxed cooled, and my memory is running @ 100, so 2:1 ;) thats how i got on 313 mhz, but my feeling tells me the cpu doesn't mind goin any further, does anyone have any ideas? i also tried bios 136 and set it on higher vcore, but that didn't help, i also put arctic silver 3 between the northbridge and heatsink, didn't help either
i am running my system on a 350 watt noname PSU (my antec 480 truepower doesn't work with the MSI neo2 somehow, i read somewhere that there are more problems with the antec PSU's and msi neo2), that's why im not using my x800xt atm, but i don't think my PSU is the problem
btw i got it Pifast stable @ 2690 mhz 133mhz mem (also 1.63vcore), it does that @ 46.14 seconds, more vcore doesn't help here either :(
if anybody has any tips or ideas, plz post 'em :P

i'll post my cpu-z printscreen, and my stepping in a few minutes :)

OmegaSys
12-07-2004, 08:57 AM
oh guys sorry, ill make the cpu-z screenshot in a minute :) the vcore was 1.63 , i set it @ 1.55 + 10% but the bios says it's 1.63v i read that it undervolts a little, so that's probably it and it's not on phasechange, everything is boxed cooled, and my memory is running @ 100, so 2:1 ;) thats how i got on 313 mhz, but my feeling tells me the cpu doesn't mind goin any further, does anyone have any ideas? i also tried bios 136 and set it on higher vcore, but that didn't help, i also put arctic silver 3 between the northbridge and heatsink, didn't help either
i am running my system on a 350 watt noname PSU (my antec 480 truepower doesn't work with the MSI neo2 somehow, i read somewhere that there are more problems with the antec PSU's and msi neo2), that's why im not using my x800xt atm, but i don't think my PSU is the problem
btw i got it Pifast stable @ 2690 mhz 133mhz mem (also 1.63vcore), it does that @ 46.14 seconds, more vcore doesn't help here either :(
if anybody has any tips or ideas, plz post 'em :P

i'll post my cpu-z printscreen, and my stepping in a few minutes :)

Does your vcore stay at a constant 1.63 or does it vary? Mine seems to fluctuate constantly.

-OmegaSys

klootzakje
12-07-2004, 09:15 AM
1.61 and 1.63 nothing between, but 1.63 mostly :) same for higher, didn't check it lower :)

Mana
12-07-2004, 09:17 AM
my vcore fluctuates as well, might be contributing to instabilities in prime...

this is with the neo2 btw

Sauron_Vie
12-07-2004, 02:12 PM
Hi,

i can get a Winni 3200+ with stepping 0441 VPMW

Does anybody got some infos about that stepping ??

thx & greeetz

klootzakje
12-07-2004, 02:14 PM
the promised CPU-Z screenshot :

http://pic15.picturetrail.com/VOL583/2915000/5884909/75923766.jpg

and here is my stepping :

http://pic15.picturetrail.com/VOL583/2915000/5884909/75923777.jpg

btw, i said i did the 2825 mhz @ 100 mhz divider, but now i took one of the 2 dimms out, because i read the mobo didn't really like 2 x 512, and liked 2 x 256 more :)
and now i can even boot it @ 2825 with 133mhz divider ;)
but i still can't overclock past it :@ also tried @ 100 mhz divider...

would another mainboard help me out here? or is my cooling maybe stopping me now...?

tomorrow i'll borrow my friend's 2 x 256 pc3200 and try to get a beter pifast and better overclock, pifast might be better, but i don't think the overclock will improve...
still hoping on tips :P

[XC] serlv
12-07-2004, 04:20 PM
Here is my initial OC. Still testing, exploring, tweaking.

This is a retail 3500+
0441 TPAW
2x256 GSkill
Stock cooler

An XP-90 arrived yesterday, but I'm too sick to mess with it right now. By the way, what is the suggested VDIMM for this GSkill? Right now, I have it at 2.85.

I'm curious about .5 multis. Go or no go. If no go, please explain.

MaxxxRacer
12-07-2004, 04:47 PM
.5 multi is fine, but all it does is adjust your fsb to make it seem like your using a .5 multi. I dont think there is any performance hit, but if ur a 304now and ur memory cant take it then it wont be stable. That is unless ur already using a memory divider

[XC] serlv
12-07-2004, 05:20 PM
No divider. Will probably drop down the HTT, though a little bit.

Wishing my Prometeia wasn't broken; waiting on parts... :(

Badge56
12-07-2004, 06:14 PM
Ya what is your HTT divider?

klootzakje
12-08-2004, 04:00 AM
mine? 3x :)

Goli
12-08-2004, 05:43 AM
Winchester 3000+

http://img65.exs.cx/img65/8094/todo8ql.th.jpg (http://img65.exs.cx/my.php?loc=img65&image=todo8ql.jpg)

amilian
12-08-2004, 06:47 AM
mine? 3x :)
When you got that 2.8ghz on 100 divider, what kind of superpi performance did you get???
thanks.

