WELL.......NOW guess what THIS does....Warning 56K / photos...

[hipro5]

As titlle says..... :D

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image7_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image8_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image9_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image10_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image11_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image12_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image13_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image14_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image15_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image16_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image17_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image18_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image19_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image20_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image21_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image22_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image23_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image62_jpg.jpg


http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image24_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image25_jpg.jpg


http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image26_jpg.jpg


http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image27_jpg.jpg


http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image28_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image29_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image30_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image31_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image32_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image33_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image34_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image35_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image36_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image37_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image38_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image39_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image40_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image41_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image42_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image43_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image44_jpg.jpg
http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image45_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image46_jpg.jpg


http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image47_jpg.jpg


http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image48_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image49_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image50_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image52_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image53_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image54_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image55_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image56_jpg.jpg

[hipro5]

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image57_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image58_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image59_jpg.jpg

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image60_jpg.jpg

[hipro5]

Did anyone talked about " Clean Power " ....? ;) :D



http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Filter_jpg.jpg

[Frank E. BoNeS]

Wow...excellent work Hipro...:toast:

Now where can I get one and how much? ;) :D

[hipro5]

It's an ALFA version....... ;)

The box will be made with aluminium with 1.5mm thickness which will be the heat sink as well as the massif aluminium where the transistors and the Mos-Fets are screwed on..... :)

[hipro5]

Wow...excellent work Hipro...:toast:

Now where can I get one and how much? ;) :D

Thank you.....BUT you didn't guessed what this is....!...... :D

[Boyne7]

that is beautiful..... im definately gonna want one of those lol, whats the eta for it?

[hipro5]

I haven't made my calculations yet of how much will cost......Maybe tommorow or the day after tomm...... ;)

[CTKP]

Thank you.....BUT you didn't guessed what this is....!...... :D
Its your DDR 1/2 booster :banana4: !! What do the red/green LEDs correspond to?

[hipro5]

Its your DDR 1/2 booster :banana4: !! What do the red/green LEDs correspond to?

Booster OR " Maximizer " ??........ :D

I'll explain later on...... ;)

[Evil_Spork]

looks like vdimm, vcore, and vdd maybe?

[CTKP]

Booster OR " Maximizer " ??........ :D ;)



I'll explain later on...... ;) :(
Coming along very nicely, man :toast:

[Frank E. BoNeS]

Thank you.....BUT you didn't guessed what this is....!...... :D


This (http://www.xtremesystems.org/forums/showthread.php?t=40609)? ;)

[hipro5]

This (http://www.xtremesystems.org/forums/showthread.php?t=40609)? ;)

:D :toast:

[WesM63]

That think is sooo sweet. Comon Hipro, I need one :) My EB needs some Voltage Luvin :)

[iceman2g]

Looks beautiful. Send one my way :D

[saaya]

congrats george! :toast:

sheesh were all those pics necessary? :rolleyes: alright alright your proud of it i guess :d and you deserve it! great work! :toast:

[hipro5]

congrats george! :toast:

sheesh were all those pics necessary? :rolleyes: alright alright your proud of it i guess :d and you deserve it! great work! :toast:

:D Neccecary for the "steps" it does...... :D

Thanks my friend....... :toast:

[WesM63]

lol I like this one:

http://www.thelab.gr/images/Hipro5/Multicontroler/jpg/Image24_jpg.jpg

[hipro5]

lol I like this one:


:D You can get this NO MATTER what PSU you have.......Not maybe 3.8 or 3.9 or 4.0 or 4.1.......STRAIGHT = 4.22Volts..... ;) :D

[TM0D]

Wow, awesome! I was looking forward to seeing it...:toast:

[shafty]

I may be blind but.. how does it plug into the motherboard?

[situman]

does it track vtt for non-vtt tracking boards like the IC7?

[hipro5]

I may be blind but.. how does it plug into the motherboard?

Don't be so fast.......Wait......You'll see.....This is the front Panel.... ;)

[hipro5]

does it track vtt for non-vtt tracking boards like the IC7?

Yes it does...... ;)

[Gogeta]

:slobber: :D :banana:

Excellent work Hipro! Very impressive - I didn't think you'd have a prototype finished so quickly.

I'd also like to know how it connects to the mobo...

[bachus_anonym]

i'm not sure if everything was implememnted that was talked about in the previous thread but that's what it looks to me like:

DDR Maximizer with "vtt tracker" and maybe "Vcore Maximizer" built in :) and it might connect from one of those green connectors to PCB that is inserted into DIMM slot... i just wonder what is that other wire that comes out of it... maybe the one that one solders to Vcore IC so the Maximizer works wonders for vcore too :)

EDIT: no, i was wrong... no Vcore Maximizer :(

- first 2 posts show how it raises vdimm with switches
- next one shows MIN and MAX using trimmer - switches OFF
- next is VTT tracking
- next one shows raising vdimm on DDR2 up to 2.4V
- and the last one shows vdimm on DDR2 at 3v (!) with trimmer.

excellent piece of work, hipro4 :toast:

[blinky]

looks like vdimm, vcore, and vdd maybe?
nein

its either vdimm for DDR, and DDR2,
or
vdimm, and vtt

[bachus_anonym]

yep, vdimm for DDR. then VTT and DDR2 :)

[Snowman89]

would it work if i have a motherboard that doesnt support vtt tracking?

[kromosto]

nice work hipro5 :toast:

every time you open a new thread it always make me :slobber:

nice to see you again :)

[spaceman]

Very nice! :toast: It sure looks beefier than a similar product, made by an unspecified company. ;) :D

[CTKP]

would it work if i have a motherboard that doesnt support vtt tracking?
Post #32
http://xtremesystems.org/forums/showthread.php?p=541790#post541790

[`schr0et]

/drool definetely nice work hipro. I still remember seing your IC7 Max 3 mods and nearly fainting the first time lol.

Great work, and congrats!

[hipro5]

i'm not sure if everything was implememnted that was talked about in the previous thread but that's what it looks to me like:

DDR Maximizer with "vtt tracker" and maybe "Vcore Maximizer" built in :) and it might connect from one of those green connectors to PCB that is inserted into DIMM slot... i just wonder what is that other wire that comes out of it... maybe the one that one solders to Vcore IC so the Maximizer works wonders for vcore too :)

EDIT: no, i was wrong... no Vcore Maximizer :(

- first 2 posts show how it raises vdimm with switches
- next one shows MIN and MAX using trimmer - switches OFF
- next is VTT tracking
- next one shows raising vdimm on DDR2 up to 2.4V
- and the last one shows vdimm on DDR2 at 3v (!) with trimmer.

excellent piece of work, hipro4 :toast:

EXACTLY what it does...... :D :toast:

Thank you...... :)

[hipro5]

nice work hipro5 :toast:

every time you open a new thread it always make me :slobber:

nice to see you again :)

Thanks M8...... :toast:

[hipro5]

/drool definetely nice work hipro. I still remember seing your IC7 Max 3 mods and nearly fainting the first time lol.

