View Full Version : Still some marvelous 2600+ xp-m around ?
Hi, since I'm getting a IQYHA 2600+ XP-M I'm curious about if the new XP-Ms are still as good as the old ones, anyone bought an xp-m last days ?
ocmyface
10-04-2004, 03:57 PM
the average on them is around 2.4-2.6 :(
the golden age of the xp-m has long since passed
JetForcegeminiX
10-04-2004, 04:47 PM
damn i was hoping to pick up a 2600+ to go for 3 ghz
Machiavelli
10-04-2004, 05:52 PM
Most people still seem to be getting 2.5+ out of them but you dont see to many over 2.7. I just picked a new one up from newegg but i cant test it till I get my vid card back from RMA.
JetForcegeminiX
10-04-2004, 06:08 PM
is that on air? i'm trying to get 3ghz on my prommy. so far i'm onyl at 2.875
blinky
10-04-2004, 08:14 PM
i have a week 401 that does 2.68 on alright air 3dmark stable
mebe ill sell it soon ;)
you guys speaking of random xp-m or random 2600+ or IQYHA and AQYHA 2600+ ?
and what voltage we're talking off ? Most users are wussies ang give them only 1.85v or so, that doesn't count for me! :D
TiTaNiUm
10-05-2004, 04:06 AM
I bought a IQYHA 0427 chip a couple weeks ago, Im running it on a NF7-S v2 (no mods) It overclocks like Mad, but i cant get it over 2.8, running in the high 2.7's is easy, I can clock this thing higher than my XP3200
I need 2 update my sig, now running 2 raptors, pny6800GT, 1gig KhXpc4000 8-3-3-3
Eversor
10-05-2004, 02:00 PM
sounds good
Hey Sai! How did you kill your 2600+?
Geforce4ti4200
10-05-2004, 02:08 PM
you might wanna make the move to s939 a64 winchester, I hit 2.6GHz on mine and its the old school 130nm newcastle, this is as high as moble bartons LOL
Hey Sai! How did you kill your 2600+?
condensation. I tried running my XP with ultra low voltage and I think this was a bit too cool for the nventiv sealstring.
;)
@GF4Ti4200
If you give me the money I'll switch to A64. So think about it ..
Geforce4ti4200
10-05-2004, 03:02 PM
"If you give me the money I'll switch to A64. So think about it .."
dont have enough of my own and besides you can get an a64 for a few $ more than another moble barton. Heck get sempron if you must
"If you give me the money I'll switch to A64. So think about it .."
dont have enough of my own and besides you can get an a64 for a few $ more than another moble barton. Heck get sempron if you must
Are you kidding me ? I'd rather die then getting a Sempron
:sick:
I posted in another thread on what mobile barton to put some money down on as well. Friend of mine just gave me his ASUS A7N8X Ultra and i figured i could drop some change on a good chip for it. From what someone else said in another thread ....
The Mobils are much better then the others and they are unlocked(!!).
My XP-M do 2800MHz @ 1,87V on water.
Try to get an Mobile with IQYHA MPMW/XPMW/RPMW from 0351 to 0406,
FQQ4C in Stepping is the most important, its the 45W 1,45V one.
Good Luck :)
I still need to find out which one to order and where. I usually get everything from newegg but if the week/stepping has to be specified i don't think they do that :(
At ebay.de you can order IQYHA 2600+ for 100euro. But you can't choose the substepping. Maybe if you drop an email to the seller, he'll select you one. I heard the best substepping is XPMW
Have you heard anything specific about the 35w one's vs. the 45w. I've seen a lot of ppl say get the 35w one but someone else said it wasn't the right socket yet it does say socket A. I'm confused heh.
err you mean the 2400+ 35watt ? they fit ..
damn this f&$%in son of a peach doesn't answer my question at ebay, this could take a while until I get my xp-m :mad:
TiTaNiUm
10-06-2004, 12:57 PM
Have any of you guys heard anything good about the 2600 with the stepping
IQYHA 0402 SPMW And the one
IQYFA 0350 MPMW
Thx
If you had to pick a 35w vs 45w which one would you get? I'm about to head to fry's tomorrow and pick me up one hopefully and if not i'll just order it online and take my chances.
Have any of you guys heard anything good about the 2600 with the stepping
IQYHA 0402 SPMW And the one
IQYFA 0350 MPMW
Thx
A few posts up you'll see some steppings mentioned that are supposedly really good " IQYHA MPMW/XPMW/RPMW from 0351 to 0406 ".
TiTaNiUm
10-06-2004, 02:32 PM
Yeah i saw that, but nothing about the S or the F letters..no big ..
If your looking for a Guarenteed step look on excaliberpc.com Theye have what your looking for.. :D
blinky
10-06-2004, 03:21 PM
this one should have good potential http://www.excaliberpc.com/product_info.php?cPath=178_186&products_id=4206
Geforce4ti4200
10-06-2004, 03:56 PM
is the sempron really slower than the barton? wonder why shade00 bought one if your moble barton crushes it
why the :banana::banana::banana::banana: you're talking about semprons now, that's definitely not the right place here, thanks !