klootzakje
12-08-2004, 07:08 AM
didn't do superpi... i'll try it later today :) on 1m? or 32m? or other? :)

funkflix
12-08-2004, 12:23 PM
Some Primeaction! :)

http://people.freenet.de/funkflix/prime2830.jpg

http://people.freenet.de/funkflix/prime28302.jpg

Maybe it works with less Vcore, but i've not tested it! I'm tired
of Prime ... hours of waiting! ;)

klootzakje
12-08-2004, 01:14 PM
pfff i borrowed a friend his 2 x 256 mb noname cl3 :S what a drama, can't even get my system bus on 270 with 100mhz divider somehow... :S i'll do superpi tomorrow, if i'll have my ram back then ;)

amilian
12-08-2004, 02:39 PM
Here's early days....but it seems I'm hitting a wall at 270HTT with tight timings..... clock too low with the 250fsb, and 270HTT too low to get better than 35sec 1M SuperPI. Gonna have to get a 3200 for the 10 multi.....

andyOCZ
12-08-2004, 03:53 PM
Some Primeaction! :)

http://people.freenet.de/funkflix/prime2830.jpg

http://people.freenet.de/funkflix/prime28302.jpg

Maybe it works with less Vcore, but i've not tested it! I'm tired
of Prime ... hours of waiting! ;)


Nice, but my 90nm always errors P95 at about 3.5hrs tops. Run it all night for us.

Thanks!

bachus_anonym
12-08-2004, 04:02 PM
AndyOCZ, you said all night??? ;) how about 15hrs ???
http://www.xtremesystems.org/forums/showpost.php?p=626981&postcount=91

OCForums_Osirs
12-08-2004, 04:10 PM
Here is mine... not too bad I guess, but Always room for improvement...

2.8ghz - http://www.sevenlabs.net/a64/2.8.jpg
2.75ghz - http://www.sevenlabs.net/a64/2.75.jpg
2.7ghz - http://www.sevenlabs.net/a64/3000.jpg
2.6ghz with 1:1 - http://www.sevenlabs.net/a64/2.6_memory_TCCD.jpg

andyOCZ
12-08-2004, 04:15 PM
AndyOCZ, you said all night??? ;) how about 15hrs ???
http://www.xtremesystems.org/forums/showpost.php?p=626981&postcount=91


GROOVY BABY!!! :banana4:

I guess the week 41's may be the good stuff. The earlier ones are not running P95 Blend at all from what I have seen.

Thanks.

stelleg151
12-08-2004, 06:59 PM
GOLI what week is your chip, and is it stable at that speed?

Goli
12-08-2004, 09:27 PM
GOLI what week is your chip, and is it stable at that speed?

I don´t know what week is my chip, but when i take off the waterblock tomorrow i will tell you, now i am full stable at 2750Mhz but i have some error in Everest home edition and Sandra i don´t know why, anyone knows?

here are some SS:

http://img125.exs.cx/img125/2333/cpuz3zn.th.jpg (http://img125.exs.cx/my.php?loc=img125&image=cpuz3zn.jpg)

http://img125.exs.cx/img125/8162/everest7zv.th.jpg (http://img125.exs.cx/my.php?loc=img125&image=everest7zv.jpg)

http://img125.exs.cx/img125/7898/sandra4qj.th.jpg (http://img125.exs.cx/my.php?loc=img125&image=sandra4qj.jpg)

http://img125.exs.cx/img125/9928/superpicentral1ya.th.jpg (http://img125.exs.cx/my.php?loc=img125&image=superpicentral1ya.jpg)

Anybody have the same thing, that is showing some errors in some softwares?

Mrki
12-09-2004, 02:08 PM
http://mitglied.lycos.de/siedl/0441%20MPMW/10x260_OCZ_2.5_3_3_7_3dmark01_05_superpi32sek.jpg

DevilsRejection
12-09-2004, 02:35 PM
Goli is that ram at 1T?

Mrki
12-09-2004, 03:04 PM
sure ... 2T want be 32sek pi!

Mana
12-09-2004, 03:22 PM
hehe 2T at 32s, htt = 400? :)

pazza316
12-09-2004, 03:37 PM
has anyone got this combination working effectively yet. i have heard their is a beta bios out to sort the low temps problems with Winchester cores on the MSI board. If anyone has got a winni working at sub zero please post a solution

Goli
12-09-2004, 03:39 PM
Goli is that ram at 1T?

Yes is 1T

Goli
12-09-2004, 05:02 PM
GOLI what week is your chip, and is it stable at that speed?


Ok now i have the stepping of my chip how i know what week it is?

ADA3000DIK4BI
CBBFD 0441SPMw
1077009K40333

OCForums_Osirs
12-09-2004, 06:15 PM
your chip is made in te 41st week, 2004
(0441) - my chip is 0437

bachus_anonym
12-09-2004, 06:38 PM
i have a 0444 3500+winchester that is pretty good i think..it can do 2.880 bechable at 1.6v on air..
i put it on phase change for testing and it stops fuctioning at -115c completly stop's..
i have tested 4 chip's now and all are the same -115c and no go...
-50 holding seem's to be the top coldness these winchester's want.
-30c holding seem's to be perfect temp..i can bench my chip 3.1ghz on my gigabyte k8ns ultra wich isnt the best any way's..so i imagine on the msi it might do 3.2/3.3 ghz..
ill post some pic's of every thing after i switch them over to my other pc.
i'll be sitting on the edge on my chair waiting for your adventure with Winnie + Neo2 :) hopefully i'll be putting mine under phase change soon so need to see your experiences with this setup...

amilian
12-09-2004, 09:03 PM
@goli,
which waterblock you got? and what are your temps?
thnx.

FX Freak
12-10-2004, 12:03 AM
wah is the maximum stable with you cpu with 1,6v @air?
can you say me your full stepping?

