Got my booster today

[Crow]

Got my booster today that I won from the competition :banana:

Here are my specs,

a64 3200+ NC
MSI K8T neo fsr (sucky..i no i no) not nforce3
OCZ Performance series ram rev 2
ati 9800pro

From bios I can get into windows 11x230 1:1 no problem with 2.85vdimm 1.5vcore (max for my mobo with clockgen is 1.550)

Now it wont let me into windows at 11x228 with vdimm at 3.3 with the booster.

Im confused :confused:

[pythagoras]

Did you try voltages inbetween 2.85 and 3.3? If not try going up in o.05 intervals first and see where the drop off point is. Also you may need extra cooling on ram and booster at 3.3volts and above, other wise the benefits of the extra volts are diminshed by the heat.

Regards

John.

[Crow]

from what the instructions say, you are suppose to set it all the way counter clockwised, and it will read your bios. My bios is at 2.85...and it reads 2.4, its weird.

[SteveOCZ]

Sounds like the adjustment pot has been bumped. Try adjusting it as instructed in the manual to match the bios voltage. If you can double check with a DMM to make sure its correct.

Let me know if you need any help