Temp comparison thread.

[JBELL]

ok guys post 'em if you know 'em!!


CASE:
Swifty QPower (from www.xtwerkz.com)

Processor:
2.0a GHZ northwood @ 2.3 GHz (From SSS; Higher OC to come later!)

Temps:
Case temp @ 28c/82f
C P U temp @ 34c/93f

Temp Program:
Temps taken from ASUS PC Probe (P4T533 Motherboard)

Measurement Time:
Rig at 100% load for 2 days

voltages:
12v @ 12.416
5v @ 5.16
3.3v @ 3.376
vcore @ 1.648

PSU:
Enermax EG651P-VE FMA (STOCK!! no POT modifications)

[FRAGN'STIEN]

With my own home built waterblock:

Ambient, indoor/outdoor therm: 23°c
System, MBM reading winbond : 27°c
Water, inline term: 27°c
CPU idle reading XP diode: 32°c
CPU full load reading XP diode running toast: 37°c

XP 1600 @ 1743 (166x10.5 1.80v)

[Eyecannon]

AXP 1600+ @ 1.833Ghz @2.25v
Ambient: 25°C
Idle: 19-22°C
Full Load: 33-36°C
Temp read with flat thermistor right next to core
Bong cooled

http://eyecannon.com/1(2).jpg

http://eyecannon.com/bong.html

[Marci]

Case: Chieftec AH-001SLD Aluminium Tower
CPU: AMD Athlon XP2400+ TBred core @ 2.5Ghz
Case Temp: 33deg
CPU Temp: 39deg
Temp Program: MBM5
Meas. Time: 100% Load, 3 days
Voltages: 1.58 (AGP) 5.03 (5v) 12.22 (12v) 1.87 (vcore)
PSU: Enermax 431w 465Whisper

Watercooled with Swiftech MCW462UH, DTek Heater Core, Eheim 1048 Pump.

[mdzcpa]

CASE:
Swiftech QPower with Peltier Upgrade (http://www.liquidninjas.com/reviews.php?op=showcontent&id=20)
MCW-462UT (226w pelt)
MCW-50T (80w pelt)

Processor:
XP 2700 at 2630mhz (202 x 13...24/7 setting)

Goodies
XP 2700
2 x 256 Corsair XMS3500
R9700 Pro
Rocket RAID Card w/ 2 x 40g ATA 133 Maxtors
Turtle Beach Santa Cruz
DVD/CD
4 Fan Rheobus
Linksys NIC

Motherboard
Abit KD7-E

Temps:
Case temp loaded with Folding @ 39
CPU temp loaded with Folding @ 19

Temp Program:
MBM 5.2.1.0

Measurement Time:
Rig at 100% load while Folding for 4 days

voltages:
12v @ 12.04
5v @ 5..05
3.3v @ 3.33
vcore @ 1.90
DDRv @ 2.85

PSU:
Antec True Power 550w

[Hardass]

CASE:
Swiftech Q, Pwr with Pelts
CPU, 226W
GPU, 80W

PROCESSOR:

1600@1938MHz 184.6 X 10.5

MOBO:

EPOX 8K3A+

TEMPS:

Case Temp W/Full Load. F@H 27c
CPU Temp W/Full Load F@H 24c

MEASUREMENT TIME:

Running F@H for over a month!

VOLTAGES:

12v @ 12.34
5v @ 4.84
3.3v @ 1.54
Vcore @ 1.95

PSU:

TTGI 520W.

[X Men SS]

Case :
Enlight ****
GPU, 80W

CPU:

1700+@1907MHz 173.37 X 11

Mobo :

Abit KX7-333R (silver caps)

Temps:
Case temp @ 30C
C P U temp @ 38C

Temp Program :
MBM 5.2.0.0

Measurement Time :
Rig at 100% load for 1 day

Voltages:
12v @ 11.92V
5v @ 4.95
3.3v @ 3.47
vcore @ 1.71

PSU:
Enermax EG465AX-VE(G) FMA

[JBELL]

Originally posted by Hardass




VOLTAGES:

12v @ 12.34
5v @ 4.84
3.3v @ 1.54
Vcore @ 1.95

PSU:

TTGI 520W. [/B]


DUDE your voltages are whack!!!

[KnightElite]

Originally posted by JBELL
DUDE your voltages are whack!!!

Those actually aren't too bad. MBM is just reading the AGP voltage instead of the real 3.3V line :D.