Great work, and congrats!

Thanks a lot...... :) :toast:

[Zeus]

Looks awesome man!

Do you have a picture of the interface with the mobo?

[hipro5]

Looks awesome man!

Do you have a picture of the interface with the mobo?

No I don't have yet......

Zeus you have the name of an upcoming project of mine...... ;) :D

[The Byter]

The VTT issue stays ?

great job...

[Zeus]

No I don't have yet......

Zeus you have the name of an upcoming project of mine...... ;) :D


OMG, I'm honoured! :D

Make it something wild mate! :up:

[hipro5]

OMG, I'm honoured! :D

Make it something wild mate! :up:

:D It will be WILD.......A BETA one will be shown on an exibition here in Hellas at 3rd or 5th of November...... :toast:

[hipro5]

The VTT issue stays ?

great job...

What VTT issue?........

Thank you..... :)

[aoc007]

What would be required for us to fix the VTT track, I mean do we still have to mod something on the mobo? Or is it just plug in the molex and plug into the dimm for it to work?

Excellent work :D You'll have my money when its available ;)

[Crankster]

According to the other thread, yes

[Kako]

The reading on the front panel, is that the intended voltage to be given, or the actual voltage being given to ram.

[LikwidKool]

it's pretty! Good luck.

[ojdr2001]

Out of words. Excellent work hipro..... :toast: :toast:

[Toki]

Beautiful work Man!

You are amazing, now we'll waiting some particular as how connect to the mobo, ecc...;)

Really congrats!

:slobber:

[NapalmV5]

Awesome DDR I/II & VTT Maximizer, it's gonna be mem heaven.

I'll definately get 1 or 2.

What about Northbridge, AGP/PCI-E ?

[ArcTan]

awesome stuff there hipro :toast:

[Shaman]

You're THE MAN!!!!!!!
Show the rest of it and finish us off!!!!

[hipro5]

What would be required for us to fix the VTT track, I mean do we still have to mod something on the mobo? Or is it just plug in the molex and plug into the dimm for it to work?

Excellent work :D You'll have my money when its available ;)

For fixing the VTT track the only thing you have to do is........PRESS the VTT switch to ON.......Not that hard I think....!...... :D

[hipro5]

The reading on the front panel, is that the intended voltage to be given, or the actual voltage being given to ram.

It's the ACTUAL voltage being given to Ram (Vdimm or VTT)........It measures it's output...... :)

[Jeff]

Wow... :slobber:

(Sorry, that's about all I can come up with...)
:toast:

[hipro5]

Awesome DDR I/II & VTT Maximizer, it's gonna be mem heaven.

I'll definately get 1 or 2.

What about Northbridge, AGP/PCI-E ?

Thanks...... :)

I have some ideas about them too.......Also saaya gave ne a good idea too....... ;)

.......BUT for the other ideas you HAVE to solder cables on the mobo so as to work........

One idea is - the same panel - which will feed the Northbridge (Vchip) and the VAGP and maybe become ONE idea so as with the same panel we could feed our VGA card with four cables soldered so as to control via panel of caurce the : Vcore of the VGA card , the Vmem(Vdimm) , the Vddq , and whatever needs voltages on our VGA cards......PLUS the Northbridge and the Vagp of our mobo........Future dreams..... :)

[hipro5]

Wow... :slobber:

(Sorry, that's about all I can come up with...)
:toast:

:D Thanks Jeff......... :toast:

.......and thank you all guys....... :toast:

[Crankster]

With this thing i'm gonna kill both ram and mobos!
My 8RDA+ is going to die.
My AN50R is going to die.
My IC7-max3 is going to die.
But first my ECS-crap with built in AGP dies!

[hipro5]

Ahhhhhhh...........I forgot to mention that I've ordered 100 Led Displays (showing the voltages) in BLUE - BLUE - BLUE color.......just for testing..... :D

I wonder WHO will be those lucky 33 ppl who will get the BLUE ones..... :up:

I'm also working on a "handmade" front panel face so as to cover up this thing......Hmmmmm.........In black color..... :D

[hipro5]

With this thing i'm gonna kill both ram and mobos!
My 8RDA+ is going to die.
My AN50R is going to die.
My IC7-max3 is going to die.
But first my ECS-crap with built in AGP dies!

:D :D

[kromosto]

dont care about the color of leds mine can be pink :D the color i interested is the color of ram when it get 4.22 lol :D

[hipro5]

Some technical info :

Can produce up to 4.22 Volts and up 2.11 Volts separate each other.....

The - max - 4.22 Volts line can produce 25+ A (actually 29 A)......and 34+ A at 3.6 Volts output......A total of 125 Watts power for this line......

The - max - 2.11 Volts line can produce 18+ A (actually 19 A)......and 22+ A at 1.8 Volts output......A total of 40 Watts power for this line......

They are both short cirquit protected and overvoltage protected....

The mainboard(the one on the photos given above) is also thermal protected by it shelf......

At load of 25 A one line and 6 A the other line , it produces about 52 - 54*C of heat.....We are gonna play with 12 A and 3 A max with 2 x 512MB Ram sticks so you'll encode no problem..... ;)

You can feed with this thing , TWO computers at the SAME time , thas 4 x 512MB Rams sticks......It's capable of giving this watage with "joy" IF your PSU's 5Volts line is strong enough to feed it..... :D

NOMATTER what PSU you have , you'll get the max 4.22Volts for REAL and NOT maybe 3.7 or 3.8 or 3.9 or 4.0 or 4.1 or we will see......You'll GET them...... ;) :)

The whole box will be a 3.5" bay and it will consists of pure alouminum of 1.5mm fatness which will be the heatsing as well as the masiff aluminum where the transistors and the Mos-Fets are screwed on......

That's for now......and we will continue........ :D :toast:

E D I T 1. : The front panel face will be in black and alouminum Lian-Lee colors - anodized......
The PCB's will be black with gold(or something like that) letters and components drawing......

E D I T 2. : The MAX voltage faulse at full load a.k.a. 25 A is 10mVolts...... ;)

[hipro5]

dont care about the color of leds mine can be pink :D the color i interested is the color of ram when it get 4.22 lol :D

Hmmm........I think first will be orange , then red and after that brown to black with some spots on it of bubbles or something like that , or even without their "clothes" on......Like they are stripping or something....... :D

[The Byter]

sign me up 4 1 !