Goli
12-10-2004, 04:36 AM
@goli,
which waterblock you got? and what are your temps?
thnx.


I have custom waterblocks made it by me and a friend of mine, here are some pics of my waterblocks, i have a temp of 45° full load at 1.65V core with a room temp of 27.

http://www.watercooling.cl/modules/news/article.php?storyid=62

There are some of my blocks :D

amilian
12-10-2004, 04:57 AM
I have custom waterblocks made it by me and a friend of mine, here are some pics of my waterblocks, i have a temp of 45° full load at 1.65V core with a room temp of 27.

http://www.watercooling.cl/modules/news/article.php?storyid=62

There are some of my blocks :D
Nice work and nice temp.
Which retail block would yours currently equate to? I'm trying to get an idea of how my Maze 3 would do, and how well a Zalman7000 air solution would compete with water at 1.65vcore at the same clock speed.
Thanks.

Goli
12-10-2004, 05:50 AM
Nice work and nice temp.
Which retail block would yours currently equate to? I'm trying to get an idea of how my Maze 3 would do, and how well a Zalman7000 air solution would compete with water at 1.65vcore at the same clock speed.
Thanks.

I don´t know very well, here in Chile we didn´t have any retail watercooling system to test, so is dificult to compare my waterblock with some other one.

With the Zalman 7000 maybe you can reach 2700Mhz and a CPU temp of 50-55 full load think.

amilian
12-10-2004, 06:07 AM
I don´t know very well, here in Chile we didn´t have any retail watercooling system to test, so is dificult to compare my waterblock with some other one.

With the Zalman 7000 maybe you can reach 2700Mhz and a CPU temp of 50-55 full load think.
OK, thanks for that estimate. I'm thinking about the same, and that it's not going to be good enough for this chip. It likes temps under 50. I think I'll put my watercooling on it as soon as I get the right block.....my maze 3 doesn't fit.....
Anyone know a good mod for it to make it fit?

joezxk
12-10-2004, 07:57 AM
没必要啊
A64的温度不高
水冷效果不大,除非电压能加到1.8v以上才过瘾

amilian
12-10-2004, 07:59 AM
没必要啊
A64的温度不高
水冷效果不大,除非电压能加到1.8v以上才过瘾
huh?

klootzakje
12-10-2004, 03:05 PM
hey you guys.... i am thinking of buying the OCZ DDR booster, cuz i can't get my mem across 265mhz with this 2.85v.. or do you guys think it's the chipset?

Paa`
12-10-2004, 05:17 PM
Hmm was running 250*10 for a while but was'nt priming stable..

ive got 2 x 512 ballistix pc4000 ddr and atm running it at 2.70 ( in bios ) at 200 fsb.. but the thing ive noticed is that these ram modules get VERY hot??

anyone else notice this.. dont seem to remember my geil ram being so hot.

Not sure exact temp but i would say 70's-80's was red hot to touch.. maybe this is why i cant prime stable or anything at this speed ? even at 200 there red hot too..

klootzakje
12-13-2004, 10:10 PM
i didn't buy the ocz yet... first want some better cooling for my chipset....
last night did some overclocking in the cold garden :D
with this as result :
http://www.geocities.com/kl00tzakje/2934.JPG
http://www.geocities.com/kl00tzakje/45.55.JPG

stelleg151
12-14-2004, 01:51 AM
klootz whats your ram running at?

klootzakje
12-14-2004, 03:06 AM
klootz whats your ram running at?

in the pifast score i used the 133mhz divider so my ram is doing 201 or 202 mhz, in the max overclock i put the divider on 100 mhz which made my ram do 163 mhz
i can't get it higher... so i guess that is because my chipset gets too hot, if anyone has another idea... plz post it ;) i'd love to break 3 ghz :D

Katrin
12-14-2004, 08:51 AM
Hi

i get a 3200+ 0442 SPMW

what can you tell me about this stepping ?

sorry for asking :-(

Katrin

DevilsRejection
12-14-2004, 09:48 AM
Hi

i get a 3200+ 0442 SPMW

what can you tell me about this stepping ?

sorry for asking :-(

Katrin

wow were you get it from? that is the newest week i have seen on this forum so far. what specs are you running?

bofh
12-14-2004, 02:22 PM
Hi,

How about a 3500+ 0437 ?? Any good? I know a guy that is selling one of these, he says it gets 2500mhz@1.45v on air. Should i buy this cpu or should i get a new 3500+ ? The difference is 80€ give or take (about 100$).

Thx! :)

shinymod
12-14-2004, 03:18 PM
man the number of people that can get 2.8 stable is just unfair! i'm stuck at 2.6 on water still! i got that with my old winchester!! on AIR!! ok so i run less volts now but i cant get even 2.7 and it's making me mad! also i cant get my new 1gb bh-5 over 250fsb! i think it may be the northbridge since i can run that at 2-2-2-11 with less than 3.5V but no more even with 3.9V... vht mod here i come =/

viccyran
12-14-2004, 08:50 PM
0441..