[Hardass]

Originally posted by JBELL
DUDE your voltages are whack!!!
Thats the TTGI I bought that looks different then all the other TTGI I have. It,s the only one with the pot turned up it still has a 5v line under 5.00. Put it is doing the job. :)

[megatron]

Case :
Globalwin 802 with 6 blowholes for 80mm fans (running case bear atm) aka Coolercase Tornado from www.overclockers.co.uk (Noisy as hell @ 12v fans)

GPU stock ati heatsink fan

CPU:

xp2400+ 166Mhz * 12

Mobo :

Epox 8RDA+ with unlocking official bios

Temps: (The result is based very heavily on what the weather is like)
Case temp @ 26C
C P U temp @ 37C

Temp Program :
CPUcool no longer free so Epox USDM

Measurement Time :
Surfing (at idle)

Voltages:
12v @ 12.34
5v @ 5.05
3.3v @ 2.62
vcore @ 1.70 reported bios says 1.5 and its at default

PSU:
Enermax EG651 (as sig)

[hedge]

Case

CasEdge
Modded to fit:
2 120mm fans
1 92mm fan
Ice Pro Radiator

Cpu
Athlon XP 2100+@2013 @1.65 V
cooled by Maze2c from danger den

MBM5 temp readings

Idle Temp:
24 C
Load Temp:
27 C

PSU
Antec 350W

Hedge

[Nebulous]

Case: Chieftec Fully modded:
2-92mm ThermalTake fans-39cfm ea. In front
2-80MM ThermalTake smartfan1 In rear
1-80MM vantec stealth side intake

Cpu: XP2100 Tbred B 304 @ 2525Mhz(12.5x202) @ 1.9v
w/ MXL Miro WB

MBM5:
CPU-25c Idle
Full load: 28c Folding 27/7


Case: 26c

Psu: TTGI 520w
Vcore: 1.9v
+3.3v:3.35v
+5v :5.11v
+12v :12.80v
Vdimm:3.09v


Custom built water cooler:
http://overclockers.com/tips1067/
:D

-N-

[Spec3]

Cooling

Swiftech MCW5000-A
Home made water bong
400GPH Powerhead 802
all on 1/2" ID tubing

CASE:
Antec SX1040B

Processor:
AMD XP1700+ @2324Mhz 10.5x221.3Mhz

Temps:
Case temp @ 21C
C P U temp @ 31C

Temp Program:
USDM for Abit NF7-S rev 1.2

Measurement Time:
Rig at 100% load for a day

voltages:
12v @ 12.05
5v @ 5.19
3.3v @ 3.36
vcore @ 1.68

PSU:
Antec 400W

[nick9802]

CASE:
Koolance PC2-601BW

Processor:
3.06 GHZ hyperthreading Enabled! @ 3.52 GHz (23 x 153)

Temps:
Case temp @ 24c, 21 ambient
C P U temp @ 29c

Temp Program:
according to bios on soyo p4x400 dragon ultra board

Measurement Time:
Quake3 arena all details, 1600x1200, 3 hours, close, and restart

voltages:
12v @ unk at the moment.. at work now
5v @ unk at the moment.. at work now
3.3v @ unk at the moment.. at work now
vcore @ unk at the moment.. at work now

PSU:
unk at the moment.. at work now

[CSOFT]

CASE:
LianLi PC70

PROCESSOR:

2100+@2.42MHz 220 X 11

MOBO:

Asus A7N8X Rev2 Chipset@1.85V, DDR@3.01v, CPU@2.05V

TEMPS:

Case Temp W/Full Load. 3DMark03 loop 24c
CPU Temp W/Full Load 3DMark03 loop 38c

MEASUREMENT TIME:

2 Hours

VOLTAGES: (Asus Probe / Multimeter)

12v @ 12.48 / 12.75
5v @ 4.97 / 5.24
3.3v @ 3.3 / 3.3
Vcore @ 2.048 / NA

PSU:

EG651 Modded

[Bundles]

CASE:
Full tower

PROCESSOR:
XP1700+ @ 2525.5mhz

MOBO:
Asus a7v8x

TEMPS:
Case Temp W/Full Load. 25oC
CPU Temp W/Full Load. 37oC

MEASUREMENT TIME:
Running seti for over a 3 months

VOLTAGES:
12v @ 12.44
5v @ 4.88
3.3v @ 3.29
Vcore @ 1.825
Vdimm @ 2.85

PSU:
Q-tec 550w single ADDA fan

COOLING:
vauxhall cavalier heatercore, hozelock 850lph pump, maze 3 waterblock, home made res and radbox, Codeflex tubing

All temps taken using calibrated Thermal probes and an LCD display.

[gobbo]

CASE:
Lian Li PC60

Processor:
1700+ @ 2400mhz @ 1.8v

Temps (Load):
Case temp @ 31c
CPU temp @ 39.5c

Temp Program:
Onboard mobo (Abit NF7-S Beta Bios) Winbond Hardware doctor

Measurement Time:
Rig at 100% for 14 hours

voltages:
12v @ 11.62
5v @ 4.97
3.3v @ 3.28
vcore @ 1.808

PSU:
Q-Tec Gold 450w

Cooling:
OCPC Atlantis Rev 3
ThermoChill 120mm rad
Papst 120mm
Eheim 1048

Currently jsut cooling CPU with that setup.

[saaya]

case:
no name (VERY good case though!)

cpu:
1700+ (tbred-b) @11x200@1.80v

temps (load):
45°C cpu

temp program:
winbond

meassurement time:
gaming for 16hours ;) (lan)

voltages:
12v=11.73
5v=5.12
3.3=3.19
vcore=1.83

PSU:
fsp fortron 350W (relabeled 450W :D)

cooling:
coolermaster cp5-7jd1b silent cooler
3 case fans@7v=silent (zalman heatpipe sandwiched with 2 casefans and one fans sucking in cool air in the front)

[cowpuppy]

I bought a chiller of E Bay for a $100.00 and 80.00 shipping from Cal. Without having to invest a dime it preforms absolutly great.
Here is a screan shot after making a run in 01. The bottom temp is cpu temp. This is after 4 or 5 hrs of benchmarking. it was a cool morning about 40ish and low humidity.