I'll pre-pay if needed :)

:slobber:

[bias_hjorth]

wow impressive :slobber:
Looks like a job done by a (HI)pro. Oh it is.. :D
Awesome cant wait to hear some results :toast:

[DarkManX_BG]

Great job :slobber:

Only one thing worries me though - what price range are we talking about? :confused:

[hipro5]

wow impressive :slobber:
Looks like a job done by a (HI)pro. Oh it is.. :D
Awesome cant wait to hear some results :toast:

Thanks M8..... :D :toast:

[hipro5]

Great job :slobber:

Only one thing worries me though - what price range are we talking about? :confused:

I'll seat down today or tomorrow so as to figure how much the components cost and the working hours and I'll post it...... ;)

[Cranox]

Nice piece of work u got there Hipro5 :up:

[Murmlos]

Is it possible to get 1 even if ya live in the far north(sweden) ?

[situman]

when do you think the final version will be done?

[TASOS]

Thank you.....BUT you didn't guessed what this is....!...... :D

I found it :D

It's a rev 1.00 hipro5 magical device.

I could say it looks like a μουλτι...κο...ρ :D

I believe i just won the 1st retail device :toast:

Excellent job m8.

[LarsK]

I've got to hand it to ya' hipro5. Not only is it a great achievement, and a must have for guys like me, but you also picked the perfect colors IMO. Black plate and blue LED's. Not only is it way stylish, it will also fit/work perfectly with my current setup :p:

Personally I don't care how much it's going to cost, I've just got to try it out asap..... :banana:

[hipro5]

Thank you guys...... :toast:

Final release will be out soon........First we'll do some beta testing and get a CE (European) certificate so as we can sell it in Europe.......In the meantime we have to get some other certificates for International selling as well so as to sell worldwide......One step at a time.......Europe of course will have it first and VERY soon I suppose....Other countries users could buy online off course via an online European shop and fortunately we have offers for resellers all over Europe..... :D

[neyoung]

WTG Hipro! Do you know if the "maximizer" will be able to get around the over volt protection that the asus a8v has? The ovp kicks in at 3.1v on the vdimm. I would love it if it did!

GREAT JOB!!!

[hipro5]

WTG Hipro! Do you know if the "maximizer" will be able to get around the over volt protection that the asus a8v has? The ovp kicks in at 3.1v on the vdimm. I would love it if it did!

GREAT JOB!!!

Unfortunatelly NOTHING can interfear and disable any OVP ..... ONLY mods will....... ;)

[musk]

Hipro5,

Another jaw dropper. I am hoping that you are still partial to Canadians cause I would love to a couple of those units.
Keep up the great work!

musk

[LowRun]

Woaw, astonishing work you've done Hipro5 :worship:

And it even will be available in Europe first for once :hehe:

[texuspete00]

Gah.... all we need is one big a$$ box off 'em. :hehe:

Like another entrpreneur buys 100 and makes a few bucks dealing with it all.

It's Ok though, I understand you want to get all your ducks in a row.... just HURRY :D

[Arnar]

Thats just fantastic piece of eqiupment!

I want one! :)

Can you send one to Iceland now? :rolleyes:

Is there any chance of an other device as that which controls the vcore?
Good job! :banana:

And how will you make this for every one? You cant handmade every single piece now can you?

Do you have some factory or some to make this for you? :D

[eshbach]

i would definately be wanting this thing if my bios didn't already go up to 4.0vdimm...

then again, it would save me from a 3.3v rail mod...

ah, decisions decisions :)

[Lithan]

Looks beautiful... Have you done any testing with it and 2x512 sticks on motherboards to see how well it works? If it feeds/reads through the dimm slot like the OCZ booster, I noticed it KILLED my rams overclockability on both boards I tried it in. (Even with 3.2vdimm, ram couldn't clock as high as with 2.8vdimm).

[masterofpuppets]

Yhey, looks good. If the post still exists, use the logo I made hehehe. Are you gonna retail these things?

[WeStSiDePLaYa]

wow, looks killer! :) :slobber: now we can all kill our ram the "hipro5" way!!! score! :)

[Blind_GI]

Awsome Hipro!

I can't wait to try one of these out!

[L0$t Pr0PhEt]

Thats some impressive work you did HiPro, congratz :toast:

[WeaponX]

Very nice Hipro!!!1 :toast:

Question, it must be a 5.25" bay right? if so, is there going to be a 3.5" version? cause if there is I'M THERE BABY!!

Blue LED + Silver Lian Li Cover = L337!!!!

[texuspete00]

Check the pics man one is sitting on top of a floppy drive and it looked the same size to me. Maybe I looked too quick. Either way the answer is there.

edit: nope didnt look too quick. 2nd to last picture.

[aoc007]

Very nice Hipro!!!1 :toast:

Question, it must be a 5.25" bay right? if so, is there going to be a 3.5" version? cause if there is I'M THERE BABY!!

Blue LED + Silver Lian Li Cover = L337!!!!

Its 3.5" he says it earlier.

[cetoole]

Did you test it to see what it lets you do with your FSB? Looks great (Checks BWI website for flight times to Athens)

[bh2k]

Very very nice work hipro. How much actual math was done in order to do this?

[iceman2g]

i'm sure a lot of people who will be buying hipro's maximizer.

[aoc007]

i'm sure a lot of people who will be buying hipro's maximizer.

Yeah I will be....

[fareastgq]

Great work Hipro, I think I'll be taking one of those some time,.....

[Jeff]

Edit is your friend... :lol:

[masterofpuppets]

I would like to see hipro's units go retail.

[blinky]

Could u maybe have a socket adapter that would feed the vCore, just like youre feeding vdimm with a dimm stick

[sparkie34]

Good job Hipro! :up: Excellant work! Don't let anyone tell you different.

[saaya]

karnivore edited this thread and removed/edited all patent right related posts.
please understand if we removed/edited one of your posts as well.

we thougt its better to remove that discussion as its not getting anybody anywhere and was resulting in several people flaming... and the real facts are not going to be discussed in public anyways.

so please stay on topic and dont post anything patent related or flame ocz, thx :toast:

-saaya
-karnivore

[jinu117]

Have DDR booster working on my machine already but willing to shell out for Maximizer any time... :) Don't let me keep waiting... heh.. :) Sucks to be in US at this point.

[berkut]

hipro5 .... YOU ARE INCREDIBLE!

I hope ill have 1/100 of your skills after college!

[hipro5]

Thats just fantastic piece of eqiupment!

I want one! :)

Can you send one to Iceland now? :rolleyes:

Is there any chance of an other device as that which controls the vcore?
Good job! :banana:

And how will you make this for every one? You cant handmade every single piece now can you?

Do you have some factory or some to make this for you? :D

First of all , I want to thank you guys.... :toast:

Now....shipping will be ready as soon as we get the CE certificate(approvement) - not too many days - ...... ;)

I will make about 10 to 15 pieces for beta testing myself and the others will follow the "normal" robotic procedure... ;) :D

For VCore I don't think so but I'll keep it in mind.... ;)

[hipro5]

Looks beautiful... Have you done any testing with it and 2x512 sticks on motherboards to see how well it works? If it feeds/reads through the dimm slot like the OCZ booster, I noticed it KILLED my rams overclockability on both boards I tried it in. (Even with 3.2vdimm, ram couldn't clock as high as with 2.8vdimm).