1.66v 2700mhz.

so far so good.

scorp
12-14-2004, 10:08 PM
0437 is rumored to be the worse of the bunch. Had 2 0437s and both kind of s****d at overclocking. Guess he got a very lucky one :D

bofh
12-15-2004, 01:20 AM
Hi,

I think i'm gonna give it a try... I'm gonna hook it up on WC, probaby i won't get it any higher than 2.6Ghz stable.

chainhoe
12-15-2004, 02:56 AM
MSI K8N Neo2
Winchester 3000+ (0437)
256 PC4500 Adata Vitesta (samsung TCCD)
Stock cooling

http://www.hot.ee/razor/2640mhz.jpg

FX Freak
12-15-2004, 03:03 AM
yeah i have a brandnew stepping:D 0444XPEW

plx
12-15-2004, 03:56 AM
This is what I've reached with box cooling all around. Gotta get a 7700 cu soon :p:

The CPU can run 2750 without beeing able to run prime, and 2600 prime stable...

bofh
12-15-2004, 04:26 AM
@plx:

What's the production week on that 3500+ ?

plx
12-15-2004, 01:55 PM
I really don't know yet... haven't got any cooling paste, so can't take off the cooler... I forgot to write down the stepping before assembling the rig :(

I will post stepping before the end of the week... 7700cu should be up and running then ;)

Btw: why asking ? :)

But I got it from the first sending that reached Denmark in the beginning of november...

bofh
12-15-2004, 02:19 PM
I'm just checking production date's on 3500+ to get an idea which are the better ones, yours seems nice.

BTW, that 3500+ 0437 i talked about it's probably messed up, the owner told me that it probably has a bad memory controller... Probably gonna get a 3200+ coz 3500+ are hard to find these days here in Portugal...

plx
12-15-2004, 03:07 PM
Mine is a week 43...

note: a 7700cu does fit an Abit AV8 mobo, right?

Empyrial
12-15-2004, 04:31 PM
Hey everyone, I am done OC'ing until I get my new PSU (ill explain why later)...here is my results:

3200 Winnie @ 1.6v , I don't know how to find week etc help?
320HTTx3LDT --> 8x multiplier (PSU can handle more) :banana:

Patriot XBL ($100 highly recomended for budget OC'ing)--->166 Divider (256 3-4-4-7 @ 2.9v but again varies due to PSU)

and of course MSI K8N Neo2 Trat modded 1.37 BIOS....

2560mhz on air with 50C load temps :) (35 or so idle).

Basically my PSU is getting overloaded (Antec Truepower 350W), and this doesn't allow me to add more fans, it won't increase my vcore or vdimm past 1.6/2.8 usually, and it prevents from decent overclocking on my 6800nu (no 16 pipes :( )

Screenies!

O yes and behold....my piece of :banana::banana::banana::banana: v-rails...just look at that how I am supposed to do ANYTHING with 3.22v on 3, 4.92on 5, and 11.66 on 12v WTF! Im getting an xconnect in about two weeks and then doing a case mod with two high CFM fans (one blowing right at my smartfan, and another as an exhuast, it should lower the temp to about 45 degrees or so I am hoping. I will also try and decrease my vcore and see how stable it is :).



O yes, One more thing,what would be best running 256 with 3-4-4-7 timings and 320HTT with the 166 divider or soemthing else? I just got the whole setup 2 days ago, and day 1 was installing everything :p. Please give suggestions to keep current settings or soemthing else....

Katrin
12-15-2004, 08:16 PM
wow were you get it from? that is the newest week i have seen on this forum so far. what specs are you running?

from www.mindfactory.de for a week.

the problem is, that i dont still have a nf4 board. therefore i can not test the cpu... :-(

Katrin

FX Freak
12-16-2004, 11:15 AM
buy an NF3 board;)

Katrin
12-16-2004, 11:18 AM
buy an NF3 board;)


ok, but i have an x800xt pci-e @home...


Kati

qk4722
12-16-2004, 04:58 PM
0.09 3200+0433SPMW
MSI K8N NEO4 Ultra 0443 A3
Apacer Real500 TCCD 256MBx2
XP-90+SanyoH4011

http://home.pchome.com.tw/club/qk4723/qk4722/3200.jpg

http://home.pchome.com.tw/club/qk4723/qk4722/acTCCD.jpg

http://home.pchome.com.tw/club/qk4723/3200/28001.jpg

daysleeper
12-16-2004, 05:31 PM
0441..

1.66v 2700mhz.

so far so good.

I had 3 x 3200+ 0441 and best went through superpi8m 2550Mhz 1,65V.... :(

bofh
12-17-2004, 04:36 PM
I got a 3000+ Winchester today. It's a 0444. Here's a screenie with super pi i got in 30 mins of playing.

www.siliconservers.net/34s.jpg

:D

Oh, and btw, it's on stock cooling for now.

Wingless
12-17-2004, 08:53 PM
I got a 3000+ Winchester today. It's a 0444. Here's a screenie with super pi i got in 30 mins of playing.

www.siliconservers.net/34s.jpg

:D

Oh, and btw, it's on stock cooling for now.
what kind of memory have u got?Good timings as well....

bofh
12-18-2004, 06:41 AM
It's OCZ PC3200 Plat. Rev.2 TCCD. They can do better, they were relaxed in purpose.

muzz
12-18-2004, 08:56 AM
My 3000+ winnie(0441 SPMW I think) will do SPI and pifast at 2650 ( 32 sec SPI).
I just got a new 3500+ NC ( 0438 Spew), and this hunk a junk wont even do 2530 !!