[megatron]

Originally posted by cowpuppy
I bought a chiller of E Bay
Obviously its pretty big, but what else can you tell about this chiller? Any links or advice on what is suitable, and does it have a thermostat to control temperature? Any condensation issues? Having run a pelt, I don't like condensation, and would rather avoid having to deal with it. Thx.

[Teus]

CASE:
Koolance PC2-C modded:
-no watercooling unit
-rear fan blowing air into the case
-2 top 120mm enermax fans at 5v
-3slow intake's on the bottom
-slow PSU fan

Processor:
1700+ JIUHB at 2050 mhz

Temps:
Case temp @ 28
CPU temp @ 42

Temp Program:
MBM5

voltages:
12v @ 12.16
5v @ 4.97
vcore @ 1.74

PSU:
Aopen 300W

update soon: 120mm delta's at low voltage, enermax PSU with dual fans and a fanduct

[cowpuppy]

Just go to E bay and do a search for chillers or look in laboritory equipment Neslabs is a good brand mine is a endocal and it has temp controllers (-30 to 100C) along with a heater and 3/8 lines. its size is 18"x16"x16" and has probably a 2 gal bath it runs on 110v I use a consentration heat remover and Dex-Cool with water mix and it has its own pump that I'm sure pumps way more than 120gph

condensation is deffenatly a problem here in MI with humidity reaching 95% in the summer. all my lines are wraped with pipe insolation my blocks are all protected with neopream and my board was preped as if i was gong to run pelts. and I will be soon. I use all plastic fasteners as they sweat less along with plastic water fittings and I use the thick tygon tubing all to fight condensation and then there is the Kleenex tissue shoved in cracks here in there to catch a stray drip :cool:

[NickK]

CASE:
Cheiftech Dragon

Processor:
Barton 2500+ @ 200x11 1.775Vcore.
(Did 215x11 @ 2.025Vcore, 2.9Vdimm with SLK900U and lots of fans)

Temps:
Case temp @ 30-32c
CPU temp @ 45c Prime95, 43c 24/7 SETI.

Temp Program:
MBM5 from the Epox 8rda+'s own temp sensor.

Measurement Time:
Prime95 temp - running Prime95 torture for over 2000 test iterations.
SETI temp - running SETI 24/7.

Cooling:
Waterchill CPU+NB blocks, external rad and pump.
2x Papst 80mm 40cfm (one front in, one rear out) connected to Antec's fan speed line.

voltages:
12v @ MBM5 11.73, multimeter says 12.00
5v @ MBM5 4.86, multimeter says 5.01
3.3v @ MBM5 ~3.3
Vcore @ MBM5 ~1.775
Vdd @ 1.82 (Vdd mod)
Vdimm @ 2.77

PSU:
Antec Truepower 550W.

[CSOFT]

CASE:
LianLi PC70

PROCESSOR:

2100+@2.43MHz 221 X 11

MOBO:

Abit NF7-s Rev2 Chipset@1.85V, DDR@2.9v, CPU@2.03V

TEMPS:

Case Temp W/Full Load. 3DMark03 loop 31c
CPU Temp W/Full Load 3DMark03 loop 38c
Water Temps (in the Resavoir) about 30-34
Room temp about 27-31

MEASUREMENT TIME:

2 Hours - GTA3

VOLTAGES: (Winbond Software / Multimeter)

12v @ 12.05 / 12.15
5v @ 5.05 / 5.10
3.3v @ 3.28-38 / NA - havn't mesured
Vcore @ 2.00-2.02 / NA

PSU:

EG651 Modded

[copyman]

watercooled machine (no peltier chiller or vapo)

Watercooler F2 Extreme

CASE: no case


Processor: xp1700+ @ 2744mhz

Temps:
Case temp @ 20c
C P U temp @ 29c

Temp Program:
Prime 95
Measurement Time:
14xx interations

voltages:
12v @ 11.80
5v @ 5.00
3.3v @ 3.31
vcore @ 2.05v

PSU: TT 420w pfc



OBS : nf7-s rev2 Bios 1.4 (-10) Now the abit lies equal the epox :D


http://www.watercooler.com.br/xp/1.jpg

http://www.watercooler.com.br/xp/2i.jpg

[Ocbench]

Hello Guys...

A month ago or so, I purchased a 300liter Box Freezer, and started ceeling my cpu waterblock and socket with neopren and Dielectric grease.

I have a Xp2400+ overclocked to 2598mhz.
IDLE temp was : 12º celcius
FULL LOAD temp was : 18º celcius.

All in all it only cost me aprrox 75$ US including the freezer + all the neoprene needed.

So a rather fair price concedering the overclock I got with it.
Now i just have to seal my Swiffy MCW50-T waterblock and maybe put in a more powerful Pelt.