:D

It "plays" +/- 10mV at full load at 25 A.......Is that good or not.?.....Ex......We have picked the 3.65Volts...It goes - sometimes - 3.64 to 3.66 Volts.....I don't think a +/- 10mVolts are that bad!.... ;) :)

I - yesterday evening - tested as a full and complete device and not the pcb's and parts on air as I did when I was expirament on it on my ABIT IC7 mobo and I must tell you that I am the happiest man(overclocker) on this world.... :D

Memtest-86 errorfree with DUAL DDR on a full moded IC7 , I was at 265MHz with 2-5-2-2 - Streetracer - Enhanced - 4 - Enable - Enable......Now I did 270MHz DUAL DDR with those settings(ppl with IC7 know how "hard" are those settings to play with)......at 3.65Volts......You see IC7 over 3.53Volts it's not stable.....The Vdimm can go from 3.51 to 3.58 Volts..Thats a pboblem coz the VTT is stable and it doesn't follow the Vdimm....Maximizer DID it's job PERFECT.....Problem now is that I've almost killed my CPU - about a month now - by feeding it with 2.1VCore and CPU can't go any higher so I have to RMA it to get a new one.....BUT I'll stuck up my ES P4 Northy to see how the whole system will go....Temperature on the Maximizer with 2 x 256MB Rams at full-full-full load , was 30*C with a 26*C room temp... :D

[hipro5]

Very very nice work hipro. How much actual math was done in order to do this?

Thank you..... :)

It was hard to be done - the mainboard was a pain in the ass(f).....About 8 hours a day for a month and so now - most of them(hours) from 11.00pm to 7.00am on the morning coz I have other job to do for living.....Sleep was rare....I was most of the time awake for over 40 hours a day!!!.....Job and experiment and designing .....It was a hard month+(actually over 1+1/2 month) for me..... :(

Now........Do the math..... ;) :D

[Pieros]

No I don't have yet......

Zeus you have the name of an upcoming project of mine...... ;) :D

:D :D :D

well done keep going

[hipro5]

Could u maybe have a socket adapter that would feed the vCore, just like youre feeding vdimm with a dimm stick

First of all I DIDN'T mention HOW do I feed the Rams..... ;) :)

Now .....For the VCore IF you are able to solder 6 cables on the mobo then it should be OK.... ;)

[hipro5]

hipro5 .... YOU ARE INCREDIBLE!

I hope ill have 1/100 of your skills after college!

Don't be...... :(

If you deside to follow something like that you have two options :

1. Dedicate on what you do and be better every day it passes.......BUT NO family...... :(

2 . Family and do something else..... :)

I'm not ashamed to tell you that I HARDLY keep my family "alive".....Three months ago I was almost going to have a devorse with my wife for the electronics.....We finaly work it out..... :)

IF you want a family - but you're too young now and you may not see it now but after some years you HAVE to face it....- follow something else....NOT electronics.... ;)

[VoRtAn_MaDgE]

I've just see this thread right now Hipro...
Amazing how u don't stop :slobber: me !
That's what i call a very nice damm work :D
Congrats for your work doing a piece of hardware that will help lot's off persons...specially the guys that are affraid modding their own hardware with vmod's!
Nice to see the compatibility with the today's hardware and the tomorrow's too, glad u "kill" the vtt issue!
I guess that u just win one order from portugal ;)

Keep the good work m8...5* :toast:

[hipro5]

I've just see this thread right now Hipro...
Amazing how u don't stop :slobber: me !
That's what i call a very nice damm work :D
Congrats for your work doing a piece of hardware that will help lot's off persons...specially the guys that are affraid modding their own hardware with vmod's!
Nice to see the compatibility with the today's hardware and the tomorrow's too, glad u "kill" the vtt issue!
I guess that u just win one order from portugal ;)

Keep the good work m8...5* :toast:


Thank you M8..... :)

[hipro5]

I was just informed of what happen to this thread yesterday evening - I was few hours out and look! - ........I'll see what I'll do...... ;)

[Rio71]

mmm... this design seems to be a little bit overengineer'ed. :yawn:

[Volcom]

hipro5

Your the man!!! Well done

[reject]

i am happily wating.
ive got an idea, for those of us who use cases, how about some spade plugs to incorporate in the solder lines, so the mobo can be removed easily. :toast:

[masterofpuppets]

What motherboards will this actually work on?

[reject]

all id say, just need ovp moddage. and soldering if you dont want to lose a slot

[Daidalos]

As allways great work hipro!!! All the wait, and all your work, seems to pay off in the best possible way!!! Εύγε!!!
Keep up the good work!!!

[WeaponX]

Hipro, is there any way us Americans can secure one (especially one with the blue LEDs)?

[dutchman.pt]

Hipro, very nice work.
You maximizer puts everyone :slobber: ! :banana:
I would like to know if your maximizer will be compatible with DFI Lanparty Nforce 3 250Gb scoekt 754?
If it works you just won another order from Portugal for your wonderful maximizer. :)
Keep up with the excelent work, m8. :)

[Mag Master 21]

will these be compatable with the DFI Lanparty UT, and can it kill A64 chips due to overvoltage?

[sparkie34]

ANYTHING, can be killed due to overvoltage. The higher the voltage the higher the risk.

[reject]

i think he menas by running vtt over 1.7v or vdimm 3.4v

[Breathless]

I am eagerly awaiting for the release of this product. You've got another sale. Well Hipro, you went from just barely supporting your family to coming up with an invention that will suport them for a long time. Congradulations and God Bless. Keep the inventions coming! ;) :toast:

[hipro5]

What motherboards will this actually work on?

Beta testing will start this week and we'll see......BUT I think it'll be compatible with all mobos out there...... ;)

I have to make a notice to everyone......

NOTHING can disable the OVP protection at any momo out there.....Only mods.....I repeat myshelf so as this thing to be clear....... ;)

[blinky]

next thing u know ull have to sell OVP bypass kits ;) ;)

[hipro5]

next thing u know ull have to sell OVP bypass kits ;) ;)

:D

No but we all can help each other for a simple cut of a line on mobo which is responsible for the OVP thing.... ;) :)

[blinky]

:D

No but we all can help each other for a simple cut of a line on mobo which is responsible for the OVP thing.... ;) :)hehehe, DFI might have to ship boards with "turn off OVP" in the bios

[hipro5]

Hipro, is there any way us Americans can secure one (especially one with the blue LEDs)?