WildKard
10-06-2004, 04:38 PM
A socket 754 Sempron crushes any Socket A CPU easily(probably because of the ondie memory controller), SocketA sempron is just a thoroughbred B though and sucks
I sold my 2600+ that clocked over 3ghz easily in prommy to Popcicle on the forsale forums...havent seen him around in a while...I wonder where he went :)
It was just a random chip, I dont think you should have much trouble hitting 3ghz in a prommy with any random 2600+
tictac
10-06-2004, 09:02 PM
Sai... are you still running on NF7S? Where is the A64 board? :stick:
Here some Vcore mod if you having undervolting issue
just pencil down resistor number 3 (circle with yellow in the pic)....
it will Overvolt the Vcore in no time :banana4:
http://forum.lowyat.net/uploads/post-2300-1096747732.jpg
Sai... are you still running on NF7S? Where is the A64 board? :stick:
Here some Vcore mod if you having undervolting issue
just pencil down resistor number 3 (circle with yellow in the pic)....
it will Overvolt the Vcore in no time :banana4:
http://forum.lowyat.net/uploads/post-2300-1096747732.jpg
hmmm undervolting on NF7 ? You can set the VCore to 2.3v via Bios, what do you mean ?
kristos
10-07-2004, 03:04 PM
I have it too with my board, 1.7V bios setting yields ~1.65 real V
so why not just upping the voltage to 1.75v :confused:
My IQYHA just arrived, anyone seen a BPMW yet ? 0434BPMW ?
MaxxxRacer
10-10-2004, 11:53 PM
My 2600m i got in august does 2.8ghz. well it did.... dead now..
naelq
10-11-2004, 06:45 AM
my XP2600+ IQYHA 0353 MPMW FQQ4C, it's a mad OCer! (compared to an ATHLON XP)
but though the MAX is 2.8GHz on AIR!! @ 2.0v vcore! with SP-97 @ 92mm Tornado. :D
a good speed for 24/7 use is: 12x225MHz=2.7GHz @ 1.875v actual (1.9 in BIOS) (L12 mod, NF7-S rev2.0 "OLD" with D26 BMXT BIOS) 3DMARK01 @ 20K with Radeon 9800 PRO R360 @ XT BIOS (http://service.futuremark.com/compare?2k1=8174132) :D
i didn't try my WaterCooling setup yet, but i don't think that it would change anything! :( almost all XP-M's MAXes @ 2.8GHz else if you use Phase cooling. :rolleyes:
BTW, it's for sale!! :( i must catch the A64 train! :D :D :banana4:
OK I just killed the CPU, it's the mofo board that kills my cpus. What to do now, I got NO money left ?!
naelq
10-11-2004, 07:47 AM
WTF?! did you kill the second one?!
Yep it has exactly the same burning marks as my former Tbred, so it's obvious that it's the board. BTW I broke my NF7 into two pieces, anyone want a half ? I got 2 of it :D :D
naelq
10-11-2004, 08:11 AM
ATM, i have 4 NF7-S rev2.0 & 1 AN7 !!! :D
Damn why you're so far away, could need a NF7 :(
mrlobber
10-11-2004, 10:13 AM
my XP2600+ IQYHA 0353 MPMW FQQ4C, it's a mad OCer! (compared to an ATHLON XP)
but though the MAX is 2.8GHz on AIR!! @ 2.0v vcore! with SP-97 @ 92mm Tornado. :D
a good speed for 24/7 use is: 12x225MHz=2.7GHz @ 1.875v actual (1.9 in BIOS) (L12 mod, NF7-S rev2.0 "OLD" with D26 BMXT BIOS) 3DMARK01 @ 20K with Radeon 9800 PRO R360 @ XT BIOS (http://service.futuremark.com/compare?2k1=8174132) :D
i didn't try my WaterCooling setup yet, but i don't think that it would change anything! :( almost all XP-M's MAXes @ 2.8GHz else if you use Phase cooling. :rolleyes:
BTW, it's for sale!! :( i must catch the A64 train! :D :D :banana4:
Where and for how much?
naelq
10-11-2004, 10:25 AM
what?!! :rolleyes:
mrlobber
10-11-2004, 10:46 AM
what?!! :rolleyes:
Did you definitely need to use those rolleyes? I asked about your 2.7Ghz stable Mobile 2600+... :cool:
Techmasta
10-11-2004, 10:49 AM
BTW I broke my NF7 into two pieces, anyone want a half ? I got 2 of it :D :D
Why didn't you RMA it?
naelq
10-11-2004, 10:51 AM
if you mean from where i did buy it?! then, it's from the first XP-M's we got in Israel. it was bought before 6 months. ;)
Why didn't you RMA it?
Cause there was tons of thermal grease, thermal compound, resistors, sinks, and so on. It would have taken days to clean that up.