So I can go beyond the 20k I´m hoping to.

[chris4521]

CPU: DLT3C xp 1700+
M/B: Abit nf7-s rev2.0
Ram: geil ultra platinum pc3500

223 X 11.5 = 2561 MHZ. 1.90V

cooling system:
-Maze3
-Eheim 1046 (low flowrate..about 150 GPH..upgrading soon.)
-Chevette heatercore with 1x120mm + 1x92mm intake. 2x80mm on the other side. in suck-blow configuration.
-homebuilt resevoir from PVC piping.

CPU TEMPS:
idle: 35C
load: 40C (after a couple hours of prime95)

m/b temps:
idle: 28C
load: 30C.

my ambient is 20C.

[semester]

CASE:
Codegen ATX-9001 mini server case

Processor:
XP 2400 at 2300mhz 200 x 11,5 (24/7 setting)

Motherboard
Abit NF7-S v1.2

Cooling:
Maze3
Bix
Noname pump 580 l/h
120mm Papst @ 7v

Temps:
Case temp loaded @ 27
CPU temp loaded @ 39

Temp Program:
MBM5

Voltages:
12v @ 11.98
5v @ 4.97
3.3v @ 3.23
vcore @ 1.81
DDRv @ 2.93

PSU:
Enermax 431w with 1st 120mm Papst @ 7v

[Spec3]

CASE:
Antec SX1040B II

Processor:
2.4C mayla @3540Mhz

Temps:
Case temp @ 31C
C P U temp @ -8.5C idle/5.5C load

Temp Program:
hardware doctor with IC7

Measurement Time:
Idle for about 2 mins and load for about 10

voltages:
12v @ 11.8
5v @ 5.03
3.3v @ 3.30
vcore @ 1.55


PSU:
Enermax EG651P-VE FMA [/B]

Cooling Swiftech MCW 5000PT w/226 pelt @22A
Home made water chiller (just made it so temps are not known yet)

Idle

Stevehttp://members.rogers.com/sscomp/chilledidle.jpg

Load

http://members.rogers.com/sscomp/chilledload.jpg

[Spec3]

http://members.rogers.com/sscomp/asuspelt.jpg

Some more tweaks

[\/icious]

nice. so thats with pelts and waterchilling?

[SupaMan]

CASE:
Lian-Li PC70

Processor:
2400+ AIUHB0249 @2420Mhz
220MHz x 11

RAM
corsair XMS3500C2 platinum 2x256

motherboard
Abit NF7-S v2.0

Temps:
Case temp @ 25C
C P U temp @ 35C idle/45C load

Temp Program:
hardware doctor

voltages:
12v @ 12.05
5v @ 5.08
3.3v @ 3.58
vcore @ 1.90

PSU:
Enermax 431W autofan

Cooling Swiftech MCW 5000-A (Nanotherm PCM+)
Dtek Pro core, shrouded 80cfm evercool exhaust fan directly out of case.:explode:

always wondered if my temps are a bit high, what do you think?

coming soon: Silverprop Fusion GPU block (SL-T or HL). Possibly a LRWW

[naughty_guy]

CASE:
C3 Full Tower Clear Blue case

Processor:
24/7 setting: P4 2.4C @ 3.12Ghz

Temps:
Case temp @ 27c +-1
CPU idle @ 31c
CPU max temp @ 53c Prime95 after a few hours of Prime95

Temp Program:
Hardware Doctor from Abit

Measurement Time:
Prime95 temp - running Prime95 torture under MAX heat mode for a few hours

Cooling:
DD Maze 4, BIX with 80mm fan running @ 1/2 speed, Hydro L20, 1/2" tubing

voltages:
All voltages very good above default since I turn all knobs on my Antec TruControl to MAX
Vcore @ 1.55-1.575v
Vdimm @ 2.78-2.8v

PSU:
Antec TruControl 550W.

[tritium]

Motherboard: Abit NF7-S version 2.0

Case: standard no name ATX / 350W Antec PS

Processer: AMD 2500+ @ 2340Mhz (221X10.5)

RAM: Twinmos BH-5 PC3200

Cooling: Flowmaster xt Watercooler

Temps: case: 25c
CPU: 26c (idle) 33c (load)

Fans: (3) 80mm case fans

Temp sensor: Under die Thermistor (pos thing that it is)

Temp proggie: winbond hardware doctor

[Vitalizer]

CASE:
Lian-li pc65

Processor:
Amd xp2500+ ( AQUCA 0308 SPGW ) @ 2.4ghz

Temps:
Case temp @ 26c
C P U temp @ 46c(idle) 51c(fulload)

Temp Program:
mbm5

Measurement Time:
idle for 5h:)
fulload prime 95 for 24h

voltages:
vcore @ 2v
vdimm @ 1.7v
vmem @ 2.9v
PSU:
Hiper 420w

[sandman]

CASE:
cheiftec dragon, modded.