IF we get a good deal with the blue led displays - they are quite expensive for the time been - we could produse them with red and blue ones.....

At the very first time ppl outside Europe will be able to get one of these by an online European store.... ;)

[hipro5]

will these be compatable with the DFI Lanparty UT, and can it kill A64 chips due to overvoltage?

Overvoltage can kill everything.......Though in subzero temps it's harder to kill a CPU....BUT it's luck in the draw.....Overclocking is gambling..... ;) :)

[Volcom]

Did you find out the price yet?

[LikwidKool]

Did you find out the price yet?

I would have to guess..... ALOT! I am thinking maybe $200?

[hipro5]

I am eagerly awaiting for the release of this product. You've got another sale. Well Hipro, you went from just barely supporting your family to coming up with an invention that will suport them for a long time. Congradulations and God Bless. Keep the inventions coming! ;) :toast:

Who told you that I was "barely" suporting my fimily?..?....?......We're doing OK......PLUS an 3.4GHz EE CPU , 2 x Prometeias , 1 x 3.2GHz ES sample and some cheepy instruments like HP , Tectronix , Hameg , Marconi , Fluke , etc..... :D ;)

http://www.thelab.gr/images/Hipro5/Temp/Instr_1_jpg.jpg

http://www.thelab.gr/images/Hipro5/Temp/Instr_2_jpg.jpg

http://www.thelab.gr/images/Hipro5/Temp/Instr_3_jpg.jpg

http://www.thelab.gr/images/Hipro5/Temp/Instr_4_jpg.jpg

http://www.thelab.gr/images/Hipro5/Temp/Instr_5_jpg.jpg

http://www.thelab.gr/images/Hipro5/Temp/Instr_6_jpg.jpg

Do a research of how much those models costs : Hewlett Packard 8753B Network Analyser , Hewlett Packard 8591A , Hewlett Packard 8756A , 83545A , 2 x 66312A , Tektronix 492AP..etc......ONLY the instraments cost over 100.000 Euros not to mention the other stuff....I think I can support my family well , don't you think so?... :D

Thank you.... :)

[hipro5]

Did you find out the price yet?

Not yet....

[hipro5]

I would have to guess..... ALOT! I am thinking maybe $200?

No.......Less than that..... ;)

[NoX]

Hipro5 I admire your skills and your work. It seems like you have no limits. Where did u acquire so much knowedge? Are u an engineer?

By the way, I'll be one of your future customers. :toast:

[Tedinde]

Don't be...... :(

If you deside to follow something like that you have two options :

1. Dedicate on what you do and be better every day it passes.......BUT NO family...... :(

2 . Family and do something else..... :)

I'm not ashamed to tell you that I HARDLY keep my family "alive".....Three months ago I was almost going to have a devorse with my wife for the electronics.....We finaly work it out..... :)

IF you want a family - but you're too young now and you may not see it now but after some years you HAVE to face it....- follow something else....NOT electronics.... ;)

I know the feeling. The wife hates my computers and me working on them all the time., but then she loves the Big house she lives in.

I shall be a future customer, And your USA distributor HiPro!!! Im guessing if it works out your going to have to outsourse the manufacture. Or put the wife and kids to work with the soldering irons.

[AZN]

I think i need more pics to figure it out ;)

[Tedinde]

I think i need more pics to figure it out ;)

Or figure out how to make one yourself!!!. Just kidding.

Im studying the pics on how much is prebuilt if any and how clean it is. I tried my hand at etching some boards myself, and breadboards in the past. When i was 17 i had a job soldering small parts @ a Solar cell manufacturing plant in the summer.

That's a lot of fine work that's done in their and over doing it. Hopefully the build quality for the retail units will match that.

[hipro5]

I know the feeling. The wife hates my computers and me working on them all the time., but then she loves the Big house she lives in.

I shall be a future customer, And your USA distributor HiPro!!! Im guessing if it works out your going to have to outsourse the manufacture. Or put the wife and kids to work with the soldering irons.

Ahhhhh.......Another one with the exact same feeling.... :D

No job for them.....For soldering things I'll give it to a company that does that and after I get them completely ready from them , the FINAL check on EVERYONE of them , will be by me coz we don't want to have any failures or any unworkable devices out there....PLUS if the whole thing goes right , the RMA - IF any - will be so quick that I think that everyone will be happy.....I'm counting in "the same day RMA" or a "ONE day MAX RMA" no matter what.....For EVERY DAY of delay , the customer will get 5 Euros or 5 Dollars for his patient.....That's a statement of mine and will be official.... ;)

As for the distributor thing....accepted.... ;)

[hipro5]

Hipro5 I admire your skills and your work. It seems like you have no limits. Where did u acquire so much knowedge? Are u an engineer?

By the way, I'll be one of your future customers. :toast:

Yes I am.....RF Manufacturer - engineer - designer...... ;)

[hipro5]

I think i need more pics to figure it out ;)

Hi there AZN......Nice to see you around old friend.... :D :toast:

[hipro5]

Or figure out how to make one yourself!!!. Just kidding.

Im studying the pics on how much is prebuilt if any and how clean it is. I tried my hand at etching some boards myself, and breadboards in the past. When i was 17 i had a job soldering small parts @ a Solar cell manufacturing plant in the summer.

That's a lot of fine work that's done in their and over doing it. Hopefully the build quality for the retail units will match that.

When you see the final PCB's , I think you'll be amazed...... ;)

[kostas7gtr]

Great Work Hipro5 ! This "maximazer" Rocks ! Keep up the good work George !

[Pejsen]

OMG Hipro soooo coool :D

[ojdr2001]

Hipro, I forgive you the defeat on the EC final...... :D :D

Excellent piece of art..... :toast: :toast:

Going to need half a dozen for the crazy people around here.... :banana:

[hipro5]

OMG Hipro soooo coool :D


Thankks.... :)

[hipro5]

Hipro, I forgive you the defeat on the EC final...... :D :D

Excellent piece of art..... :toast: :toast:

Going to need half a dozen for the crazy people around here.... :banana:

Thanks M8...... :D

You are also doing well as I see..... :)

[NapalmV5]

Thanks...... :)

I have some ideas about them too.......Also saaya gave ne a good idea too....... ;)

.......BUT for the other ideas you HAVE to solder cables on the mobo so as to work........

One idea is - the same panel - which will feed the Northbridge (Vchip) and the VAGP and maybe become ONE idea so as with the same panel we could feed our VGA card with four cables soldered so as to control via panel of caurce the : Vcore of the VGA card , the Vmem(Vdimm) , the Vddq , and whatever needs voltages on our VGA cards......PLUS the Northbridge and the Vagp of our mobo........Future dreams..... :)

Nice, very nice. Come on Hipro, a little bit of modding ain't gonna hurt anyone, lol. I hope that by future you mean months soon, not years, lol.