Gee I'm sure glad I bumped up to the higher multi's..... :rolleyes:

stelleg151
12-18-2004, 04:16 PM
very nice results qk, you got a sweet chip, and 30sec 1m is huge for air.

bofh
12-18-2004, 07:04 PM
Just got 33s superpi 1m on the 3000+ winnie, and max 2871mhz non benchable. Should get 32s with mem 1:1. :)

Wingless
12-18-2004, 07:48 PM
Just got 33s superpi 1m on the 3000+ winnie, and max 2871mhz non benchable. Should get 32s with mem 1:1. :)
What is your memory speed @ 2871? is it 1:1?if it is not 1:1 what is it?

bofh
12-18-2004, 07:55 PM
It's not 1:1, i think it was 166 divider, probably around 261. I'll reproduce it in a bit and post the right numbers. I'm trying to use the A64 Tweaker, but it's not working, i set something and it sets back the previous value. And it's showing mixed up values.

Edit: It was 133, mem at 205. Gotta try 150 divider with superpi. :)

Edit2: Mistakenly i was using slot 1&2 for memory, changed it to 3&4 and just got 32s.

http://www.siliconservers.net/32s_1.jpg

spacey
12-19-2004, 07:32 PM
i have a week 37 3200+, and i couldn't go higher than 225 mhz 1:1 but i decided to play with the mem divider...

now i'm running 9 x 280 on the cpu and 229 mhz on the ram. did super pi, but i haven't tested anything else. just thought i'd share with any unfortunate week 37 ppl... maybe the memory controller can't handle faster speeds. but u can always use the mem divider to increase the cpu speed only.

TKD
12-20-2004, 01:30 AM
I picked up one of the newest winchesters i've seen the other week [0444]. Haven't had much time to test it, but so far i've had it prime stable at 255x10 with only 1.52v to the core.
I can't seem to get much past 250HTT at the moment due to all these I/O problems but i'm gonna see how far it goes as soon as they're sorted.

da_ging
12-20-2004, 03:29 AM
just got my winnie 3000 and neo2 0411 board

its a week 45 chip but i wont be able to do anything till tomorrow tho when the rest of my kit arrives :(

http://www.vapochill.eclipse.co.uk/hexus/a64.jpg

DevilsRejection
12-20-2004, 01:22 PM
question, how do you tell what board your neo2 is?

andyOCZ
12-20-2004, 01:33 PM
question, how do you tell what board your neo2 is?

If you mean how do you tell what chipset revision you have, you just pop off the chipset cooler and wipe off the goop. The date codes and revision are on the chip itself. If you are not sure what you are looking at just post a pic and we will let you know.

DevilsRejection
12-20-2004, 02:12 PM
how wasy is it to pop off the chipset cooler? any particular tools i need?

da_ging
12-20-2004, 02:46 PM
squeeze 2 pushpins and off it pops , so easy even a 5yr old could do it :)

boblemagnifique
12-22-2004, 05:21 AM
just got my winnie 3000 and neo2 0411 board

its a week 45 chip but i wont be able to do anything till tomorrow tho when the rest of my kit arrives :(

http://www.vapochill.eclipse.co.uk/hexus/a64.jpg

Good stepping :toast:

My new cpu Winnie :D

ADA3200DIK4BI
CBBHD 0447 TPEW
1152427L40054

da_ging
12-22-2004, 06:42 AM
Good stepping :toast:


well i will find out tonight as im about to build it :)

caligula
12-22-2004, 02:52 PM
I wish you loads of luck :)
Just tried today a 3000+ CBBHD 0445 RPMW (same stepping tho'), didn't even want to post at 2.7GHz wit 1.6V.
Now I'm running a CBBFD 0444 TPMW at 2.7GHz 1.6V aircooled prime95 stable. :banana: :banana: :banana4: :banana4:
A big "f#$k you" to epox for their extremely low BIOS voltages :( Will switch maybe to AV8.

boblemagnifique
12-22-2004, 07:12 PM
Good stepping :toast:

My new cpu Winnie :D

ADA3200DIK4BI
CBBHD 0447 TPEW
1152427L40054

Max Screen -> Aircooling Box AMD , 1.6v bios :slobber:

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/winnie@2956mhz.PNG

caligula
12-22-2004, 11:49 PM
Prime95 stable?

funkflix
12-23-2004, 12:03 AM
He said "Max. Screen"! U really think that is Primestable?! :rolleyes: ;)

ImmortalNoob
12-23-2004, 05:24 AM
Quick question.
If I use the 1.41b bios, or any, then the vcore is always .5 higher in the bios, than in reallife. Correct?

muzz
12-23-2004, 05:53 AM
You mean .1 ?

ImmortalNoob
12-23-2004, 05:56 AM
.1 then, was just checking.
thx

|Oc|REvO_HsArC
12-23-2004, 06:01 AM
I wish you loads of luck :)
Just tried today a 3000+ CBBHD 0445 RPMW (same stepping tho'), didn't even want to post at 2.7GHz wit 1.6V.
Now I'm running a CBBFD 0444 TPMW at 2.7GHz 1.6V aircooled prime95 stable. :banana: :banana: :banana4: :banana4:
A big "f#$k you" to epox for their extremely low BIOS voltages :( Will switch maybe to AV8.

hi there...

i have the same exact stepping, but with only one letter different lol

you have CBBFD 0444 TPMW
i have CBBHD 0444 TPMW

i hope that little letter doesn't change nothing, i like your results a lot! (im waiting for a motherboard to test mine...)


cya

dutchman.pt
12-23-2004, 09:49 AM
Max Screen -> Aircooling Box AMD , 1.6v bios :slobber:

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/winnie@2956mhz.PNG

Amazing clocks you got there.
We want to see it in your Prometeia Mach II@R404 for some 3ghz action. :)

caligula
12-23-2004, 09:56 AM
Say cheese, you're on the news :toast:
BTW, please notice that it runs prime stable at 1.5V vcore, as set in BIOS and read by both cpu-z and usdm.
Maybe AMD should reconsider about rebranding 4000+ CPUs as 3000+.
Later edit: CPU-z seems to go nuts at vcore reading when I start the USDM tool. But measured with the voltmeter, vcore is 1.515V.

|Oc|REvO_HsArC
12-23-2004, 01:31 PM
damn dude..... 2700mhz 1.5v Air cooled ?!