Processor:
1700+ @ 2.5ghz @ 1.9Vcore

Temps:
Case temp: 23C
CPU temp: 35C


Temp Program:
Bios

Measurement Time:
Maxe Payne 2 for 3 hours and folding

voltages:
12V at 11.91
Vcore:1.92

Cooling: maze3>via aqua 1300>D-tek Pro core>maze 3

PSU:
Allied 450 (stock)

[freecableguy]

CASE:
Lian-Li PC70 (highly modified)

CPU:
P4 3.4EE ES @ 4000Mhz (250FSB)

RAM:
1GB (2*512) Corsair XMS3500C2 v1.1 (BH-5)

Motherboard:
Abit IC7-MAX3

Temps:
Case temp @ 32C
CPU temp @ -2C idle/26C full load
Water temp @ ???

Temp Program:
BIOS via MBM5

Voltages:
12v @ 12.28
5v @ 5.08
3.3v @ 3.50
vcore @ 1.50

PSU:
PCP&C TurboCool 510 ATX-PFC

Cooling:
Blueline Velocity T1 pump
ThermoChill HE120.2 w/4*Delta 120x38mm fans (400CFM)
Swiftech MCW5002-PT WB with 226W TEC
Meanwell SP-320-12 (moving up to SP-480-15)
All 1/2" ID tygon tubing


-kris

[John Cena]

Case: ThermalTake Xasier 1400D Tower with side panels open.

CPU: Intel Pentium 4 3.0ghz 800fsb Proccessor

Ram: Geil PC3200 512MB(256MB X 2) Dual Channel

Motherboard: Asus P4P800 Deluxe

Temps
Motherboard
36 Celcius Idle
42 Celcius Load

Proccessor
Around 24 Celcius Idle
Around 32 Celcius Load

Program MBM5

Cooling:
Swiftech MCW-5002P
Eheim 1048 Pump
Resvoir
JR-120 Rad with Chrome 120mm fan
ClearFlex 1/2" Tubing
2 Silent Exhuast fans, 2 Hardrive fans, 2 Intake Fans
All fans on Vantec Controller

[afireinside]

1800+ at 2.53ghz (230*10.5) 1.82V
45C load with high ambiant room temps. Diode reading from MBM5.

Cooling:
Scratched up maze4
Dannar Mag3
Push/Pul setup on Dtek procore. One shroud. 80 CFM Evercool Aluframe fans.
AS5 thermal paste not 100% burnt in

Ambiant temp is 70-85F.

[chris4521]

CASE:
Scorpio Raidmax 626w

Processor:
AMD Tbred 1700 (DLT3C 0310)+

Temps:
Ambient Temp: 20C
Case temp @ 28C (Full Load)
C P U temp @ 39C (Full Load)

Temp Program:
HWDoctor

Measurement Time:
Rig at 100% load for 24 Hours

voltages:
Vcore - 1.85v
Vdimm - 3.2
VDD - 1.8

Watercooling System:
Kuri Tec Tubing, Swiftech Hydrx
Swiftech MCW5000
Swiftech MCP600
Swiftech MCR-80 80mm Radiator (2x 38CFM fans)
Maxxpert 120mm Radiator (1x 70CFM 120mm, 4x 30CFM 80mm) (In series with Swiftech)

[beathoven]

Cooling
Zern Delta X
Heattrap GPU rev 1.01
AC twinplex NB wak
hydor l20
htf 2x dual

CASE:
selfmade wooden cube

Processor:
Pentium 4 M0 2,40 @ 3,60 @ 1,6v

Temps:
Case temp @ 24C
C P U temp @ 31C/35C idle/load

[iboomalot]

setup

1048 pump --> Zalman CPU block ---> Zblock---> Zalman GPU block---> Reserator then back to pump.

system temps to give you an idea of performance past and present

Past sytem XP-2800+ @ 2267 mhz // 48-57c aero7+

idle 36c load 44c

present system a64-3500+

2620 mhz = 49c load (262*10, @1.675v)
2540 mhz = 47c load (254*10, @1.65v)
2540 mhz = 45c load (254*10, @1.6v)
2400 mhz = 44c load (240*10, @1.6v)
2400 mhz = 42c load (218*11, @1.5v)
2200 mhz = 41c load (bone stock 200*11, 1.5v)

also once load is taken off (49c) temps drop 9c in less than 30secs then slowly drops to 38c after 3 mins then 37c after 6 mins and 36c after 20mins holds there.

[caLume]

p4, 2,4 @ 3,6 -> 1,6v
asus prob idle/full: 25/30 °C

so, real temps ~ 35/40. °C

[=[PULSAR]=]

What kind of temps are you guys getting on the water during load, after the radiator?