Also, would be nice to be able to hook up the motherboard power supply to the panel to get it in shape and by the way the panel looks like, it's not gonna have a problem doing that too. :D

M8, i wish you the best, i hope in the end it all works out for you and your Family. :toast:

[zyx]

hipro you are the best :D

[Breathless]

I apologize Hipro, maybe i took the wrong meaning to this statement:

"I'm not ashamed to tell you that I HARDLY keep my family "alive".....Three months ago I was almost going to have a devorse with my wife for the electronics.....We finaly work it out..... "


I thought this meant that by hardly keeping them alive you meant struggling to support them. Oh well, keep up the good work bro :toast:

[hipro5]

I apologize Hipro, maybe i took the wrong meaning to this statement:

"I'm not ashamed to tell you that I HARDLY keep my family "alive".....Three months ago I was almost going to have a devorse with my wife for the electronics.....We finaly work it out..... "


I thought this meant that by hardly keeping them alive you meant struggling to support them. Oh well, keep up the good work bro :toast:

DON'T worry M8........... :D

I was going to have a devorce coz she wanted to have me more time with her by her side and I was always out even at nights.......She got bored of this situation and after my looooong tries , I gained her again......We where separate about 25 days......BUT I think that she was playing a game so as to gain my attention.......After that , no more delays for me my friend.......Woman wants you at her side at night......Go and sleep with her and when she sleeps........Stand up and ....RUN to your computer...... :D :D :toast:

P.S. Computers suck our lifes........ :D

[Breathless]

:p: :D :banana:

[iceman2g]

Which boards have you tested maximizer with so far?


Woman wants you at her side at night......Go and sleep with her and when she sleeps........Stand up and ....RUN to your computer......

hahaha.

[cetoole]

When will we see the rest of this device? The part that connects to the mobo.

[hipro5]

Which boards have you tested maximizer with so far?



hahaha.


ABIT IC7 series and ASUS P4C800 series......BUT I'm consentrating more these days for the stability of the Maximizer.........I managed to drop a little bit it's +/- 10mVolts at full load of 25A to only +/- 1.5 to 2 mV*( * 70
*C internal temp)...... :D

So with a multimeter you can read at ANY load up to 25A , 3.60Volts.........and NOTHING more or less......I think I can stop now about the stabilisation thing......It's OK.....You have to have a more than 3 1/2 digits multimeter to see the differencies.....

This week will be the testings on other mobos too..... ;)

[hipro5]

When will we see the rest of this device? The part that connects to the mobo.

You will see it soon - very soon....... ;)

[hipro5]

At this point I have to make clear some things....... ;)

The BIG IC you can see on my design(photos) it's similar as OCZ's one........

This is ONLY a GENERAL perpuse IC to READ ONLY the Voltages........It's noones pattent(exept the company's that has design it).......You can find it EVERYWHERE on planet and even MOST of you have one into you cheepy or not multimeter.......This is the ICL7107 IC 3 1/2 digits for driving Led Displays.........Into your multimeter (go ahead and unscrew it) you will have the ICL7106 which is for driving an LCD ......SO keep your mind away about this and some short of pattent ....... :)

[LikwidKool]

.......Woman wants you at her side at night......Go and sleep with her and when she sleeps........Stand up and ....RUN to your computer......[/B] :D :D :toast:



I find this funny as I do this very often!;)

[hipro5]

I find this funny as I do this very often!;)

It's a "trick" that it always works........ ;) :D

Next is when she gets up at 2.00 am and she finds you infront of your computer......"WHAT are you doing here?"..........Nothing honey , I just couldn't sleep and vouala......or my stomach hearts and I came here so as to forgot about it...... :D

Anyways.........off topic BUT these happens to us ALL the time............DO YOU HEAR THE SINGLE ONES.....???? :D

[G H Z]

Yes and when she find you there at 2 am looking at nudie girls look out:D

[xgman]

Well just tell her that your finally going to make some decent $ on this one. ;)

[blinky]

Woman wants you at her side at night......Go and sleep with her and when she sleeps........Stand up and ....RUN to your computer...... :D :D :toast:

[B]HAHAHHAAHAAH

[BALDY]

WOW hipro5, that is incredible. You always seem to do something amazing. You have always been generous with your knowledge of electronics and you don’t mind sharing it with us all. I’ll definitely support you, I’ll take 2 orders when they are ready for shipping.

That’s the least I can do. :toast:

[Breathless]

just from this thread alone your gonna sell at least 50 units. LoL :banana: :toast:

[Detract]

just from this thread alone your gonna sell at least 50 units. LoL :banana: :toast:


Make that 51! I sincerely hope this comes to fruition, for our sakes and hipro's.

[reject]

i want to get a hipro5 psu! 800w, 40A on the 12, 3.3 at 3.5 stock...

[jinu117]

Well just tell her that your finally going to make some decent $ on this one. ;)

That never seems to work for me... For some of us, it is not matter of money after the safe margin... it's the time. Trying to balance it is tricky business indeed. (kids adds even more complexity to it :))

[hipro5]

i want to get a hipro5 psu! 800w, 40A on the 12, 3.3 at 3.5 stock...

Thanks guys.......Update info SOOOONNNNN......... :D

For PSU stuff it's too early to discuss about..... :D

[hipro5]

That never seems to work for me... For some of us, it is not matter of money after the safe margin... it's the time. Trying to balance it is tricky business indeed. (kids adds even more complexity to it :))

Agree 100% ....... ;)

[Breathless]

(anticipating updates oh so much) :banana:


gotta love the dancing bananas.. :banana: :banana: :banana: :banana: :banana: :banana:

[aarion]

wow, no wonder this place is call xtremesystems. even the ppl are xtreme. see what technology has made man to be. Man crazy over woman is understandable. But crazy over machine, that what we call XTREME. :banana:

Hipro, i would also wan on formyself. hehehe. How much are we talking for your marvellous piece of art? :toast:

[reject]

60 usd was the original price i think, but its a lot better now

[Breathless]

I can't wait till he figures out how to do the VAGP and VDD on the fly as well, oh man that will be cool. :cool:

[Spec3]

60 usd was the original price i think, but its a lot better now


LOL yah right. This will cost minimum $100 and that is only if he gets them made in large batches. Just look at the components on there that we see now. He hasn't even show the piece that feeds the motherboard. If its a copy of the OCZ one and it uses a dimm PCB that's more money

My guess is $125-175 if they ever sell

[Breathless]

I think it will be a bit cheaper than that. ;)

[Cranox]

Yeah , for the cool guys :cool: from Extreme Systems he shall make a special price :D

[reject]

by better i meant the unit is better not the price

[enzoR]

LOL yah right. This will cost minimum $100 and that is only if he gets them made in large batches. Just look at the components on there that we see now. He hasn't even show the piece that feeds the motherboard. If its a copy of the OCZ one and it uses a dimm PCB that's more money

My guess is $125-175 if they ever sell


LOL i doubt it. look whats all sitting on a motherboard :rolleyes:

it will probably be around 70 $

[NoX]

It will be cheaper in Europe than in US for sure because of the Euro/Dollar change.