I am glad we have identical Cpus... :D

but now i see a personal problem, im not sure my Mushkin Pc3200 Level2 V2 (tccd) 2x512mb will allow 300htt (about 245mhz frequency) for me to reach 2700mhz :(


can you push it a little higher ?

Cloud125
12-23-2004, 03:37 PM
http://torny.altervista.org/3ghz.JPG
completly unstable... :p:
actually i did a little bit better with iced water(closed 1M@2980) can't show the pic now (that stupid mainboard left me :()
Btw cooling with a 226W Tec :)

caligula
12-23-2004, 11:09 PM
cloud: That voltage is sky high for a Weenie.
revo: I think I just ran into some other limitations problem. It's not stable at 2.8GHz even with 1.6V in it, so I assume it's a mobo or memory issue.

stelleg151
12-23-2004, 11:46 PM
these newer weeks seem to be doing very well, even if one cant do 2.7. I wish I had waited to buy my cpu, I have week 35 sitting here waiting for motherboard, because I thought prices might jump again after they dropped to 140.

caligula
12-24-2004, 01:06 AM
Just opened the window. If I had this body temperature, I'd be technically dead. Aircooled with CNPS7000.

Cloud125
12-24-2004, 08:34 AM
cloud: That voltage is sky high for a Weenie.
revo: I think I just ran into some other limitations problem. It's not stable at 2.8GHz even with 1.6V in it, so I assume it's a mobo or memory issue.
yep that's pretty right... i selected 1,65... but the voltages on the gigabyte change costantly :(

TurboDiv
12-25-2004, 02:24 PM
Merry Christmass to all !!!

I have my Winchester 3200+ at 2500 Mhz - 1.65 Volts ( 10x250 ). My memory is async at 2x208.3 Mhz 2.5-3-3-5 1T - Dual channel 2x512 Samsung DDR400. All of this on Neo2 Platinum.

da_ging
12-25-2004, 03:17 PM
currently running my week 45 3000 at 2550Mhz @ 1.4v and the memory at 250Mhz @ 2.7 v - @ 8.5 multi* 300htt, i can get it to boot into windows at 2.7Ghz but its not prime or super pi stable but have only tried upto 1.55 volts at that and it does run rather warm at that speed aswell so think i will leave out till i have better cooling

Hombre
12-26-2004, 02:52 AM
What is a good idle tempature for a 3200 Winnie @ 2400Mhz, 1.45v w/ stock cooler and AS5?
Mine is idle around 40c (or maybe a bit lower) and at load (hl2 and prime95 for ex.) up to 58-59c. Is that normal/low/high?

Thanks in advance.
Regards.

Mana
12-26-2004, 04:00 AM
What is a good idle tempature for a 3200 Winnie @ 2400Mhz, 1.45v w/ stock cooler and AS5?
Mine is idle around 40c (or maybe a bit lower) and at load (hl2 and prime95 for ex.) up to 58-59c. Is that normal/low/high?

Thanks in advance.
Regards.

load temps might be a bit high dude, but then it could be the stock cooler runnin at its max. u might consider upgrading your hs and fan.

S!1v3rB@cK_Dk
12-26-2004, 07:06 AM
Got my 3200+ CBBHD 0446SPDW a couple of days ago, and I have just tested it stable in 3Dmark01SE and PI 32M at 2.7GHz with 1.6v.
Its an okay OC, right? I am also using the stock cooler. But its bit of a shame that my board (A8V) only goes to 270htt stable.. Any ideas to get it longer?

boblemagnifique
12-26-2004, 07:35 AM
damn dude..... 2700mhz 1.5v Air cooled ?!

I am glad we have identical Cpus... :D

but now i see a personal problem, im not sure my Mushkin Pc3200 Level2 V2 (tccd) 2x512mb will allow 300htt (about 245mhz frequency) for me to reach 2700mhz :(


can you push it a little higher ?

hello, then this Cbbhd 0444 tpmw that give what in overclocking?

Mana
12-26-2004, 08:30 AM
Got my 3200+ CBBHD 0446SPDW a couple of days ago, and I have just tested it stable in 3Dmark01SE and PI 32M at 2.7GHz with 1.6v.
Its an okay OC, right? I am also using the stock cooler. But its bit of a shame that my board (A8V) only goes to 270htt stable.. Any ideas to get it longer?


thats a great overclock u got there and 1.6v will mean that your chip should last for a long time ;)

S!1v3rB@cK_Dk
12-26-2004, 09:54 AM
thats a great overclock u got there and 1.6v will mean that your chip should last for a long time ;)

Thats what I thought :D Just gotta find out how I can push the board longer. And I also got to get some new memory (2x512), I was thinking of getting some Ballistix, any comments on that?