[computer_geek]

hi all got my watercooling in

i am using the Silverprop Evolution SE block heater core out of a commodore

and a waterwerks accent pump 1000l/per hour 1.4m head and it is submersible only so i have it in the bottom of my res

today @ 8:30am 16oC room temp
cpu temp idle =24oC
system temp =19oC
water temp = 20oC

yesterday 24oC room temp from 2:30pm to 4:15pm temps below .
cpu 38oC
sys 25oC
water 36oC

[SledgeMakeGood]

CASE:
hand-me-down (no panels, but no fans either), watercooled (check sig)

Processor:
P4 2.6C@3.25

Temps:
CPU@ 23C idle/27C load
NB@ 23C idle/23C load

Temp Program:
Onboard thermistors

Measurement Time:
Rig at 100% load for about 2 minutes (it doesn't get any hotter, I've checked)

voltages:
12v @ 12-ish
5v @ 5-ish
3.3v @ 3.3-ish
vcore @ 1.6-ish

PSU:
Antec TruePower 430

[Paxi]

i am still testing my 3000+ but @ moment
CASE:
Chieftec Big Tower

Processor:
Amd64 3000+ Winchester @ 2,2

Temps:
Case temp @ 27c
C P U temp @ 37c(idle) 47c(fulload)

Temp Program:
mbm5

Measurement Time:
fulload prime 95 for 24h


vcore @ 1,5v


PSU:
Enermax 460 Watt

[idleuser]

BlastNA, Is there any idea why the athlon 3000+ is running higher temp with the watercooling setup than stock air? I'm asking because i'm using the msi corecenter and it's reading 33°C on idle and 42°C on load for me. I will do more testing tomorrow. I still have no idea why my temps are higher with my watercooling rather than my aircooled setup.

CASE:
Lian Li - PC75B

Processor:
Amd64 3000+ Winchester @ 2.6

Temps:
Case temp @ 27c
C P U temp @ 33c(idle) 42c(fulload)

Temp Program:
Corecenter

Measurement Time:
not prime stable but 3d application stable for 2 hours with CS:S
(not prime stable in any configuration for me)
vcore @ 1,5v

PSU:
Ultra X-connect 500 watt

[jopers1986]

you people are getting some awsome 1700 speeds!

my rig is
CPU: 1700xp running at 2.3 (210 x 11) at 1.85v

Memory: 1 gig of PC3700 twister twinmos (little dissapointed about not getting much higher FSB's)

Motherboard: abit NF7 - S v2.0

PSU: Akasa 460W

Case: ClearPC midtower nicely modded :p:

Fans: 3 x 80mm, 2 x 120mm on radiator

Test prog: winbond hardware doctor

Temps: idle 35C -40C
Max load 45C
Case temps max of 25

Voltages: 12v = 11.8
5v = 4.9
Vio = 3.25
Vcc = 2.85
Vcore = 1.84

Am putting in 2500xp - m within the week, so we shall see what that gets, if it's at all better than the 1700 (lets hope it is)

[STEvil]

XP-M 2500+ @ 11.5x225.4 2.03v (2592mhz) on nF7.
SLK-900U + inverted ducted 50cfm 80mm
3x 120mm Delta EHE fans @ 5v on case (still as noisy as 50cfm 80mm).
Room Temp: 22c
D2OL Load: 49c
S&M Load: 59c

[jopers1986]

Xp2500 mobile at 200 x 12.5 (can't get higher FSBs, reckon incompatability with mobo and memory) at 1.9V even tho winbond shows 1.86V

Water cooling loop:

thermochill 120.3 (with 6 120mm fans) -> astek cpu block rev 2 -> Black ice pro (with 2 120m fans) -> Astek GPU block -> astek NB block -> bay res -> ehiem 1250 -> back to 120.3...

27.5 C kinda idleing, i was just using msn, pc was on for almost 4 hours as you can see from task manager

this case is practically a wind tunnel with 10 x 120mm fans, 1 x 80mm and 1 x 40mm :D

http://img.photobucket.com/albums/v288/jopers1986/temps_speeds_02_03_05_b.jpg

[Premmer]

System Configuration:
Lian Li PC65B Case
(2) Rear Fan, Panaflo 80MM, 40CFM – pull configuration, SpeedFan-controlled
(2) Front Fan, Panaflo 80MM, 40CFM – pull configuration, SpeedFan-controlled
AMD XP 3000+ Processor (unlocked) – @ 2.5G, FSB @ 200Mhz
Abit NF7-S v2 Motherboard - heatsinked MOSFETs
Antec TP II 480W Power Supply
Aqua Computer Airplex Evo 240 Fan Grill
(2) Sanyo Denki 120MM Fan, 102CFM – pull configuration @ 12V
Watercool HTF 2.0 240mm Dual Radiator – internally top mounted
Alphacool NexXxoS XP CPU Water Block
Swiftech MCP 600 Pump @ 12.0V
3 1/2-in. Dual Floppy Bay Reservoir
(~4 ft.) Masterkleer General Purpose Clear PVC Tubing 7/16-in. ID, 3/16-in Wall
Radiator Air Input Temperature LCD Gauge w/Wafer Probe (+/- 1C accuracy)
Block Water Input Temperature LCD Gauge w/Metal Probe (+/- 1C accuracy)
Crystalfontz Model 634 4-Line LCD
Motherboard Monitor 5.3.7.0
SiSoftware Sandra Standard 2004.SP2
CPU Burn-in v1.01

Conditions:
Idle Time = 1 Hr. – CPU Utilization at 0%
Load Time = 1 Hr. – CPU Utilization at 100%
All (6) fans running at 12V.
All readings are averaged over noted time period.
CPU loaded using CPU Burn-in with error detection disabled.

