OCZ Booster on boot-up

[Jrocket]

Well I just got my OCZ booster and I was reading through the manual and it said to leave it turned all the way counter-clockwise before you turn it on. I realize this is because on start up the voltage goes higher than normal, however once you find the voltage you want to keep it on can you leave it there and let it boot without worry or should you always turn it down before you boot? I would think the best thing to do would be put the voltage in the bios down to the minimum and than boot with the booster turned to the desired setting and after boot move it higher in the bios, would this be ok?
Thanks

[rhino56]

my booster was calibrated way off for my board. i got the lcd to read within .07V or so accurate to the actual voltage. when you first boot its not the actual voltage thats jumping around its the lcd if thats what your going by. at first my lcd was saying 3.0 volts and what was really being put to the ram was 2.7