IvanAndreevich
12-26-2004, 11:05 AM
http://img81.exs.cx/img81/3954/s9393000marking02s1lc.th.jpg (http://img81.exs.cx/my.php?loc=img81&image=s9393000marking02s1lc.jpg)

Does 302x9 = 2718 100% stable in 3d & prime after taking the IHS off. Taking the IHS off gave 8 degree drop in temps.

caligula
12-26-2004, 01:10 PM
Thats what I thought :D Just gotta find out how I can push the board longer. And I also got to get some new memory (2x512), I was thinking of getting some Ballistix, any comments on that?

I have been able to use (on my board, though) micron memories up to 275MHz 5-3-3-3 (2x256 sticks) with 2.8-3V. Now I'm using them at FSB 300 5:4 (approx 245MHz for my 9x divider) 5-2-2-2.5. Who needs BH5 anyway?
One thing for sure: tested today (and stable though) two Corsair 512M sticks with TCCD/BrainPower pcb and they worked upto 285MHz 5-3-3-2.5 ;) There are rumors that some Corsair C2PT revisions have also tccd/bp pcb - cheaper though. My advice: micron (ballistix) support lower timings but in moderate frequencies (230-270MHz), you may want to choose them in async mode, but for sync mode (1:1) use tccd (gskill for example should be ok). The price difference is not too high.

sr4470
12-26-2004, 01:27 PM
Memory 1:1 DDR500 2.5-3-3-7, 6800GT @stock, details in sig

Kronix
12-26-2004, 03:21 PM
Could boot at 2800, but crashed. Not Prime stable at 2650. Ended with this. LOVE THE WINCHESTERS!
http://img133.exs.cx/img133/7417/oc4ml.gif

NiCKE^
12-26-2004, 03:31 PM
What timnings do you use?

Kronix
12-26-2004, 03:34 PM
2.5-3-3-5-11-16

boblemagnifique
12-26-2004, 03:52 PM
Amazing clocks you got there.
We want to see it in your Prometeia Mach II@R404 for some 3ghz action. :)

yes but i is not to recover my prommy

Some benchs while always waiting with the box Amd :

http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/sandra2776mhz.PNG
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/sandra2765mhz.PNG
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/superpi29s.PNG
http://www.membres.lycos.fr/boblemagnifique/Overclocking/A64/cbbhd0447tpew/cpumark340.PNG

fatty
12-27-2004, 03:02 AM
Hehehehe some newcastle action lol
http://www.fattass.dsl.pipex.com/stuff/3jig.JPG

fatty
12-27-2004, 03:03 AM
Forgot to mention that is under my R507 prom the Gt is good but doesnt take the heat away as well as the 507

z00mX
12-27-2004, 08:05 PM
i can only reach 2.7ghz stable with this setting. is it the ram that is stopping me? i was thinking about rma the ram and go for the gskill pc4400 hoping to go higher than this. any suggestions from the experts? btw running the ram with ddr booster at 3.15 volts.

System Is:

CPU: AMD Athlon 64 3200+ @ 2700 ( Water Cooled )
Mobo: MSI K8N Neo2 Platinum BIOS 1.51 beta
RAM: 1024 MB OCZ PC3700 EL Gold Rev.3 (2.5-3-3-8-1T) @ 3.15V
Video: ATI 9800 Radeon PRO @ 450/730 (Water Cooled)
HDD1: 36.7 GB WD Raptor, 10000 RPM SATA
HDD2: 300 GB Maxtor DiamondMax 10, 7200 RPM SATA
PSU: Aspire 500W

BIOS Settings:

Memory Menu --> 1:1 Auto, 1T, 2.5, 3, 8, 3


Cell Menu -->
High Performance = Manual
Aggressive Timing = Disabled
NV/ATI Speed Up = Disabled
DRAM Signal Strength = Normal
Spread Spectrum = Disabled
Cool N Quiet = Disabled
HTT = 3x
Multiplier = 10x
FSB = 270
AGP = 66
VCore = 1.6V
VDIMM = 2.85V
AGP Voltage = 1.60V

http://www.xtremesystems.org/forums/attachment.php?attachmentid=21554&stc=1

0DIGy
12-28-2004, 11:07 AM
|Oc|REvO_HsArC i've the same 3200+ can you give me results about your overclock?

Cyrus The Virus
12-28-2004, 05:29 PM
My winnie 3200+ doing 2826mhz @ 1.584V (boxed heatsink with 80mm 4500RPM Fan) PiFast stable Link (http://users.pandora.be/CyrusTheVirus/PiFast%2044.31%20@2826%20Mhz.JPG)

I hope ASUS makes a bios that can give me 1.65V and when I have my XP-120 I will try to brake the MHZ record on air :rolleyes:

Wingless
12-28-2004, 07:26 PM
My winnie 3200+ doing 2826mhz @ 1.584V (boxed heatsink with 80mm 4500RPM Fan) PiFast stable Link (http://users.pandora.be/CyrusTheVirus/PiFast%2044.31%20@2826%20Mhz.JPG)

I hope ASUS makes a bios that can give me 1.65V and when I have my XP-120 I will try to brake the MHZ record on air :rolleyes:

pretty good timings 4 such a good FSB 270+mhz? R u running a ratio?
Crazy Video Card OC as well....