IDLE\LOAD
Room Temperature (C) = 21.5\21.5 – measured w/digital thermometer (+/- 1C accuracy)
Radiator Air Intake Temperature (C) = 22\23 – measured with LCD Gauge
Block Water Input Temperature (C) =24.9\25.4 – measured with LCD Gauge
CPU Core Temperature (C) = 34\39 – as reported by Motherboard Monitor
CPU Core Voltage (V) = 2.02\1.98 – as reported by Motherboard Monitor
CPU Core Power (W) = 122\118 - as reported by Sandra
CPU Cooling System Thermal Resistance (C/W) = (tCore-tWater)/W = 0.075\0.115

[tahuru]

Case
Antec Plusview 1000AMG

Processor
Amd64 Winchester 3200+ @ 2.0

Temps
Case temps 31/40 (X800 XT PE blowing hot air into case)
Cpu temps 27/34C

Temp Programs
MBM 5 / Corecenter

Measurement Time
Measured before/during/after 32M SuperPi run

Voltages
12V @ 12.83V
5V @ 5.08V
3.3V @ 3.34V
Vcore @ 1.3V @ 2.0Ghz

PSU
Tagan 480W


Ok.. im stunned. Im overclocked for the first time at 2.6Ghz with 1.6Vcore with my water setup and it idles at 28C. While running SuperPi 32M calculation the temps sky rocketed to 47C !!. But a few seconds after the run was completed the temps didnt gradually go down to 28C again .. it DOVE to 29C...and after a few more seconds down to 28C.. how is this possible ?

Picture @ http://img.photobucket.com/albums/v35/tahuru/A64/maxed_maybe.jpg
http://img.photobucket.com/albums/v35/tahuru/A64/case_opened.jpg

Thanks in advance.

[Smy]

CASE:
Lian li PC6277B


Processor:
amd64 3500+ 260*11 1.8vcore bench
263*10 1.74vcore 24/7

Cooling
Eheim compakt 1000l/hour
DD tdx
2* Dual procore
aquagrATIx, X800

Motherboard
Msi k8n neo2 54g

Temps:
CPU temp loaded @ 27 for 24/7 andre 30-32 for bench setting
GPU temp loaded @ 26 on 585/611mhz
Temp Program:
MBM 5.2.1.0 and speedfan

Measurement Time:
Rig at 100% load while Folding for 1days

voltages:
12v @ 12.00
5v @ 5..05
3.3v @ 3.33
DDRv @ 2.9

PSU:
Antec True Power 480w


picture

http://www.home.no/smy/dataromme/IMG_1008.JPG

[trgonz]

Does anybody have any numbers on an X2 4600 water cooled?

I get 40c idle... 48c 100% load

Air temp in the office is 81 F most of the time....

And yes I am useing a WC set-up

Gonz....

[LRV]

This Mine,
Сu Radiator, Cu WaterBlock (Handmade), 600l/h pump...

32 - idle
45 - burn

Prescott 3.2@3.9 ghz 1.45v (CO step)

[LRV]

in room - 32c

[Leeum]

Case:
Chieftec Matrix mid-tower

Processor:
Athlon 2600+ T-Bred B @ 2400MHz

Cooling:
Hydor L30 II
Maze4 CPU, GPU and Chipset
XSPC R120-D
Aqua Computer Aquatube (re-tapped threads to 1/2")

Temps:
Case: 25°C
CPU Idle: 35°C
CPU Load: 38°C

Voltages:
VCore: 1.568V (set as 1.65V in BIOS but something keeps undervolting :S)

[IYP]

AMD X2
stock volts

idle ~29
Load ~40

BTyphoon

[madmaxx]

CASE : modded antec plusview 1000amg

COMP SETUP : asus p4p800e-deluxe, p4 3.0e @ 3.45, BBA radeon x850xt pe, ocz pc 4000vx, ddr booster, powerstream520.

COOLING LOOP : swiftech storm, mcp-650, modded chevette H/C, 2 90cfm sunon fans with shrouds in push/pull, and t-line.

temps monitored with asus probe and hardcano12;

asus probe = CPU idle 25c, load 32c
hardcano12 (probe mounted to rear of mobo behind cpu skt) = CPU idle 28c, load 35c.

ambient of ~22c

[Absolute_0]

Setup in sig
3000+ @ stock, lightly undervolted @ 1.23v for fun ;)

Ambient = 20.0 C

Idle
http://img.photobucket.com/albums/v729/absolute035/overclocking/22c.gif

Load
http://img.photobucket.com/albums/v729/absolute035/overclocking/26c.gif

[max_Jaker]

CASE:
Storage Tub Wal Mart Edition


Processor:
Sempron 3000+ Retail BOX @2.5 ghz 1.6 volts core ram at 2.8

Cooling
stock AMD Heatsink with (radiator)cooled mineral oil dumping on it
Mobo is immersed in Mineral oil as well

Motherboard
Asus K8n

Temps:
CPU temp loaded @ 34c
"case temp" @ 28c
Temp Program:asus probe
Load program Seti@home normal priority for 4 hours
room temp 27c