[situman]

Hipro5 Keeping everyone in the suspense here. Wheres teh updates :(

[VoRtAn_MaDgE]

Let "THE MAN" do his job quietly! :)
There's a lot of different hardware...lot's of them work differently...if u guys want something perfect or almost perfect u have to be pacient...i know it's hard to wait but i hope the "waiting" will bring proficts to all uf us!
Don't forget burocracy too...the boring part no doubt!
Let Hipro work piecefully :D

[hipro5]

Hi there guys......... :D

1. The price will be over 100 Euros that's for sure coz there are too many components in the cirquit.......

2. Some changes on mainboard for now and VERY future applies took place.........You'll buy something today and you'll have it for many years and with many setups........So I think that the price will be OK and I'll trying to "squiz" it us much as possible......... :)

3. The users from : a. Thelab.gr b. Xtremesystems and c. Xtremerecources will have a discount....... :D

4. Me and OCZ working on a "formula" so as to figure out how this product will come out without harming anyone (OCZ or anyone else) as for legal issues etc......Of course if it finally works out , the credit will go to : Ryan from OCZ for his help and patient , saaya for his help and someone who did help a lot..... ;) :)

5. I've fed my Rams up to 3.82Volts till now........Shi(f)t I'm starting to afraid of the high Voltage - too high - ........ :D

[LowRun]

:banana:

It would be great if an agreement would be found that please everyone.

Way to go Hypro5.

Speechless

[hipro5]

:banana:

It would be great if an agreement would be found that please everyone.

Way to go Hypro5.

Speechless

Thanks M8...... :toast:

[hipro5]

Ahhhhh.........I forgot to mention that the BLUE led displays cost a lot more than I though........They cost 10 : 1 to the red-green-yellow ones........Too much so I droped the order.......I'll try to find them cheeper from somewhere else though........

[Jack]

Just read the whole thread and "impressive" is such an understatement :slobber:
Definitly awesome work mate :toast:

And more than 100 euro seems totally reasonable, looking at how much time and effort is put into this amazing piece of hardware :)

Gonna need one myself too :D
have to fix that :banana::banana::banana::banana:ing VTT

[WesM63]

So whos goingt to be the first person to try the "4.22v" setting? ;)

Good work hipro, keep us updated. I have a spot all warm and ready for it.

[Breathless]

how much is 100 euros, i'm unfamiliar with euros. :confused:

[Jack]

about 110 us dollars :)

[hipro5]

So who's going to be the first person to try the "4.22v" setting? ;)

Good work hipro, keep us updated. I have a spot all warm and ready for it.


NOT me for sure.......UNLESS I find a crapy Ram module which wishes to be burned........ :D

[WesM63]

NOT me for sure.......UNLESS I find a crapy Ram module which wishes to be burned........ :D


LOL, I have a few sticks here I'd give it a go on ;)

[LowRun]

Ahhhhh.........I forgot to mention that the BLUE led displays cost a lot more than I though........They cost 10 : 1 to the red-green-yellow ones........Too much so I droped the order.......I'll try to find them cheeper from somewhere else though........

Do you mean 10€?

I know a guy that sell some blue leds on a board here, the blue ones in 3 and 5 mm cost 1€, let me know if you want me to buy some and send them to you cos' i would gladly do so. If there is something specific about the leds you search let me know too, i'll see if the guy can have them.

[hipro5]

Do you mean 10€?

I know a guy that sell some blue leds on a board here, the blue ones in 3 and 5 mm cost 1€, let me know if you want me to buy some and send them to you cos' i would gladly do so. If there is something specific about the leds you search let me know too, i'll see if the guy can have them.

Thanks...........I said blue LED DISPLAYS not blue LEDS....... ;)

[situman]

It doesnt have to be blue. Red is fine too. Even orange, purple...it only matters how well it functions.

[LowRun]

Thanks...........I said blue LED DISPLAYS not blue LEDS....... ;)


:doh:

My bad, stupid me.

[iceman2g]

So whos goingt to be the first person to try the "4.22v" setting? ;)

Good work hipro, keep us updated. I have a spot all warm and ready for it.

4.22v would probably just not boot. ;) Depending on your memory 4v is do able. Max i've done was 4.1v. These were with BH-5 on a Infinity.

[Cranox]

Thx 4 the update Hipro5 :up: ( u maybe can make a limited edition with the bleu leds ;) )

[hipro5]

Thx 4 the update Hipro5 :up: ( u maybe can make a limited edition with the bleu leds ;) )

;) You are in my mind Cranox........ :D

It will be a limited edition with blue led displays and blue-red leds(coz green with blue just doesn't fit together)........ ;)

[Spec3]

So whos goingt to be the first person to try the "4.22v" setting? ;)

Good work hipro, keep us updated. I have a spot all warm and ready for it.

I've run 4.3V into some ram......it's still semi-alive now :banana:

[hipro5]

I've also fed my Rams with 5+ Volts BUT by mistake......When I used to work with the EPOX mobo 4PCA3+ which feeds the Rams via the 5Volts line , an output Mos-Fet was burned - shortcirquit - and the 5Volts line(5.55V accualy) fed my Rams for about a minute or two till I figure out why I had all those errors on Memtest-86 I was runing that time at even below 200MHz...... :D

They are still alive though..... :D ;)

[situman]

still waiting for the word on where to order one :)

[Unoid]

Great work hipro, Any idea if this will work fine on the dfi infinity nforce 2?

[hipro5]

We will see about the compatibilities with different mobos..... ;)

In case that someone wants to feed 4 x 256MB or 4 x 512MB Ram modules , there is ALSO a way to do so with soldering on the motherboard 3 (three) cables........ ;)

[Gamer]

about 110 us dollars :)

$ 121 to be exact.

[situman]

does this mean it should be retailing soon?

[cetoole]

Are there more pictures coming soon?

[situman]

gosh im so anxious

[LDK]

Looks really interesting
Might get one when you have final price :D

Again, great job hipro :toast:

[rhino56]

why did it seem like the switches were upside down to the led readout?
it is one of the coolest inventions ive seen yet out there.
great work, and even greater work on keeping the wife.

[The Mofo]

Waiting for ordering information :toast:

[kraggy]

wow! I leave for few months and come back to find out that Hipro is an evil scientist!!!!!

Daa--aang bro! I want one.......NOW! :p:

[hipro5]

Thanks guys......... :D :toast:

[hipro5]

why did it seem like the switches were upside down to the led readout?
it is one of the coolest inventions ive seen yet out there.
great workQUOTE]

Switches will not been seen with the front face of the panel so there is no problem about it...... ;)


[QUOTE=rhino56]
and even greater work on keeping the wife.