Pimp!
12-28-2004, 08:45 PM
hes using the 3:2 divider which you could clearly see in clockgen in his pic

sandwichamwin
12-28-2004, 10:29 PM
Just did some playing with my new Neo2 and week 47 3200+ winnie. Can't wait for some new cooling and some decent ram that doesnt max out at 225fsb 3-3-3-8 :(

Wingless
12-28-2004, 11:57 PM
hes using the 3:2 divider which you could clearly see in clockgen in his pic

so before crying BS, follow up before posting

***

Cyrus The Virus
12-29-2004, 02:20 AM
Still bs..
Oi R u really pimp?whatcha do? pimp of computer nerds?

It isn't BS

My stepping:
ADA3200DIK4BI
CBBHD 0447UPCW
1158317L0072

I will make a new screenshot and let it verify:
http://users.pandora.be/CyrusTheVirus/Super%20Pi%201M%2033Sec.JPG

Checked (http://www.xtremesystems.org/forums/showthread.php?p=649405&posted=1#post649405)

Jupiler
12-29-2004, 02:37 AM
Still bs..
Oi R u really pimp?whatcha do? pimp of computer nerds?

Looks like my last PM to you didn't help.
Anymore of this kind of bashing posts will results in a 3 day vacation.
Consider yourself warned.

Check your PM.

bacon
12-29-2004, 02:43 AM
Yo iv looked through a few pages and am interested in any week 46 users experience, have a 46 coming 2moro (3200)

dont really have the time to sift through 10 pages of recent posts :)

glock19owner
12-29-2004, 02:44 AM
K8N NEO 2
3200 Winnie
2x512 G. Skill PC4400

01 Link (http://service.futuremark.com/compare?2k1=8333413)

http://home.insightbb.com/~myglock19/Bench.JPG

esdee
12-29-2004, 05:30 AM
K8N NEO 2
3200 Winnie
2x512 G. Skill PC4400

01 Link (http://service.futuremark.com/compare?2k1=8333413)



your score should be a 30s spi with just a little software-mem tweaking

nice oc!

dnottis
12-29-2004, 07:53 AM
It isn't BS

My stepping:
ADA3200DIK4BI
CBBHD 0447UPCW
1158317L0072

I will make a new screenshot and let it verify:
http://users.pandora.be/CyrusTheVirus/Super%20Pi%201M%2033Sec.JPG

Checked (http://www.xtremesystems.org/forums/showthread.php?p=649405&posted=1#post649405)

Your SuperPI 1M is 33 because the memory isn't 1:1. I'm at 2.6Ghz with memory @ 1:1 and I get SuperPI 1M or 32. I dont think he's bs - performance seems about right using those settings. Wish I could get 2.8 Ghz tho :)

Cyrus The Virus
12-29-2004, 08:59 AM
Your SuperPI 1M is 33 because the memory isn't 1:1. I'm at 2.6Ghz with memory @ 1:1 and I get SuperPI 1M or 32. I dont think he's bs - performance seems about right using those settings. Wish I could get 2.8 Ghz tho :)

I can't overclock cpu when mem is 1:1, my memory sucks in Speeds (except the timings) friday I am going to test some other memory (don't what type it is) And if that doesn't helps I'm buying G.SKill 4400

glock19owner
12-29-2004, 10:43 AM
your score should be a 30s spi with just a little software-mem tweaking

nice oc!

thank you...I havent even started tweaking anything really...still finding the sweet spot on the CPU...the G. SKill memory is what really helped...gotta love ram that does 8-4-4-2.5 @300FSB at 1:1 though...and my goal is to hopefully break 29...I know this is a long shot...but I think this setup has a very good chance when I really start tweaking :)

Cyrus The Virus
12-29-2004, 12:37 PM
New record for me 3200+ @2951Mhz @1.584V (Screenshot Stable ;) )

Air cooled (box sink + 4500 RPM Fan)

Link Screenshot (http://users.pandora.be/CyrusTheVirus/AMD%20Athlon64%203200+%20@2951MHZ%20@1.584V%20@27% b0.JPG)

Jupiler
12-29-2004, 12:47 PM
That is indeed very impressive.
What speed can you that baby stable?

Cyrus The Virus
12-29-2004, 12:50 PM
max stable was 2826 Mhz, the only problem is that I'm missing that Vcore :mad:

Jupiler
12-29-2004, 01:02 PM
Maybe an future bios update will help.
I'd be glad with 2826 Mhz though. :D

Cyrus The Virus
12-29-2004, 01:12 PM
Maybe an future bios update will help.
I'd be glad with 2826 Mhz though. :D

No I want more :p: But is it possible with new bios ?
Someone thold me that the Winchesters have 0.1V undervolt so If I put de Vcore on 1.65V (ASUS A8N-SLI) then is the real Vcore 1.55V. Is this true (I hope not) ?

viccyran
12-29-2004, 09:43 PM
Hehe, newer 0441.. spmw I think..

a lot nicer with less voltage :P

http://tsukagi.net/benches/2700.jpg

stelleg151
12-30-2004, 04:11 AM
Finally got my 3000+ into a board. Getting 2.5ghz at 1.65vcore. Sad that its so weak, getting 34second 1m.

sr4470
12-30-2004, 06:20 AM
Ive gone further with my 3000, 12v rail looks dodgy at 11.85 and reboots when connecting LAN is stopping me from going higher for now