And below with a 170w 15 volt aircooled (slot athlon heatsink) tec running at 5volts cooling the oil thru a waterblock on the cold side just to get closer to ambient. (until i get my new block for hotside)

Temps:
CPU temp loaded @ 31c
"case temp(NB)" @ 25c
Temp Program:asus probe
Load program Seti@home normal priority for 4 hours
room temp 26c

[sponge bob]

http://sponge.ez.pri.ee/data/media/3/2005-10-15-09h40-CPUGraph.gif
24/7 1,5v 2,8 ghz cooled by h2o ( black ice pro 2 , triple anatrica (astek) 1200l/h hydor 30l )

IDLE is 22 (room is 22)full load with 1,75v is 38*C :slobber:

[One_Hertz]

Cooling: BIX 3 with 3 80CFM 120mm panaflos, Iwaki-MD20RLZT, Swiftech Storm, cleaflex 60 1/2' ID tubing

Motherboard: DFI Lanparty NF4 Ultra-D

CPU: AMD X2 3800+ @ 2.6ghz@1.48volts

Temps: room ~22C
Idle: 24C
Dual prime load: 35C :p:

C/W= 0.092 C/W

[Gimmpy224]

[QUOTE=Hardass]CASE:
Swiftech Q, Pwr with Pelts
CPU, 226W
GPU, 80W

PROCESSOR:

1600@1938MHz 184.6 X 10.5


CPU Temp W/Full Load F@H 24c

QUOTE]

wow, thats pretty high for a pelt isnt it?

[Gimmpy224]

CASE:
Storage Tub Wal Mart Edition




lol :D man gave me quite the laugh, kudos on the creativity :thumbsup: :thumbsup:

[max_Jaker]

lol :D man gave me quite the laugh, kudos on the creativity :thumbsup: :thumbsup:


Hehe thanks :D
just incase u wonder how awesome the wal mart special looks.... its not that special lol.... this is a pic of it when i was cooling a duron 1300 with it before i got my sempron , i took the fans off the radiator just for the pic.
http://img.photobucket.com/albums/v458/max_Sleeper/DVC00371.jpg
as for pelt temp i think thats a little high but not too bad considering it probably folds 24/7 i use 5 pcs in my bedroom for seti@home classic it makes the room rather warm as well :eek:

and heres a picture of it now using outside air pulled down my chimney with 2 120v fans in push pull fully shrouded (duct tape lol) also i have a 170 watt 15 volt peltier running 5 volts air cooled with a waterblock on the cold side cooling the oil after the radiator just a little bit more not very much though because the block isnt efficient at cooling like that on a pelt but lowers my full load temps a bit. which is all i want until i get my other waterblock done anyway. and get a insulated container for the oil and mobo.
full load 29c now
nb temp 22c
http://img.photobucket.com/albums/v458/max_Sleeper/DVC00402.jpg

[jaguarking11]

Case: temporary old compaq striped down case. No fans.

Processor:
Intel 630 @ 4.35ghz

Cooling:
Hydor L30 (I know crappy pump)
Swiftech mcp5002-p with zalman bracket mod for lga. Maze4 gpu block.
Old econoline heatercore. Single 120mm evercool alu fan
Home made pvc pipe res. Lots of home depot barbs and 1/2inch tube

Temps:
Case: 32c idle 40c load
CPU Idle: 33c
CPU Load: 42c

Voltages:
VCore: 1.61 (undervolts to 1.58v due to crappy psu)

Crappy 550w psu with suposed 22amps on 12 rail

Psu Voltages as measured by abit uguru
cpu 1.58v
ddr 2.15v
12v-11.58v
5v-5.14
3.3v-3.34v

[snq]

Case: 8 year old noname maxitower

Processor: A64 X2 3800+ @ 2,5 vcore 1.475

Temps (measured with MBM and/or Everest)
Case temp 32C
CPU temp idle 26C, during an hour full load on cpu/gpu (playing Q4) max temp was 38C, average 36C.
If I enable C&Q, idle at 22-23C :D (pretty much room temp, I'm cooling the radiator with colder air from the floor)

Cooling:
CPU: RBX
GPU: Maze4
NB: Maze4
Black Ice Xtreme radiator with a papst 120mm fan (@ ~10V).
DD D5 pump @ half speed

[chew*]

case TT tsunami

cpu x2 3800 @ 2793 1.55vcore

cooling asetek waterchill pro 3x120mm fan with antartica block.

Idle temps 16C

Load temps well if figured I'd post a screenie cuz if I tell you you wont belive me.
http://members.cox.net/wmdieselmc26/X2-2800mhz.bmp

[M3kk]

Nexxxos XP , Nexxxos Extreme III , Eheim 1046

[trance565]

case antec plusview II - bottom hdd rack removed
cpu - stock winnie 3200+ (1.36v) = 26/34
2500mhz @ 1.4(5)v 29/42
only goes to 1.45 underload, rest of time it's at 1.4
loop contains
mp05 pro cpu block
laing d4
120 mm heater core (push&pull config)
1/2inch tubing

[joe.latino]

Hi!!
please see here my results and tweaks!!!:fact:

http://www.xtremesystems.org/forums/showthread.php?t=87394