:D Yes indeed..... :)

[hipro5]

wow! I leave for few months and come back to find out that Hipro is an evil scientist!!!!!

Daa--aang bro! I want one.......NOW! :p:

:D :toast:

[BALDY]

wow! I leave for few months and come back to find out that Hipro is an evil scientist!!!!!

Daa--aang bro! I want one.......NOW! :p:


More like a MAD scientist :D

But thats a good thing!!! :toast:

[Riemen]

No, he's evil, cause he kills little poor cute Ram-Chips :D

Great job. Reserve one of your blue display special edition for me.

[kraggy]

No, he's evil, cause he kills little poor cute Ram-Chips :D

Great job. Reserve one of your blue display special edition for me.

I would like a blue led one too Hipro buddy! Remeber me from OCforums? Krag?? I used to be a Intel freak but now that I have a FX-53 I aM A amdROID!!

[hipro5]

I would like a blue led one too Hipro buddy! Remeber me from OCforums? Krag?? I used to be a Intel freak but now that I have a FX-53 I aM A amdROID!!

:D Hey krag.........What's up my friend?.......Everythings OK?......... :toast:

[hipro5]

BLUE Led Displays finaly have been ordered....... ;)

[kraggy]

:D Hey krag.........What's up my friend?.......Everythings OK?......... :toast:

Indeed M8! This FX-53 gives me some "INSANE" memory badwidth on air!!!! I can't imagine wht it would do with your little toy!!!!!! I am thinkin' really hard about getting soem Gskill pc4800!! wOOOOt! :banana4:

[situman]

I guess the device will retail soon?

[Arnar]

do you have some homepage where you can order this from.. or will we have to just PM you here

[hipro5]

do you have some homepage where you can order this from.. or will we have to just PM you here

There are two online stores here in Greece where you will be able to order them from and there will be one in Austria , one in Australia ,one in USA and one in Canada - for the time been - where you will also be able to order it online....... ;)

[Detract]

Do you have an ETA yet?

[Stang_Man]

hipro, sweet work!!

wondering if you got any other pics of the unit??

[Vryada]

P.S. Computers suck our lifes........ :D
rofl! so fu***ing true!!!!

that just rocks man. congratulations!!!

[reject]

There are two online stores here in Greece where you will be able to order them from and there will be one in Austria , one in Australia ,one in USA and one in Canada - for the time been - where you will also be able to order it online....... ;)
Australia nice!!!!!! is it pccasegear.com?

[BALDY]

one in USA ;)

Can't wait :usa:

[Susquehannock]

:toast: :up:

[quick]

i'm ready to get buy one :banana: :banana:

[blander]

There are two online stores here in Greece where you will be able to order them from and there will be one in Austria , one in Australia ,one in USA and one in Canada - for the time been - where you will also be able to order it online....... ;)

i will also order in switzerland :D

[Pefen]

:banana: Wonderfull stuff :banana:

I will definitly order one :D

[masterpain]

you got me, i want one of these maximizers.
great work. :banana:


and there will be one in Austria ;)

which shop is it?

[Stang_Man]

hipro, your pm is full.

[texuspete00]

hipro, your pm is full.

Lol... thats funny... because the limit here is like 500 or so. :p:

Looks like hipro might sell a few of these :D

[hipro5]

Hi there guys..... :)

Yes PM's inbox is full....I'll clean it up ..... :D

I would like to thank you for your support ....... :toast:

As for the online shops , I'll tell you as soon as I'm ready......I'll give you links of them......Another two have been added...... ;) :)

This week we will have some UPDATE...... ;) :)

[BALDY]

hipro5, I think your wish came true. Look here (http://xtremesystems.org/forums/showthread.php?t=43467) But wouldn't that kind of power be an overkill. :confused:

[PnoT]

I've been holding off on the OCZ unit for a while now hopefully this week we can get some shops to order from :) I'm sure they'll be sold out in the first few hours hehe.

[froudeg]

Very nice indeed hipro.

An idea for a future feature would be remote sensing - with long leads running from the unit to vdimm etc, there is going to be some drop across the lines under heavy loads....some remote sense wires for output tracking will sort that out.

One other thing, from my own experience of making small runs of custom pcb's - with the sheer number of hand only solderable components, which robotic assembly machines cannot cope with - productions costs are going to be rather high...unless you plan to hand solder them all yourself, which will take hours per unit.

Robotic assembly nowadays consist of pick and place machines, which mainly handle SMT components only - anything that isn't SMT or bulky, tends to be hand soldered at the end of the production line - if most/all the design is non SMT, costs will be high.

Altho you have probably looked into this side of things anyway.

[hipro5]

Very nice indeed hipro.

An idea for a future feature would be remote sensing - with long leads running from the unit to vdimm etc, there is going to be some drop across the lines under heavy loads....some remote sense wires for output tracking will sort that out.

One other thing, from my own experience of making small runs of custom pcb's - with the sheer number of hand only solderable components, which robotic assembly machines cannot cope with - productions costs are going to be rather high...unless you plan to hand solder them all yourself, which will take hours per unit.

Robotic assembly nowadays consist of pick and place machines, which mainly handle SMT components only - anything that isn't SMT or bulky, tends to be hand soldered at the end of the production line - if most/all the design is non SMT, costs will be high.

Altho you have probably looked into this side of things anyway.

Thanks for your thoughts......... ;)

Don't worry about assembling coz here in Hellas we have lot's of macines which can assemble either SMD components or "normal" ones....The cost it's about the same.....These are all organized don't worry........

As you propably not read well - or you just missed it - I wrote that the drop from zero Ampers to about 25 Ampers loads was 10mV and after that - with some improvements - it is now - I wrote it down too a long time ago - about 1.5 to 2.5mV.......Everything is taken good care of......... ;)

[froudeg]

Is that drop measured at the source, or after about a foot of wire, at the load?

[hipro5]

Is that drop measured at the source, or after about a foot of wire, at the load?

All measures where been taken on the pins of the DDR modules........ ;)

[Cornelious0_0]

I'm honestly not a huge poster around here, as I use XS as more of a resource then anything else...but I still and to stop in and give you a pat on the back hipro. :toast:

I live in Canada and I would be honor'd to be one of the first Canucks to own one of your beauties. Once you are able to disclose the name(s) of any canadian resellers you're working with I'd greatly appreciate knowing how it's gonna work out for pricing up here.

If someone could point me towards a VERY clear pic and/or guide for doing the OVP cut/mod on my Lanparty Pro 875B revB I woudl be very greatfull......hipro.....think I could do BETA testing with my Lanparty 875B?

[TEDY]

what's the price ?